Hey, I need help, I recently bought the Samsung Galaxy S Duos 2 (GT S7582) and I decided to put a CM12 on the phone, I did all the steps and I finally managed to have my custom rom, it's nice and smooth, but the only thing is that is not recognizing the SIM card, in fact is always showing a "emergency calls only" message. When i change the settings of the sim from CDMA/GSM Only to GSM Only, the network icon shows my signal and the name of my carrier, but for less than 8 seconds. And that's it.
I try to install the CM13 and is nice but the problem is persistent, so I installed like 2 more custom roms, resurrection and milktea but it's the same problem, can you help me? What can I do? I need to use the phone.
adlitte said:
Hey, I need help, I recently bought the Samsung Galaxy S Duos 2 (GT S7582) and I decided to put a CM12 on the phone, I did all the steps and I finally managed to have my custom rom, it's nice and smooth, but the only thing is that is not recognizing the SIM card, in fact is always showing a "emergency calls only" message. When i change the settings of the sim from CDMA/GSM Only to GSM Only, the network icon shows my signal and the name of my carrier, but for less than 8 seconds. And that's it.
I try to install the CM13 and is nice but the problem is persistent, so I installed like 2 more custom roms, resurrection and milktea but it's the same problem, can you help me? What can I do? I need to use the phone.
Click to expand...
Click to collapse
go and take your phone to hardware recovery shop
may be you broke sim card slot
.
.
.
hit thanks if i help you:good:
charlesxd2016 said:
go and take your phone to hardware recovery shop
may be you broke sim card slot
.
.
.
hit thanks if i help you:good:
Click to expand...
Click to collapse
Well, the sim is new, I got it with the phone, and the SIM slots are ok, they were good before I installed the custom rom, because when i received the phone, the sim was working
adlitte said:
Well, the sim is new, I got it with the phone, and the SIM slots are ok, they were good before I installed the custom rom, because when i received the phone, the sim was working
Click to expand...
Click to collapse
try to flash stock rom
.
.
.
hit thanks if i help you:good:
Hey, i managed to put a stock rom, but it seems the phone is bricked now. Because is in booting animation again and again. what should i do now?
Ok, yes, I have stock rom now, the problem is persistent, how do i now the actual region of my phone, I'm from venezuela but the phone is S7582 without the L, I think I need to download another stock rom with different region because this one is full english. But the problem is persistent.
adlitte said:
Ok, yes, I have stock rom now, the problem is persistent, how do i now the actual region of my phone, I'm from venezuela but the phone is S7582 without the L, I think I need to download another stock rom with different region because this one is full english. But the problem is persistent.
Click to expand...
Click to collapse
do it my way
all you need to do download stock rom of your region from herehttp://www.sammobile.com/firmwares/database/GT-S7582/
than extract it you got md5 file
than download odin3.07 from herehttp://odindownload.com
1-backup all your data
2-switch off your phone,remove battery,simcard,memory card
3-open odin in pc
4-re-insert you battery
5-hold volume down ,home key, power button toughter this will turn your phone into downloading mode
6-press volume up key to continue
7-connect you phone to pc
8-wait for odin massege
9-click pda
10-select md5 file fom where you have downloaded the stock rom
11-click start wait for odin said pass and your device will automatically reboot
done
.
.
.
hit thanks if i help you...:good:
My country or region is not in there, how do I know which one is?
adlitte said:
My country or region is not in there, how do I know which one is?
Click to expand...
Click to collapse
what is your mother language
charlesxd2016 said:
what is your mother language
Click to expand...
Click to collapse
spanish
adlitte said:
spanish
Click to expand...
Click to collapse
sorry stock rom is not available for you region you have select another one
.
.
.
hit thanks if i help you:good:
Related
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Did you back up your efs folder?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
efs folder
Mervingio said:
Did you back up your efs folder?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
i bougth the skyrocket from ebay already with this issue so i dont have a efs folder backup. the phone is sim unlock
i also have another att skyrocket same version can a copy the efs file from it and back up on the defective skyrocket?
4italia4 said:
i bougth the skyrocket from ebay already with this issue so i dont have a efs folder backup. the phone is sim unlock
i also have another att skyrocket same version can a copy the efs file from it and back up on the defective skyrocket?
Click to expand...
Click to collapse
I think that would clone the imei and mac addresses aka bad news.
damn
lart2150 said:
I think that would clone the imei and mac addresses aka bad news.
Click to expand...
Click to collapse
well the defective skyrocket showns the imei and mac and its correct with the back label, i already backed up tha efs folder. i also try tu run the GSII_repair ant it says on step 3 nv_data.bak and his nv_data.bak.m5d is miss so i think that the problem is something with that. As i have the back up of my partial efs folder i think i can start playing around and see what i got cuz in my partial efs folder i have my imei backed up
what do you think?
4italia4 said:
well the defective skyrocket showns the imei and mac and its correct with the back label, i already backed up tha efs folder. i also try tu run the GSII_repair ant it says on step 3 nv_data.bak and his nv_data.bak.m5d is miss so i think that the problem is something with that. As i have the back up of my partial efs folder i think i can start playing around and see what i got cuz in my partial efs folder i have my imei backed up
what do you think?
Click to expand...
Click to collapse
IMO you need back ALL to stock and UNROOT then start from zero and see.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Mervingio said:
IMO you need back ALL to stock and UNROOT then start from zero and see.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
i thought he tried going back to stock
note: going back to stock will unroot , its just like getting it new from carrier, then see if your having sim card issues, btw which carrier are u trying to use, att?
mas movil
vincom said:
i thought he tried going back to stock
note: going back to stock will unroot , its just like getting it new from carrier, then see if your having sim card issues, btw which carrier are u trying to use, att?
Click to expand...
Click to collapse
the phone is ulock and in the efs folder have the imei folder and it showns the correct imei i already back up that folder. im trying to use a panamamenian gsm carrier. i got data internet can make calls can do everything but after y make the steps above after turn on the phone everytime
so this weekend i ll try some new stuff go to stock unroot rom try to merge the efs folder of the good one skyrocket without pasting the imei folder and lets si what i got
4italia4 said:
the phone is ulock and in the efs folder have the imei folder and it showns the correct imei i already back up that folder. im trying to use a panamamenian gsm carrier. i got data internet can make calls can do everything but after y make the steps above after turn on the phone everytime
so this weekend i ll try some new stuff go to stock unroot rom try to merge the efs folder of the good one skyrocket without pasting the imei folder and lets si what i got
Click to expand...
Click to collapse
leave the efs folder alone, just try the stock firmware as is to test
I too am having a problem with an AT&T Skyrocket that is rooted. I have been using it without a problem with Straighttalk's AT&T SIM. I decided to switch it to T-Mobile's $30 plan and unlocked the phone. It worked except service was extremely poor so I flashed the SKY ICE 4.2E R5goo.zip and SKY ICE 4.2-17.zip ROM (T-mobile radio). This didn't work any better so I read that I should try a couple different radios. I attempted to flash the Blaze radio since that seems to be the most popular and after rebooting I get the no SIM error. I have reflashed the stock ROM using ODIN (several times) and now neither the T-mobile or ST SIM is recognized.
I found this thread and attempted to go through the procedure but there is no modem assert reset on my menus.
Any help would be a appreciated.
truebeliever71 said:
I too am having a problem with an AT&T Skyrocket that is rooted. I have been using it without a problem with Straighttalk's AT&T SIM. I decided to switch it to T-Mobile's $30 plan and unlocked the phone. It worked except service was extremely poor so I flashed the SKY ICE 4.2E R5goo.zip and SKY ICE 4.2-17.zip ROM (T-mobile radio). This didn't work any better so I read that I should try a couple different radios. I attempted to flash the Blaze radio since that seems to be the most popular and after rebooting I get the no SIM error. I have reflashed the stock ROM using ODIN (several times) and now neither the T-mobile or ST SIM is recognized.
I found this thread and attempted to go through the procedure but there is no modem assert reset on my menus.
Any help would be a appreciated.
Click to expand...
Click to collapse
Did you notice in odin if it flashed files named mdm.bin and amss.bin? That's the radio.
In case you didn't (and didn't read the 1 stop thread), here are som links for radios:
A thread with only t-mobile radios (work on our phone too) and here are all the i727 radios.
Hopefully this will help, but really i'm just guessing, maybe someone else can spread some light on your problem.
I'm guessing (hoping) that for some reason the blaze radio failed to flash and so you got a corrupt radio. Then you flashed stock tar that didn't have modem in it.
lingowistico said:
Did you notice in odin if it flashed files named mdm.bin and amss.bin? That's the radio.
In case you didn't (and didn't read the 1 stop thread), here are som links for radios:
A thread with only t-mobile radios (work on our phone too) and here are all the i727 radios.
Hopefully this will help, but really i'm just guessing, maybe someone else can spread some light on your problem.
I'm guessing (hoping) that for some reason the blaze radio failed to flash and so you got a corrupt radio. Then you flashed stock tar that didn't have modem in it.
Click to expand...
Click to collapse
Yes it did flash the mdm and amss bins. I'm suspecting something happened to the SIM holder since it will not read any of the SIMs (Tmobile, ATT or ST) I tried in it and have another on it's way. I'll see if that changes the outcome.
4italia4 said:
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Click to expand...
Click to collapse
Have you found a permanent solution for this problem? I been having the same issue with a SGH-M919 Tmobile version working on Movistar Colombia.
Thank you.
Very familiar issues buying from ebay garbage
4italia4 said:
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Click to expand...
Click to collapse
Hi, im having the same problem but when i put the numbers *#197328640# it doesn't shoe me anything, empty list, no options!
please i really need any help in this :/
thanks
Not working with your method
4italia4 said:
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Click to expand...
Click to collapse
I didn't find option in Simulation (I have inserted the Working Sim Card). Well I live in Mumbai,India. I can't come to US just to fix this phone. So please tell me what to do now? plz Plz tell me. am eagerly waiting for your reply.
I am finding permanent solution for this problem.
So you will need to solutions for this problem.
Please contact us on 9420076969.
Your phone is still properly working.
No service after kitkat pls help my its emergency
ispukan said:
No service after kitkat pls help my its emergency
Click to expand...
Click to collapse
Same problem here. I got my update through PC Companion just now and now phone won't connect to my home network. It is Generic and unlocked to all networks. I have issued this SIM card just for this phone from my service provider because old one was miniSIM. And it worked well before update. I tried reinserting card, it does recognize SIM, it does find my network, it just refuses to connect to it.
Any thoughts?
Then downgrade back to 4.3 using the 4.3 ftf file accordingly via flashtool
Fix
Just flash baseband from 4.3 and everything is back to normal i fix it that way.
Ok, thanks for possible solution. However, I replaced my SIM card with card from another carrier. It is prepaid card so it is inexpensive to buy a new one. Cards from two different carriers are visually identical, but old one does not work, while new one does. I like new number (starting with 666 ) so I will stick with the new card.
expain me how to do it bro
allexadb96 said:
expain me how to do it bro
Click to expand...
Click to collapse
Download 4.3 ftf for xperia m2 (check your proper version in settings) and download flashtool ( google it ) and when you open the app you choose flash mode and choose the 4.3 ftf but uncheck everything on the side excepted baseband and voala when you boot it works. To enter in flash mode you restart your phone and hold the volume down key and connect usb in same time. you have tutorials on youtube you can check. hit thanks if i helped
Hi Guys
First of all, i´m sorry my english is not very good and i have to use a Translator.
I recently bought a used SM-G930F. The previous owner had flashed before so although everywhere says SM-G930F in settings in "model information" says "SM-G930FD". Also when a SIM is inserted the "DualSIM Administrator" appears. Had Mashmallow installed and worked perfectly.
I wanted to try flashing the new NOUGAT BTU firmware stock. I did it through ODIN. The process had no errors. When the phone restarted I see that it has no signal. It recognizes that you have a SIM card inserted but "emergency calls only" appears.
The IMEI was not deleted.
Immediately I downloaded a stock firmware from my country ARGENTINA to go back to MARSHMALLOW and I installed it but the same thing is still happening. Then I tried to download another stock firmware from my country and my operator CLARO ARGENTINA, but the same thing is still happening.
I read in forums that the problem may be the modem, but I understand that is modified in the box "CP" of ODIN when flashing.
I honestly do not know what else to do. I also do not remember what firmware I had before doing the whole process.
I understand I should have backed up everything but I did not.
So I ask you please if you can help me.
Thank you very much
dhg2015 said:
Hi Guys
First of all, i´m sorry my english is not very good and i have to use a Translator.
I recently bought a used SM-G930F. The previous owner had flashed before so although everywhere says SM-G930F in settings in "model information" says "SM-G930FD". Also when a SIM is inserted the "DualSIM Administrator" appears. Had Mashmallow installed and worked perfectly.
I wanted to try flashing the new NOUGAT BTU firmware stock. I did it through ODIN. The process had no errors. When the phone restarted I see that it has no signal. It recognizes that you have a SIM card inserted but "emergency calls only" appears.
The IMEI was not deleted.
Immediately I downloaded a stock firmware from my country ARGENTINA to go back to MARSHMALLOW and I installed it but the same thing is still happening. Then I tried to download another stock firmware from my country and my operator CLARO ARGENTINA, but the same thing is still happening.
I read in forums that the problem may be the modem, but I understand that is modified in the box "CP" of ODIN when flashing.
I honestly do not know what else to do. I also do not remember what firmware I had before doing the whole process.
I understand I should have backed up everything but I did not.
So I ask you please if you can help me.
Thank you very much
Click to expand...
Click to collapse
try flashing the specific modem and bootloader of your phone. you might want to try mashmallow modem.
You say I try flash only the modem and bootloader that come included in stock firmware from other countries? Must I only check the boxes "BL" and "CP" from ODIN? Thats correct?
dhg2015 said:
You say I try flash only the modem and bootloader that come included in stock firmware from other countries? Must I only check the boxes "BL" and "CP" from ODIN? Thats correct?
Click to expand...
Click to collapse
I also tested Firmware flash from several countries in America and others, for example Chile, Colombia, Brazil, Mexico, Germany, Portugal. I also tested with some G930FD firmware from Vietman, Singapore, but there was no case. The only thing that stands out is that with Vietnam although no signal, "allowed" the band 4G, did not allow it in all previous cases, do not know if something to see.
u have any issues with wi-fi?? it looks like a modem problwm to me..
Try flashing the stock rom back with the samsung kies program so it will flash back the original stock rom that came with the phone and see if you then have your connection back. If that works then try to flash the BTU.
RiTCHiE007 said:
Try flashing the stock rom back with the samsung kies program so it will flash back the original stock rom that came with the phone and see if you then have your connection back. If that works then try to flash the BTU.
Click to expand...
Click to collapse
Thanks very much for your answer, I tried it as you indicate, but unfortunately it does not work, it still has no signal
lekou said:
u have any issues with wi-fi?? it looks like a modem problwm to me..
Click to expand...
Click to collapse
Hi!
No, the Wi-Fi works fine
Phone is likely IMEI blocked (reported stolen)
Is it possible? I'll find out and tell you. Thank you
dhg2015 said:
Is it possible? I'll find out and tell you. Thank you
Click to expand...
Click to collapse
You're right, I took the phone to a technician and repaired it. Thank you very much for your help.
a.
Or maybe simlock
dhg2015 said:
You're right, I took the phone to a technician and repaired it. Thank you very much for your help.
a.
Click to expand...
Click to collapse
:good:
Hi guys. Hope anyone of you can help me.
So I've bought the dual sim version from Dubai. Flashed Custom rom, flashed nordic CSC file. Everything was working fine for months.
No while I'm in Turkey. I inserted a second sim (turkish one). Phone asked for restart cuase it's detecting new sim.
Restarted phone and now I get red font error at Samsung logo. "Custom binary blocked by frp lock"
I can't boot in to recovery mode either. This is very strange. What could be messed up? Huh
Any help please. I would love to save my data before wiping everything!!
Let me know! Appreciate it!
sparex said:
Hi guys. Hope anyone of you can help me.
So I've bought the dual sim version from Dubai. Flashed Custom rom, flashed nordic CSC file. Everything was working fine for months.
No while I'm in Turkey. I inserted a second sim (turkish one). Phone asked for restart cuase it's detecting new sim.
Restarted phone and now I get red font error at Samsung logo. "Custom binary blocked by frp lock"
I can't boot in to recovery mode either. This is very strange. What could be messed up? Huh
Any help please. I would love to save my data before wiping everything!!
Let me know! Appreciate it!
Click to expand...
Click to collapse
Google "s8 frp lock"
dynospectrum said:
Google "s8 frp lock"
Click to expand...
Click to collapse
Not working. Cause I'm stuck at the Samsung logo. Can't log in with my google credentials!!
BTW it says FAP lock not FRP.
Also how could this happen? Why did it get locked?
Any help please. I'm stuck in Turkey without my phone!!
You have to go to updato.com and download your firmware. Then Odin flash it, then go to developer settings and check off OEM unlock.
Sent from my S8+Rooted
Brava27 said:
You have to go to updato.com and download your firmware. Then Odin flash it, then go to developer settings and check off OEM unlock.
Sent from my S8+Rooted
Click to expand...
Click to collapse
I've downloaded stock Firmware and tried to flash through ODIN... I get an error message that PIT file can't be read.
I cant boot into recovery mode either. I'm basically screwed and have been without my phone for two days.
Is there ANY kind human who can take me through this and help out PLEASE.
I don't have access to a windows laptop, only MAC.
just download very latest friwmare and flash than it will be power on normaly
sparex said:
Hi guys. Hope anyone of you can help me.
So I've bought the dual sim version from Dubai. Flashed Custom rom, flashed nordic CSC file. Everything was working fine for months.
No while I'm in Turkey. I inserted a second sim (turkish one). Phone asked for restart cuase it's detecting new sim.
Restarted phone and now I get red font error at Samsung logo. "Custom binary blocked by frp lock"
I can't boot in to recovery mode either. This is very strange. What could be messed up? Huh
Any help please. I would love to save my data before wiping everything!!
Let me know! Appreciate it!
Click to expand...
Click to collapse
Recovery Mode?stucked up... You can re-flash the ROM.This time Dont go for Custom Rom
Use Offical Rom Provided By Samsung...Cheers
Different Custom roms aren't built accordingly as the offical work fines and smooth:good:
Guarantee you flashing stock rom will not work.
I've been stuck in recovery and download mode and downloaded all the official samsung firmware for my phone, 100% exact and 100% correct firmware.
Been trying for days and days and days.....all flashes ok, but simply reboots to android recovery saying same old SHI*
Which is:
something along the lines of DRK not installed and to install ENG boot or binary.
I've downloaded from coreect site, efinitely the correct firmwarefor my phone model and carrier etc etc....nothing works.
tried different versions of odin etc.
Nope, nothing.
I've got a BRICK!
Took my phone into Samsung store today, they looked at it and basically said, warranty void - only way to fix it is to fit a brand new board!
getting it back Tuesday, but costing me £250 ! ! ! !
Matt.
first of all sorry for my bad English.
so I bought this samsung galaxy s7 : "SM-G930FZAAFG"
box said it was made in Vietnam but when I check my IMEI in the net it said this :
G930F Galaxy S7 (SM-G930K)
SIM card size: Nano Sim
and when tried to find the right firmware I found this :
KTC - South Korea - KT South Korea - G930KKKU2ERJ1_G930KKTC2ERJ1_KTC
I installed it and all but only one sim is detected as if the other one dose not exist at all .
but when I bough the phone both sim's were working and the phone has two slots
I am trying to find the right firmware for this phone
plz help me I tried everything
btw can I share my IMEI number ?
What is the model # shown in download mode?
IMEI in the phone matches the IMEI on the box?
audit13 said:
What is the model # shown in download mode?
IMEI in the phone matches the IMEI on the box?
Click to expand...
Click to collapse
this is the model in the download mode : sm-g930k
but I did't find sm-g930k for duos
and yes the IMEI matches the one in the box
zitno said:
this is the model in the download mode : sm-g930k
but I did't find sm-g930k for duos
and yes the IMEI matches the one in the box
Click to expand...
Click to collapse
The model # shown in download mode is the model # for the motherboard in the phone.
Looks like the sm-930k does not support dual sim: https://www.phonemore.com/samsung-galaxy-s7-sm-g930k/specs/3319
Why did you flash different firmware?
audit13 said:
The model # shown in download mode is the model # for the motherboard in the phone.
Looks like the sm-930k does not support dual sim: https://www.phonemore.com/samsung-galaxy-s7-sm-g930k/specs/3319
Why did you flash different firmware?
Click to expand...
Click to collapse
the sound of the speaker was bad so I thought it I flash it, it may get better :/ and the phone was having a problems when I call someone the audio was bad
zitno said:
the sound of the speaker was bad so I thought it I flash it, it may get better :/ and the phone was having a problems when I call someone the audio was bad
Click to expand...
Click to collapse
How is the sound now?
audit13 said:
How is the sound now?
Click to expand...
Click to collapse
still the same
Both sim slots could be used at the same time?
Sounds like the phone may have been put together using different parts.
The 930F and 930k are not the same phone.
audit13 said:
Both sim slots could be used at the same time?
Sounds like the phone may have been put together using different parts.
The 930F and 930k are not the same phone.
Click to expand...
Click to collapse
yea I think so too :/
we I am gonna return it but if I can find firmware that makes both sim slots work so I can return it working as it was
any idea how I can do that ?
zitno said:
yea I think so too :/
we I am gonna return it but if I can find firmware that makes both sim slots work so I can return it working as it was
any idea how I can do that ?
Click to expand...
Click to collapse
Unfortunately, Odin will not let you cross-flash bootloaders or ROMs. Cross-flashing may even brick the phone.
I recommend returning the phone as soon as possible.
audit13 said:
Unfortunately, Odin will not let you cross-flash bootloaders or ROMs. Cross-flashing may even brick the phone.
I recommend returning the phone as soon as possible.
Click to expand...
Click to collapse
thanks mate your reply's where very helpful
I will do that .. it's my only option
I searched and it seems to me that they were installing a custom rom !
becouse I did install a custom rom and it worked fine before flashing the phone with the SM-G930K
so I will install this one :
https://forum.xda-developers.com/galaxy-s7/development/rom-superstoc-rom-v1-0-aroma-t3496520
Good luck. Please report back with your results.
Thanks.
- Update -
I just installed TWRP for SM-G930F :
twrp-3.2.3-0-herolte
and then I add the the custom rom :
SuperMan-Rom SM-G930F V3.0.1_O_Final
and now everything is working fine even the sound and duel sim is working too
if we recap on this phone on the back of the phone it said SM-G930FD
and in Samsung download mode is said : SM-G930K
and on the operation system I am using a custom rom that said SM-G930K
by the way I am stuck with the TWRP can I flash back only the stock bootloader ?
zitno said:
by the way I am stuck with the TWRP can I flash back only the stock bootloader ?
Click to expand...
Click to collapse
You can but changing only the bootloader may cause problems with the installed ROM.
You should only install bootloaders that are meant for the phone model number that is shown on the download screen. Never try to downgrade the bootloader to an earlier version because this may cause additional problems that include bricking the phone.