Related
Hello,
I am looking firmware for Dapeng A8500 MTK6516 , I have access to recovery for the flash update.zip.
Please, I'm stuck on Android logo (loading ....)
Here is the "Version" information:
BB Chip: MT6516
MS Board: e1013-hjy1ctp
IMEI1:
IMEI2:
Modem Ver.: MAUI.10A.48.MP.V5.F1. 2011/01/27 16:48
Bar Code:
Build Time: 2011 08 20 15:04:44 CST
Uboot Ver.: 2010.06
Kernal Ver.: 2.6.32.9 ([email protected]) (gcc version 4.4.0 (GCC) ) #1 Sat Aug 20 15:03:38 CST 2011
Android Ver.: 2.2.1
SW Ver.: 10YW1048MP
agold info(F4): Sensor Main:gt2005yuv, Sub:gc0309yuv
Lcm:TRULY1P3827(SSD1963.WVGA)-#
thank you very much
I tried to install the update HD9 (MT6516) here:
http://www.filecrop.com/hd9.html
Installation start and there are error !
assert failed :getprop("ro.product.device") =="bird16_a10y"
installation aborted
Click to expand...
Click to collapse
the Dapeng is recognized by Windows but not recognized in the SDK,i cannot extract the informations.
I modified the update-script and the build.prop for rename in e1013_hjy1ctp.
And then re-signed with the signed-ROM ZIP_APK,rename update.zip,flash by recovery but now:
installation aborded
I have finally found
Dapeng technologie :
http://translate.googleusercontent....id=737&usg=ALkJrhhqd4y3wj958gw4WlUEbUxqM-pv3Q
Firmware Android 2.2 and tools Dapeng A8500 :
http://www.mediafire.com/?r2ks2wno5orl9lt
I successfully installed the recovery-update.zip STAR A3000, after boot simply press return/vol+ button to activate the return to confirm action,z4root,root explorer :
http://forum.xda-developers.com/showthread.php?t=1285573
How to flash MT6516 (tested no work on Dapeng A8500,i think the cause is my phone is semi-brick he can not start the Dapeng for the procédure ?) :
http://bm-smartphone-reviews.blogspot.com/2011/02/mtk-hd2-hd9-flashing-tutorial.html
Dapeng A8500 Android 2.3 ??? :
http://translate.googleusercontent....279582&usg=ALkJrhhcEkFeQl2VQL-o7GgSKF_-vgXaJQ
Hello,
I'm looking for how to make an update.zip with this firmware Dapeng.
Or how to extract the system.img of this firmware above.
Thank you for your help and sorry for my BAD English !
I gathered all the conversations in XDA about the Dapeng A8500:
jayguruson said:
Dear XDA Noobs and Gurus,
U have this lousy DaPang Dpad which I want to flash, restore, re-rom and just redo. I have managed to completely unlock it and root it but the rom is not available to be backed up or restored. I checked out the root folders and no rom. I have scoured the web and this forum for valuable information but have come up short...
I am unable to get to fastboot mode or find a rom manager that works with it. IF I press the power button, volume rocker up and the menu button, it takes me to "Factory Mode" which has, "Full Test", "Item Test", "Test Report", "Clear Flash", "Version" and "Reboot". Nothing else. I cannot seem to find a restore screen or find a way to restore/flash the original rom or even a new one. I have done my homework around this issue and if there is someone out there that might help me here, great, if not, I will keep plugging away.
Thank you for any help (in advance). Oh and Happy Holidays (Merry Christmas)!
Click to expand...
Click to collapse
cwkhong said:
wow finally i found someone with the A8500. i hope u guys can do something to this phone, basically to speed up / overclock it. that's all i want. sorry i can't help coz i m a NOOB with android.
---------- Post added at 05:06 AM ---------- Previous post was at 04:56 AM ----------
hey jayguruson if u press vol. up + power u will end up at the recovery mode, where u can flash / install 'update.zip' file. i tried to install DSP (equalizer) and uRevoke (some sort of custom recovery mode but were meant for a certain brand phone) but failed. it just stopped halfway. i also used titanium backup to save a backup file (update.zip..inside there is a META-INF and data files, is this the rom backup file?).
Click to expand...
Click to collapse
pyan68 said:
I finally decided to look at the datasheet after I couldn't find any useful info to overclock MT6516, & I don't think it can be done. MT6516's max speed is 416Mhz (not 460Mhz) and it's already set to run max speed by default. Even if we manage to configure the scaling governor, that would have been futile (unless you want underclocking )
It would be nice to hear opinions from the real experts here though.
Click to expand...
Click to collapse
cwkhong said:
i tried widget overclock. it shows 200+. am i right to assume that is the A8500 speed running. if that is the speed then it can be overclocked, probably to 400 or 500.
i also tried setcpu. it shows a reading of max speed about 500+ but it can't run, always FC.
my understanding is, if the stock rom can be re-packaged (hopefully with a customized 'kernel') and re-flashed back, then the rom will become a customized rom. and all overclock program will only works with a customized rom/kernel.
Click to expand...
Click to collapse
Spain forum :
http://translate.google.fr/translat...ro/forums/49-ROMs-Android-(61-1285)VSa&anno=2
Russian forum :
http://www.4pda.ws/forum/index.php?showtopic=273372
French forum :
http://forums.clones-chinois.com/sujet-1946-firmware-dapeng-a8500.html
update zip file
here's the titanium backup update zip file for whoever can make use of it. i m not very sure if it is the original rom file. i created it with titanium backup pro.
http://www.4shared.com/folder/q7JWoBJX/_online.html
i m also not very sure of this upload file. 1st time doing this uploading. i can't upload with megaupload and a few other becos my country malaysia had blocked those sites. so i hope those who have files for sharing can also upload to 4share. tq
Hi cwkhong ,
to start thank you,but the files that are needed is not in the update.zip titanium.
If you want, I will explain how to quickly extract the whole system of Dapeng it's very easy because I need it urgently
1)you need rooted your Dapeng with z4root in Dapeng tools :
(after installed z4root,execute click on permanent root and after the Dapeng re-boot and you rooted)
2)you need install RootExplorer in Dapeng tools.
3)Open RootExplorer and copy the file system (for copy you need long press on the file)
4)open file sdcard in RootEplorer and past,wait for the copy
5) you upload the file system
(Have no fear, no personal data is in system)
There is another way to extract all: boot.img, system, recovery.
This method by the SDK is very interesting in the future if you want to manipulate the system Dapeng and see many other things.
I think I'll need (boot.img) to create an update.zip for recovery by the Dapeng and to provide a ROM for other people who have blocked their Dapeng A8500.
1)you need rooted your Dapeng with z4root here in Dapeng tools :
(after installed z4root,execute click on permanent root and after the Dapeng re-boot and you rooted)
2)you need install the SDK on your PC,just copy SDK file in C:/ :
3)you go in Dapeng and active "débogage USB"in Paramètres/applications/développement.
4)now you follow this tutorial :
http://www.addictivetips.com/mobile...es-boot-recovery-and-system-partition-images/
Dapeng Tools :
http://www.mediafire.com/?rls7dii268spt6g
SDK :
http://developer.android.com/sdk/index.html
Merci beaucoup (Really thank you)
Et Bonne Année 2012 a la Malaysie de France
I tried to create with system HD9 test update.zip signed but an error with the installation.
Installation aborded
Click to expand...
Click to collapse
ok here is the file (/system) that i copied, i hope this is the one. http://www.4shared.com/zip/Y6wSPyz6/system.html
r u going to create a custom rom? or u unpack, edit, repack and reflash? so that means after this the phone can be overclock?
maybe u teach me how to unpack and repack the rom. i want clean out all those bloatware/rubbish in the original rom to become a clean light rom.
what is the 'recovery-update.zip' file i found in ur Star tools? is that a custom recovery mode that will overide the stock one?
i really hope u can make it. good luck
I tried to create with your system test update.zip signed but he start and after an error with the installation.
test-update.zip :
http://www.mediafire.com/?t131192nh9zjipz
-- Installing: /sdcard/test-update.zip
E:no misc partition
Finding update package...
I:Update location: /sdcard/test-update.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "e1013_hjy1ctp" ||
getprop("ro.build.product") == "e1013_hjy1ctp"
assert failed: getprop("ro.product.device") == "e1013_hjy1ctp" || getprop("ro.build.product") == "e1013_hjy1ctp"
E:Error in /sdcard/test-update.zip
(Status 7)
Installation aborted.
E:no misc partition
Click to expand...
Click to collapse
edit :To enter the recovery press Power+Vol + or Vol-
what now
sorry u didn't succeed in whatever u were doing. what now, friend? it is pretty quiet in here, don't u think so? just u n me...ha ha.
ok here is a query. i want to install/flash zip files from recovery mode but always ABORTED. i think it is becos those files r not SIGNED. how can i install/flash a custom recovery mode (like unRevoke or CLOCKWORK) over the stock one which will have a option of SIGNED or UNSIGNED zip files?
Hi,
I have Dapeng T8500 and i would like to replace the java to android.
Do i use this method please ?
whether i want to flash the rom how to put it into recovery mode ? (I have no flash cable and i would like to nflash by the sd)
Could you please help me ?
Thank
---------- Post added at 09:30 PM ---------- Previous post was at 09:07 PM ----------
Hi
I Have Dapeng T8500 with JAVA.
I don't know how to turn it into recovery mode. I use to press Power+Vol + or Vol-
but nothing happen. What can i do?
Thank
cwkhong said:
sorry u didn't succeed in whatever u were doing. what now, friend? it is pretty quiet in here, don't u think so? just u n me...ha ha.
ok here is a query. i want to install/flash zip files from recovery mode but always ABORTED. i think it is becos those files r not SIGNED. how can i install/flash a custom recovery mode (like unRevoke or CLOCKWORK) over the stock one which will have a option of SIGNED or UNSIGNED zip files?
Click to expand...
Click to collapse
Hi,
in the Dapeng tools there is a clockrecovery-update.zip, renamed update.zip, you copy your SD and get into the recovery to original flash update.zip.
Then to activate the button return to confirm press: Vol + and return to activate the confirmation button with return key.(insist if not work)
Now not need to sign update.zip for this clockrecovery but is tempory after re-boot not installed, look here:
http://forum.xda-developers.com/showthread.php?t=1285573
see you soon
speakers issue
hello there it's been awhile, any development?
anyway i wonder if there is a way to adjust the phone speakers setting, front and back. i find the sound loud but distorted, very high pitch near crackling. or maybe it is the speakers itself, poor quality. if so, is it possible to replace the speakers on my own without sending to phone shop. i have a few old phones with okay speaker quality.
that's it?
so nothing? it is frustrating to see improvements on those A1000,A2000,A3000..etc but nothing for A8500. guess i'll just use it as a phone, what a shame.
hi, i see you have updated the firmware to A8500 android 2.2 sucessfully.i just checked there is a upgrade version of A8500, called A8500+, it is android 2.3 with MTK6573, do you know whether your firmware can work in this phone?
2.3 update?
where is that a8500 2.3 update? my phone is mt6516. its different fr mt 6573 probably lower cpu. can u explain how to update?
Phone switch off when screen timed out
Hi,
I'm new to the forum. I have a chinese 5" tab cum dual sim phone branded as GAOLIN L5. The "Version" information:
BB Chip: MT6516
MS Board: bird16_a10y
IMEI1:
IMEI2:
Modem Ver.: MAUI.10A.W10.48.MP.V5.F1. 2011/01/27 16:48
Bar Code: 031400002704
Build Time: Fri Jun 24 11:18:08 EDT 2011
Uboot Ver.: 2010.06
Kernal Ver.: 2.6.32.9 ([email protected]) (gcc version 4.4.0 (GCC) ) #1 Fri Jun 24 10:39:23 EDT 2011
Android Ver.: 2.2.1
SW Ver.: 10YW1048MP
The phone goes off whenever the screen is timed out (say display time out at 30 seconds, then the phone shut off automatically after 30 seconds). Even, if I press the power off button to turn off the display, the phone goes off and never switched on pressing the power button. To switch on the phone, I have to re-insert the battery and then press the power on button.
Please advice me how to set the screen time out and power on problem. thanks.
Dapeng A8500+ MT6573 Bricked solid
Hi Bruno,
I happily used the phone for about seven months.
Everything was great until I installed ROM Tool Box, and as soon I installed some larger system font, the phone died instant death. I've tried flashing tools but, by using half a knowledge combined with even lesser:silly: patience, the result is that now I can't even get to the new Android boot logo. Here are the ROM details:
MS Board: e1103_v73_hjy1ctp
UBoot Ver.: 2010.06
Kernel Ver.:
2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Mon Mar 19 12:30:44 CST 2012
Android Ver.: 2.3.6
SW Ver. : ALPS.GB.FDD2.MP.V4.5
Custom Build : 1332139481.
I'm fully prepared to make a donation to enable you to carry on your great work for the community. One also must pay for the foolishness.
Best,
Lev.
Help Me
I also have problems with the phone model. Please help me. A8500
I'm posting this here since im not allowed to post in this thread (dont have 10 posts): Root MANY ANDROID! [Upd: 13.10.2012]
I have succesfully rooted my mt6577 GT-N9300+ Galaxy S3 smartphone clone by following the steps (at your own risk):
connect phone to pc by USB cable
install correct driver until it is shown in Device manager as a "Android Phone" - "Android Composite ADB interface". The driver can be easily found on the web if you search for "usb_driver_MT65xx_Android_.rar". If you don't know how to install a driver stop this procedure and learn windows.
Go to "settings" in your smart phone
go to 'SYSTEM' , 'developer options' and enable 'USB debugging'
go to 'PERSONAL', 'Security' and enable 'Unknown sources'
Follow instructions in Bin4ry's first post (here ) and start his procedure (runme.bat)
Choose number 1) 'normal mode' in this procedure
Your smart phone pops up backup/restore --> choose 'restore'
Let your smart phone restart
Your phone is rooted thanks to Bin4ry:good::good:
Root Bluebo L100
xdwhat said:
I'm posting this here since im not allowed to post in this thread (dont have 10 posts): Root MANY ANDROID! [Upd: 13.10.2012]
I have succesfully rooted my mt6577 GT-N9300+ Galaxy S3 smartphone clone by following the steps (at your own risk):
connect phone to pc by USB cable
install correct driver until it is shown in Device manager as a "Android Phone" - "Android Composite ADB interface". The driver can be easily found on the web if you search for "usb_driver_MT65xx_Android_.rar". If you don't know how to install a driver stop this procedure and learn windows.
Go to "settings" in your smart phone
go to 'SYSTEM' , 'developer options' and enable 'USB debugging'
go to 'PERSONAL', 'Security' and enable 'Unknown sources'
Follow instructions in Bin4ry's first post (here ) and start his procedure (runme.bat)
Choose number 1) 'normal mode' in this procedure
Your smart phone pops up backup/restore --> choose 'restore'
Let your smart phone restart
Your phone is rooted thanks to Bin4ry:good::good:
Click to expand...
Click to collapse
I have MT6577 Bluebo L100 S3 clone. It's not rooted but I'm concerned if I root it then following the above ( Bin4ry's ) it will restore phone so the IMEI will have changed etc and the phone will go back to stock or something. Can you let me know if after rooting and restoring the phone was as it was before but with root.
Thanks
Lee
Rooted okay!
athlonoc said:
I have MT6577 Bluebo L100 S3 clone. It's not rooted but I'm concerned if I root it then following the above ( Bin4ry's ) it will restore phone so the IMEI will have changed etc and the phone will go back to stock or something. Can you let me know if after rooting and restoring the phone was as it was before but with root.
Thanks
Lee
Click to expand...
Click to collapse
I have followed these instructions and have been able to root my phone without any problems. I have the MT6577 GT-I93000 which is also known as n9300+ Galaxy S3 clone. My only wish is that some develpoer can let us know if there will be any new ROM's made for this type of phone.
repoman2k11 said:
I have followed these instructions and have been able to root my phone without any problems. I have the MT6577 GT-I93000 which is also known as n9300+ Galaxy S3 clone. My only wish is that some develpoer can let us know if there will be any new ROM's made for this type of phone.
Click to expand...
Click to collapse
Thanks for the confirmation. But did your phone remain in the exact state after rooting, as it was prior to rooting. It mentions restore and I dread that it will restore the phone but I don't want it to do that.
Thanks for any more info
Regards
Lee
athlonoc said:
Thanks for the confirmation. But did your phone remain in the exact state after rooting, as it was prior to rooting. It mentions restore and I dread that it will restore the phone but I don't want it to do that.
Click to expand...
Click to collapse
Hi Lee,
I installed some apps and changed settings before rooting. After rooting nothing was changed. As far as i know it was not restored to stock. I think the backup/restore procedure is required to install the Superuser app correctly (correct me if I am wrong).
Sorted - just took a little courage to believe it would remain as it was but with root.
Superuser app installed and browsed root with root explorer.
Thanks
Lee
Need firmware mt6577 GT-N9300+ Galaxy S3
Hello friend,
I bricked my phone mt6577 GT-N9300+ Galaxy S3 and need its original firmware for reflash. can you provide me your firmware by backing up by SP Flash Tool. Please do the needfull. i am in trouble :crying:
xdwhat said:
I'm posting this here since im not allowed to post in this thread (dont have 10 posts): Root MANY ANDROID! [Upd: 13.10.2012]
I have succesfully rooted my mt6577 GT-N9300+ Galaxy S3 smartphone clone by following the steps (at your own risk):
connect phone to pc by USB cable
install correct driver until it is shown in Device manager as a "Android Phone" - "Android Composite ADB interface". The driver can be easily found on the web if you search for "usb_driver_MT65xx_Android_.rar". If you don't know how to install a driver stop this procedure and learn windows.
Go to "settings" in your smart phone
go to 'SYSTEM' , 'developer options' and enable 'USB debugging'
go to 'PERSONAL', 'Security' and enable 'Unknown sources'
Follow instructions in Bin4ry's first post (here ) and start his procedure (runme.bat)
Choose number 1) 'normal mode' in this procedure
Your smart phone pops up backup/restore --> choose 'restore'
Let your smart phone restart
Your phone is rooted thanks to Bin4ry:good::good:
Click to expand...
Click to collapse
Unable to root
I tried the same steps. I get the option to Restore data.. I click that and then the phone reboots.. everything completes and the command prompts asks to close the window by pressing any key..
However, SuperUser is not installed and the phone is not rooted.. What could be the problem here? I got this phone called Phecda i9300 from Amazon.. In About Phone, it shows as Alps GT-9300.. Any help would be appreciated..
xdwhat said:
I'm posting this here since im not allowed to post in this thread (dont have 10 posts): Root MANY ANDROID! [Upd: 13.10.2012]
I have succesfully rooted my mt6577 GT-N9300+ Galaxy S3 smartphone clone by following the steps (at your own risk):
connect phone to pc by USB cable
install correct driver until it is shown in Device manager as a "Android Phone" - "Android Composite ADB interface". The driver can be easily found on the web if you search for "usb_driver_MT65xx_Android_.rar". If you don't know how to install a driver stop this procedure and learn windows.
Go to "settings" in your smart phone
go to 'SYSTEM' , 'developer options' and enable 'USB debugging'
go to 'PERSONAL', 'Security' and enable 'Unknown sources'
Follow instructions in Bin4ry's first post (here ) and start his procedure (runme.bat)
Choose number 1) 'normal mode' in this procedure
Your smart phone pops up backup/restore --> choose 'restore'
Let your smart phone restart
Your phone is rooted thanks to Bin4ry:good::good:
Click to expand...
Click to collapse
Thanks a lot
Its work in My galaxy S3 clone.............. :laugh: :laugh:
najim017 said:
Its work in My galaxy S3 clone.............. :laugh: :laugh:
Click to expand...
Click to collapse
Did you try the exact same instructions? What type of phone do you have?
Help
Hardware : MT6577
Model : GT-I93000
Build number : IMM76D.I93000ZSALED.9P017.6628
Build date UTC : 20121016-085327
Android v : 4.1.1
Baseband v: -----
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Oct 16 16:50:37 CST 2012
Got softbricked. Help me unbrick.
help
edmo87 said:
Hardware : MT6577
Model : GT-I93000
Build number : IMM76D.I93000ZSALED.9P017.6628
Build date UTC : 20121016-085327
Android v : 4.1.1
Baseband v: -----
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Oct 16 16:50:37 CST 2012
Got softbricked. Help me unbrick.
Click to expand...
Click to collapse
i need the same :silly:
ercarly said:
i need the same :silly:
Click to expand...
Click to collapse
Me too !!
we have Jelly Bean, really .. and root procedure is ok for ics .. not jb
edmo87 said:
Hardware : MT6577
Model : GT-I93000
Build number : IMM76D.I93000ZSALED.9P017.6628
Build date UTC : 20121016-085327
Android v : 4.1.1
Baseband v: -----
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Oct 16 16:50:37 CST 2012
Click to expand...
Click to collapse
I have a S3 clone too (Triton) with Android 4.1.1 on it.
I want to root it as well, because I want to be able to install Titanium Backup to restore data from an old phone
(only data, no apps).
Did someone successfully root his phone with these settings ?
I've Feiteng GT-i93000 MTK6577 bought few days ago. As I wrote some posts up, I've this version:
Hardware : MT6577
Model : GT-I93000
Build number : IMM76D.I93000ZSALED.v20
Build date UTC : 20121229-070341
Android v : 4.1.1
Baseband v: MAUI.11AMD.W12.22.SP.V15, 2012/10/16 13:11
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Sat Dec 29 15:01:16 CST 2012
it's Android 4.1.1 .
I've tried :
- Root_with_Restore_by_Bin4ry_v18.7
- MTKdroidTools_v230 (created scatter file; temp root procedure start, but no restore button appears on the phone and it automatically reboots one time with no succes; backup button stays disabled!)
- manual root via adb, can't mount system (it says no mount available)
- SP_Flash_Tool_v3.1224.01.7 : loaded my scatter file and recovery.img CWM patched from Bruno .. but when I load scatter file I can see only 00 memory address only and no other address!
- Unlock root - no root
Someone can share other ideas for JB on this phone ??
HELP FOR FEI TENG GT-9300+ / i93000
4shared.com/rar/l9FMJRQk/i9300_codigo
Link from: Posted by Javijau. (TQ )
movilesdualsim.com/foro/threads/16887-FeiTeng-N9300-mtk6577/page11
THIS IS THE ROM (PERFECT FOR THAT PHONE in the topic).
MY brick problem was solved.
Saved a few backup in case anything happens again. Good luck. Anything, can pm me.
Hero 2000+ root simple fast less than 200second
Use this
http://forum.xda-developers.com/showpost.php?p=31545627&postcount=1
and download 7zip google it won't open with winrar some reason work son any device, without any stupid kind of holding volume key or any crap just simply plug in your phone on the normal screen and follow the instructions done and done.
xdwhat said:
i'm posting this here since im not allowed to post in this thread (dont have 10 posts): root many android! [upd: 13.10.2012]
i have succesfully rooted my mt6577 gt-n9300+ galaxy s3 smartphone clone by following the steps (at your own risk):
connect phone to pc by usb cable
install correct driver until it is shown in device manager as a "android phone" - "android composite adb interface". The driver can be easily found on the web if you search for "usb_driver_mt65xx_android_.rar". If you don't know how to install a driver stop this procedure and learn windows.
go to "settings" in your smart phone
go to 'system' , 'developer options' and enable 'usb debugging'
go to 'personal', 'security' and enable 'unknown sources'
follow instructions in bin4ry's first post (here ) and start his procedure (runme.bat)
choose number 1) 'normal mode' in this procedure
your smart phone pops up backup/restore --> choose 'restore'
let your smart phone restart
your phone is rooted thanks to bin4ry:good::good:
Click to expand...
Click to collapse
a huge thanks for u!!!! My s3 clone is rooted successfully!
Does someone know root this device 4.1.1? I will want to root it!
Sent from my GT-I93000 using xda app-developers app
Hi all,
Does someone know root this device 4.1.1? I will want to root it!
Sent from my GT-I93000 using xda app-developers app
Click to expand...
Click to collapse
the same here: real 4.1.1, unable to root
notice: when it reboots I have to unmount/mount the battery and manually restart the device (power button).
Any alternative?
thx
Since I am super noob in this forum, I will like to share the backup I made for the phone:
Hardware : MT6589M
Model : BLU DASH 4.5
Build number : BLU-D310i-V03-GENERIC
Build date UTC : 20130620-120506
Android v : 4.2.1
Baseband v: V0.0.5, 2013/05/25 14:20
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 20 20:02:55 CST 2013
LCD Driver IC : 1-otm8018b_dsi_vdo_djn
The reason is because I didn't found the stock rom for this phone and I know how easy we can brick our phone doing experiments with modified roms. The other reason is because I want that somebody can make a custom rom with this or can ported from others building a higher version like android 4.3 or 4.4.
This backup is made with the MTK Droid Tool, and can be use with the Flash Tool application.
The link for download is a mega folder containing the drivers for windows and the tools to install the rom back in the phone:
https://mega.co.nz
rest of the link:
/#F!bgBBDJoL!RzicYQbqwRF3cfyYYJ1rHg
The backup has root permission and cwm recovery and ziped with 7zip 9.30.
Hope this helps somebody with this device.
For install the stock rom:
Firts Install the drivers, I use w8.1 x64 and works perfect with the w7 x64 driver, firts connect the phone to usb and remove the battery, then put the battery again and it will install the driver.
Decompress the file: BLU-D310i-V03-GENERIC_Files_to_FlashTool_rooted_with_cwm.7z with 7zip 9.30, open the flash tool, load the file: MT6589_Android_scatter_emmc.txt, select recovery and system android, unselect the others and press the boton Download, remove the battery and put it on again, it will start the transfer.
For install the mod rom:
Once you hace the recovery cwm installed and rooted, you can install rom, firts copy the file: MERE_mod_BLU-D310i_ROM_signed_es.zip or MERE_mod_BLU-D310i_ROM_unsigned.zip into the sdcard, shutdown the phone, remove the battery, put the battery on and press the power button at the same time withe the volumen+ button, once in recovery mode wipe the factory and dalvi cache, then install the zip from sdcard.
This rom is a mod of the MERE rom from Team Epic with the fix of the camera to work with the model D310i.
Enjoy it.
thanx
ayuda blu advance brick
help me blu advance brockeado no avansa de la pantalla inicial
Your stock ROM worked like a charm! I recovered a Dash 4.5 successfully, and i loved MERE mod.
But everytime i try to use a SD Card, scard0 is swapped with sdcard1, 0 becaming external and 1 as internal storage. Someone know how to prevent it?
att.
Hi!
I have an android tablet but I don't know exactly what device it is. Here is everything what I have found:
-Brand: RK3026
-Model: Q8
-Android: 4.2.2 (SDK: 17)
-Kernel: Linux version 3.0.36+ ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) #69 SMP PREEEMPT Thu Jan 16 15:50:05 HKT 2014
-Number of the version of the software: rk3026-eng 4.2.2 JDQ39 eng.lijian.20140107.155201 test-keys
-CPU Model: Rockchips Cortex-A9 (Dual Core, freq: 312-1008MHz)
-Renderer: Mali-400 MP
-Resolution: 800x480
-Rear and front camera: 1,9 MP (1600x1200) and 0,3 MP (640x480)
-Ram: 512MB
-System storage: 0,98GB
-Internal storage: 1,90GB
-GPU version: OpenGL ES 2.0
Also I got some manual but there was only "MID Android". Tablet looks like THIS.
First I rooted my device with chinese program called Vroot. Then I installed TWRP and I made backup with it. Then I tried to flash this rom (made by Cash1977) but I didn't flash it with kernel partion so I ended up to a bootloop. Then I tried to restore TWRP backup but the I noticed that it was not proper. The system part size was only 4kt. When I did restore backup my TWRP said "no os installed are you sure you wish to reboot". When I rebooted it ended up to a bootloop again.
Then I tried to flash this rom (made by Oma) but it didn't work. I used rkandroidtool v1.37. First I think that I used wrong kernel so I tried with several kernels and got messed up device badly. I almost bricked it once for good but then I tried different tool called androidtool v2.1. Then I flash with Cash's rom and this kernel (3.0.36+ (lijian) #69) and device booted up nicely. Only porblem is now that wifi is not working
The issue: If I try to turn wifi bar on it will automatic slide to off position. It says that "turning wifi on" but nothing happens. When I go settings>advanced I noticed that mac address is unavailable. Also when I go settings>about tablet>status I found put that imei is unknow.
So far I have tried to flash different rom (the oma's one again) and it works perfectly but wifi not. I have also tried to restore my TWRP again but it says "no os installed". I have also tried to wifi fix app and FXR wifi fix app but they are not helping. FXR wifi fix stops when it says "reading profiles". Can anyone help me?
EDIT: I find this thead and there is the same problem! How I can find those same files (libhardware.so ,libhardware_legacy.so , rkwifi.ko, wlan.ko and 8188eu.ko) for my device. Is the any change that thay still are there somewhere in my TWRP backup?
EDIT2: I think that I find the problem. When I go to the /system/lib/modules/ I find there file named "rkwifi.ko.3.0.8+". I'm using kernel which is 3.0.36+ so I need module for 3.0.36+, right?
EDIT3: Here is the answer to my problem:
"Idea for fix wifi
Check in your stock. If your stock rom run module diver on environment with 3.0.36+ of wifi driver you must replace files to custom rom.
how to:
1. Replace libhardware.so and libhardware_legacy.so from stock rom in /system/lib/
2. Replace module driver files from stock rom in /system/lib/modules/
-8188eu.ko
-8188eu.ko.3.0.36+
-8192cu.ko
-8192cu.ko.3.0.36+
-rkwifi.ko
-rkwifi.ko.3.0.36+
-wlan.ko
-wlan.ko.3.0.36+
3. If another wifi chip make the same too for environment with 3.0.36+
4. If stay problem. to replace all files in folder /system/etc/firmware from stock rom to custom rom folder /system/etc/firmware
Hope to fix your problem.
sorry for bad english language.
Anucha. " Origanlly posted here
Where I can find those files for my device? Can I use just any file named like above?
Solution: Turns out that that my wifi is actually Atheros AR9271 so all I need to do was flash Oma Cube U25GT2-H JB v1.0 rom with my genuine kernel. Everything is working now!
Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/showthread.php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
Hi,
You could ask for thoughts in the similar watermark thread you linked, or try asking for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!