Hi Folks,
a friend gave me an Xperia Miro. I sould change the glass.
So i tried to turn on before change: nothing happend.
I changed the glass, tried to turn on: Nothing
Xperia on the charger for 2 days: LED blinks steady red (about 1-2s between blinks).
So i thought it was the battery - bought a new one.
Battery loading: Battery gets warm (!?!) but still nothing happens.
Tried hard reset (vol up & power) LED turns blue steady (while connected to Powerplug)
As i plug off, the LED stopps. When trying to turn on: nothing happend.
Another few hours of Charging (always stock cable & loader): After turn on 3x red for 10s. Afterwards red 1x each 1-2s.
Tried to connect to PC & SPCC: No connection - phone not detectet.
Phone was never rooted or similar.
Is there any trick left? Is this a known issue? Warranty is over - he said it worked before screen change but he didn't use it for months.
Thanks,
Related
Hi to all,
2 days ago my phone just suddenly didn't want to turn on (before that it was turned on, with full battery, working normally - but after 2, 3 hours in a car /there was not direct sun, humid, etc../ it did not want to turn on).
When i put battery in the small light on the bottom of the phone starts to shine (it also changes colours to green, blue, yellow...) and phone keeps vibrating. If I hold power button for approx. 10 seconds than it stops vibrating. But the screen is black and nothing else changes.
I also did not install any updates or anything.
What could possibly be wrong?
p.s. when I try to connect phone with USB to my PC it recognizes that the phone is connected to the PC, but I cannot access to my personal data or do anything in Xperia PC programme..
Pc companion - repair? If repairing it doesnt work, you should ask sony service.
Sent from My Awesome Paradox ST21i
Hi. First of all, thanks for taking the time to read this. I know it's a long post, I'm just trying to be as detailed as possible.
I've a Moto G XT-1032 that stopped working a couple days ago. It has the original battery, original software. It didn't came with an original charger, so I have been using a Samsung Galaxy Tab one. The phone is almost two years old.
This is how it all started: It had low battery. When I got home it connected itself to the wi fi, and tons of whatsapp messages came at the same time. It went off.
I thought maybe it had drained the battery. Plugged it in to charge, didn't get the led on, and the battery showed 0% for an instant. Then the phone turned itself on, got the M logo and then the screen went black (like... some sort of backlight is on, but the screen is just black)
I turn it off, and it goes back on. No battery image, straight to the M logo, and then black screen. I tried holding power + vol down keys for more than 120 secs, finger pain is the only I got. It can access fastboot mode, but doesn't matter which option I pick, normal powerup, recovery, factory... I select them and then press vol up, but it just goes to the white screen with the M logo, then black screen.
When I plug the charger, and go to fastboot mode, it doesn't show battery charging. Just says battery low (or battery ok). When I plug it to the computer via the usb cable, and access fastboot, it shows battery charging.
The computer doesn't detect the device at all. First time I plugged it, it tried to install drivers, but failed. I downloaded them from motorola's page.
If I open motorola device manager, it tells me there aren't updates for my phone... So... I guess it's recognizing it? But I still can't see it. Windows only shows me my C and D drives, but not the phone. Tried different usb cables, different usb ports. Nothing changes.
I sent it to a service, they tested the battery and charging port, they said those were fine. But didn't find the problem.
Any ideas? Suggestions?
Thanks in advance!
Hi,
So yesterday I dropped my Tipo, nothing major, dropped it many times before with no issues, the screen stopped working - all lights worked and the phone itself was fine, just the screen remained black. Disassembled the phone and checked connectors etc, no issues from what I could see. I decided as a last ditch attempt to try and flash it back to stock using Flashtool, flashed it with ST21i Tipo_11.0.A.0.16_UK_Generic.ftf, completed with no issues. Disconnected phone and the LED indicator was green, nothing else happened on the phone - it wouldn't turn on etc. Decided to try flashing it again however when starting up Flashtool I noticed the previous ROM used although titled for a Tipo within Flashtool it was listed as ST26i where a Tipo is an ST21i, now everytime I connect the phone to the PC it starts in MTP mode and i'm unable to flash again or do anything, plus I can't enable debugging as the phone doesn't turn on. I've also tried using Xperia Companion however that doesn't pick it up at all.
Anyone got any ideas of what I could try next?
Update
Okay just an update, left the phone and the battery died. When trying to turn it on the red led flashed - usual battery dead indicator. So I decided to try charging it, pressed the volume buttons etc and noticed the green led come on. So managed to flash it again with the correct firmware. It seems to have done something as now when it's plugged in to charge it doesn't boot up but just shows the green led, if I press the volume up button when plugging it in the led will go blue. Anyone know what I can try now? As it seems to just boot into flash mode (green led) when turning it on and nothing else.
Hello,
I tried to power on my old Xperia E, but it only shows a red light.
When i charge it, it mostly blinks red, but sometimes it power on and goes of immediately.
I think it had TamsuiCM11.
I don't care if it is working or not, i'm just interested if i can get it working again.
Thanks.
I was saw a solution about that. It says: Eject the battery, later long press to power button (Nearly 10 second). And the last of: Plug the battery to phone.
------------------------------------------------------------------------------------------------------------
My solution: If you charging your phone with computer, you should try phone's charge adapter.
My solution: never again Sony...
So the Xperia z3 will not start and it seems that it doesn`t charge, furhther it wont turn on.
Tried VOL+\- + Power button and the little button behind the SIM-Cover - no reaction
When I connect it with a (working) charging unit the LED will light up red and the display shows a battery-symbol filled red on the bottom (10%)for a few seconds, then it turns off and shows the same things (led and screeen). Well it is some kind of loop. I charged it for over 24 hours with different charging devices (up to >2A)
When I connect it to a PC the LED is dark blue. PC Companion says that the phone is locked and I schould unlock it, which is impossible as I am not able to turn the device on
Connecting it to the PC while holding the VOl- the PC Companion can do a software-repair and it says it works, but it doesn`t change the behavior of the phone.
I once got hands on an old Z3 wich showed the same behavior, it was just the battery. I changed the battery and it is now working fine again.
lordborken said:
So the Xperia z3 will not start and it seems that it doesn`t charge, furhther it wont turn on.
Tried VOL+\- + Power button and the little button behind the SIM-Cover - no reaction
When I connect it with a (working) charging unit the LED will light up red and the display shows a battery-symbol filled red on the bottom (10%)for a few seconds, then it turns off and shows the same things (led and screeen). Well it is some kind of loop. I charged it for over 24 hours with different charging devices (up to >2A)
When I connect it to a PC the LED is dark blue. PC Companion says that the phone is locked and I schould unlock it, which is impossible as I am not able to turn the device on
Connecting it to the PC while holding the VOl- the PC Companion can do a software-repair and it says it works, but it doesn`t change the behavior of the phone.
Click to expand...
Click to collapse
Mine Z3 Dual also have the same issue.. Replaced with new Battery.. Now it's working fine..
Yes, lt is the battery. The Signals are as If there is no battery connected (removed the battery to check) . Replaced it and it works