Hi guys, New to the forum here and in desperate need of some help here!
I have a sony xperia Z3 and ive just replaced the screen and the frame after smashing my screen only to find that when I try to power up the phone, I get nothing.
It will charge and I know it isn't the screen or anything like that because it says its charging on the LCD. My thought are that the power button isn't working, Anyone else had the same trouble?!
All help appreciated!
Related
When i brought my xperia j,it was running flawlessly in the first week.Then problem started to arise.Whenever i lock my phone and try to unlock it,the touch screen becomes unresponsive.i need to press it hardly to get back to the normal condition.this happens especially when i keep my cell in my pocket.
Any kind of help will be appreciated.
Thanks.
Hello.
I was looking for some help with my Xperia J, i recently dropped and smashed this phone and it no longer it accessible.
I need to get the internal data from this phone as i have audio and video files which are very important to me, i have been able to gain a second hand Xperia J that has a cracked screen, i transferred over the internal board from my broken xperia to this second hand phone i now have but it does not seem to be able to start up when i try power it on? . Ive connected the phone to my PC but the computer fails to recognize the phone. can any one plese help me on this issue or maybe inform me of a way to recover these files.
Thank You
I guess that the smash caused some electronic component to fail..
And are you sure you replaced the screen on the board correctly.
And did you see something missing on the board?
Does the led lights up when you connect the charger? Does the phone vibrate if you press the power button,,,?!
More info buddy.maybe someone could help..
hit thanks if I helped you,
don't say it.....
sent from my Xperia E dual C1604....
stock deodexed cleaned Rom.....
Use Wondershare mobile to go bro
Sorry
Ok my bad for the lack of information.
I replaced the screen correctly because i later removed it and put original parts back in new phone to check and make sure it was still working.
Then i put the board i need to work in and nothing happens. ?
When i plug the phone into the wall socket and check with electric tester it is live.
When i use the PC i get no response.
Ive tried doing the power up and volume up - power down volume down - power on it's own and nothing happens.
I do not receive led lights when the buttons are pressed nor do i receive a vibrate.
The only thing that looks damaged on the board is the Gold battery receivers, they have bent and are a little squashed.
If i have left any information out that could help please ask
I also would like to say that i have 2 phones 1 completely dead and 1 with a cracked screen.
I transfered the completely dead phones internal board to the cracked screen phone >
That might be it...
The golden legs carries the power from battery to the board.. So if you could use some copper wire or something to make proper contact with battery,it might work,,, tell me if it does
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..
With less than 24 hours of use, the touchscreen on my brand new Xperia Z3 Dual (D6633) stopped working. The phone was activated on the T-mobile network (but was not bought at T-mobile because they do not sell the Dual SIM version). The phone has NOT been immersed in water or abused in any way. I was able to power down by holding the Power button and Volume Up buttons. Sony Support said to try and repair the software with PC Companion. That did not work. Sony said I could send it in "for evaluation", but that might take 14 days just to find out what is wrong.
At this point, when I power up I am in the language selection screen and can not continue because I can not select "Done" on the touch screen.
It was suggested that if I boot up holding the Power and Volume Down keys, I would enter "Recovery Mode" and the Volume control could then be used to move up and down on the screen to make selections. However, I enter "Safe Mode" and the Volume control seems to just control the volume (at least there is a volume control slide graphic that seems to indicate the level of volume).
Any thoughts as to how to fix this or is this simply a bad unit that should be replaced with a new working unit?
Thanks in advance for any help you can give me.
Better use warranty to get a new one.
What failed -- digitizer or electronics controlling digitizer?
iFlasher said:
Better use warranty to get a new one.
Click to expand...
Click to collapse
I think I might have to go through the lengthy process of a warranty return though I was hoping there would be a quicker fix.
Does anybody know what could have caused this? How do I know if it is the digitizer or if it is the electronics that controls the digitizer?
Z3 touchscreen
i have exactly the same issue, would love to hear from you as to if you managed to resolve it?
Still waiting with bad touchscreen.
faodave said:
i have exactly the same issue, would love to hear from you as to if you managed to resolve it?
Click to expand...
Click to collapse
I'm still waiting for a response from the seller, an online store.
I'll post back when I get some results.
similar but not exactly the same
I have similar trouble with Xperia Z3 Dual Sim , TouchScreen frequently stop responding for about 2-3 second , after that it will be ok,it happens 4-5 times from yesterday that I bought my new Xperia Z3 Dual and it's really annoying.
It seems Sony sucks on Xperia Z3 TouchScreens.
Hi, guys im having a problem with my z3 sometimes it only vibrates but doesnt turn on, sometimes it doesnt go past sony logo turns off and sometimes it turns on.. My z3s screen used to flicker from time to time so I thought of buying a new screen but I just canceled my order as I thought if it shows the sony xperia text its not a screen thing, idk if its software related cos when *rarely* it boots I can use it normally. I have its back cover opened whenever I try to turn it on there is a noise on the motherboard (dunno if its normal) if any of you have any suggestions you are welcomed!
My d6603 has the same issue (flickering,all that u mentioned above),have you managed to fix it pls tell me how....( Cant use flashtool for rom flashing)
Unfortunately no, I concluded its a motherboard issue so im looking for a new one...
Hi,
I have problem with my sony xperia z5. I broken my lcd on xperia and I replaced with new one and now wont turn on, on press power button turn on, lcd stay black(with backlight) for 3s and 3vibes and turn off and thats it. I tried with another lcd and it is the same. I tried without lcd, phone is turning on and works on mhl cable on lcd.
Please help.
I guess you did something wrong as u were reassembling the lcd display. Double check if something is not being pressed or some other problems while reassembling the phone parts.
But its just a guess tho.