Hi,
I flashed on my SM-T805 with wifi and LTE the new Ironrom 2.5 . On my first try something was damaged, dont know why and what. Then via Downloadmode TWPR 2.5 with autoroot. Now I wiped everything in TWRP and after that I wiped the System via advanced...
Of course I have a backup, done with TWRP 3. I restored it but it also didnt worked. After a reboot I just get the Samsung Logo with the flying Pixels. Maybe a Bootloop?
After that the wiping Session again, flashing Samsung Firmware, flashing Iron Rom 2.5.
Now I waited endless just with the Logo and after that - maybe 20 Min or longer - was the first start of Iron Rom. After a new reboot again: Just the Samsung Logo till the akku was empty....
a.) How I'm able to format delete ALL? Or what should I do?
b.) could it be that the Backup didnt restored correctly cause it was made with TWRP 3 and restored with TWRP 2.x? Dont think so...
But who knows...
c.) does anyone know a functional Cyanogen for the SM-T805?
Please give me links too (ROMs, Tools, etc) in case of an answer.
Thank you in advance, good times and peace
Follyx
ADMIN: Sorry was the wrong Forum. Put it in the Q&A. Please delete here.
Related
Hello, i am android newbie, but i use my 5801 for a few months. But with help of this forum i make from my stock phone pretty good machine for me. Everything was perfect, i instal cwm,root, kernel g3 2.4 oc,setcpu, bassbeats,... A still no problems. But two days back i tried to instal BLN via SGS kernel flasher within android. During flashing kernel it was o.k. but at the end phone freeze a take did not reboot. Just screen stay for 10 min same. So i decided to hold power button and turn off phone. After that all the user apps were gone. So i decided to recovery via cwm from backup. after that phone started , still no user apps, only system apps and no possibility to install anything cause task manager in phone showed 0kb data , like rom was not mounted or i dont know... I started panic and wipe everything boot, cache, sd,data ... just all. And reflash kernel 2.4 back to stock
After done that it was totally in ....hole. Phone could boot to recovery but, could not start android. Just logo "samsung" is still on the screen. I tried to instal firmware( samsung 5800 xwjpi with files sbl.bin and boot.bin through odin but still same...Only boot animation is changed now...And still is just shining "samsung" logo. Is there any chance to repare that? I think i should install bootloader but i am not sure how. Or is it automatically doing by flashing rom? Pls help if u can. Many thanks.
lumen2012 said:
Hello, i am android newbie, but i use my 5801 for a few months. But with help of this forum i make from my stock phone pretty good machine for me. Everything was perfect, i instal cwm,root, kernel g3 2.4 oc,setcpu, bassbeats,... A still no problems. But two days back i tried to instal BLN via SGS kernel flasher within android. During flashing kernel it was o.k. but at the end phone freeze a take did not reboot. Just screen stay for 10 min same. So i decided to hold power button and turn off phone. After that all the user apps were gone. So i decided to recovery via cwm from backup. after that phone started , still no user apps, only system apps and no possibility to install anything cause task manager in phone showed 0kb data , like rom was not mounted or i dont know... I started panic and wipe everything boot, cache, sd,data ... just all. And reflash kernel 2.4 back to stock
After done that it was totally in ....hole. Phone could boot to recovery but, could not start android. Just logo "samsung" is still on the screen. I tried to instal firmware( samsung 5800 xwjpi with files sbl.bin and boot.bin through odin but still same...Only boot animation is changed now...And still is just shining "samsung" logo. Is there any chance to repare that? I think i should install bootloader but i am not sure how. Or is it automatically doing by flashing rom? Pls help if u can. Many thanks.
Click to expand...
Click to collapse
Try to wipe data and cache
DoR2 said:
Try to wipe data and cache
Click to expand...
Click to collapse
Already tried. No improvement. Bootlooping(?) screen again and again for 15 min.
lumen2012 said:
Already tried. No improvement. Bootlooping(?) screen again and again for 15 min.
Click to expand...
Click to collapse
Try flashing cm 7
hey..... dont forget to thank me!!!!!!!!
So, it looks problem is solved. I tried to flash froyo kyrillos rom 9.7 and phone finally works. Now I only need to solve problems with freezing, after flashing it happens two times during one hour Updating to 9.7.1. actually not possible cause download servers down...Maybe tommorrow. And why did you say i should install just CM 7 ?
lumen2012 said:
So, it looks problem is solved. I tried to flash froyo kyrillos rom 9.7 and phone finally works. Now I only need to solve problems with freezing, after flashing it happens two times during one hour Updating to 9.7.1. actually not possible cause download servers down...Maybe tommorrow. And why did you say i should install just CM 7 ?
Click to expand...
Click to collapse
I think it's kernel related problem. Try to flash CM7 or Kyrillos 10 or use PuruKisadHybrid
It is possible that was only temporary problem as looks , freezing has never repeat again . But after your advices i tried flash cm7 i now use cm7 kyrillos 10.6. Just testing , only well known gaming issues yet. But now i know flashing is so easy :victory:
Hey guys,
First off I am the newbiest of the noobs. And I think I stumbled into bricking my asus tf101. I was wondering if you incredibly amazing developers would have a work around for me
I had rooted the TF101 a while back it worked everything was fine, I was frustrated with the poor video performance and thought maybe upgraded to jellybean may improve some speed issues with the tablet. So I ran off did some fast googling and found a forum that posted the nightlies. (Team EOS from this site)
I downloaded the first one (right to the tablet) booted into the root bootloader thing (yea im so noob I don't even know the proper wordage) and installed from that.
Now when it boots it sits at a 4 colored square logo that rotates a pules. each little piece glows (like it's loading) but it just sits there forever. i have waiting 10-15-30-45 minutes nothing.
I was wondering if there was a way I could download a new jellybean file on a SD card, and somehow install over with that?
Could really use the help and need it explained to me like im 2 ..
Really sorry to have to ask guys. Save me!
It's a very well discussed issue here and in the teameos thread.
Did you do a full cache, dalvik, system and factory reset of the device through recovery?
Which recovery are you using? (you probably need a newer one)
If you can still boot in recovery (you should) then wipe cache, dalvik, system, do a factory reset (does not wipe sdcard but you will lose all other data) and finally reflash the rom.
If you can't boot in recovery for whatever reason, you can use easyflasher to go back to stock then start over. Frederuco made an awesome post detailing the entire procedure on transformerforums.
Hi all
I’m a complete noob at this and it seems like I have got myself into a bit of a pickle. Sorry for the massive description but I thought it would make it easier to get a good answer.
My Phone:
Samsung Galaxy S4 GT 19505 LTE
PDA I9505XXUEMK8
CSC I9505BTUEMK5
MODEM I9505XXUEMK8
I successfully rooted my phone using Odin. In Odin I added the "CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5" file to the PDA field then rebooted the device. Then I added the "openrecovery-twrp-2.6.3.1-jfltexx" file to the PDA field, rebooted the device and the phone automatically opened in TWRP recovery. In recovery mode I wiped the cache, system and dalvik cache. I then went to install, browsed to the "I9505 Official_Google_Edition_4.3_by_Jamal2367_Finaly_v2.0" file on my SD card, rebooted the device and the Google logo came up on the screen for a few minutes and all was good. Got my new ROM, ran a root checker and all was good.
After some research I decided I wanted to use the Pacman ROM as it seemed to a lot more customisable. Using the same method I went to TWRP recovery wiped the cache, system, and dalvik cache. I then went to Install, browsed for the pacman ROM and the Gapps file on my SD card and everything installed ok, the phone restarted and the pacman logo came up everything was fine. Although I did notice on start up that I got this message.(and have had this error message ever since)
kernel is not seandriod enforcing
set warranty bit : kernel
After using the Pacman ROM for a day I noticed a lot of bugs like my apps would disappear, I couldn't use my banking apps and my phone was generally performing very badly. So I decided to remove the ROM and use CyanogenMod ROM under the recommendation of a friend. So again I pressed home+power+vol up to enter recovery mode but this time it didn’t enter the TWRP recovery it entered the stock recovery mode. This was slightly concerning but I proceeded to use the list menu and cleared the cache etc, browsed the SD card and went to the CyanogenMod 10.2 ROM I previously downloaded. It began to install but in red I got the error message stating that I didn’t have the right permission or signature. The phone rebooted back to the Pacman ROM. I tried the above three times and it still continued to boot back into Pacman ROM sometimes I struggled to even get back into recovery mode.
Soooooo I decided to try and go back to the Google Edition 4.3 ROM and play it safe, using the method from my first paragraph. But when it installed through TWRP I got an error message saying cant find MD5 file. The device rebooted and the Google edition logo came up on the screen but it seems to be locked in a loop. The Google logo wont go away and the phone vibrates once then three times quickly every 10 seconds.
I can still enter both TWRP recover and Download Mode. But I don’t want to mess around with it anymore without getting some advice. Any help would be much appreciated as I really need my phone working.
Thanks again
Aiden
Did you create a backup while on your first run with google edition? If so wipe cache, system, and dalvik and restore to your backup. Should put you back to where you began.
Sent from my LGMS769 using XDA Premium 4 mobile app
I know I should, but I didnt. Is it still fixable ?
*Update*
Couldnt help myself had to have a tinker around. Managed to get Cyanogenmod 10 working with Gapps. Gonna see how I get on with this. Although still would like to know I have been having all these problems.
Sometimes things just dont go as planned: p I have easily soft bricked my phone around 10 times and always able to fix it. You really should have made a stock backup before flashing anything. I recommend doing it now so you at least have a known working configuation backed up for future use. Trust me backups are your friends!
Sent from my LGMS769 using XDA Premium 4 mobile app
Thanks for your replies.
Ye gonna that right now Cyan Mod so far is running very smooth without any problems.
Regards
Aiden
Hey guys,
I have encountered a serious problem on my device. Today I rebooted my phone once and it has just stuck on the samsung logo. Then the phone began to reboot without ending....It could not just start. With the help of TWRP I have made a full wipe and tried to reinstall my actual firmware Superman 1.10.5, but I always stuck at 25%, the phone did not respond to any actions. I even tried to flash the stock 4-file firmware with Odin, but it did not help, the phone constantly reboots. Sometimes it manages to boot to the stage where the sign "installation of applications" appears, but a while later it stucks again and reboots. Please, help me to solve the issue, because I am begininng to think that it would be unpossible to recover the phone. I am only able to enter the download mode or recovery, anything else does not work.
Thanks....
AuroraLX said:
Hey guys,
I have encountered a serious problem on my device. Today I rebooted my phone once and it has just stuck on the samsung logo. Then the phone began to reboot without ending....It could not just start. With the help of TWRP I have made a full wipe and tried to reinstall my actual firmware Superman 1.10.5, but I always stuck at 25%, the phone did not respond to any actions. I even tried to flash the stock 4-file firmware with Odin, but it did not help, the phone constantly reboots. Sometimes it manages to boot to the stage where the sign "installation of applications" appears, but a while later it stucks again and reboots. Please, help me to solve the issue, because I am begininng to think that it would be unpossible to recover the phone. I am only able to enter the download mode or recovery, anything else does not work.
Thanks....
Click to expand...
Click to collapse
Really sad to hear that story mate. First things first, I assume your BL version is matching with the firmware your flashing right. And when you go to TWRP, can you see /system and /data partition from the mount menu? If not, you have to perform a factory reset. I had issue like that with my Galaxy S7 and usually factory reset(not wiping) helped me with that situation. Since your system can boot up, but crashes after awhile, I do suspect that some of your partition might be corrupted(at least its what happened to me). So trying factory reset can be a good bet for you.
And... I think you have to provide more information with which variant you are using, and your BL version, TWRP version too, solve the problem quicker. Hope this information helps.
CenteaOSD said:
Really sad to hear that story mate. First things first, I assume your BL version is matching with the firmware your flashing right. And when you go to TWRP, can you see /system and /data partition from the mount menu? If not, you have to perform a factory reset. I had issue like that with my Galaxy S7 and usually factory reset(not wiping) helped me with that situation. Since your system can boot up, but crashes after awhile, I do suspect that some of your partition might be corrupted(at least its what happened to me). So trying factory reset can be a good bet for you.
And... I think you have to provide more information with which variant you are using, and your BL version, TWRP version too, solve the problem quicker. Hope this information helps.
Click to expand...
Click to collapse
Yep, you are right, BL versions always matched firmwares. I tried to wipe the phone with TWRP 3.0.2.3 and also to make a factory reset with the stock recovery. The stock firmware, which I tried to flash, was G930FXXU1BPH6_G930FOXE1BPH1_SER consisting of 4 files including BL,AP,CP and CSC. After 3rd or 4th flash of the same stock firmware the phone suddenly became alive and began to boot. Wu-huuu:silly: I was happy as a child. After having successfully launched the stock rom I have again flashed TWRP 3.0.2.3, went to "wipe" option and formatted data. Then I have installed a Superman Rom 1.12 and everything went the right way. I don't understand only one thing: why after having wiped the phone several times and having reseted it through the stock as well as TWRP recovery it didn't want to boot.
As you said, I suppose that the one of partitions was corrupted. Oh damn, I thought that I won't be able to resuscitate this phone.
I have flashed about 20 phones during my life, but I have never ever encountered such serious problems.
Hi there!
After about a week ago, I’ve turned off my Note 3. Then two days later, when I wanted to use it, I’ve turned it on. After CM logo appears, its says:
“Android is starting
Optimizing x apps of x”
I know this is because of ART, but after it finishes, my phone reboots, and CM logo appears again, and nothing happens. After a while, it starts optimizing apps again. Now I left it for 2 hours, my phone didnt boot up.
What should I do? I didnt flash any new kernel, rom, recovery or anything else. Im on CyanogenMod, with CWM recovery. I dont want to factory reset, because of my photos and videos.
Even I tried to start in safe mode, but I couldnt get to it, and Im not really sure that I tried to enter safe mode properly.
Please help!
Just dirty flash the rom again through cwm.
See if it works
It's high time you flashed TWRP already.
Bence98007 said:
Hi there!
After about a week ago, I’ve turned off my Note 3. Then two days later, when I wanted to use it, I’ve turned it on. After CM logo appears, its says:
“Android is starting
Optimizing x apps of x”
I know this is because of ART, but after it finishes, my phone reboots, and CM logo appears again, and nothing happens. After a while, it starts optimizing apps again. Now I left it for 2 hours, my phone didnt boot up.
What should I do? I didnt flash any new kernel, rom, recovery or anything else. Im on CyanogenMod, with CWM recovery. I dont want to factory reset, because of my photos and videos.
Even I tried to start in safe mode, but I couldnt get to it, and Im not really sure that I tried to enter safe mode properly.
Please help!
Click to expand...
Click to collapse
Ahh I would suggest you to get TWRP, The world has moved on and I think you should too! It's just a little better at things overall. TWRP can be flashed through ODIN. As for the Bootloop, try dirty flashing the ROM. Just wipe the dalvik/ART and cache and leave the rest as it is.
Dinara° said:
Ahh I would suggest you to get TWRP, The world has moved on and I think you should too! It's just a little better at things overall. TWRP can be flashed through ODIN. As for the Bootloop, try dirty flashing the ROM. Just wipe the dalvik/ART and cache and leave the rest as it is.
Click to expand...
Click to collapse
What do you mean on “dirty flashing”? Do I lose my data if I flash my rom again?
Bence98007 said:
What do you mean on “dirty flashing”? Do I lose my data if I flash my rom again?
Click to expand...
Click to collapse
No you don't, dirty flashing = installing the same ROM without wiping or resetting any data sets, just reflashing that zip again, JIC some files got corrupted, if that doesn't help you might have to give it a fresh start.