My Xperia Z1 was connected to computer and was 100% charged last time i saw it live..and then when i tried to use the phone it didn't show anything i tried powering on but it just shows 3 Red Led Blinks, when i tried power on+volume up button it gives 3 vibrations with and nothing happens...i tried to connect it to my pc via usb cable nothing happens, no fastboot mode nothings happens except that 3 Red Led Blinks..i tried to charge it as someone told me that it can be low battery issue but while charging the LED indication show Red color...I also tried using the Reset button near the SIM card slot...3 vibrations and nothing happens... I tried everything... Any help will be appreciated.. Thanks In advance... Please Help... :crying:
Related
Hi Folks,
a friend gave me an Xperia Miro. I sould change the glass.
So i tried to turn on before change: nothing happend.
I changed the glass, tried to turn on: Nothing
Xperia on the charger for 2 days: LED blinks steady red (about 1-2s between blinks).
So i thought it was the battery - bought a new one.
Battery loading: Battery gets warm (!?!) but still nothing happens.
Tried hard reset (vol up & power) LED turns blue steady (while connected to Powerplug)
As i plug off, the LED stopps. When trying to turn on: nothing happend.
Another few hours of Charging (always stock cable & loader): After turn on 3x red for 10s. Afterwards red 1x each 1-2s.
Tried to connect to PC & SPCC: No connection - phone not detectet.
Phone was never rooted or similar.
Is there any trick left? Is this a known issue? Warranty is over - he said it worked before screen change but he didn't use it for months.
Thanks,
so i turned off my phone ,and i wanted to turn on
nothing happen
i won't charge
when i plug it with my pc i hear a sond of notification
but led light won't turn on
try to flash it with flashtool
when i press down or up volume nothing happens
what's the problem
the battery was full
Hi,
So yesterday I dropped my Tipo, nothing major, dropped it many times before with no issues, the screen stopped working - all lights worked and the phone itself was fine, just the screen remained black. Disassembled the phone and checked connectors etc, no issues from what I could see. I decided as a last ditch attempt to try and flash it back to stock using Flashtool, flashed it with ST21i Tipo_11.0.A.0.16_UK_Generic.ftf, completed with no issues. Disconnected phone and the LED indicator was green, nothing else happened on the phone - it wouldn't turn on etc. Decided to try flashing it again however when starting up Flashtool I noticed the previous ROM used although titled for a Tipo within Flashtool it was listed as ST26i where a Tipo is an ST21i, now everytime I connect the phone to the PC it starts in MTP mode and i'm unable to flash again or do anything, plus I can't enable debugging as the phone doesn't turn on. I've also tried using Xperia Companion however that doesn't pick it up at all.
Anyone got any ideas of what I could try next?
Update
Okay just an update, left the phone and the battery died. When trying to turn it on the red led flashed - usual battery dead indicator. So I decided to try charging it, pressed the volume buttons etc and noticed the green led come on. So managed to flash it again with the correct firmware. It seems to have done something as now when it's plugged in to charge it doesn't boot up but just shows the green led, if I press the volume up button when plugging it in the led will go blue. Anyone know what I can try now? As it seems to just boot into flash mode (green led) when turning it on and nothing else.
So the Xperia z3 will not start and it seems that it doesn`t charge, furhther it wont turn on.
Tried VOL+\- + Power button and the little button behind the SIM-Cover - no reaction
When I connect it with a (working) charging unit the LED will light up red and the display shows a battery-symbol filled red on the bottom (10%)for a few seconds, then it turns off and shows the same things (led and screeen). Well it is some kind of loop. I charged it for over 24 hours with different charging devices (up to >2A)
When I connect it to a PC the LED is dark blue. PC Companion says that the phone is locked and I schould unlock it, which is impossible as I am not able to turn the device on
Connecting it to the PC while holding the VOl- the PC Companion can do a software-repair and it says it works, but it doesn`t change the behavior of the phone.
I once got hands on an old Z3 wich showed the same behavior, it was just the battery. I changed the battery and it is now working fine again.
lordborken said:
So the Xperia z3 will not start and it seems that it doesn`t charge, furhther it wont turn on.
Tried VOL+\- + Power button and the little button behind the SIM-Cover - no reaction
When I connect it with a (working) charging unit the LED will light up red and the display shows a battery-symbol filled red on the bottom (10%)for a few seconds, then it turns off and shows the same things (led and screeen). Well it is some kind of loop. I charged it for over 24 hours with different charging devices (up to >2A)
When I connect it to a PC the LED is dark blue. PC Companion says that the phone is locked and I schould unlock it, which is impossible as I am not able to turn the device on
Connecting it to the PC while holding the VOl- the PC Companion can do a software-repair and it says it works, but it doesn`t change the behavior of the phone.
Click to expand...
Click to collapse
Mine Z3 Dual also have the same issue.. Replaced with new Battery.. Now it's working fine..
Yes, lt is the battery. The Signals are as If there is no battery connected (removed the battery to check) . Replaced it and it works
When I connect it to the charger it glows red green green and repeats for 2 times after. If I connect it to the PC and turn it on, the PC makes a connected device sound but still it doesn't turn on. Anyone here knows what it is? Is it bricked?
No clue and found little on a Google search.
If you can easily disconnect the battery, try that.
Better if you can command it to do a hard reboot.
A hard reboot can sometimes resolve issues.
May be a hardware failure.