This ROM is Migo G9199(a.k.a Avio Sen Pro One in Vietnam)'s ROM
Some info:
Chip/sOc: MT6577
Android version: 4.0.1
After bricking my phone, I realized that the auto ported TWRP can only WIPE but it can neither flash ROM nor restore anything. Luckily, I've backed up my device with flashtool . After a hour of Googling, I found out that many people out there have a bricked Sen Pro One(like me), and I think this might help many people. :good: :highfive:
Drivers, flash tool, firmware(of course) are included in the ROM.rar
200MB? too light-weigh huh? don't worry, It's pure stock ROM. I compressed it with "best" mode of winRAR :laugh:
Download: drive.google.com/open?id=0B0v16ifT9YcWdFRKZkZmd3d4WHc
btw: I'm new comer, if you want to help me with the recovery please reply. This device hasn't had a stable custom recovery yet.
Related
Hi guys
I've rooted a Ouku Horizon (P801W) and make a backup with Titaniun Backup Pro to my SDcard of all System and User apps and data.
I wanted to flash a new rom so I get Rom Manager and to backup my current rom (just in case) I installed the flash ClockWorkMod recovery ( I supose that was the first mistake, as I did not get from the list of phones my P801W I install another one)
Then I did "Backup Current Rom" and when the phone reboots it took forever freeze at booting in Ouku logo over black screen.
I soud backup the rom manualy but I didn't
Now I won a brick? or is recoverble?
hard reset (home buton + sound down + Power on) don't get me in to recover mode just no mather what I do it freeze at boot Orku logo.
Please help!!!!
can Odin software be a solution to flash the original or other rom again to the phone?
thanks guys
Yes odin should fix the problem just download original firmware and flash it with odin. Sorry usually i find the tut but now dont have much time.
thanks suki
I'll give it a try
does any one know how to put a Orku Horizon in download mode?
I tried all combinations of butons that I think of and no luck...
any insight?
I supose that Odin is a solution to my nerly bricket phone.
I should flash a recovery or a new compatible rom(?)
unfortunately from Ouku manufactory I can't get any kind of realy technical answer.
so I dont know how to proced with Odin...
my specs are:
Model number - P801W
Android 2.2.2
baseband version iris_p800 v1.20
Kernel 2.3.35.7perf.
[email protected]#3
Build nº FRG83G
software version Iris-p801W_v.21
Hardware version Iris_MP
any insight???????
pls
If you want an official rom just flash the rom using odin.
And for custom roms flash first CWM recovery, and then the rom you like.
I don't mind to put a custom rom in it, unfortunately I don't have any idea wich Rom to use.
If I put Cyanogenmod or Miui and if it is incompatible with Ouku Horizon android phone dont I brick it definitively?
does those custom roms support dual sim?
another thing is that I suppose I bricked my phone when I install a non specific CWM to Orku Horizon (P801W) through Rom Manager
because when it ask for the phone model mine wasn't listed so I chose a model that I tough was a generic...
(what a dumb ass!!!)
thanks a lot for your help Suky08
ROM for OUKU P801W
You can download the firmware for OUKU P801W on: Forum.China-iPhone.Ru
envenenador, have you tried the last tip?
how did it go?
and how did you manage to boot your phone. superclickone keeps on not working.
same with universal androot...
Hi guys
It´s my frist post but, I read this forum dialy (I have N7000, P6810 and i9300)
I have experience with SGSII and SGSIII with root and install much ROMs and kernels, modems...
My new Note N7000 (I buy late ) It´s to use in my business, I need one speed stock base ROM because default stock ROM It´s to slow...
This device is ICS 4.0.3 baseband XXLPT / kernel compilation XXLPY
I read in one post that It´s dangerous root or flashing this kernel version but not sure...
Can I flash my device normaly with I do in my SGSIII? (enter recovery, install CF-Root, install Mobile Odin Pro, copy an other ROM in ExtSDCard and finaly flash to recovery mode)
Thx
GoldFran1983 said:
Hi guys
It´s my frist post but, I read this forum dialy (I have N7000, P6810 and i9300)
I have experience with SGSII and SGSIII with root and install much ROMs and kernels, modems...
My new Note N7000 (I buy late ) It´s to use in my business, I need one speed stock base ROM because default stock ROM It´s to slow...
This device is ICS 4.0.3 baseband XXLPT / kernel compilation XXLPY
I read in one post that It´s dangerous root or flashing this kernel version but not sure...
Can I flash my device normaly with I do in my SGSIII? (enter recovery, install CF-Root, install Mobile Odin Pro, copy an other ROM in ExtSDCard and finaly flash to recovery mode)
Thx
Click to expand...
Click to collapse
See here and other links here.
Theonew said:
See here and other links here.
Click to expand...
Click to collapse
Good! I have an OSX OS and is beautyful for me, use a recovery rooted without PC.
first I use: Rooting with stock recovery Phil3759 PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip (My stock ROM XXLPY). This metoth install root + safe kernel, right?
Them, I install Mobile odin pro tu install for example Crach ROM v10.1
Only caution with no wipes with stock kernel I supose... When I install PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip, I can to wipes and install any ROMs safely
this package uninistall yellow triangle?
GoldFran1983 said:
Good! I have an OSX OS and is beautyful for me, use a recovery rooted without PC.
first I use: Rooting with stock recovery Phil3759 PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip (My stock ROM XXLPY). This metoth install root + safe kernel, right?
Them, I install Mobile odin pro tu install for example Crach ROM v10.1
Only caution with no wipes with stock kernel I supose... When I install PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip, I can to wipes and install any ROMs safely
this package uninistall yellow triangle?
Click to expand...
Click to collapse
Just follow the instructions and all will go well. You should take the discussion there for further assistance .
Hey.
I have a 4.1.2 running android phone Brand WANLTON PRIMO X1. Recently i have rooted and installed TWRP recovery mode, I was looking for a 4.2 update & installed a custom ROM as it stated 4.2 but it is was the same 4.1.2 modded ROM with some bugs, Unfortunately when I flashed the ROM I did not keep any backup but now I so badly want to go back to my original ROM. the link image attached
I have tried to do this according to instruction but it can't detect my phone when connected with USB.
Plz Plz provide me solution for this issue, I will be very very grateful to you.
Thanks in advance.
apparently tiveloru
ajoy25 said:
Hey.
I have a 4.1.2 running android phone Brand WANLTON PRIMO X1. Recently i have rooted and installed TWRP recovery mode, I was looking for a 4.2 update & installed a custom ROM as it stated 4.2 but it is was the same 4.1.2 modded ROM with some bugs, Unfortunately when I flashed the ROM I did not keep any backup but now I so badly want to go back to my original ROM. the link image attached
I have tried to do this according to instruction but it can't detect my phone when connected with USB.
Plz Plz provide me solution for this issue, I will be very very grateful to you.
Thanks in advance.
Click to expand...
Click to collapse
Download the original firmware and put your phone into recovery, then use odin to install the original firmware back into your phone. There are videos of how to install the original firmware using odin. Good luck, hope it helps...
hi, all xda members.
i am newbie for android world.
I am trying to making a new costom rom for my beloved device redmi 2. Currently running Miui6 rooted with bootloader unlocked.
i wanna know that where can i find recovery in my android. ?
i am very curious to know that when i flash a new rom it don't wipe my recovery even all things wiped but recovery doesn't. So i want to know why ?
where the recovery situated in android so that it can't wipe while flashing a new rom. ?
hope u will help.
Thank you all.
Hello..
I think ist better for you to install a custom recovery frist
after that you can make a nandroid backup using the custom recovery...this is important..because you will messed up..it will event android guru messed up their device once a whaile..
after you have the nandroid backup..you can flash any custom ROM for your devices..to find a devices please use the search bar at the top..
after you gain enough knowlage to build a custom ROM you can compile it for your devices..but for starter I highly recommend you to use any custom ROM for your device first
cherees
Thanks for your reply brother.
Good afternoon, please ask for help for my tablet that has become a paperweight, I would need firmware Tablet Mediatek ZH960 MT6582V V3.1 Ven000p
thanks for who can help.
[email protected]
Did you find any stock rom for vEN000P? any luck with that? can you share it to me or pm? because I have the same as yours but the board version is v4.1. And I need a stock rom because I bricked mine. Thank you.
no I did not find the right one, try many, but without success
Jlinksz ZH960 official flashtool firmware (flash file)
This Jlinksz ZH960 factory firmware (stock ROM) can help you easily un-brick or restore your device to its default or factory state. If you previously rooted or modified the system (or other) partition of the tablet in any way, flashing this stock ROM will overwrite all existing modified system...
www.leakite.com
HIi .... there I just found something in yuotube chanel
in description
there are have link for firmware zh960 ..I hope usefull
.