I have a cricket lg stylo 5.1. Trying to root it but king root is not working. When I try it usually says connection to go timed out. So I've been try a different method but whenever I try to go into download more I get stuck in firmware update 0% for hours. Any suggestions.
Carnardoj said:
I have a cricket lg stylo 5.1. Trying to root it but king root is not working. When I try it usually says connection to go timed out. So I've been try a different method but whenever I try to go into download more I get stuck in firmware update 0% for hours. Any suggestions.
Click to expand...
Click to collapse
I use to work for Sprint as a technician for 7 years. In my experience it is sometimes necessary to do a button reset 3 times. An app or something maybe conflicting with the update. BE SURE TO BACK UP what you need first!
*EDIT* This is for OTA updates but also if trying to root its a good idea to wipe 3 times and then try the root.
Related
Got a notification this morning that there was a new update available for KitKat. I do not know what the update is as I postponed it. I am currently running KitKat 4.4.2 Kernel version 3.4.0. The build is D80020c. I am rooted. I have no other information except that it shows that an update is pending but it will not tell me what the update is and I do not know where to find out what it is.
Anyone have any ideas as to what this is? I am concerned because the last time an update rolled out, it soft bricked my rooted phone.
I spoke with tech support at AT&T and they claim that they do not know what it is and suggested that I call LG for an answer.....
NevetsDrassel said:
Got a notification this morning that there was a new update available for KitKat. I do not know what the update is as I postponed it. I am currently running KitKat 4.4.2 Kernel version 3.4.0. The build is D80020c. I am rooted. I have no other information except that it shows that an update is pending but it will not tell me what the update is and I do not know where to find out what it is.
Anyone have any ideas as to what this is? I am concerned because the last time an update rolled out, it soft bricked my rooted phone.
I spoke with tech support at AT&T and they claim that they do not know what it is and suggested that I call LG for an answer.....
Click to expand...
Click to collapse
Don't install it, it jacked up my phone. I was running the rooted mixed partition D80020c and I can't boot or get into download mode now. All I get it a constant reboot back to recovery. Cannot install another ROM, cannot restore a backup. My daughter was playing with my phone and pushed to continue with the install and now I'm trying to unscrew it.
Jank4AU said:
Don't install it, it jacked up my phone. I was running the rooted mixed partition D80020c and I can't boot or get into download mode now. All I get it a constant reboot back to recovery. Cannot install another ROM, cannot restore a backup. My daughter was playing with my phone and pushed to continue with the install and now I'm trying to unscrew it.
Click to expand...
Click to collapse
Is there any way to force a not install or deny it? The only option I have is to postpone the install and after 4 hours, it will run again and continue to run every 4 hours unless I find a way to break the cycle. How do I force a no install option?
That is what happened to me last time with the "q" update. I postponed the install (no option to not take it) and it installed itself after 4 hours when I left my phone on one night. I woke up to a bricked phone.....
NevetsDrassel said:
Is there any way to force a not install or deny it? The only option I have is to postpone the install and after 4 hours, it will run again and continue to run every 4 hours unless I find a way to break the cycle. How do I force a no install option?
That is what happened to me last time with the "q" update. I postponed the install (no option to not take it) and it installed itself after 4 hours when I left my phone on one night. I woke up to a bricked phone.....
Click to expand...
Click to collapse
I don't know how to permanently disable the update, but I'm sure there's a way. As info, I was able to easily fix my phone with the help of this thread posted by @thecubed: http://forum.xda-developers.com/showthread.php?t=2451696. I didn't read it all, but this might be what disables the update.
I'm not rooted. I took the latest update and all is fine. It's google+ fixes and Google wallet support. It actually let me set up tap & pay! I'll have to go somewhere to try it out.
Sent from my LG-D800 using Tapatalk
I got the notification too but figured that it would probably screw things up since I'm rooted and running TWRP so I did a little searching and came across this, http://forum.xda-developers.com/showpost.php?p=50454408&postcount=3 . It's been a few hours since I changed the setting and haven't seen the update notification again although AT&T pushed the update into CACHE/FOTA sometime this morning.
Well scratch that, the notification just came back. I'll try freezing it now.
Well if rooted just use TB to freeze software update. I am also running a mixed partition D80020c. I am on Straight Talk AT&T. Before rooting I tried taking the official OTA of KitKat but for some reason you can't enter an APN type so I couldn't get or send MMS. So I flashed back to the D firmware,rooted,added custom recovery,entered the APN type and then flashed the modified C firmware. You could also use Root Freezer instead of Titanium Backup to freeze
I was able to install the first of the two updates earlier for the 5.1.1 update on my Verizon Galaxy Note Pro 12.2. The second downloads, prompts for install, reboots and begins installing but errors out and reboots back into the OS home screen. The Verizon software update manager shows Failed software update error code 402. I have factory reset my tablet a couple of times and still same issue. I do not have my tablet rooted and no apps disabled.
I downloaded the latest available Samsung firmware md5 file, version VZW-P905VVRUANK1-20141205133604 and tried flashing using Odin 3.07 while in download mode. It starts and after a few seconds, Odin fails and on the tablet screen, I get the error, SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I have re-downloaded the firmware along with older versions and still same issue.
I was reading somewhere that my tablet could be "soft bricked" and that is why it will not install the second part of the OTA. As for the Odin/download mode error, I had read that the firmware version I am trying to flash in Odin has an older version of bootloader than my current and Samsung does not let you downgrade the bootloader. I may be wrong on both accounts, which is why I am seeing if anyone else has had this same issue or have any advice on what I can try.
Thanks in advance!
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
dansto82 said:
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
Click to expand...
Click to collapse
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
tdetroit said:
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
Click to expand...
Click to collapse
I was able to get mine to update using ODIN and the firmware file from sammoble. Factory reset on the tablet, factory reset in recovery and finally ODIN worked.
I was having the same problems as the OP listed. Once I decided to live without root and I would be okay with wiping the tablet, I performed exactly what dansto82 said he did and I'm now on 5.1.1.
Now hoping someone comes up with a way to root.
Hey, I have the p905v and it is running 4.4.4, I rooted it with towelroot and it was completely fine. I then tried putting twrp recovery on it the wrong way through flashify and now I don't have a recovery mode and can't update it to 5.1.1. Other than that the tablet runs perfectly fine. Is there a way I can fix it?
Sent from my SM-P905V using XDA Free mobile app
I tried to root and it failed now I am trying to get My s3 verison 535 back to original. Unfortunately I no longer have my verizon service for this phone. I have tried to reset it but part way thru the set up it says set up failed.
Then It returns back to the verizon red screen
Any Ideas
thanks John
648charlie said:
I tried to root and it failed now I am trying to get My s3 verison 535 back to original. Unfortunately I no longer have my verizon service for this phone. I have tried to reset it but part way thru the set up it says set up failed.
Then It returns back to the verizon red screen
Any Ideas
thanks John
Click to expand...
Click to collapse
Can you tell us what steps you used to try to root?
What was the status of your phone before you tried to root?
Were you on the most recent update from Verizon? (It was over a year ago.)
I have signed into kies and it says
dawgdoc said:
Can you tell us what steps you used to try to root?
What was the status of your phone before you tried to root?
Were you on the most recent update from Verizon? (It was over a year ago.)
Click to expand...
Click to collapse
s3 was working when I switched to a note 4. I took the verizon service off the phone and it sat in the garage for about a year set at 4.42 installed king root.
when I reset the phone it says king root in shell
pda ne1 phone ne1 csc ne1 vzw both current and latest firm ware I can get a screen with time and be able to go into settings
does the fact that I have no service affect the phone going to the verizon screen?
648charlie said:
s3 was working when I switched to a note 4. I took the verizon service off the phone and it sat in the garage for about a year set at 4.42 installed king root.
when I reset the phone it says king root in shell
pda ne1 phone ne1 csc ne1 vzw both current and latest firm ware I can get a screen with time and be able to go into settings
does the fact that I have no service affect the phone going to the verizon screen?
Click to expand...
Click to collapse
Not having service shouldn't affect it in that way.
I bought a used i535 back in May that was on the stock 4.4.2 rom from a couple that had done no mods to the phone. It had been unused for several months. After receiving it I wiped it and did a factory reset. Following that I rooted with TowelRoot, installed BusyBox, and then SafeStrap. At that point I installed SuperLiteROM and followed that with XPosed. I never put the phone into service but had no issues with installing apps, xposed modules, etc. That is there were no issues until I lent it to a coworker.
I am not familiar with King Root and if it can cause problems. Likewise, I am not familiar with KingoRoot.
I sounds like you are getting to a homescreen since you are seeing a clock widget and can open settings. It could be that your launcher has been compromised. If that is true, the simplest fix may be to reflash the stock NE1 rom. Doing so most likely will cause you to loose root.
@ShapesBlue do you have any other ideas on this?
dawgdoc said:
Not having service shouldn't affect it in that way.
I bought a used i535 back in May that was on the stock 4.4.2 rom from a couple that had done no mods to the phone. It had been unused for several months. After receiving it I wiped it and did a factory reset. Following that I rooted with TowelRoot, installed BusyBox, and then SafeStrap. At that point I installed SuperLiteROM and followed that with XPosed. I never put the phone into service but had no issues with installing apps, xposed modules, etc. That is there were no issues until I lent it to a coworker.
I am not familiar with King Root and if it can cause problems. Likewise, I am not familiar with KingoRoot.
I sounds like you are getting to a homescreen since you are seeing a clock widget and can open settings. It could be that your launcher has been compromised. If that is true, the simplest fix may be to reflash the stock NE1 rom. Doing so most likely will cause you to loose root.
@ShapesBlue do you have any other ideas on this?
Click to expand...
Click to collapse
Yeah, I would say to restore stock firmware but as you know, after 4.3 you have a locked bootloader, this includes the 4.4.2 that you have now, if you flash the stock firmware make sure you flash exactly what you have now or one of the newer stock firmwares, do not try anything older than your 4.4.2, that would be a downgrade and the locked bootloader can't be downgraded or the device will perma-brick. Flashing stock and doing root over again is the simplest solution compared to troubleshooting this issue, more could get messed up if you try too many things.
648charlie said:
I tried to root and it failed now I am trying to get My s3 verison 535 back to original. Unfortunately I no longer have my verizon service for this phone. I have tried to reset it but part way thru the set up it says set up failed.
Then It returns back to the verizon red screen
Any Ideas
thanks John
Click to expand...
Click to collapse
Sent from my SCH-I535 using Tapatalk
got launcher from google apps
Droidriven said:
Yeah, I would say to restore stock firmware but as you know, after 4.3 you have a locked bootloader, this includes the 4.4.2 that you have now, if you flash the stock firmware make sure you flash exactly what you have now or one of the newer stock firmwares, do not try anything older than your 4.4.2, that would be a downgrade and the locked bootloader can't be downgraded or the device will perma-brick. Flashing stock and doing root over again is the simplest solution compared to troubleshooting this issue, more could get messed up if you try too many things.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Loaded launcher from google apps, talked to verizon and they put s3 inservice for 5 minutes and I made a call.
all is well
thank you thank you
John
I unrooted with su in order to try get updates didn't work I used the. e LG one click method from source Forge that's somewhere up here. when I tried to reroot su got hung up and now it says I have to manually root. I do this stuff on the low on my . dad's pc for like a couple hours a week 2x a week sometime more. sometime less so what do I have to do to fix this I have a d850 with 5.01. so I tried running it through but it just give same results with that method. Help please
Updates via OTA are not possible by just unrooting with su. You have to revert back to KK and then proceed forward. You will end up downloading a few OTAs to get the most up to date version. Be prepared to spend a few hours. Then you will have to root again.
Sent from my awesome phone!
Thanks I guess it really isn't giant of a issue to me if its rooted and I started with lollipop I did it cause I'm a musican and needed an sd card fix now its done so is there any issues ill have to deal with leaving be
I'm also still on stock rom
Hey all, need some advice... I recently rooted my phone and found it wasn't for me (way too many apps stopped working). Because of this I tried to unroot the phone, but got stuck in a boot loop and had to recover from scratch.
Anyways, I'm running stock now and the system is back to being rooted. Problem is, I can't seem to update the phone. I'm not getting an error message either. Both Smart Switch and the phone simply say I'm up to date, but I'm on APB7 when I should be able to get APD3.
Is there anyway to fix this? Will I need to factory reset the phone? I'm not sure how to get the phone to recognize an update now.
Same here. I rooted my phone, installed TWRP but battery drain and apps not working properly made me go back to stock. Now I cant get any updates. I flashed APEQ fw yesterday dated June 8 but still dont get the June 17 updates.
I used Smart Switch to do an Emergency Reinstall of the firmware. Had to start over from scratch with my phone... It installed the lastest firmware though.
Been researching as much as I can online and it seems the consensus is simply unrooting the phone does nothing. You have to factory reboot. Tripping Knox won't stop you from getting updates but an unrooted phone that wasn't factory reset still won't get updates. Fun times. Last time I root my phone... Things aren't the same since I last rooted in Android 4.0. Now too many apps and updates etc. check for root and stop working if they detect it.
Luuthian said:
Hey all, need some advice... I recently rooted my phone and found it wasn't for me (way too many apps stopped working). Because of this I tried to unroot the phone, but got stuck in a boot loop and had to recover from scratch.
Anyways, I'm running stock now and the system is back to being rooted. Problem is, I can't seem to update the phone. I'm not getting an error message either. Both Smart Switch and the phone simply say I'm up to date, but I'm on APB7 when I should be able to get APD3.
Is there anyway to fix this? Will I need to factory reset the phone? I'm not sure how to get the phone to recognize an update now.
Click to expand...
Click to collapse
Did you use Odin to flash back to stock?
malek777 said:
Did you use Odin to flash back to stock?
Click to expand...
Click to collapse
I used the Emergency Recovery function of Smart Switch which, from my understanding, is basically the same thing. I know how to use ODIN but it seemed a better idea to go with the official solution. Guess I'll find out if it worked once the June update is available in Canada.