Database Info

[HOW TO] Samsung Galaxy S I9070 Advance Official XXLE2

Though Samsung Galaxy S Advance I9070 Ships With Gingerbread 2.3.6 As Default OS, You Can Flash This Firmware Update of XXLE2
Essential Steps Before Updating Firmware you will lose your date and setings!!
Disclaimer: I'm not responsible for anything that goes wrong. (though it may not happen )
- You Must Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging)
- Your Device Must be Charged up to 70% or Above Battery Level to Ensure that Your Device should not be Turned Off During this Process
- It will be Recommended to Temporary Disable Security Tools as well as Antivirus Installed on your Computer as This might Interrupt the process
- instal samsung usb drivers http://forum.xda-developers.com/showthread.php?t=1655286
Read the above and here you go
1. download this file http://www.hotfile.com/dl/161011459/22a62a3/I9070XXLE2_I9070OXXLD4_NEE.zip.html
2.download odin3 v1.85 www.samgalaxyseries.co.in/dl/Odin3_v1.85.zip
3. Extract Gingerbread 2.3.6 XXLE2 Package File.You’ll Find a file
4. ........XXLE2....tar.md5
5. Turn Off Your Phone & Now Enter Into The Downloading Mode.Downloading Mode Can Be Entered By Holding Power Button+Menu Button+Volume Down Button Simultaneously.
6. After Entering Your Phone Into The Downloading Mode, Connect Your Phone To The Computer.
7. Now Open Odin Multi Downloader Which You’ve Just Downloaded in Your Computer.By This Time ID:COM Section Should be Turned Yellow.If It isn’t Then You Need To Install Drivers in Your PC By Downloading Them.
8. Select PDA Tab & Then Choose “........XXLE2....tar.md5” File.
9. Initiate The Process By Pressing Start Button.
10. Wait Until Process Overs (Flashing Process Will Be Done Within 5-7 Minutes). As Soon As Process Done, You will See That The ID:COM Section is Turned Green With The Message “Pass”.
11. After Getting “Pass” Message, Disconnect Your Phone From The PC.
12. Again Switch Off Your Device.Now You Need To Enter Into The Recovery Mode.Recovery Can be Entered By Holding Menu Button+Power Button Simultaneously. (Note: In Recovery Mode, Touch Will Not Work, Therefore Use Volume Up & Down Keys And Menu Button Only.)
13. As Soon As You Enter Into The Recovery mode, Select Wipe Data/Factory Reset & Wipe Cache Partition.
14. Now Simply Reboot Your Device By Pressing “Reboot System Now”.
Cheers !! You’ve Successfully Updated Your Samsung Galaxy S Advance With Latest Official Gingerbread 2.3.6 XXLE2 Firmware Update
for root http://forum.xda-developers.com/showthread.php?t=1660419(by option 10. choose XXLE2)

Vote please
Vote for a tread for the Galaxy s advance http://forum.xda-developers.com/showthread.php?t=1660354

Thanks!
Sent from my GT-I9070 using xda app-developers app

Thanks

New download location
Hello guys,
I really need your help here...
Hotfile is no longer available for any download. And I really need this fiirmware as well as the samsung usb drivers.
Do you know any other location from where I can to download those files?
Thanks in advance,
Pedro

pedromoreira88 said:
Hello guys,
I really need your help here...
Hotfile is no longer available for any download. And I really need this fiirmware as well as the samsung usb drivers.
Do you know any other location from where I can to download those files?
Thanks in advance,
Pedro
Click to expand...
Click to collapse
http://samsung-updates.com/
USB drivers: http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows

Thanks, but I can't find the firmware for my region - XXLE2 - in this site...
Any other option?

pedromoreira88 said:
Thanks, but I can't find the firmware for my region - XXLE2 - in this site...
Any other option?
Click to expand...
Click to collapse
It is Gingerbread, you need gingerbread firmware?

shut_down said:
It is Gingerbread, you need gingerbread firmware?
Click to expand...
Click to collapse
Yes!!
I updated my phone to Jelly Bean and since then I am facing continuous crashes, screen blocks, resets...
So I want to downgrade the firmaware without lose the warranty.
Can you help?

pedromoreira88 said:
Yes!!
I updated my phone to Jelly Bean and since then I am facing continuous crashes, screen blocks, resets...
So I want to downgrade the firmaware without lose the warranty.
Can you help?
Click to expand...
Click to collapse
Did you do factory reset after upgrading to JB? If you did not, that might be cause of those problems.
http://terafile.co/56a926188932/I9070XXLE2_I9070OXXLD4_NEE.zip
From Sammobile.com. This is for Nordic countries, there is another one for Portugal. Let me know if this one is for your country.
P.S. For downgrading first use this guide http://forum.xda-developers.com/showthread.php?t=2195673 , and then flash your country firmware.

Jb 4.1.2 Problem.
Hepl !!!
I flash mobile on 2.3.6 Gingerbread with Odin and put 4.1.2 Jb but somthing is wrong. I can `t volumne up or down and missing Task manager.
When I go in Recovery I see this message:
E: failed to mount/efs (Invalid argument)
E: Can't mount /efs/log/boot_cause
What I do ? :crying:

fer14 said:
Hepl !!!
I flash mobile on 2.3.6 Gingerbread with Odin and put 4.1.2 Jb but somthing is wrong. I can `t volumne up or down and missing Task manager.
When I go in Recovery I see this message:
E: failed to mount/efs (Invalid argument)
E: Can't mount /efs/log/boot_cause
What I do ? :crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2417670
Try finding your answer there. Or search I9070 efs fix/problem.

tahnsk a a lottt

[ROOT] Samsung Galaxy Tab E - T561

Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me

hey tried this but flash failed. now i am stuck at boot logo
imfaraz said:
Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me
Click to expand...
Click to collapse

Any update?
Sent from my SM-T560NU using XDA Free mobile app

sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3300291

Sorry for being so late!
lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
What Model do you have there buddy?

- Install Kies3 from samsung.
- It will not recognize the device .... no panic!!!
- Open in menu Tools->Update and initialize firmware
* put the model number and serial number you have in the back of the tablet...
- It will download the proper original firmware from the samsung site and once done push on restore

sm-t561
Not work. F A I L !

bejinaru said:
Not work. F A I L !
Click to expand...
Click to collapse
Do it the proper way!
http://forum.xda-developers.com/showthread.php?t=3302935

How do I do it with out PC

I have the T561M Tablet.
Is there a ROM for android 6 or 7 for the T561M ??? At where???
Because I have ROOT and RECOVERY, but ROM is missing.
sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse

lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?

no root t561m
My T561m is with the December 2016 security update and I was not able to do root. Has anything changed? Any suggestion?

ciqvillanueva said:
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?
Click to expand...
Click to collapse
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,
after that connect your device to the computer, on your computer you'll see this.
then click "AP" and select the unzipped firmware you downloaded and click enter.
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.
Don't mind my gramatical mistakes. I hope this helped you.

Lunaworks2007427 said:
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
View attachment 5244307
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,View attachment 5244319
after that connect your device to the computer, on your computer you'll see this.
View attachment 5244321
then click "AP" and select the unzipped firmware you downloaded and click enter.
View attachment 5244311
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.View attachment 5244329
Don't mind my gramatical mistakes. I hope this helped you.
Click to expand...
Click to collapse
Unfortunately it did not work with rooting, did it as described above.
After the reboot, the tablet hangs at the start screen and does not boot any further.
how can I undo this, because before the device ran without problems

Hello everyone. I need help here.
I have a Samsung SM-T561 & some months ago, I upgraded to version 7.1
Then a few days ago, I wanted to upgrade it to version 10.
That's where things got messed up!
1st. I didn't make a backup of what current ROM.
2nd. I completely forgot to enable USB debugging (again, despite It wasn't the first time I used custom ROM)
3rd. The problem must have been from the ROMS I installed. They didn't work. So I factory resetted EVERYTHING. EVERYTHING. INCLUDING THE SYSTEM.
So basically, I HAD TWRP. I HAD NO OS. I DIDNT TURN ON USB DEBUGGING MODE.
Then I understood that I didn't need ODIN anymore because I had TWRP.
So.
I downloaded the files to flash again. On SD card. And inputted it inside . So it still DIDNT WORK!!
Then I flashed in IMAGE form.
Then my TWRP DISAPPEARED.
IM ON CONSTANT BOOTLOOP.
THE ONLY THING I CAN ACCESS IS THE DOWNLOAD MODE.
AND I CAN NOT CONNECT WITH ODIN BECAUSE I HAVENT TURNED ON USB debugging...
Someone should kindly... please. Get back to me

Rooting The SM J700M

Does anyone know the Easiest way yo Root Samsung Galaxy SM J700M?

Looking for that too.

You will need:
1 ° Have a PC
2 ° Have Odin3 updated
Now let's take the steps:
First, install the Samsung drivers, with the drivers installed correctly, the cell phone recognizing in the computer, connect in Download mode (Home+Volume+Power) and go to the second step.
Second, open the Odin click Options, check Auto Reboot and F. Reset Time, make sure that they are enabled.
Check AP and look in the Root folder for the CF-Auto-Root-j7ltechn-j7ltezm-smj7008.tar file.
Now start, and wait.
Done! Your Samsung Galaxy J7 is rooted.
CF-Auto-Root: https://download.chainfire.eu/825/CF-Root/CF-Auto-Root/CF-Auto-Root-j7elte-j7elteub-smj700m.zip
Note: I work on android 5.0 LP, but I've never tested it in 6.0

Grace, Mercy and Peace
GrayNinja33 said:
You will need:
1 ° Have a PC
2 ° Ter Odin3 updated
Now let's take the steps:
First, install the Samsung drivers, with the drivers installed correctly, the cell phone recognizing in the computer, connect in Download mode (Home + Volume - and Power) and go to the second step
Second, open the Odin click Options, check Auto Reboot and F. Reset Time.
Check AP and look in the Root folder for the CF-Auto-Root-j7ltechn-j7ltezm-smj7008.tar file.
Now start, and wait.
Ready your Samsung Galaxy J7 is routed.
CF-Auto-Root: https://download.chainfire.eu/825/CF-Root/CF-Auto-Root/CF-Auto-Root-j7elte-j7elteub-smj700m.zip
Note: I work on android 5.0 LP, but I've never tested it in 6.0
Click to expand...
Click to collapse
Thanks so much friend. it work like a charm. you mind if put instructions in Spanish?

tonymynd said:
Thanks so much friend. it work like a charm. you mind if put instructions in Spanish?
Click to expand...
Click to collapse
Do not work for mi do not start any news

help

samsung/hero2qlteusc/hero2qlteusc:7.0/NRD90M/G935R4TYU4BQE1:user/release-keys
SM-G935R4 us cellular s7 edge.
BootloaderG935R4TYU4BQE1
I'm sick of hearing all the exynos success. Can nobody root this version or what
All I need is one person to tell me how to do it

Taddow96 said:
samsung/hero2qlteusc/hero2qlteusc:7.0/NRD90M/G935R4TYU4BQE1:user/release-keys
SM-G935R4 us cellular s7 edge.
BootloaderG935R4TYU4BQE1
I'm sick of hearing all the exynos success. Can nobody root this version or what
All I need is one person to tell me how to do it
Click to expand...
Click to collapse
your device can already be rooted with cf-auto-root
select your firmware from link below then select cf-auto-root and follow instructions
https://desktop.firmware.mobi/device:459

TheFixItMan said:
your device can already be rooted with cf-auto-root
select your firmware from link below then select cf-auto-root and follow instructions
https://desktop.firmware.mobi/device:459
Click to expand...
Click to collapse
Could you elaborate? Because I tried all day and no success.

Taddow96 said:
Could you elaborate? Because I tried all day and no success.
Click to expand...
Click to collapse
I have generated a system install of supersu for you (see link at end of post)
It will wipe data if you are encrypted
Flash in odin
Enable usb debugging in dev options (if dev options not available in your phone settings menu goto about phone & keep pressing on build number until it says you're a developer)
Put phone in download mode
Connect to pc via USB cable
Press Vol up to start connection
Unzip the download zip file
Open odin from the tools folder
If connected you will have com then a number in a coloured box on top left
If it's not connected you must install the Samsung USB drivers (Google)
Select the ap section & put the img file from the image folder there
Begin the flash process
Your phone may reboot several times
If you have problems I suggest you post in the CF-Auto-Root support thread on xda as I don't own your device I can't test or offer anymore instructions
https://mega.nz/#!lsJFBD6Q!UbaY_aIazhC3ZvC_hgiqyXTo4eLwtHdkapma7LdGP88

Samsung s6 brick, S/N number

Hi, this is my first post on this forum. Thanks for helping me. I apologize if my english isnt the best.
I have this model: SM-G925W8. but im stuck in the blue screen that said that i have to use smartswitch to fix it. But in smartswitch, i need the S/N, and i dont have the box and my phone dont have it in the back. What can i do? Thanks for answers :good:

ItsAj said:
Hi, this is my first post on this forum. Thanks for helping me. I apologize if my english isnt the best.
I have this model: SM-G925W8. but im stuck in the blue screen that said that i have to use smartswitch to fix it. But in smartswitch, i need the S/N, and i dont have the box and my phone dont have it in the back. What can i do? Thanks for answers :good:
Click to expand...
Click to collapse
- Unzip SamFirm
- Copy all SamFirm's file in a new folder
- Launch SamFirm.exe
- Write the parameters like in the "picture 1"
- Unzip the the file SM-G925W8_1_20170825144427_9dzo3tq8md_fac.zip.enc4
- Install Odin and put the phone in downloading mode
- Put the file accordingly in Odin
- Flash

dinamo1975 said:
- Unzip SamFirm
- Copy all SamFirm's file in a new folder
- Launch SamFirm.exe
- Write the parameters like in the "picture 1"
- Unzip the the file SM-G925W8_1_20170825144427_9dzo3tq8md_fac.zip.enc4
- Install Odin and put the phone in downloading mode
- Put the file accordingly in Odin
- Flash
Click to expand...
Click to collapse
How i put the file "accordingly" in Odin? Do you have an example? Thanks
And what happen if something goes wrong? Like if odin tell me it falied?

ItsAj said:
Hi, this is my first post on this forum. Thanks for helping me. I apologize if my english isnt the best.
I have this model: SM-G925W8. but im stuck in the blue screen that said that i have to use smartswitch to fix it. But in smartswitch, i need the S/N, and i dont have the box and my phone dont have it in the back. What can i do? Thanks for answers :good:
Click to expand...
Click to collapse
You have to reinstall the correct firmware for your device.
Flashing Guide:
first download a correct firmware for model of your device(Go to setting>About phone>Model Number(it starts with SM) from www.updato.com or www.sammobile.com and then put it on you computer. then download ODIN PC version.
after downloading them charge your device over 60 percent and then conncect it to the pc.
then power off your device and hold Volume down + Home button + Power button together after that a page will be shown then Press Volume + to Confirm.
Run Odin and unzip the firmware that you have downloaded it(the file extension is .Tar) then click on AP on ODIN and select the firmware file wait for few minutes to file is being read.
Make sure that Auto Reboot is selected and Re-partiation is deselected then start the flashing after that you will get a message(Done with Green Color)
to asure your device has been inserted to ODIN the top of Odin color will be changed to Blue.
Be careful,Odin its a powerful software and if you dont know about flashing dont use it. It may cause to your device to be instable/.