Hello, i recently had a problem rooting My moto G 6.0 and my phone ended in a bootloop så i flashed 5.1.1 lollipop. Now the problem is it cant update to marshmellow, when i search for update it says it already has the latest firmware. Hope someone can help. My moto G is a xt1541.
Update via fastboot
Sent from my MotoG3 using Tapatalk
ExHamza said:
Update via fastboot
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
And how do i do that? Just download 6.0 and Flash again?
Blablachef said:
And how do i do that? Just download 6.0 and Flash again?
Click to expand...
Click to collapse
Yes
Sent from my MotoG3 using Tapatalk
Is better flash Marshmallow firmware, than update via OTA. As I understand, you downgraded your phone to LL and if you update via OTA there is a risk of getting a brick.
See this guide: http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
You have to factory reset, don't forget.
Related
Hello,
Can somebody please give me a link to download stock kitkat Asia retail rom for MOTO G XT1033?
I searched for a long time but could not find a flashable zip file. Also didn't make a backup of my stock firmware :crying:
Additional details in screenshot.
Stock ROM XT1033
Motorola don't seem to have uploaded the 4.4.2 Stock ROM anywhere out there.
Download the 4.3 JB on the firmwares page below, & then update via OTA.
sbf.droid-developers.org/phone.php?device=14
P.S. Download the OTA update and update via sideload if you have troubles
Faith is the key. Don't lose it
And I thought ...
hey, thanks for your reply.
After hours of searching, I found this:
http://www.filefactory.com/file/3t4v75yvhrd5/RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
The build version is the same as the stock Kitkat rom. Although I haven't tried it yet, been lazy.
Personally, I do not think that Moto people would be so biased towards XT1033 Asia users and not even release the fw in question.
Would update once I have tried this rom.
anutham.s said:
Motorola don't seem to have uploaded the 4.4.2 Stock ROM anywhere out there.
Download the 4.3 JB on the firmwares page below, & then update via OTA.
sbf.droid-developers.org/phone.php?device=14
P.S. Download the OTA update and update via sideload if you have troubles
Faith is the key. Don't lose it
Click to expand...
Click to collapse
SOLVED
http://www.filefactory.com/file/3t4v75yvhrd5/RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
This is the stock Asia FW XT1033.
Flashed successfully.
Thank you
jared.leto said:
fillefactory.com/file/3t4v75yvhrd5/RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
This is the stock Asia FW XT1033.
Flashed successfully.
Click to expand...
Click to collapse
Thanks pal
jared.leto said:
http://www.filefactory.com/file/3t4v75yvhrd5/RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
This is the stock Asia FW XT1033.
Flashed successfully.
Click to expand...
Click to collapse
This goes in Indian dual sim?
And it is the one with fixed off support?
Sent from my XT1033 using Tapatalk
Yes, working fine with MOTO G bought from flipkart. :laugh:
What is fixed off support though?
jaspreet997 said:
This goes in Indian dual sim?
And it is the one with fixed off support?
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
jared.leto said:
Yes, working fine with MOTO G bought from flipkart. :laugh:
What is fixed off support though?
Click to expand...
Click to collapse
I meant otg support.....auto correct
Sent from my XT1033 using Tapatalk
It works.
Though not immediately but works. Although I have noticed that the OTG device gets detected quickly when the screen is locked as compared to when I am using the phone.
jaspreet997 said:
I meant otg support.....auto correct
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Hi Guys,
I've unlocked bootloader on my moto g(UK Version) , then installed 4.4.3 GPE,and updated to 4.4.4. Now i wanted to go back to stock motorolla rom(4.4.3 or 4.4.2).
I see a lot of people is struggling with that. Did anyone managed to do this? Can someone please post a guide? I really do not want to brick my phone for the second time
Thanks guys!
You can flash stock rom 4.4.2/4.4.3,if not,replace 4.4.4's gpt.bin to 4.4.2
I from 4.4.2 to 4.4.4 and flash stock 4.4.2,it is ok,and then ota 4.4.4
mih3y said:
Hi Guys,
I've unlocked bootloader on my moto g(UK Version) , then installed 4.4.3 GPE,and updated to 4.4.4. Now i wanted to go back to stock motorolla rom(4.4.3 or 4.4.2).
I see a lot of people is struggling with that. Did anyone managed to do this? Can someone please post a guide? I really do not want to brick my phone for the second time
Thanks guys!
Click to expand...
Click to collapse
Did you loose phone signal when you converted to GPE :good:
Just flash the modems
Sent from my Moto G using XDA Premium 4 mobile app
youland said:
You can flash stock rom 4.4.2/4.4.3,if not,replace 4.4.4's gpt.bin to 4.4.2
I from 4.4.2 to 4.4.4 and flash stock 4.4.2,it is ok,and then ota 4.4.4
Click to expand...
Click to collapse
That is way to downgrade from 4.4.4 GPE to stock moto 4.4.2? Is that working
Sent from my GT-N7105 using Tapatalk
windylawyer.1712 said:
That is way to downgrade from 4.4.4 GPE to stock moto 4.4.2? Is that working
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
You do not downgrade,flash stock 4.4.2 if you from 4.4.4
you can relpace gpt.bin only when you from 4.4.4 downgrade 4.3.
youland said:
You do not downgrade,flash stock 4.4.2 if you from 4.4.4
you can relpace gpt.bin only when you from 4.4.4 downgrade 4.3.
Click to expand...
Click to collapse
I dont get u well.sorry my poor english.
So, now i want to back to stock 4.4.2. I'm stuck with GPE 4.4.4
What extracly step i need to do
Plz help!
Sent from my GT-N7105 using Tapatalk
windylawyer.1712 said:
I dont get u well.sorry my poor english.
So, now i want to back to stock 4.4.2. I'm stuck with GPE 4.4.4
What extracly step i need to do
Plz help!
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
you can flash stock 4.4.2,you need not to do nothing.
moto g XT1033 Asia stock 4.4.2 download
http://pan.baidu.com/s/1AMP0i
pw: r0zo
youland said:
you can flash stock 4.4.2,you need not to do nothing.
moto g XT1033 Asia stock 4.4.2 download
http://pan.baidu.com/s/1AMP0i
pw: r0zo
Click to expand...
Click to collapse
Problem is many people try to do that then they brick their phone the partition is different and we cant flash via fastboot.
That's why i asked for
Sent from my GT-N7105 using Tapatalk
Listen to the man dude. Your just rambling now, we can flash over 4.4.4 and Recover from a brick. Their are a few tutorials and let's face it, if you can still enter fastboot.. Your phone not really dead is it..
Just download 4.4.2 firmware..
And Fastboot Flash everything EXCEPT motoboot and gpt.bin
Sent from my Moto G using XDA Premium 4 mobile app
windylawyer.1712 said:
Problem is many people try to do that then they brick their phone the partition is different and we cant flash via fastboot.
That's why i asked for
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
My moto g XT1033 from 4.4.4 downgrade 4.4.2,it is ok.
you can try delete fastboot flash partition gpt.bin,skip this command.
Clarkiieh said:
Listen to the man dude. Your just rambling now, we can flash over 4.4.4 and Recover from a brick. Their are a few tutorials and let's face it, if you can still enter fastboot.. Your phone not really dead is it..
Just download 4.4.2 firmware..
And Fastboot Flash everything EXCEPT motoboot and gpt.bin
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
youland said:
My moto g XT1033 from 4.4.4 downgrade 4.4.2,it is ok.
you can try delete fastboot flash partition gpt.bin,skip this command.
Click to expand...
Click to collapse
Thks for that. I still read for this problem.so many topics then i'm confused
So now, i will flash back to stock moto G firmware, without gpt.bin and motoboot.img, right?
Sent from my GT-N7105 using Tapatalk
Its touch and go to be fair, some phones are taking it okay. Others are having a hard time for some reason.. My advice if you phones booting okay at the moment leave it.. If you phone isn't.. You havent really got anything to loose.. There are a lot of people and they all have different experience with it one metjod may work another method might not..
Sent from my Moto G using XDA Premium 4 mobile app
windylawyer.1712 said:
Thks for that. I still read for this problem.so many topics then i'm confused
So now, i will flash back to stock moto G firmware, without gpt.bin and motoboot.img, right?
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
My moto g downgrade to 4.3,it is show：version downgraded for tz
I had flashed stock 4.4.2 and ota 4.4.4,it is ok now.
you can try to flash it without gpt.bin
youland said:
My moto g downgrade to 4.3,it is show：version downgraded for tz
I had flashed stock 4.4.2 and ota 4.4.4,it is ok now.
you can try to flash it without gpt.bin
Click to expand...
Click to collapse
U downgrade to 4.3 and flash 4.4.2 then OTA?
Sent from my GT-N7105 using Tapatalk
---------- Post added at 03:40 AM ---------- Previous post was at 03:38 AM ----------
Clarkiieh said:
Its touch and go to be fair, some phones are taking it okay. Others are having a hard time for some reason.. My advice if you phones booting okay at the moment leave it.. If you phone isn't.. You havent really got anything to loose.. There are a lot of people and they all have different experience with it one metjod may work another method might not..
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My phone is still working perfect.just poor battery and want to go back to stock i just want someone confirm a method to back to stock
Sent from my GT-N7105 using Tapatalk
i downgrade to 4.4.2 only.
Hi guys, I've tried flashing stock 4.4.3 on top of GPE 4.4.4 and it did not work. I did not flash motoboot and gpt , but i stil got error messages "File is too big" when flashing system.img_sparsechunk 1 2 and 3 .
If any of you have an idea how to resolve this, please let me know thx
i need to go back
yes you can. simply flash any custom rom u like..
Did you find any issues in MM?
Don't do it. First of all check if the bootloader got updated. Newer bootloader won't accept 5.1.1. If you updated via OTA you can't go back. Only option is CM13.
Sent from my MotoG3 using Tapatalk
I did the samething what I had to do is intall twrp download the lasted 5.1.1 lollipop I got mine from PAC ROM the surnia oh yeah dont for get gapps I get the mini but its what you want and that's the fastest way and safest way. Hope that helps
isawyouseeme said:
i need to go back
Click to expand...
Click to collapse
Why?
Sent from my MotoG3 using Tapatalk
Has anybody tested flash fire on moto g3... specifically for ota updates??
dev77745 said:
Has anybody tested flash fire on moto g3... specifically for ota updates??
Click to expand...
Click to collapse
Works only with stock recovery, don't try to update OTA using twrp.
Just install rsd lite, Motorola drivers and download a Verizon version. Unzip the rom and open the rsd. Now, search in the folder unzipped by the flashfile.xml. Put your device in fastboot mode holding power+vol-. Connect USB and press start. Don't disconnect the USB until rsd lite finish. This way you will have updates via ota.
Downloads:
Rom: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Driver: https://motorola-global-portal-pt.custhelp.com/app/answers/detail/a_id/89879
Rsd lite:
http://www36.zippyshare.com/v/86392122/file.html
Which region ROM is this?
Is it Chinese ROM?
briankariu said:
Which region ROM is this?
Is it Chinese ROM?
Click to expand...
Click to collapse
No, XT-1635-01. But it works.
Sent from my Motorola XT1635-01 using XDA Labs
WiserJr said:
Just install rsd lite, Motorola drivers and download a Verizon version. Unzip the rom and open the rsd. Now, search in the folder unzipped by the flashfile.xml. Put your device in fastboot mode holding power+vol-. Connect USB and press start. Don't disconnect the USB until rsd lite finish. This way you will have updates via ota.
Downloads:
Rom: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Driver: https://motorola-global-portal-pt.custhelp.com/app/answers/detail/a_id/89879
Rsd lite:
http://www36.zippyshare.com/v/86392122/file.html
Click to expand...
Click to collapse
Sent from my Motorola XT1635-01 using XDA Labs
Waiting for Oreo update.
WiserJr said:
Sent from my Motorola XT1635-01 using XDA Labs
Waiting for Oreo update.
Click to expand...
Click to collapse
Hi, you said there are no issues installing this rom on MZP chinese xt1635-03 using rsd lite. What about verizon apps? can these apps be uninstalled?
serg761 said:
Hi, you said there are no issues installing this rom on MZP chinese xt1635-03 using rsd lite. What about verizon apps? can these apps be uninstalled?
Click to expand...
Click to collapse
Yes, you can. Just it is need root.
Sent from my Motorola XT1635-01 using XDA Labs
Anyone with the Xt1635-02 version?
This is the verizon version, and it may take forever to get updated to Oreo
briankariu said:
Anyone with the Xt1635-02 version?
This is the verizon version, and it may take forever to get updated to Oreo
Click to expand...
Click to collapse
You can't take OTAs on -03 device using -02 ROM. It is only possible on Verizon version because they are using their own Updater app.
glebanych said:
You can't take OTAs on -03 device using -02 ROM. It is only possible on Verizon version because they are using their own Updater app.
Click to expand...
Click to collapse
It's true.
Sent from my Motorola XT1635-01 using XDA Labs
Can someone please share a screenshot of the bloatware on this rom? Also I assume rooting with magisk works on this rom. Right?
mahdif62 said:
Can someone please share a screenshot of the bloatware on this rom? Also I assume rooting with magisk works on this rom. Right?
Click to expand...
Click to collapse
Yes!
Sent from my Motorola XT1635-01 using XDA Labs
There are some bloatwares but nothing heavy, maybe 6 or 7 apps.
As Wisejr said you need to root to uninstall them. I also did the update via ota without any problem (security patch november 2017). The smartphone is fast enough but with marshmallow it is faster.
I have yet to test the battery but the duration seems unchanged. The only things I have noticed are that at startup a message appears on the unlocking of the bootloader and the logo is that of the verizon.
Can someone tell me how to delete the message and change the logo with the original one?
Last question: do you think it is possible to flash with rsd a stock rom (not verizon) and if yes, could you link the latest firmware available (complete image retail or reteu) ?.
Thanks to all and sorry for my english
Were you already running android Nougat before this install, or did you go straight to 7.1.1 from marshmallow? Thanks
Straight from marshmallow using rsd lite
Bootloader unlocked and phone not rooted.
---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------
Straight from marshmallow using rsd lite.
Bootloader unlocked and phone not rooted
I have some questions.
1) Does the Dual sim still work?
2) And should i update via OTAs after i flash it with Verizon ROM?
3) since I'm not in USA, can verizon rom create network issues?
TheDamnedRey said:
I have some questions.
1) Does the Dual sim still work?
2) And should i update via OTAs after i flash it with Verizon ROM?
3) since I'm not in USA, can verizon rom create network issues?
Click to expand...
Click to collapse
1) Yes.
2) Yes.
2) No. I'm from Brazil. :good:
Sent from my Motorola XT1635-01 using XDA Labs
Can I install it through minimal adb? Because my rsd doesn't recognize my phone, I don't know why :-/
Everton \o/ said:
Can I install it through minimal adb? Because my rsd doesn't recognize my phone, I don't know why :-/
Click to expand...
Click to collapse
Try to install the Rsd lite in another PC.
Sent from my Motorola XT1635-01 using XDA Labs
To install via fastboot: https://mirrors.lolinet.com/firmwar...26.118-23-12-7_7_release-keys-cid2_vzw.tar.gz
Sent from my Motorola XT1635-01 using XDA Labs
Does this re-lock the bootloader?
Can it be rooted with magisk?