Hi all.
I decided to root my brother's Moto G (2013). I have already unlocked the bootloader and tried flashing TWRP recovery for this model, but once I flashed it and tried accessing recovery, it just always says 'Boot up failed'. Also, there is no error in CMD while flashing, which makes it even more weird. Finally, I can boot to OS with no problem (phew!). Any solutions? I tried searching for that issue on the internet, but not much came up.
EDIT: Please close the thread, issue has been solved.
Thanks.
You can run "fastboot boot twrp.img" from the directory where is your twrp.img , and try
Try installing another recovery or verify the file (can be a corrupted file)(twrp.img)
Enviado desde mi Moto G mediante Tapatalk
Related
What Happens?
My phone weather rebooted from adb, bootmenu, powered off and then on, rebooted from recovery, always boots in bootloader.
It says UTAG "bootmode" configured as fastboot
From bootloader I can go to recovery or regular power up! it all works.
Just I have to face the bootloader every time my phone turns on!
When did this occur?
I don't know, I flashed 3 firmwares back-to-back and then got back to GPe. I booted to bootloader in all ways. I remember me going to bootloader from my XT1033 stock ROM's boot menu, then once using adb reboot bootloader, and once going by pressing VolDown+Power. So I kind of messed up. And then after setting down to a ROM. I rebooted and realised!
What did I try to recover
1. Flashed bootloaders from different firmware
2. Went back to Stock
3. Tried all adb reboot commands
4. Tried all reboot methods from bootmenu
Help Please!
Everything else is working fine, its not a panic attack, but i need a solution
Do "fastboot oem fb_mode_clear"
Enviado desde mi Moto G mediante Tapatalk
Take a backup. And make a full & clean install of stock ROM. Your problem should be solved
I would suggest not to mess with BL , you will get in to trouble
Sent from my XT1032 using Tapatalk
reversegear said:
Take a backup. And make a full & clean install of stock ROM. Your problem should be solved
I would suggest not to mess with BL , you will get in to trouble
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
I have done that more than once!
That doesnt solve the problem! and the prooblem didn't start becaues of BL.
Going to stock doesnt change anything!
Boss442 said:
Do "fastboot oem fb_mode_clear"
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
That solves the problem!
What is the purpose of fb_mode_set/fb_mode_clear
I would liked to know more!
I asked this question at http://forum.xda-developers.com/showthread.php?t=2738055
But i didnt get a reply there as well!
reversegear said:
Take a backup. And make a full & clean install of stock ROM. Your problem should be solved
I would suggest not to mess with BL , you will get in to trouble
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Too lazy to not try this:
fastboot oem fb_mode_clear
solved the issue in 1 sec.
help
Hi i already try that fastboot oem fb_mode_clear but still nothing if i turn the phone off as soon as i turn it un it goes back straight to bootloader i have to press normal powerup in order for the phone to boot what else can i do
Bricked MOTO 2 G XT1063 stuck at Bootloader - utag flash fail configured as fastboot
hi mine is XT1063 Bricked, after doing fastboot oem fb mode clear, still i am not able to boot normal.
it says:
boot up failed
failed to validate ftm image
that means its not fih ftm mode
load and validate boot image
failed to validate boot image
Hello everyone. I just received the 5.0 update, and I was so excited to update it, and when my phone started rebooting to get to the upgrade process; it opened the TWRP menu. And from there I couldn't install the update. (Yes, I did press update device, and it restarted like it went to update, but instead it just opened TWRP menu.
How can I reset my Moto G XT1032 GB to the complete stock, without boot loader, twrp and superuser? (My sister have the same MOTO G model, and her's isn't rooted, therefore the update went smooth) I have a Mac by the way.
Thanks a lot, I hope I can solve this annoying problem. I couldn't find any way to totally restore the Moto G XT1032 to the stock firmware.
Andreas Holt
You should flash back to stock using fastboot commands. Update all Motorola apps, and get the OTA update.
audit13 said:
You should flash back to stock using fastboot commands. Update all Motorola apps, and get the OTA update.
Click to expand...
Click to collapse
It's like 5 months ago I rooted my Moto G. and when I paste in a fastboot command it says: "fastboot command not found"
My Moto G is now stuck in a bootloop - I need to fix this :/
Do you have the proper dirves and mfastboot or fastboot files on your computer? Are you using Win7?
Hai
I unlocked my Moto G (XT1033 with Lollipop ) bootloader and Installed TWRP recovery and everything was smooth until I tried for a Nandroid backup (the storage space was little low).
After the backup i tried for the reboot my moto just showing bootloader unlocked warning only.i tried fast boot using the power key +volume down key it shows the AP Fastboot flash Mode (s). Recovery option shows team win logo for 3-4 seconds and then the unlocked bootloader message and loops.only barcode option works.
then i dig through XDA Forum n tried custom recovery using ADB and fastboot tool.
installed moto usb drivers and tried to connect using usb cable as my device in fastboot flash mode my win 10 detects my phone as fastboot falcon s .but when i tried adb/fast boot commands it just shows waiting for device or null no device detected .
what should i do .please help ..
my local serviceman says after seeking motorola forum support(as he said) IC may be damaged.
if like that motherboard changing will be the only option ihave left??
I did before like you with twrp 2.8.6. just reinstall stock firmware by fastboot n then re-root again. Now i use twrp 2.8.7. I hope its fine to make nandroid backup then 2.8.6
Sent from my Moto G using Tapatalk
meitaro said:
I did before like you with twrp 2.8.6. just reinstall stock firmware by fastboot n then re-root again. Now i use twrp 2.8.7. I hope its fine to make nandroid backup then 2.8.6
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
in my case fastboot doesnt work
Hello, I'm facing a strange issue.
I just wanted to restore my device (unlocked, rooted, stock rom) to stock, to reroot etc
flashed everything in fastboot mode as usual.
but after I flashed everything, and everytime I boot my device, it goes stright to bootloader, with a diferent message
AP FASTBOOT FLASH MODE (SECURE)
BL :80.CB (SOME NUMBERS)
BASEBAND: NOT FOUND
SERIAOL NUMBER...
...
CONSOLE [NULL] : NULL
Click to expand...
Click to collapse
I tried reflashing everything, but this message keep showing up when the device is booted.
PS: when I hit start on bootloader, it boots normaly...
anyone has faced this or something relatred? thank you folks
Do a factory reset(not from The recovery, do that in the bootloader selecting an option called "factory")
Enviado desde mi Moto G mediante Tapatalk
hello
i've bought used moto g 2015 from spain.
the problem is that the device is locked with status code 0.
i've been trying to unlock it, but with no luck.
everything gives the error failed(remote failure)
recently i've used windroid toolkit to unlock bootloader and install twrp like in some tutorials, the app says it's done, but after i enter a recovery the phone hangs and boots again to fastboot.
any help will be appreciated
EDIT:
invoking "mfastboot flash partition gpt.bin" command gives the error too so i am unable of installing stock firmware too
EDIT2:
i've successfully installed stock package but there is still a problem - boot loop.
you need to flash stock rom to remove boot loop.
here is the link
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
sachin09 said:
you need to flash stock rom to remove boot loop.
here is the link
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Click to expand...
Click to collapse
I have already flashed the rom but now i think it could be a bad package. My phone is from spain and i installed before:
XT1541_OSPREY_ORAES_6.0_MPI24.65-33_cid7_subsidy-DEFAULT_CFC.xml
now i'm downloading
XT1541_OSPREY_RETES_6.0_MPI24.65-33_cid7_subsidy-DEFAULT_CFC.xml.zip
is there any way to find out which package should i use for sure?
the last package i mentioned doesnt change anything. phone boots to bootloader not to system.
any news i have the same thing with my device everything was flashed but i get boot faillure ??
nothing... i'll get my money back i guess