StickMount on Android 6 is not working! - ONE Q&A, Help & Troubleshooting

Hi guys!
Today i bought a OTG cable and tried it one my OpO.
I installed StickMount, granted him Root access with the settings of Android 6. But my usb storage doesn't show up under /usbStorage... Maybe because i don't have SuperSU binaries?
Thnaks for your time!

When you conect OPO to PC you must change from Only charging to Mass storage, juct click on it.
sorry for my english

Related

[Q] can stock hc 3.2 read usb mass storage?

helo all,
I am using xoom wifi stock 3.2 . I am not rooted. I have an USB otg cable but when I plug any USB mass storage eg 4/8 gb my xoom don't show any device. What should I do now?
raihankabir_1 said:
helo all,
I am using xoom wifi stock 3.2 . I am not rooted. I have an USB otg cable but when I plug any USB mass storage eg 4/8 gb my xoom don't show any device. What should I do now?
Click to expand...
Click to collapse
I believe that you must be rooted to use the Xoom in USB host mode. I've been rooted from a couple of days after I bought my Xoom, so I don't remember.
You do have external sd card (read only) right?
Make sure that 'USB Debugging' is disabled.
i'm afraid you need custom rom for this.
okantomi said:
I believe that you must be rooted to use the Xoom in USB host mode. I've been rooted from a couple of days after I bought my Xoom, so I don't remember.
You do have external sd card (read only) right?
Click to expand...
Click to collapse
I have 32 gb SD card that xoom can mount but it can't joint USB drives
raihankabir_1 said:
I have 32 gb SD card that xoom can mount but it can't joint USB drives
Click to expand...
Click to collapse
Then as I thought, you need to be rooted and install a custom kernel or rom (Tachi kernel or Hammerhead rom for HC3.2) that says it enables usb OTG host mode in the releas notes. Then you can use your OTG cable (and the free app USB Mass Storage Watcher OTG) to mount and use thumb drives and newer HHDs (that don't require much power to run).
okantomi said:
Then as I thought, you need to be rooted and install a custom kernel or rom (Tachi kernel or Hammerhead rom for HC3.2) that says it enables usb OTG host mode in the releas notes. Then you can use your OTG cable (and the free app USB Mass Storage Watcher OTG) to mount and use thumb drives and newer HHDs (that don't require much power to run).
Click to expand...
Click to collapse
Thanks for the reply. Where can I get the steps for rooting? Is it possible to go back to custom rom after rooting?
raihankabir_1 said:
Thanks for the reply. Where can I get the steps for rooting? Is it possible to go back to custom rom after rooting?
Click to expand...
Click to collapse
Yes you can flash a custom rom.
For the correct rooting guide for your Xoom model (3G or WiFi-only, country of origin) check out the Xoom Heaven thread in General section 1st, to see if your Xoom model is addressed there.

[Q] USB mass storage connect problem

please help, I can not connect my phone to pc as usb mass storage (also with LG pc suite). when I connect usb cable and select turn on usb mass storage my pc is doing nothing, no driver installation, no do what? message and nothing new mounted in "my computer" ... knows anyone what do I have to do? please help ... ( lg p500, gingerDX v0.29, cwm)
I m also having this problem it seems that phones usb port is damaged or some problem with cable
Try to connet usb mass storage into recovery so might get to know that it is a software or hardware problem
Sent from my LG-P690 using xda premium
I have already tried it. Nothing :/ is there any way to fix this?
Install the new LG USB driver. No need of any suite. Check cable and ports.
It will work.
rr0yy said:
Install the new LG USB driver. No need of any suite. Check cable and ports.
It will work.
Click to expand...
Click to collapse
Thank you very much. It works now almost perfectly but for copying files to sd is it enough.

usb (otg) not working

I bought an otg cable from flipkart yesterday..
When I connect any pen drive it is showing damaged USB drive or blank USB drive.. I am really frustrated..
nithinte said:
I bought an otg cable from flipkart yesterday..
When I connect any pen drive it is showing damaged USB drive or blank USB drive.. I am really frustrated..
Click to expand...
Click to collapse
format it and try to make sure it works with another device to confirm its working then double check you have all the right stuff enabled in yout moto g.
eg usb debugging, root status, busybox perhaps., ect.
I have tried with 2 pen drives. Both working perfectly on pc..
My phone is not rooted. What is usb debugging??
nithinte said:
I have tried with 2 pen drives. Both working perfectly on pc..
My phone is not rooted. What is usb debugging??
Click to expand...
Click to collapse
Don't need root, busy box or usb debugging set.
What file system format are the drives? You need FAT32 for best compatibility between devices.
I have formatted the pen drive in fat32.. When I connect any pen drive in moto g, it is showing ' Damaged USB storage'
And in the notification area 'USB storage is damaged. Try formatting it'
When I try to format from moto g, screen goes black for 2 second and nothing happens..
Really fed up... I have not rooted my phone.. It is running kit kat
Please help me

[Q] USB mass storage on win 8?

Hi to all!
I'm an absolutely newbie in win phones, but a friend of mine have lost his photos beacause of repair service.
There is a way to set the phone as a USB mass storage?
In this way should be possible to use recovery programs....
Thank you for your answers and forgive my bad english!
Lunia 1020 is recognized as an MTP device by defaulf and you have access with explorer.
titi66200 said:
Lunia 1020 is recognized as an MTP device by defaulf and you have access with explorer.
Click to expand...
Click to collapse
MTP access is not enough for recovery programs, The memory must be recognized as a drive letter in windows, as a mass storage.

[Q] Mi 4i USB OTG Not Working

Hi,
I am extremely sorry if this is not the right place to ask this.
I got my Mi4i on the first flash. As soon as I got the phone, I did the MIUI 6.5.3.0 (LXIMICD) update. I did not check the USB OTG before the update, so not sure if it worked before the update or not. When I tried USB OTG, the Mount USB storage option is greyed out - always. I tried 2 different USBs and 2 different cables - still no luck. I am starting to suspect if its something wrong with this ROM release, as lots of areas in the setting is greyed out for me (for example, in the Headphones and Audio effects settings, the equalizer settings are always greyed out). So, have any of you tried USB OTG on MIUI 6.5.3.0? Any insights?
Yes I can assure u that USB OTG is working fine on MIUI 6.5.3.0
Check if the USB is a fat32 or ntfs?
Ntfs file system doesn't work with mi4i
Format the pen drive in fat32 and try again
I also tired a sd card reader it works brilliantly
Audio settings will be greyed out until u plugin headphones. Try any earphones or headphones then check if it still is greyed out
sharan.nyn said:
Yes I can assure u that USB OTG is working fine on MIUI 6.5.3.0
Check if the USB is a fat32 or ntfs?
Ntfs file system doesn't work with mi4i
Format the pen drive in fat32 and try again
I also tired a sd card reader it works brilliantly
Audio settings will be greyed out until u plugin headphones. Try any earphones or headphones then check if it still is greyed out
Click to expand...
Click to collapse
Thank you for the reply but I am still facing the issue...
Yes, the file system is Fat32 and the mi4i is still not recognizing the USB. Since the USB OTG is working fine for you, I suspect my OTG cable might be damaged ( weird- I tried 2 different cables).. Maybe I should try a different OTG pen drive?
PS: You were right about the audio settings, those worked when I plugged in the headphone..
same problem here.keyboard and mouse working but no usb drive with same otg cable. Otg card reader also not working.
Godinhell said:
same problem here.keyboard and mouse working but no usb drive with same otg cable. Otg card reader also not working.
Click to expand...
Click to collapse
If you're USB or SD Card is of huge capacity it may take time to load so I would suggest you to wait for a while, Android checks if the storage has an errors. It doesnt show in MIUI though. But wait for a while after plugging in.
NOT ABLE TO CREAT USER IN MI4I MIUI 6.5.3.0(lximicd)
Hi,
I am using Mi4i. In that phone I am not getting option for user or guest creation.
Other lollipop anroid version phones version having that option.
Please help me out for this.
sharan.nyn said:
If you're USB or SD Card is of huge capacity it may take time to load so I would suggest you to wait for a while, Android checks if the storage has an errors. It doesnt show in MIUI though. But wait for a while after plugging in.
Click to expand...
Click to collapse
Iam trying to use a 16 gb pendrive in fat32. And its not showing up for me as well. Help?
Sent from my Mi 4i using XDA Free mobile app
I have sandisk otg 64gb and it works without an issue. Make sure it is formatted with FAT. Other FS like exFAT and NTFS wont work, not sure about Fat32 though.
Hope this helps.
I bought a new 16gb Sandisk 3.0 OTG usb and its working fine for me now.
What's working:
* FAT formatted USB flash drives
* USB Mouse
* USB Keyboard
What's not working:
* NTFS formatted USB flash drives
* Portable USB hard drive
* USB Gamepad
I have an OTG cable lying around. Will soon test Linux file systems (ext2, ext3, etc.). Give me more suggestions, and i'll test it on the Mi 4i.
Sent from my Mi 4i
Hit thanks if I helped!
i just bought sandisk 32gb dual usb 2.0. This is working fine but showing the same drive i.e internal storage of the phone. is it a bug or normal?
Sent from my Mi 4i using XDA Free mobile app
update : it's working fine now.
Sent from my Mi 4i using XDA Free mobile app
stivinnaura said:
What's working:
* FAT formatted USB flash drives
* USB Mouse
* USB Keyboard
What's not working:
* NTFS formatted USB flash drives
* Portable USB hard drive
* USB Gamepad
I have an OTG cable lying around. Will soon test Linux file systems (ext2, ext3, etc.). Give me more suggestions, and i'll test it on the Mi 4i.
Sent from my Mi 4i
Hit thanks if I helped!
Click to expand...
Click to collapse
Aren't there root apps which enable ntfs support by installing a ntfs-3g driver?
The functionality is kernel-baked and not all kernels support the ntfs-3g driver. Also Xiaomi seems reluctant to release its sources anytime soon. There are alternatives like Stickmount however.
- Hit Thanks :thumbup: if you found it useful!
- Sent from my Mi 4i
OTG
i am not able to tranzfer files frm internal storage to usb flash drive via OTG on mi4i.. In Miui file explorer mount usb doesnt open up, if i use es file explorer i am able to view files, mount & Unmount, but cannot copy from internai to USB, BUT the reverse is posssible, I.e, i can copy frm usb flash to internal storage. pls hlp friends
Is the USB FAT32 formated? Because it supports only FAT32 formated flash drives.
Mi4i can not copy from internal to usb otg storage
Actually I got the same problem.
I can not copy some files from internal storage to my usb otg storage. It said "failed EACCESS".
Could someone help me out?
nandaleo72 said:
i am not able to tranzfer files frm internal storage to usb flash drive via OTG on mi4i.. In Miui file explorer mount usb doesnt open up, if i use es file explorer i am able to view files, mount & Unmount, but cannot copy from internai to USB, BUT the reverse is posssible, I.e, i can copy frm usb flash to internal storage. pls hlp friends
Click to expand...
Click to collapse
I tried to mount my memory card by connecting to a card reader and then to OTG cable but it gets disconnected after a short time. Showing message "USB removed unexpectedly ".I tried to connect it using a different OTG cable and a different Card Reader but the problem remains the same.Anyone please help me.
same problem here
Ahtisham Wani
can you explain what problem are you facing exactly?

Categories

Resources