I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
Hey Folks,
I just disassembled my Photon.
The glass was broken and I got a new one on ebay.
Disassembly went good, i used this guide.
On boot, the LCD backlight turns on, but screen stays black. green LCD in upper left corner blinks just as usual. (turns red when charged)
this issue was discussed in the video comments, but there came no other solution then "check plug, check cable"...
The cable of the LCD screen seems ok, i can't see any broken lane, and the plug is fine too.
Did anybody experience this issue and could give me a hint?
Thanks guys
yes, had absolutely the same issue when replacing the glass.
Solution = replacing lcd,too.
sorry
This is so annoying.
I just tested again.
I used "Windows CE Remote Zoom" (this is shipped in the Visual Studio Toolbox) to get a view to my phone. It responds to my guestures, also sends a signal on some touches to vibrate (bottom bar).
backlight is workin, but no picture on the screen.I hate it so much, hate it.
At least I could do a PimBackup, tryin to touch the right area on the screen using "WinCE Remote Zoom"...
[Added]
I shot a used device on ebay, which didn't cost me as much as a new LCD-screen. On The other hand, I am pretty good in assembling the mini. If anyone needs info, PM me
Guys,
Recently I broke my touchscreen, but ordered a new one and replaced it myself. Almost everything is fine, except one approximately 1cm wide line near the top of the screen. When I enabled the show touches in developers options, it showed that the screen is registering touches above or under that range and even two touches, when I tap in the middle of the range. Do you think that the replacement part is broken or only a cable needs to be reseated?
So I have 4 p925s that I have bought to repair. I decided to update 3 of them to the latest 4.0.4. Everything went smoothly except I noticed 2 of them the touch screen no longer responded after the update. When I touch the screen the soft keys light up as if it recognizes that I am touching it but it does not respond otherwise. One of the phones I had previously had the "show touches" in the developer options and I noticed that if I touched with one finger it would not show up but it 2 fingers it responded however it was chaotic and not as it should (I touch left of screen it shows touch on right. I move fingers up it goes left or down)
after swapping hardware around I noticed that the screens worked on the phone I did not update perfectly and the screen that worked on the 3rd updated phone worked on all three so I know its not the screens. What I figured out is the the screens that didn't work on the updated phones were replacement screens (ebay bought) and the only screens that did work were original screens that were oem.
Does anyone have any idea how to fix this issue other then the obvious "buy oem glass and digitizer"
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hi all,
after a drop the glass of my 16GB OPO crashed. The touchscreen doesn't work anymore, if I touch at any point of the screen nothing happens. Btw, the LCD display still works as you can see from the pic.
So:
Broken glass;
broken touchscreen;
Working LCD panel.
What's the best and/or cheaper place to buy a quality glass+touchscreen?
Thanks in advance.