I'm using Microsoft Wireless Adapter with my S7, so I press on the Smart View from the phone's menu to screen mirror then I open a video with VLC, any video I open it lags and stutters, this was not happening with my Note 4, I know the S7 is better specs wise than the Note 4, I'm wondering is anyone experiencing this with their S7?
anybody experiencing this?
I just need one person who uses the Smart View to screen mirror to tell me that there is lag or not.
hello?
I just watched an entire 2 hour movie and it played fine with no stutters. If looking at the phone to screen sync. The phone runs the video then send a delayed video to the TV. It's fine cause I'm not watching both at the same time. I use mxplayer.
Sent from my SM-G930V using Tapatalk
Related
Is anyone having a problem with the hdmi signal cutting out on their g2x? i plug it in and i was watching a netflix movie, it would go black for about 2 seconds and then show again. Thought it might be a netflix problem till i tried youtube and also playing a movie off of my sdcard. The picture looks great and it seems to be working perfect accept for the screen going black. Its pluged into a50 inch plasma 1080p tv and im using eaglebloods gingerbread rom which doesnt have hmdi options in the settings is this an issue with that rom?
same.
I have the problem, its so annoying, only happens when mirroring hd video. Maybe its the cheap ebay cable im using? or the rom?
if you guys are using CM7 its a common issue since CM doesnt support HDMI output. thats why there isnt a setting of it, of course it still works with games and everything but the movie playing is what it has a problem with. hope this helps
does anyone else notice a very slight stutter when playing youtube videos using the included youtube player? the audio is perfect and so is the picture quality but literally every second on smooth panning/movement scenes i see it. htc watch trailers don't seem to suffer this but ive only watched a few so far.
same videos play fine on my hd2 running wm (audio slightly out of sync but thats a known hd2 thing)
i get the same results using wifi, or cellular network and still the same if i allow the video to fully download.
even worse ANYTHING that brings up any on screen display makes the video lag for a few seconds, the watch app lags with osd stuff too.
rebooting doesn't make any change
is this just the way it is or could something in the background be causing it, maybe some of the crud installed by my network (3 uk) ?
It's interesting that you mentioned it. I've has the same preborn with my first sensation. I exchanged it for dust problem last week, and surprisingly, the new one doesn't stutter with the same settings.... It Really beats me...
Sent from my HTC Sensation 4G using XDA App
jparity said:
It's interesting that you mentioned it. I've has the same preborn with my first sensation. I exchanged it for dust problem last week, and surprisingly, the new one doesn't stutter with the same settings.... It Really beats me...
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
no dust problem for me luckily, did you have dust from the beginning or has it worked its way in somehow.?
ive tried everything i can think of except for a factory reset and i still have the youtube stutter, youtube player and streaming media player both drop frames and really badly stutter if there is any sort of on screen display or info showing over the video.
streaming watch trailers on mvideoplayer is perfect in every way though! so it seems the hardware can do it and is working fine.
I have been trying out Netflix on my TF700 and displaying on a 120hz 1080p Vizio. The sound is very out of sync with the video. This is using the HDMI port on the TF700, no bluetooth involved. During the movie there were several times when the picture became very mottled and blotchy like the video processor couldn't keep up and reduced resolution. Is the poor performance the App's fault, ICS, or what ever.
The Netflix App is so poor it is painful to use. Will be cancelling the free trial just because the App is so bad.
skyterrier said:
During the movie there were several times when the picture became very mottled and blotchy like the video processor couldn't keep up and reduced resolution. Is the poor performance the App's fault, ICS, or what ever.
Click to expand...
Click to collapse
Get wifi analyzer from the market and see if you can choose a better (less occupied) wifi channel. The blotch is typically reduced resolution due to the connection, not the processor. Thanks to prolific hardware decoding, tegra 3 coasts through video.
Can't speak for the sync issue though. Is it in sync when you aren't using HDMI-out?
If you were using MX player, I'd say use s/W decoding for audio out of sync issues. Bit Netflix doesn't let you change those kinds of settings. Do like other poster said and try a less crowded channel.
ASUS hasn't updated the HDMI features on the Firmware version for the Infinity, it lacks a couple options that allowed you to properly fit your tablet to your HDTV's display.
The Transformer Prime has these options in it's latest firmware released several months ago, but these options are absent in the Infinity.
My only hope is that these issues are resolved once ASUS ever get around to releasing Jelly Bean for the Infinity.
I have the same problem with my new infinity. The prime it replaced worked very well with the Netflix app.
I do not see similar problems with
other video, so far.
BS player as well has great reviews and tons of features
Sent from my LG-E610 using Tapatalk 2
fortunz said:
Can't speak for the sync issue though. Is it in sync when you aren't using HDMI-out?
Click to expand...
Click to collapse
Just tried watching a movie on the TF screen and everything was in perfect sync. The HDMI output appears to be where the out of sync condition is being introduced.
I haven't tried Netflix with the HDMI out. On my Evo 4G, when I do it, it sometimes gets out of sync. You just have to stop, and restart the movie. It works most of the time.
As for Netflix, when in the app, if it's laggy as all can be, go into the developers section in settings and turn on force 2D. It helps significantly. Read it somewhere on here and tried it. Might even help with the sync issue.
Thanks for the 2g tip makes netflix work much better. Scrolling with normal settings is terrible even without hdmi. Works normally after changing settings force 2g.
Woody
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
---------- Post added at 01:52 PM ---------- Previous post was at 01:42 PM ----------
I did change force 2g to on. Netflix works much better. Voice did sync on hdmi in netflix and YouTube. A little delay on Netflix until stream got going about 1 min. I had forgotten to turn off program running on roku so i had two streams at same time. Since Netflix was almost unusable with 3g excel on and using hdmi, i did not try sync test.
Woody
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
I've found that my infinity doesn't output 1080p on the HDMI. Works on YouTube which leads me to believe its the Netflix app itself. Are you guys using the stock Netflix app or threaD modded one?
Sent from my ASUS Transformer Pad TF700T using xda premium
When i first hooked up tf i had a small boarder off screen on tv. I changed tv settings to adjust vertically and screen resized properly. I had no problems viewing netflix on hdmi to my tv. Video did not play on tf, but did show everything else.
I recently change my dsl from 1.6 meg to 12 meg. Huge difference. I am amazed that Netflix can stream at slower speeds but quality goes way down. I've read that you need at least 4 to 6 meg for good playback. Problems with playback may be caused by slow dsl.
Test on resolution of tv
Tv shows 1920 x 1080 on home screen of tf. When Netflix plays video tv shows 1280 x 720. Tf is changing hdmi output depending on what its playing.
Hulu plus will not play on hdmi.
Amazon plays through browser standard def.
Stock Netflix
Woody
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
To remove the bottom on screen navigation keys with HDMI out enabled:
Go to Settings, then click on the HDMI category at the bottom. The navigation bar at the bottom of the screen will disappear and you will have native 1920 x 1080 full screen output on the TV.
It's really weird that clicking the HDMI category / row instantly removes the navigation keys. It would have been better to have a show / hide preference in the HDMI settings pane...
Hey,
I recently bought the Netgear PTV3000 and I am using it with my Nexus 5. Installation and everything else worked like a charm.
Things I'm wondering about:
- Whenever I connect my Nexus 5 to my TV, the screen resolution of the TV switches from 1080p to 720p. How come? It's supposed to be 1080p.
- In a couple videos on YouTube I saw that Samsung devices dont mirror the screen when stream videos but rather show a UI for controlling. How can I achieve this on my Nexus?
THX in advance!
david.skx said:
Hey,
I recently bought the Netgear PTV3000 and I am using it with my Nexus 5. Installation and everything else worked like a charm.
Things I'm wondering about:
- Whenever I connect my Nexus 5 to my TV, the screen resolution of the TV switches from 1080p to 720p. How come? It's supposed to be 1080p.
- In a couple videos on YouTube I saw that Samsung devices dont mirror the screen when stream videos but rather show a UI for controlling. How can I achieve this on my Nexus?
THX in advance!
Click to expand...
Click to collapse
samsung is probably running allshare to a samsung tv.
how did you get yours to connect at all?
i can't get my n5 to connect to anything with miracast.
Hi guys, I am fairly noob but I was hoping to get some help.
I currently have a:
Oneplus One
Netgear PTV3000 connected into the Appradio 3.
I am struggling to get mirroring to work without being jittery and laggy. I have tested the PTV with the Samsung S5 and S4 both have nil issues. When I use the Oneplus One there is constant audio skipping and video lag and the phone is slow to respond from the screen of the Appradio 3. I have rooted the phone but it is completely upto date.
Is there something I am doing wrong? Any suggestions as to how I could improve the responsiveness and removing screen mirroring lag? There are no controls for the casting other than connecting and disconnecting.
I have placed the phone on top of the Netgear but nothing seems to get rid of the lag. It is also intermittent sometimes it is flawless other times it is terrible. I have the phone on Performance mode which is 2.5ghz.
Thanks
nzwizard said:
Hi guys, I am fairly noob but I was hoping to get some help.
I currently have a:
Oneplus One
Netgear PTV3000 connected into the Appradio 3.
I am struggling to get mirroring to work without being jittery and laggy. I have tested the PTV with the Samsung S5 and S4 both have nil issues. When I use the Oneplus One there is constant audio skipping and video lag and the phone is slow to respond from the screen of the Appradio 3. I have rooted the phone but it is completely upto date.
Is there something I am doing wrong? Any suggestions as to how I could improve the responsiveness and removing screen mirroring lag? There are no controls for the casting other than connecting and disconnecting.
I have placed the phone on top of the Netgear but nothing seems to get rid of the lag. It is also intermittent sometimes it is flawless other times it is terrible. I have the phone on Performance mode which is 2.5ghz.
Thanks
Click to expand...
Click to collapse
I found that if I connect through WIFI Direct first manually and then use screen casting there is a significant improvement in quality though some lag still remains.
I use an LG smart TV and its fine, just a little delay as to be expected.
The slight lag is fine it is the constant jittery music which is frustrating. its not interference. its the mirroring. But I don't know if its hardware or software.
So I have figured out why the miracast is lagging on the PTV3000. The data uploaded is reaching peak of about 5-6mbps. By monitoring the bandwidth the lag only occurred when this number was reached. \