Related
Has anyone had success installing xposed framework on the m8 running a stock rooted lollipop rom? I have tried multiple times following the guide in the xposed thread here http://forum.xda-developers.com/showthread.php?t=3034811 with no success.
It worked for me on adrenaline 2.1 but not on a couple of other roms I tried.
jas88 said:
It worked for me on adrenaline 2.1 but not on a couple of other roms I tried.
Click to expand...
Click to collapse
What were the steps you took to install it?
I opened xsposed installer >framework > reboot. I only downloaded a couple of modules but they work.
nmarietta said:
What were the steps you took to install it?
Click to expand...
Click to collapse
what steps are you using to install xposed? I have it working on Fluent 7.1 just fine.
BladeRunner said:
what steps are you using to install xposed? I have it working on Fluent 7.1 just fine.
Click to expand...
Click to collapse
I downloaded the files from the link I posted above..
Install the xposed installer .apk
Reboot from within the installer and grant root privileges.
Flash the framework via TWRP
I have also tried to flash the framework first, install the .apk, and reboot from within the installer to grant root.
Neither way has worked for me.
nmarietta said:
I downloaded the files from the link I posted above..
Install the xposed installer .apk
Reboot from within the installer and grant root privileges.
Flash the framework via TWRP
I have also tried to flash the framework first, install the .apk, and reboot from within the installer to grant root.
Neither way has worked for me.
Click to expand...
Click to collapse
I have it running on stock rooted, here are the steps I took.
Flashed the xposed arm zip file in TWRP
Installed the 3.0 alpha2 apk
Once installed I went into "framework" and hit soft reboot.
Once the phone was done I installed a module/made it active and soft reboot again.
I don't think you have to take these exact same steps but this is just what I did following a YT video. In "framework" it always says "Installation is only possible maunally via recovery for now." in red letters. That confused me into thinking it was not installed properly but all the modules I'm using are working fine.
The Stig 04 said:
I have it running on stock rooted, here are the steps I took.
Flashed the xposed arm zip file in TWRP
Installed the 3.0 alpha2 apk
Once installed I went into "framework" and hit soft reboot.
Once the phone was done I installed a module/made it active and soft reboot again.
I don't think you have to take these exact same steps but this is just what I did following a YT video. In "framework" it always says "Installation is only possible maunally via recovery for now." in red letters. That confused me into thinking it was not installed properly but all the modules I'm using are working fine.
Click to expand...
Click to collapse
I have tried to install this exact same way. After flashing the framework and installing the alpha .apk, I activated greenify and rebooted.
Upon launching greenify, I saw a yellow dialogue box that said auto hibernation service has stopped (auto hibernation worked fine before trying to use xposed) I attempted to enable the xposed features and a screen popped up telling me to install the xposed framework.
I have since restored my nand backup I made before flashing xposed, and greenify is back to auto hibernating, just cant use the xposed features.
nmarietta said:
I have tried to install this exact same way. After flashing the framework and installing the alpha .apk, I activated greenify and rebooted.
Upon launching greenify, I saw a yellow dialogue box that said auto hibernation service has stopped (auto hibernation worked fine before trying to use xposed) I attempted to enable the xposed features and a screen popped up telling me to install the xposed framework.
I have since restored my nand backup I made before flashing xposed, and greenify is back to auto hibernating, just cant use the xposed features.
Click to expand...
Click to collapse
Have you tried installing other modules? Looking around the greenify sections here on XDA seems it wasn't ready for 5.0, but there is a beta thread that you may want to take a look at.
http://forum.xda-developers.com/apps/greenify
The Stig 04 said:
Have you tried installing other modules? Looking around the greenify sections here on XDA seems it wasn't ready for 5.0, but there is a beta thread that you may want to take a look at.
http://forum.xda-developers.com/apps/greenify
Click to expand...
Click to collapse
I just found that beta thread, and I am now trying to install xposed again.
I also tried Xsense, and did not have any luck.
What modules are you using? I will activate them and test.
nmarietta said:
I just found that beta thread, and I am now trying to install xposed again.
I also tried Xsense, and did not have any luck.
What modules are you using? I will activate them and test.
Click to expand...
Click to collapse
Currently I'm using
Sense 6 lockscreen mods (LP)
Sense 6 Toolbox beta (to find the beta you have to change your settings, open the module in xposed/scroll all the way right to settings/change to "beta")
YouTube AdAway
YouTube Background Playback
The Stig 04 said:
Currently I'm using
Sense 6 lockscreen mods (LP)
Sense 6 Toolbox beta (to find the beta you have to change your settings, open the module in xposed/scroll all the way right to settings/change to "beta")
YouTube AdAway
YouTube Background Playback
Click to expand...
Click to collapse
I reinstalled xposed, and updated greenify to beta 11. I also installed Sense 6 Toolbox beta. Everything seems to be working just fine.
My problem was using modules that were not updated to work with lollipop. Thanks for all your help!
Hi to all of ya !
Freshly in the New World of Android. I just begin to Root, usually I Jailbreak I understood the principle, I've root my phone and everything goes well ! I install Xposed Installer to execute the module, but when I open Xposed and I go on Framework there is a problem of compatibility, in red it is noted : Xposed is not still compatible with Android SDK version 23 or architecture of your processor (armeabi-v7a). CANNOT LINK: library "libdvm.so" not found. So I can't execute any module !!!
Also i've superSu asks to update, but impossible it asks me to restart and do not update !
For what reasons I've all that, the root is well done verified with Root Checker :good:
Please you can help an old iphoner/jailbreaker which has just new androider/rooter
Can you help me and give me more information about "my" New World
Thanking you
Config:
Phone: LG NEXUS 5
OS: Android Marshmallow 6.0.1 SDK: 23
CPU: ARMv7 Structures: armeabi-v7a
Make sure you have flash correct version of xposed. For android 6.0.1 you need to flash xposed-v79-sdk23-arm.zip. you also need to update all Google apps to the newest version first else you will have nfc force closed
About the root and superSU. Please go to http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 then download the SuperSU zipfile. Flash it via twrp recovery.
muitenphale said:
Make sure you have flash correct version of xposed. For android 6.0.1 you need to flash xposed-v79-sdk23-arm.zip. you also need to update all Google apps to the newest version first else you will have nfc force closed
About the root and superSU. Please go to http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 then download the SuperSU zipfile. Flash it via twrp recovery.
Click to expand...
Click to collapse
Thanx guy :good: !
I download xposed-v79-sdk23-arm.zip and superSU last version 'cause i've got the 2.60 version. I'll try to do this tomorrow.
I've another request, u said that all Google Apps must be updated is it necessary to do this ? And how update it all ? Sorry i'm newer in Android
Thanx
AMB62300 said:
Thanx guy :good: !
I download xposed-v79-sdk23-arm.zip and superSU last version 'cause i've got the 2.60 version. I'll try to do this tomorrow.
I've another request, u said that all Google Apps must be updated is it necessary to do this ? And how update it all ? Sorry i'm newer in Android
Thanx
Click to expand...
Click to collapse
I don't know why he said you need to update all your google apps. Xposed will still install. But if you go into the Play Store, slide open the side menu and tap "My apps & games" you can see if you have any updates available there. If you're just running stock android that came with the phone, you are probably all up to date or you would be notified of updates.
AMB62300 said:
Thanx guy :good: !
I download xposed-v79-sdk23-arm.zip and superSU last version 'cause i've got the 2.60 version. I'll try to do this tomorrow.
I've another request, u said that all Google Apps must be updated is it necessary to do this ? And how update it all ? Sorry i'm newer in Android
Thanx
Click to expand...
Click to collapse
I don't know why but my Nexus 5 needs to be updated all system apps and also installed busybox before flashing the Xpose zip file. just for sure, let's update all apps and install busybox first then xposed
[problem resolved]
Hi Guys !
I took ur help n advice n it's seems work good :good:
Everything turn good Xposed / Framework / Modules / Tweaks...etc
BusyBox ? What's this n what do with it
I'm a newer in Android World n i like it.
Thanx 4 helpin me guys :good:
[problem resolved]
jsgraphicart said:
I don't know why he said you need to update all your google apps. Xposed will still install. But if you go into the Play Store, slide open the side menu and tap "My apps & games" you can see if you have any updates available there. If you're just running stock android that came with the phone, you are probably all up to date or you would be notified of updates.
Click to expand...
Click to collapse
Hi Guys !
I took ur help n advice n it's seems work good, finally i got Green Line n no Red Line :victory:
Everything turn good Xposed / Framework / Modules / Tweaks...etc
BusyBox ? What's this n what do with it
I'm a newer in Android World n i like it.
Thanx 4 helpin me guys
[problem resolved]
muitenphale said:
I don't know why but my Nexus 5 needs to be updated all system apps and also installed busybox before flashing the Xpose zip file. just for sure, let's update all apps and install busybox first then xposed
Click to expand...
Click to collapse
Hi Guys !
I took ur help n advice n it's seems work good, finally i got Green Line n no Red Line :victory:
Everything turn good Xposed / Framework / Modules / Tweaks...etc
BusyBox ? What's this n what do with it
I'm a newer in Android World n i like it.
Thanx 4 helpin me guys :good:
AMB62300 said:
Hi Guys !
I took ur help n advice n it's seems work good, finally i got Green Line n no Red Line :victory:
Everything turn good Xposed / Framework / Modules / Tweaks...etc
BusyBox ? What's this n what do with it
I'm a newer in Android World n i like it.
Thanx 4 helpin me guys
Click to expand...
Click to collapse
I've never been 100% on what BusyBox actually is but basically I think it's just more resources and little things that some root apps need to work. I don't think it's anything you can actually do anything with yourself so just leave it as it is.
jsgraphicart said:
I've never been 100% on what BusyBox actually is but basically I think it's just more resources and little things that some root apps need to work. I don't think it's anything you can actually do anything with yourself so just leave it as it is.
Click to expand...
Click to collapse
OK guy Alright
So there's no necessary 2 install it.
Thanx
AMB62300 said:
OK guy Alright
So there's no necessary 2 install it.
Thanx
Click to expand...
Click to collapse
I don't think you need it unless you find an app that tells you you do. I don't remember the last time I needed to install BusyBox by itself. If all your root stuff is working fine then you don't need it.
jsgraphicart said:
I don't think you need it unless you find an app that tells you you do. I don't remember the last time I needed to install BusyBox by itself. If all your root stuff is working fine then you don't need it.
Click to expand...
Click to collapse
OK perfect !
Yeah all of Root / SuperSU / TWRP / Xposed / Framework / Modules...is working good :good:
Thanx guy
Busy box is installed essentially with supersu/other rooting tools. Busybox on playstore installs the same binaries, it can be a useful tool, but not needed, as mentioned the same binaries are included in the root process.
wangdaning said:
Busy box is installed essentially with supersu/other rooting tools. Busybox on playstore installs the same binaries, it can be a useful tool, but not needed, as mentioned the same binaries are included in the root process.
Click to expand...
Click to collapse
Hi !
Ok thanx guy ! It's good 2 know it
:good:
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
reserved
reserved1
Can this be dirty flashed over your bs free bok3?
Sent from my SM-G900V using Tapatalk
---------- Post added at 05:14 PM ---------- Previous post was at 04:53 PM ----------
Just dirty flashed. All is good so far. Thank you
Sent from my SM-G900V using Tapatalk
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
renthispace said:
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Click to expand...
Click to collapse
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
renthispace said:
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
Click to expand...
Click to collapse
twelvevyan said:
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
Click to expand...
Click to collapse
I don't have any of these problems on mine. Does anybody else? It sounds like you guys might have some bad data from a previous ROM. The Play Store was updated in this ROM, so clear data for the Play Store, and that might fix the problem.
Stupifier said:
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Click to expand...
Click to collapse
It is just security patches in this ROM. I haven't found anything really new.
btonetbone said:
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Click to expand...
Click to collapse
I wouldn't expect Google Calendar to work, because it's not in the ROM lol.
Few Questions
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Big Thanks for your help.
I'm going to start a backup of current ROM so I'll be ready to install this soon.
Regards,
NerdyKowboy
NerdyKowboy said:
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Click to expand...
Click to collapse
Yes, flash means install in Safestrap.
If you flash the Xposed zip I linked in the original post, then you can use modules in the Xposed installer app included in the ROM.
CVertigo1 said:
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
Click to expand...
Click to collapse
1.) In safestrap, just do wipe->factory reset or is more of a wipe required?
2.) Can I flash them all using the Zip Queue in Safestrap (TWRP 2.7.1.0) or should I do them one at a time?
Factory reset in factory recovery. You can install all of them on one queue.
CVertigo1 said:
Factory reset in factory recovery. You can install all of them on one queue.
Click to expand...
Click to collapse
I did that, and this is AWESOME. Love the ROM. Tough to decide between the two launchers. Haven't had this level of control in a while.
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
NerdyKowboy said:
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
Click to expand...
Click to collapse
I believe Android Pay doesn't work sheerly because the device is rooted, not because of the ROM itself.
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
renthispace said:
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
Click to expand...
Click to collapse
Since Xposed is already in the ROM, inside of Xposed, go to Downloads & download the module "NoSafeVolumeWarning". Enable it and reboot.
Boom. No more volume warning.
NerdyKowboy said:
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Click to expand...
Click to collapse
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
al50 said:
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
Click to expand...
Click to collapse
Yes, that fixed the issue.
Successfully uninstalled Xposed, Reinstalled SnapChat and logged in without issue. Then, reflashed the Xposed framework.
So easy, but I was so nervous doing it after seeing many, many people talking about getting hung in a bootloop.
Good day everyone, this is a guide on how to enable Xposed on EMUI 3.1 (Working tested by me using the deodex method) and EMUI 4.0 (Working tested by me also and confirmed working by @Blackball,). - (Update using the deodex method 10-4-2016)
First of all the original guide for making this work on Huawei roms http://forum.xda-developers.com/honor-6/general/guide-workaround-running-xposed-t3338765. Ty @mfbcool for your guide and help. Please follow his instructions to the letter for making it work on our device.
- ([15-4-2016] New Instructions on the original thread no need to deodex the rom files, a working xposed zip has been developed for Huawei devices just flash it in twrp and do the build.prop modifications before you flash the zip for your version of rom. Already tested by me)
So my role in this is to highlight all the tips needed for making it work on our device, and the issues i faced when doing it. ([15-4-2016] The original thread is self explanatory, all of the tips here are already mentioned there this thread was created when we needed to deodex the rom files. So forgive me if i am not adding much.)
Notes
- I think a lot of the members were installing the wrong xposed files for our device we need the ARM-64 SoC files for our device because it's using the Kirin 930.
The Tips:
Lollipop:
1. The xposed files needed for your device are under the heading of: on Lollipop 5.0.x is: Xposed for EMUI 3.1 Android 5.0. (If you are on Lollipop 5.1.1 is: Xposed for EMUI 3.1 Android 5.1.1, if Marshmallow: Xposed for EMUI 4.0 Android 6.0)
http://forum.xda-developers.com/android/general/guide-workaround-running-xposed-t3338765
2. Make sure that after you install the xposed apk , you go to "build.prop" in /system using any file explorer with root and edit the line "ro.config.hwtheme=1" to "ro.config.hwtheme=0" and then save the file with the defualt permissions or you will get a bootloop. why editing the build.prop is important because without changing this the framework will not be active, you will get a red message saying framework not active. The only way to activate it is by editing this line or in the xposed app go to Settings if you enable "disabled resources hooks" doing that and then restarting will activate the framework but whatever module that uses resources will not work. So the only way working without affecting the modules is editing the build.prop file.
Marshmallow:
1. Make sure to add these lines ro.config.hwtheme=0 and ro.config.hw_theme=0 in build.prop in order for xposed to work and make sure to save the file with the defualt permissions or you will get a bootloop.
If you follow the original guide exactly and the tips you should have no issues making Xposed work.
P.S: By the way first boot may take a while (15+ mins), So don't be afraid.
Special thanks again to @mfbcool for his guide & help, and @pudup for directing me to the guide.
Sent from my HUAWEI GRA-UL00 using XDA-Developers mobile app
Thanks for the guide.
Its working for Marshmallow too. I have made a B317 deodexed Stock Rom zip file for TWRP and two test user installed Xposed.
Look here :
https://www.androidfilehost.com/?fid=24459283995307610
and here
http://www.android-hilfe.de/index.php?posts/9681033
Blackball said:
Its working for Marshmallow too. I have made a B317 deodexed Stock Rom zip file for TWRP and two test user installed Xposed.
Look here :
https://www.androidfilehost.com/?fid=24459283995307610
and here
http://www.android-hilfe.de/index.php?posts/9681033
Click to expand...
Click to collapse
Cool, are you facing any issues with it ?. So far on Lollipop no issues what so ever. By the way added your confirmation to the post if you don't mind.
I didnt tried it because im building at the moment a new version of my lollipop rom. The last version have still working xposed framework
Here a Screenshot from a test user.
working on p8lite so?
linus2014 said:
working on p8lite so?
Click to expand...
Click to collapse
Yes it's working on Huawei P8 lite too. Others have reported it working in the link of the original thread i posted. check it out.
Rashad83 said:
Yes it's working on Huawei P8 lite too. Others have reported it working in the link of the original thread i posted. check it out.
Click to expand...
Click to collapse
http://www.android-hilfe.de/thema/marshmallow-custom-rom-test-thread.762588/#post-9681033 this you say?
linus2014 said:
http://www.android-hilfe.de/thema/marshmallow-custom-rom-test-thread.762588/#post-9681033 this you say?
Click to expand...
Click to collapse
Nope, this http://forum.xda-developers.com/showpost.php?p=66036139&postcount=77
Rashad83 said:
Nope, this http://forum.xda-developers.com/showpost.php?p=66036139&postcount=77
Click to expand...
Click to collapse
thanks
Someone tried it with P8 Marshmallow? any bugs? thanks
00471 said:
Someone tried it with P8 Marshmallow? any bugs? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=66236747&postcount=19
I cant install xposed. When i install it, after reboot i get black screen with only one button of the navigation bar (i can access the shutdown menu from lock key, and i can access and the notification pannel, but nothing more). This is solved when i install the uninstall file.
My phone is already rooted. I firstly installed apk, and then installed xposed via twrp. I've tried to wipe the Dalvik but it doesnt solved.
My p8 is gra-L09, lollipop. Used this files: XposedInstaller_3.0_alpha4.apk, xposed-v80-sdk21-arm64.zip, xposed-uninstaller-20150831-arm64.zip.
What AM i doing wrong?
blocnt said:
I cant install xposed. When i install it, after reboot i get black screen with only one button of the navigation bar (i can access the shutdown menu from lock key, and i can access and the notification pannel, but nothing more). This is solved when i install the uninstall file.
My phone is already rooted. I firstly installed apk, and then installed xposed via twrp. I've tried to wipe the Dalvik but it doesnt solved.
My p8 is gra-L09, lollipop. Used this files: XposedInstaller_3.0_alpha4.apk, xposed-v80-sdk21-arm64.zip, xposed-uninstaller-20150831-arm64.zip.
What AM i doing wrong?
Click to expand...
Click to collapse
Did you deodex the rom? you have to deodex in order for xposed to work for Huawei devices, which version of Lollipop are you using?.
I flashed today the C636B320 Marshmallow firmware, and then i deodexed the rom per instructions to make xposed work on Marshmallow.
First attempt i failed because i didn't wait enough, you see the screen will get stuck on Huawei boot animation without any sign that anything is happening(no app update notification card like in Lollipop) for like a 20+ mins. Then voilà the phone booted normally. Also exposed is working fine no issues, make sure to flash xposed-v80-sdk23-arm64.zip instead of the latest one v81 which doesn't seem to work for me.
Rashad83 said:
Did you deodex the rom? you have to deodex in order for xposed to work for Huawei devices, which version of Lollipop are you using?.
Click to expand...
Click to collapse
I realized that, that i was missing the other tutorial and solved it. Thanks anyway
Installing Xposed Framework for Samsung Galaxy J7 Prime
Doing this may cause your device to be bricked or stuck in a Bootloop, so you're solely responsible for any damage caused to your phone
Downloads :
XposedInstaller.apk : Must be installed to manage installed modules, the framework won't work without it.
Xposed.zip : Must be flashed using a custom recovery, if you don't have one yet check out my thread here to see how to flash CWM recovery.
XposedUninstaller.zip : If you want to uninstall the framework/If you are stuck in a bootloop.
Use Sideload to flash Zip because there's an issue of SDCARD and EXTSDCARD not mounting in CWM Recovery
First boot up your phone into CWM recovery
Go to Install zip update package and select Install zip from sideload
Now connect your android device to your computer
Download this and extract it.
Open command prompt in the ADB folder (mfastboot-v2 folder) by right clicking in the empty space of the folder while holding the Shift key.
Copy the Zip file you want to install on your device to the ADB folder, in this case Xposed.zip.
Run the following command to sideload zip to your phone : adb sideload <filename.Zip>
In this case adb sideload Xposed.zip
Similarly if you want to uninstall the framework flash XposedUninstaller.zip.
Credits:
@rovo89 @wanam
The xposed version you have posted above is causing continous bootloop. I installed it on my J7 Prime 610F. Then since being a long time samsung user. i knew that maybe i have to flash xposed framework version made by Wanam for Samsung devices.
So The wanam xposed V86.1 Sdk23 for Arm 32bit works fine and then the phone booted up. better change it to this version in ur above link bro
Thanks for the detailed adb guide as we know still TWRP Touch or drives in CWM are not mounting and one has to use the adb commands. for J7 Prime
kingwicked said:
The xposed version you have posted above is causing continous bootloop. I installed it on my J7 Prime 610F. Then since being a long time samsung user. i knew that maybe i have to flash xposed framework version made by Wanam for Samsung devices.
So The wanam xposed V86.1 Sdk23 for Arm 32bit works fine and then the phone booted up. better change it to this version in ur above link bro
Thanks for the detailed adb guide as we know still TWRP Touch or drives in CWM are not mounting and one has to use the adb commands. for J7 Prime
Click to expand...
Click to collapse
Thanks dude
I'll definitely use wanam links as it's working fine on J7 2016
P.S. This one should be good? xposed-v87.1-sdk23-arm-custom-build-by-wanam-20161125.zip
And yes i've already updated the links
Yes i think so it should .never had problems with Xposed framework by wanam for Samsung devices , doesnt cause bootloops.
I have V86.1 by wanam sdk23...Will test the V87 as well....
kingwicked said:
Yes i think so it should .never had problems with Xposed framework by wanam for Samsung devices , doesnt cause bootloops.
I have V86.1 by wanam sdk23...Will test the V87 as well....
Click to expand...
Click to collapse
Okay...i think i'll give Xposed a try to
help me out from this
your work is absolutely appreciable but, the link you given is doesn't work, i m trying to all off way to flash xposed.zip in my sm-j610f but all are stuck me, pls give update of framework, bcs... i can't live without gravity box and xmessanger privacy premium and so many module, and also guide how use viper4android on j 7 prime
nyk978 said:
your work is absolutely appreciable but, the link you given is doesn't work, i m trying to all off way to flash xposed.zip in my sm-j610f but all are stuck me, pls give update of framework, bcs... i can't live without gravity box and xmessanger privacy premium and so many module, and also guide how use viper4android on j 7 prime
Click to expand...
Click to collapse
Xposed Framework for Samsung Devices by wanam works just fine , im using it at the moment.. download from here. i dont use viper4 android so no idea...
https://www.androidfilehost.com/?fid=529152257862685344
thanks for the link, I'll try it today and tall you the success rate
and, viper4android is the sound enhancement, like... dolby atmos, but more then Dolby
kingwicked said:
Xposed Framework for Samsung Devices by wanam works just fine , im using it at the moment.. download from here. i dont use viper4 android so no idea...
thanks bro
it is work like charm...
thank you so much my friend
success rate... 100% :laugh:
Click to expand...
Click to collapse
Link Caidos
Link Rotos
Dear @kingwicked
At first: Sorry for intruding , But I think you can help Because of your experience in xposed
I used APM (xposed module ) in order to manage & mode power button menu as : ....advanced reboot..screen recorder & shots..
it worked for almost phones except J7p
kindly can you guide me to an working one ( module) to manage power button
thanks in advance
---------- Post added at 03:54 ---------- Previous post was at 03:38 ----------
BTW @HaxerProz
since TWRP forJ7p It evolved more
so if you have pen-drive (USBotg) you can put your needed *zips
as xposed or other, and simply flash them via twrp
after you mount you usb storage ( tested by me)
maybe also you can use flashify.apk ( I didn't test it )
xcorona said:
Dear @kingwicked
At first: Sorry for intruding , But I think you can help Because of your experience in xposed
I used APM (xposed module ) in order to manage & mode power button menu as : ....advanced reboot..screen recorder & shots..
it worked for almost phones except J7p
kindly can you guide me to an working one ( module) to manage power button
thanks in advance
---------- Post added at 03:54 ---------- Previous post was at 03:38 ----------
BTW @HaxerProz
since TWRP forJ7p It evolved more
so if you have pen-drive (USBotg) you can put your needed *zips
as xposed or other, and simply flash them via twrp
after you mount you usb storage ( tested by me)
maybe also you can use flashify.apk ( I didn't test it )
Click to expand...
Click to collapse
dont have J7 anymore sold it... sorry mate
EDIT: Never mind. Answered my own question.
Recommend using the wanam xposed V86.1 Sdk23 for Arm 32bit like @kingwicked
The version v87.1 you have post still causing bootloop on my phone J7 prime sm-g610f.
And, fix the links for xposed framework and xposed uninstaller please.
hai9997 said:
Recommend using the wanam xposed V86.1 Sdk23 for Arm 32bit like @kingwicked
The version v87.1 you have post still causing bootloop on my phone J7 prime sm-g610f.
And, fix the links for xposed framework and xposed uninstaller please.
Click to expand...
Click to collapse
Hi there. Did you wipe cache & dalvik cache after flashing 87.1?
Fiasco said:
Hi there. Did you wipe cache & dalvik cache after flashing 87.1?
Click to expand...
Click to collapse
No, I didn't. Is that the reason which caused bootloop?
hai9997 said:
No, I didn't. Is that the reason which caused bootloop?
Click to expand...
Click to collapse
That may be the reason. I flashed 87.1 on my J7 Prime, then wiped cache & dalvik cache and after the first boot, (which takes a while), it booted into the OS with Xposed installed.
Fiasco said:
That may be the reason. I flashed 87.1 on my J7 Prime, then wiped cache & dalvik cache and after the first boot, (which takes a while), it booted into the OS with Xposed installed.
Click to expand...
Click to collapse
Oh thank you. I'll try re-flash v87.1.
Btw, do you have xposeduninstaller?
hai9997 said:
Oh thank you. I'll try re-flash v87.1.
Btw, do you have xposeduninstaller?
Click to expand...
Click to collapse
All wanam files are hosted here: https://www.androidfilehost.com/?w=files&flid=37508
nothing happens
after flashing xposed v8.7.1 it just said placing files done and ended the process after i reboot there is no xposed.. same happened when i tried flashing 8.6.1. any help guys?