Database Info

i could not find answer any whare

i tried to update the Samsung note 10.1(GT-N8010) with KIES due to internet connection
it failed after 18%. after 2 hours it's display stopped working. i can unlock note increase
volume decrease it even touch sensors in screen works but i can not see any thing just black
i even tried to unplug and plug the ribbon but problem is still there.

Sir,
Please wait until mods will move this thread to the device specific forum.
For reply or more questions please register an account on XDA forums.
Stand by
Good luck

Nexus 5 Problems: Static Screen.

Hello
The post is regarding the problems I've recently been facing with my phone, nexus 5.
I installed MM about a month ago and my nexus was working perfectly. However, after two weeks of the installation, my power button got extra sensitive and the phone would sometimes get into infinite rebote loops. I contacted Google and they said that it might be the faulty power button and asked me to factory reset. After factory reset the problem aggravated. In fact after two days of reset my phone would shut down and when I turn it on (through recovery) it will show Static noisy screen. Soon I figured out that if I allow my battery to deplet and attach it with charger, I can turn my phone on. However, as soon as i allow display to sleep, the problem begins again. When the phone sleeps, and I press the power button to wake it up, it shows noise.
So, I have increased the sleep time of my phone to help it stay alive for sometime while I look for a solution.
I would like to know, what according to you can be the problem? Is it the software or the display driver? Or is it the USB cable flex ( which can be the cause of problem as I read it somewhere)
I would be very grateful if you could guide and help me
Best regards.
Sidra

I am having the same issue. May I ask if you found a solution?

HI, I have the same problem....please can someone help us out here. Thanks

Sounds like it's the hardware causing the issue, not anything software/firmware. A new power button is extremely cheep off eBay (seriously, they sell them in bulk), so if you're not squeamish about opening your phone up, it might be worth the small cost for a new internal switch to see if this solves the issue. Go to ifixit.com for a teardown guide.

[Completed] Android black screen?

Dear people,
I need some help, i've tried googling it but i am not sure if i have the same problem.
There are a few similarities but i am not sure if i have the same problem.
Phone: Huawei ascend mate 7
OS: Android 5.0 or 6.0 i think.
Status: Not rooted.
Warranty: i might have a few months left if i am right.
Problem:
My phone have always worked. It's summer here and it is hot over here.
Before i slept it worked without any problem.
When i woke up, i've noticed i slept on it with my back and saw some sweatdrops on my screen(Not sure if it went internally).
It's fully black screen, I can call myself, it's vibrating. It is suddenly not recognized anymore when connected to my laptop (F instead of ascend mate 7 or something like that.
It seems when pressing the volume down + power button that it turns off as the connection to the laptop gets off and a few seconds later back on.
But still the same problem occurs.
The only difference i have noticed SOMETIMES when pressing a button the screen goes on. For like a second or two max, but then it's back to black screen again.
I've had a little scratch on my touchscreen but i never had any problem with it. It's also barely visible.
I hope someone can help me!
Kind regards,
Mr. sweatback.

Hello and thank you for using XDA Assist,
please create an account and ask your question here:
Ascend Mate 7 Q&A, Help & Troubleshooting
The experts there will help you.
Kind regards
Trafalgar Square
XDA Assist

[Completed] Screen flickering Meizu m2 note

Hello, I actually have a small problem on my phone.. I searched for the solutions but I am unable to find a reliable fix.. Everybody has a quite different type of this problem..
Phone model: Meizu m2 note
Previous os : Flyme 5(stock)
Current OS: Cm 12.1 (by Moyster on xda)
SCREEN FLICKERING
Well, before I start I would like to say that my phone has actually survived a water bath.. The phone fell in the swimming pool when my friends were trying to click a pic.. It didn't switch on, on the same day, but I disassembled it completely, and let it dry for a week.. Later the phone worked completely fine.. It's been 3 months since the incident...
Well the problem now is the SCREEN FLICKERING.. I guess It has nothing to do with the water damage cause that was almost 3 months back and this problem started around a month ago, when I was on flyme 5. And nope, the phone has never fallen off my hands.. The phone works fine for maybe the first 30 minutes after keeping it idle for a long time... The screen flickers even during the bootup, fastboot, and even in recovery..
I have two Meizu m2 note in my home.. The other one is my mom's phone.. And I almost update same roms on both the phones.. And my mom's phone is working completely fine and not facing this problem.. I don't have a warranty for this anymore, but I can still give it to the company's service center.. The main reason I posted this thread is because I just wanna know if this is a software or a hardware problem.. Cause in few other threads they said that this had sumthng to do with the kernel and stuff.. I don't wanna leave my phone at a service center for 2 months if this is fixable at home..
Not the complete screen flickers, but only the upper top part of the screen..
I have attached a YouTube link for a perfect view of the screen.. The phone on the video is my phone..!
https://youtu.be/Bw1QVspTw7M
I would really appreciate if you would help me on this.. thank you.. :victory:

Hello and thank you for using XDA Assist,
please ask here:
Android Q&A, Help & Troubleshooting
Best regards
Trafalgar Square
XDA Assist

Starting problem

Hello, after screen replacement, mother board flex replacement, when I start the phone I have nothing on the screen running only a red and green light on the top of the phone. I have disconnected the battery and load again but still the same. I tried power and volume down or up but still the same problem. I try with other screen but the problem is still there. Some people can help me in the diag and solution to resove ?
Many thanks for your help

I maybe have the same problem on my BKL-L09, my phone just show the screen a split second and then it is black screen all the time. I started having these problems after I installed the latest magisk (The old v.17). And also, I can get to TWRP anymore, both official and unofficial TWRP. I'm guessing it's the internal partition problem (funkyhuawei's unbrick service shows all the partitions). I guess we just gonna have to wait for the Honor View 10 SP Flash Tool or something... (BTW, I already know the tool : https://forum.xda-developers.com/ho...ol-tool-one-driversunlocktwrpfactory-t3776736 but, it is not supported yet.) I hope someone does it fast and for free if possible, because we're community and if someone is having the same problem, we can easily help them. And that is what community does.

deuxsacsatrois said:
Hello, after screen replacement, mother board flex replacement, when I start the phone I have nothing on the screen running only a red and green light on the top of the phone. I have disconnected the battery and load again but still the same. I tried power and volume down or up but still the same problem. I try with other screen but the problem is still there. Some people can help me in the diag and solution to resove ?
Many thanks for your help
Click to expand...
Click to collapse
bring it back to the person who repaieed it