Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/showthread.php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
Hi,
You could ask for thoughts in the similar watermark thread you linked, or try asking for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Related
My phone just crashed, it's restart the system several time when i try to start the phone. A month ago, i use root my phone to install some application but when i entering rooting explorer mode on file "System", accidentally i change the system folder attribut to rw-- r--- r--- the phone going freeze for several minute then restart..after that, the phone won't to start anymore.
I had enter the factory mode, restore user data from last backup, it's still not working. Clearing Flash not help me too, it's still fail to start. Please anybody can help me how to resolve this issue??:crying:
Here is the phone version from factory mode :
BB Chip : MT6573
MS Board. : e1108_v73_jbl1flash8p4_extreme
IMEI1 : 355333685002111
IMEI2 : 355333685002129
Modem Ver. : MAUI.11AMD.W11.37.SP.V17.F1. 2012/03/20 18:09
Bar code : 0417JL5-8_024237
Build Time : 2012 06 27 17:44:00 CST
UBoot Ver. : 2010.06
Kernel Ver. : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) #1 PREEMPT Wed Jun 27 17:39:38 CST 2012
Android Ver. : 2.3.6
SW Ver. : ALPS.GB.FDD2.MP.V4.5
Custom Build Verno. : 1340789993
LcmCam Info : Camera Main : ov5640raw, Sub : hi704yuv Lcm : RX_50NT_323A
Touch Panel : FT5406
I'm a newbie to android platform. I came to know from a source that installing busy box upgrades kernel.
So i foolishly installed busybox to System/lib through smartintall. :crying: After that Accidentally i Unrooted my device (yeah it was rooted already wid rootgenius kingtool app). Now i'm not able to root itagain nor i'm able to restore it. if i try to restore sum of the sensors misbehave. :crying: (if i hdn't made a backup)
Pls expersts help me regain root access to my droid. And restore replaced system/lib files.
Here is my Device Details.
Hardware : MT6577
Model : B63
Build number : e1911_v77_mg_s05g_9p017_6628_20121229
Build date UTC : 20121229-054615
Android v : 4.1.1
Baseband v: MAUI.11AMD.W12.22.SP.V15, 2012/10/16 13:11
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Dec 27 19:50:40 CST 2012
Kernel Version 3.4.0
Total ram 500mb.
Since I am super noob in this forum, I will like to share the backup I made for the phone:
Hardware : MT6589M
Model : BLU DASH 4.5
Build number : BLU-D310i-V03-GENERIC
Build date UTC : 20130620-120506
Android v : 4.2.1
Baseband v: V0.0.5, 2013/05/25 14:20
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 20 20:02:55 CST 2013
LCD Driver IC : 1-otm8018b_dsi_vdo_djn
The reason is because I didn't found the stock rom for this phone and I know how easy we can brick our phone doing experiments with modified roms. The other reason is because I want that somebody can make a custom rom with this or can ported from others building a higher version like android 4.3 or 4.4.
This backup is made with the MTK Droid Tool, and can be use with the Flash Tool application.
The link for download is a mega folder containing the drivers for windows and the tools to install the rom back in the phone:
https://mega.co.nz
rest of the link:
/#F!bgBBDJoL!RzicYQbqwRF3cfyYYJ1rHg
The backup has root permission and cwm recovery and ziped with 7zip 9.30.
Hope this helps somebody with this device.
For install the stock rom:
Firts Install the drivers, I use w8.1 x64 and works perfect with the w7 x64 driver, firts connect the phone to usb and remove the battery, then put the battery again and it will install the driver.
Decompress the file: BLU-D310i-V03-GENERIC_Files_to_FlashTool_rooted_with_cwm.7z with 7zip 9.30, open the flash tool, load the file: MT6589_Android_scatter_emmc.txt, select recovery and system android, unselect the others and press the boton Download, remove the battery and put it on again, it will start the transfer.
For install the mod rom:
Once you hace the recovery cwm installed and rooted, you can install rom, firts copy the file: MERE_mod_BLU-D310i_ROM_signed_es.zip or MERE_mod_BLU-D310i_ROM_unsigned.zip into the sdcard, shutdown the phone, remove the battery, put the battery on and press the power button at the same time withe the volumen+ button, once in recovery mode wipe the factory and dalvi cache, then install the zip from sdcard.
This rom is a mod of the MERE rom from Team Epic with the fix of the camera to work with the model D310i.
Enjoy it.
thanx
ayuda blu advance brick
help me blu advance brockeado no avansa de la pantalla inicial
Your stock ROM worked like a charm! I recovered a Dash 4.5 successfully, and i loved MERE mod.
But everytime i try to use a SD Card, scard0 is swapped with sdcard1, 0 becaming external and 1 as internal storage. Someone know how to prevent it?
att.
Hi guys,
short backstory:
I was asked to look for a smartphone to use outdoor, I (unfortunately) picked the IceFox Razor and now we got a bunch of them. Unluckily, I later noticed that those phones come with malware (or something similar), they download and install apps on their own. I couldnt fix that by myself, even after hours of trying.
What I've tried so far:
I gained root access in the shell using the MTK Droid tool and SP flash tool, but guess what: neither the SuperSU nor any other app actually have root permissions. I even tried different SuperSU versions.
Since I am not a programmer and since I only have very little knowledge of Linux, I am stuck now. I dont even know what to actually search for in the webs.
Hardware and software:
Code:
Hardware : MT6582
Model : RAZOR
Build number : ICEFOX_RAZOR_20140919
Build date UTC : 20140919-115900
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V39, 2014/08/06 02:14
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Sep 19 19:56:16 CST 2014
I appreciate any hint and help!
Hi, thank you for using XDA Assist. I can't find anything specific to your device. but I did find this for your chip set, http://forum.xda-developers.com/showthread.php?t=2574315 It may work on your device, but obviously, no guarantees.
Hi
I have Samsung Grand Neo GT-I9060 It wasn't work correctlly so I just downloaded Flash file and flashed it with SP Flash
if i use any downloaded file with its scatter file i get error MTP Changed, It must be downloaded and if i use my Scatter file with any file it flash it without errors. so I opend MTKDroiedTools and get scatter file for my device and then used it to flash downloaded file
flash complete without errors but my device doesn't boot any more this is what i get when turn it on
(Sorry i can't post photos because i'm new so please just add 'com' after tinypic. to get the right link)
i68.tinypic./3509kd1.jpg
and when turn it off and charching get this
i64.tinypic./29w1rih.jpg
on the back of device is show it's GT-I9060
i66.tinypic./2vhz09s.jpg
but when check it with MTKDroiedTools it show this
Hardware : MT6575
Model : GT-I9082
Build number : ALPS.JB.MP.V1.16
Build date UTC : 20151106-003404
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V23, 2014/11/29 16:46
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 Fri Nov 6 08:29:57 CST 2015
Click to expand...
Click to collapse
I tried to flash it with option Format All + Download but it give me error
S_DA_HAND_FLASH_NOT_FOUND
Click to expand...
Click to collapse
I tried it with Meta Driver Mode give same Error
I Downloaded many files all give same erros and i don't know what to do now
It's my friend phone and he wanted me to fix it but i just bricked it.
I hope will find help to get it work again
Thank you
Update
After many tests now it's running but screen is black, white, coloured vertical bars, I hope it's now easier to fix?
(Please remove spaces to get right link)
http : //sendvid . com/x3lnu0s0[/url]
More Info
Now I just made Screenshots for mobile (without see anything just guess everything position and tab it)
I noticed that when I go to system settings screen goes horizontally but when go to main menu goes normal
I remember system properties and now I'm sure the system is exactly same as original
so where is the problem?
i63. tinypic. com/15oc684.jpg
i64. tinypic. com/2lm2jd3.jpg
i65. tinypic. com/2lc72n4.jpg