[PROJECT] Custom Vinyl Skin for Nexus 6P Case - Nexus 6P Accessories

Over the past few months I have been looking for a way to keep my 6P safe while looking decent at the same time.
I initially purchased the spigen ruggedarmour for the phone, and while it offers great protection, it looks pretty ugly with the exception of two carbon fibre strips. It shows none of the 6P's brushed metal back and is dull.
I looked at the clear cases but they seem quite tacky, and the dbrand skins offer no actual protection as they are applied to the phone itself (no case).
I wanted the protection of the spigen with the appearance of the 6P raw, so I decided to apply some vinyl wrap to the spigen case. There are no pre-cut vinyls (like dbrand ones) to apply to cases, so I figured I'd make my own.
I bought some brushed metal style vinyl wrap (made for cars) off eBay, and then applied this direct to the spigen case. A few cuts with a penknife along the edges and some wrapping with the aid of a hairdryer (loosens the vinyl) and the end result is actually pretty decent. A bit more smoothing might be needed and I might lift and re-apply the vinyl to get out a dust spot underneath, but I'm happy and the brushed metal looks good with the carbon fibre bits.
Images attached, without flash, under flash, in hand.

That looks dope!

​
Prattham said:
That looks dope!
Click to expand...
Click to collapse
Thanks... watch out dbrand a new player on the block!

I actually did the same thing but with the dbrand skin applied directly on top of the Spigen Rugged Armor (which is neither "rugged" nor an "armor"). I initially used their mahogany skin, but now I'm thinking of buying more of their cases in order to mess around with more dbrand skins. I have 3 more on the way, with dbrand's copper, brushed titanium and carbon fiber skin on the way.

Wow, I wouldn't have thought they would have fitted so well! The dbrand ones are definitely a lot cleaner although I am not sure if I can warrant paying for them + shipping to the UK... ��

phoenixsilver said:
Wow, I wouldn't have thought they would have fitted so well! The dbrand ones are definitely a lot cleaner although I am not sure if I can warrant paying for them + shipping to the UK... ��
Click to expand...
Click to collapse
They fit perfectly actually! The dbrand skin fits the Spigen Rugged and the Spigen SlimFit, as long as you apply it properly and have a decent heat gun nearby. PM me if you need more info.

ttminh1997 said:
They fit perfectly actually! The dbrand skin fits the Spigen Rugged and the Spigen SlimFit, as long as you apply it properly and have a decent heat gun nearby. PM me if you need more info.
Click to expand...
Click to collapse
Hi man! Finally my dbrand arrived, its perfect!!
Enviado desde mi Nexus 6P mediante Tapatalk

http://forum.xda-developers.com/showthread.php?p=65003571
Been there, done that! ? j/k
Seriously though, kudos to the OP for being so creative but the dbrand do fit the Rugged Armor surprisingly well. And I think dbrand have a sale right now.

Related

Let's See those sexy case's for your s6 plus

Got mines today at best buy it's called the platinum also come with a holster and fits really good.
Still didn't find any cover for my edge plus will post a pic once i have one
أرسلت من SM-G928C بإستخدام تاباتلك
I really want a clear one that shows off the phones back. And quick! This thing is slippery!
mr pnut said:
Got mines today at best buy it's called the platinum also come with a holster and fits really good.
Click to expand...
Click to collapse
Straight outta Compton, nice case dude had to say it though LoL
Verus hybrid case the best and only case you will need guys?

			
				
blaxican25 said:
Verus hybrid case the best and only case you will need guys?
Click to expand...
Click to collapse
Nice! How close would you say that gold from the outside of the case matches the gold on the phone?
The color is off buy a little but not noticeable because the the black rubber seperates the two, this case is a good case got is for $6 bucks with coupon code
http://slickdeals.net/f/8044059-pri...erus-usa-via-amazon?page=1&rp=2&rpid=77689857
Speck
Speck candyshell from best buy.
blaxican25 said:
The color is off buy a little but not noticeable because the the black rubber seperates the two, this case is a good case got is for $6 bucks with coupon code
http://slickdeals.net/f/8044059-pri...erus-usa-via-amazon?page=1&rp=2&rpid=77689857
Click to expand...
Click to collapse
Awesome thanks! Can't beat $6!
Had to get something
I've got this cheaply made, poorly designed, clear tpu case from best buy.
I had the same case but returned it because of the way the back looked. I will probably return the speck candy she'll also because it doesn't sit flat on the table.
Spigen Neo Hybrid Gunmetal
How do you like the neo hybrid. I ordered the same one. Is the rubber really soft or is it a firm rubber that won't really stick in your pocket?
Intub8 said:
How do you like the neo hybrid. I ordered the same one. Is the rubber really soft or is it a firm rubber that won't really stick in your pocket?
Click to expand...
Click to collapse
So far, I love it. The rubber is a firm. The case just feels and looks high quality.
I picked up this case from amazon today
Galaxy S6 Edge Plus Case, Spigen® [Thin Fit] Exact-Fit [Black] Premium Matte Finish Hard Case for Galaxy S6 Edge+
http://www.amazon.com/Galaxy-Spigen®-Exact-Fit-Premium-Finish/dp/B010MWDDF4
God I was hoping iwouldbt see this. You do realize when you say "sexy" in reference to a phone case it immediatelymakes me think of glasses and a pocket protector right? How about cases are not sexy....ugh
This is the Black Otter Box Symmetry
Dont really like it. The power button is sort of hard to press, and the bottom ports are not covered.
However it does fit snug, and feels good in the hand. Edge screens are fully in view, and easy to access.
I'm waiting for the clear case to arrive next week. The only way to show off its attractive, premium design.
One of the BEST cases (maybe it is actually the best)
After shopping around almost all day yesterday and checking out a lot of cases I have
found that only one case meets my requirements.
I wanted good protection but did not want the case to look like it's made for a war zone!
The other cases were either flimsy, hardly any real protection and some of them were not precision enough
to allow the usb cable to plug into the phone easily without having to wiggle/jiggle the usb cable connector.
Also I did not want to get a two piece case which adds a lot of bulk without adding a lot of extra protection.
So finally I found this Otter Semmetery case which alleviated all my concerns. ($49.95)
This Otter case does not interfere with the phone's Edge panel at all, not even
slighty. (which was not the case when checking out a lot of the other cases.)
It's a one piece case but it is a lot sturdier than any of the two piece cases I checked out.
The material it's made out of is not the easily bendable TPU but it's no where near as stiff
as the hard plastic cases. It's somewhere around half as flexible when compared to the TPU.
Another plus is that the inside of the case feels like it has a soft rubber coating.
Here are some pictures of the case:
Have a great day!

What case do you use on Nexus 6P?

Hey guys. I just decided to try Nexus 6P. Looking for some great cases to protect it! But also I don't wanna spoil the original look of it since the design's so unique and beautiful!Just got two clear cases for my former Nexus 6 from AMZ and looks wonderful, yet the clear case get darken yellowed after few weeks using, so just share your N6P case experience here and enjoy!
Long response incoming:
I initially bought a official microfibre Adopted case (in carbon) from Google along with my N6P (aluminium). I paid full price for it, but I thought it was worth the premium for an official case and the design was cool and unique. Massively underwhelmed when I received it, because it's nothing more than a generic TPU case with a thin "sticker" of microfibre on the back, which I sensed would be prone to staining and, over time, peeling. The fit was also really tight and button presses weren't that responsive. I decided in the end that the Nexus branding wasn't worth the premium, so I returned it.
I then ordered a charcoal Diztronic case. I've had good experiences with Diztronic in the past, having used their case on my Galaxy Nexus as a daily driver. It was cheaper than the Spigen Rugged Armor and I appreciated the minimalist aesthetic, not being a fan of the faux carbon fibre pattern on the Spigen. The fit and finish was great, and the buttons were clicky and responsive. My only minor niggle was the cutout for the camera sensor wasn't completely accurate, as it cut off part of the circle surrounding the sensor (100% an aesthetic oversight with no impact on function).
I then bought a Speck Candyshell Grip (in white) during the Black Friday sale, when it was 50% off. Definitely my favourite case of the three I've tested so far. It provides the most protection (being a dual-layer silicone and polycarbonate hybrid), looks striking, and, as the name implies, provides a ton of grip.
I've had a Speck Candyshell on my iPod touch and over 4 years later, it's still kept my iPod in perfect condition. The case itself is scratched up and turned a bit off-white, but I haven't exactly been gentle with it (having taken it traveling and camping) so I'm confident in its protective capabilities.
I'll likely be rocking the Speck case as my daily driver for the time being, and I'll only swap back to the Diztronic when I want a more toned-down look and slimmer profile (maybe if I'm at a fancy event wearing slacks).
Finally, I also pre-ordered a white Crash Guard + Project S from Evolutive Labs when they offered 25% off the first 50 pre-orders. IMO this would be the solution to preserving the Nexus's original design and aesthetics, while still providing a lot of protection (if the demo videos are any indication). I have no idea what Project S is, though (hopefully some kind of transparent skin, though they said it wasn't going to be made of the same material as the Rhino Shield).
I have a tempered glass screen protector from intelliARMOR protecting the front (second generation/first revision, the model prior to production of the two distinct "case-friendly" and "edge to edge" versions). It's been fine with both the Diztronic and Speck cases, though I'm curious as to whether the edge-to-edge versions might also be compatible with the Speck and Crash Guard, as there's just 1 mm between the edges of the cases and screen protector, where I find dust and grease can get trapped in between.
If you're looking for clear cases, there're Spigen's Ultra Hybrid and Neo Hybrid EX cases. The Ultra Hybrid is a single-layer case with a clear polycarbonate back framed by TPU along the edges. I wouldn't recommend it personally because I've heard that clear TPU will stain over time (as likely what happened to your original case), and the visor is completely exposed and thus prone to scratches.
The Neo Hybrid EX consists of 2 pieces: a clear TPU shell and a coloured polycarbonate bumper (essentially, the reverse of the Ultra Hybrid). It looks to be the best clear case I've seen in terms of protection (as the visor is actually covered), but I don't know how the clear TPU will fare over time, whether it will also be prone to staining. I'd wait on reviews for this case before ordering, and for it to be listed on Spigen's Amazon store, which will likely be cheaper than buying it off their main website or eBay store.
To be honest it's the first device that I don't have a case for it although I have a tampered glass and a pouch. But I'm waiting for some skins from dbrand and a wooden skin from toastmade.
Tapatalked with my Nexus 6P
I got the carbon cloth backed Nexus 6P case originally and I really like the look and feel of it, but it's not the most protective. The only issue I've had with it is taking screenshots (the case presses buttons you don't mean to) and it wouldn't work with a tempered glass screen protector (it peels it up).
On the black Friday I got the Speck CandyShell in black/slate and I'm digging it. It's more protective and it makes the button presses a little harder, which I like. I would think it'd work with a glass screen protector as the bezels don't intrude onto the glass very much.
I use a Supcase Unicorn Beetle Hybrid as my standard case. I usually slide it in my pants or jacket pocket. I do wish there was a belt clip for the Beetle Hybrid, but to get a belt clip case combo you typically are into something much thicker and substantial that is, for me, unnecessary. When I'm wearing a suit, I use it bare and carry it in a Story Leather belt clip holster made for the iPhone 6s Plus. The phone has a Skinomi Tech Glass protector on it.
My experience mirrors LuckyDragan a little bit.
My first case was the microfiber case from the Google store. While it looked nice and the in hand feel was decent, I felt it cost way too much for what it was. I ended up returning it because when I pressed the edge of the case by the buttons it would change the volume. Not cool for a $35 case.
Next case is the reg. Adopted case. It's not bad. I really like the textured sides. It's also fairly narrow. Thing is, I paid $10 for it, at the reg. price of $20, I'm not sure if it's worth it. By the pics I've seen, I think it looks better than the Diztronic, especially the fingerprint cut out.
3rd case is the Spigen Rugged Armor. Except for the camera cut out (I don't like how it doesn't leave room for the blueish oval), I think it looks the best of all the cases I've tried so far. My nags are that It's all little wide and slippery. At $13.00?, it's a good buy.
4th case is the Speck Grip. My favorite so far. It's not as thin as the other cases but not bulky. The grip is awesome, no problem using the phone with one hand. At first glance, I didn't think it was the best looking case, but it's starting to grow on me. The protection and how it makes the phone so much easier to handle makes it a winner. @ $20 I paid during the Google store's sale, I think it's worth it. @ the reg. price of $40, idk.
If haven't yet, check out Pilz review thread, so much good info.
White Speck case as my daily driver.
I have tried the Diztronic one, while it does provide protection, did not like how loose the edges felt, definitely not as snug and stiff as my Diztronic Ultra that is on my GS6. It easily bent out edges for my taste, and thought of getting some debris that could scratch up the phone was bugging me somewhat. If you need a very minimalist, fingerprint resistant, and decent lip for screen protection, that is the case to have.
Also have the Supcase Unicorn Hybrid Ultra. great case, snug and firmer edges than the Diztronic one, but damn, is that case slippery. I have a habit of placing the phone on my car seat, and that thing just slides around like a hockey puck on ice when placed on its back. Placing it face down did help... still preferred it over the Diztronic.
But snagged the White Speck Candy Shell Grip case at 50% off, love it. Excellent grip, very tight and solid felling edges, does not slide when placed on a my car seat. Wished they offered a matt finish white version of this, since I am not a fan of shiny cases, but the black rubber lines offset it enough to be likable for me. Sporting the Orzly TGSP,with that case there is a minimal space between the glass and the edges of the case, nearly perfect sealed fit. Hoping the intelliglass ones are a bit more of an coverage so that it could have a near gapless glass to case seal, still waiting on receiving mine...
Currently have the Tudia case which is brill, but also got the Spigen rugged case coming.
Official microfiber case in carbon. No screenshot issues or button issues in general. I love the soft fabric feel. Feels more "welcoming" than the cold, hard plastic/TPU of other cases I've used. Regarding durability, I'm a little concerned, but only time will tell how the microfiber will hold up.
Smoked Ringke fusion is my case of choice, at least for now. I also have the Orzly flexicase and Spigen rugged armor. Don't really care for either of those.
Anyone want to trade a case for the spigen rugged armor? mint condition and hasn't been used other than trying it on once.
PuffinNugz said:
Smoked Ringke fusion is my case of choice, at least for now.
Click to expand...
Click to collapse
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
I use spigen rugged armor, it's a good case that offers high protection to your phone..
i intend to order the verus high pro shield case though, just want to wait for some time until they fully supply the updated case.. the first batches had a defect about the charging port..
InfestedAdam said:
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
Click to expand...
Click to collapse
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
PuffinNugz said:
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
Click to expand...
Click to collapse
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
InfestedAdam said:
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
Click to expand...
Click to collapse
Yeah, not sure about amazon, but I bought mine from that ebay link. Pretty sure they are the actual sellers.
The Spigen rugged arrived today and it is SOOOO much nicer than the Tudia one. Better fit and feels nicer and more secure.
Sent from my Nexus 6P using Tapatalk
I've had a few cases so far.
SR Tech - Typical TPU case. Decent protection. Cutouts were slightly off. Total fingerprint/oil magnet. Got real slippery after a week or so of use and required a wipe down. Did not interfere with my Pleson TGSP.
Spigen Rugged Armor - Soft touch finish felt really good in hand. Very good protection at the sacrifice of some added bulk. Cutouts were precise and buttons had a nice tactile feel. Soft touch got some smudges on it occasionally but not nearly as bad as the SR case. Did not interfere with my Pleson TGSP but it was really close.
Spigen Thin Fit - Very interesting finish on this case. Kinda felt like the back of the Nexus 6. Fingerprints weren't really a problem but oil/smudging was. Case snapped on snugly and provided good protection for the covered areas. Top and bottom of the phone were exposed. Did not interfere with my Pleson TGSP.
Nillkin Nature - This is my daily driver. Pretty much the same as the SR Tech, only about half the thickness. Cutouts are more precise and there is a cover for the Type C port, which I really like. This is literally the thinnest case I've ever used and it really helps make the already large 6P more manageable in the hand. I wish it came in a matte finish so oil/fingerprints weren't so much of an issue, but other than that I'm happy.
Adopted for now until bumpers start arriving and be reviewed.
Ringke smoke and Google Microfiber. Like both and switch weekely
Sent from my Nexus 6P using Tapatalk
I switch from the official google carbon case and spigen ultra hybrid. They are great cases but the buttons on both aren't the best. I also have speck case but I use it for when I go to the gym. Diztronic case is nice but phone feels loose inside and verus case.. Its whatever.
Sent from my Nexus 6 using Tapatalk

How many cases do you have for your 6p?

Just wondering how many cases people have for their 6p and which ones they rock on a daily basis. How many is too much ?
Have 3 at the moment but thinking of sending the neo hybrid ex back as I also have a speck candyshell grip and a supcase unicorn hybrid slim. I am thinking of picking up a leather sleeve or nice folio or perhaps a supcase pro which I had for my G3 and it kept that phone in pristine condition.
abs406 said:
Just wondering how many cases people have for their 6p and which ones they rock on a daily basis. How many is too much ?
Have 3 at the moment but thinking of sending the neo hybrid ex back as I also have a speck candyshell grip and a supcase unicorn hybrid slim. I am thinking of picking up a leather sleeve or nice folio or perhaps a supcase pro which I had for my G3 and it kept that phone in pristine condition.
Click to expand...
Click to collapse
2 cases and 3 skins.
Sent from my Nexus 6P using Tapatalk
I have 5.
Nillkin Nature in clear and smoke
Spigen Rugged Armor
Spigen Ultra Hybrid
Spigen Thin Fit
Usually rotate between my smoke Nature, Ultra Hybrid and Thin Fit.
Sent from my Nexus 6P using Tapatalk
I have 2, and use neither. Just have an intelliARMOR Pro TGSP.
I just have Google's one, which I like, but this phone feels much nicer when naked... I put the case on during outdoor sports and other "risky" activities only
Spigen Rigged Armor and Spigen Ultra Hybrid. I'm rockin the Ultra Hybrid because it's clear and I have a dbrand black carbon fiber skin on it.
AndrasLOHF said:
I have 2, and use neither. Just have an intelliARMOR Pro TGSP.
Click to expand...
Click to collapse
I have one of these for mine also. Looks super nice and their customer service is fantastic.
pgptheoriginal said:
I just have Google's one, which I like, but this phone feels much nicer when naked... I put the case on during outdoor sports and other "risky" activities only
Click to expand...
Click to collapse
True, it feels nice naked, but I'm just so paranoid about dropping it without a case on lol. I've never been worried before as they have always been contract phones, and basically paying like £15-25 a month with your minutes and data. But this is the first one I have bought outright and simply because of the way it looks and its overall design and I actually like the camera hump at the back and think its one of the more unique looking designs out there. The fact that it is a beast in size and performance also helped sway the decision
ajsmsg78 said:
Spigen Rigged Armor and Spigen Ultra Hybrid. I'm rockin the Ultra Hybrid because it's clear and I have a dbrand black carbon fiber skin on it.
Click to expand...
Click to collapse
That looks real slick with the clear case. Have you experienced any drops with the Spigen cases and if so how did they hold up?
I currently rocking 4 cases which one was came free with the phone.
Too many.
Have 3, Adopted, Candyshell, and a Pouch.
abs406 said:
That looks real slick with the clear case. Have you experienced any drops with the Spigen cases and if so how did they hold up?
Click to expand...
Click to collapse
I haven't dropped the 6P yet but I dropped phones with the Spigen cases in the past and they always showed no signs of damage and they protect the phone very well. They are made to withstand impacts on the corners. They call it "air cushion technology."
SAL8116 said:
Too many.
Click to expand...
Click to collapse
I'm afraid this will be me soon lol. Looking at some handmade leather pouches which look fantastic but don't come cheap. 1 or 2 more and that's it lol
They sure do look good and if they hold up and protect the phone, then I might keep the neo hybrid. I just can't see myself using it anymore though, after having bought the candyshell, but I'll see how it goes.
If you don't mind, could you let me know what kind of pouch you're using? I looked at this one and it does look good:
http://mediadevil.com/us/artisanpouch-leather-pouch-case-google-nexus-6p.html
There's some nice ones on etsy too
At least 5 cases, 1 dbrand, extra charger and extra type c to type c cable and a type c car charger
I only have the Spigen Rugged Armor, which I believe is one of the best cases, however my cart is full of different covers, cases, Type-C cables about to be bought!!
thanya31 said:
I only have the Spigen Rugged Armor, which I believe is one of the best cases, however my cart is full of different covers, cases, Type-C cables about to be bought!!
Click to expand...
Click to collapse
Yeah I thought about getting the rugged armor and may still do in the future but for the time being I have sent the neo hybrix ex back. It's a really nice case and I liked the finish on it, but the side with the button started coming loose and left a bit of a gap (which seems to be a common issue from what I've read on this forum) and simply couldn't justify paying £16 for it to start doing that after 2 weeks use. The candyshell grip is the one I am rocking on a daily basis now and I have to say is an excellent case. I hear you about the accessories and covers in the shopping basket, I will be buying a leather folio and a leather pouch and a few more cables me thinks.
i just have the Supcase slim. Id recommend this case because it protected my nexus from a 5ft drop right on its back! But im looking for a good flip case!

Case vs Skin - what do you use?

Hey,
I'm curious what is your prefered protection. I'm currently using a case but I'm thinking about switching to a skin, maybe dbrand or a real wood one.
What do you use?
flopower1996 said:
Hey,
I'm curious what is your prefered protection. I'm currently using a case but I'm thinking about switching to a skin, maybe dbrand or a real wood one.
What do you use?
Click to expand...
Click to collapse
Thisphone is hard to hold naked so I run a case, ringke is my current daily. I'd love to run a skin but they simply aren't attractive with seems, plus I like being able to toss my phone around.
Have you seen the cruzerlite bugdroid cases? I have a red and a black one. However, due to the nature of the material in the semi opaque red one, it is more flexible and does not fit as well as the black one. So the black one stays on permanently.
zakiwashi said:
Have you seen the cruzerlite bugdroid cases? I have a red and a black one. However, due to the nature of the material in the semi opaque red one, it is more flexible and does not fit as well as the black one. So the black one stays on permanently.
Click to expand...
Click to collapse
Yeah I've seen them. They look not bad.
Currently using a silicon case, but planning on using skin sometime soon. Really want to feel the Z5C touch without any hindrance. Love the frosted glass finish on the back.
I wish there was a Diztronic TPU case for it. I've been using their brand for my previous Moto X, Nexus 6 and 5x and they're the best I've had so far. Minimalistic, durable and protective. Anyways for now I'm using a Orzly Semi transparent TPU case bought from Amazon, it's fairly decent compared to what's available, i wouldn't consider a skin on this device.
Sent from my E5823 using Tapatalk
I've been using the DevilCase aluminum bumper with a tempered glass protector. So far it's held up to all the drops and smacks I've given it. The bumper is visible worn and scratched but the phone itself still looks new.
I use a generic transparent silicone case that covers and provide a front raise.d protection the phone is slippery as hell without a case. I've dropped it several times getting inside and outside of the car during the first 2 months. It got some heavy scratches on the corners and also on the back from slipping it in and out of my front jean pockets. It loses some of it's appeal with the case but then again; I got a much better grip now and I can just drop it instead of 'gently' placing it on the table; and I do this like 100x a day.
pavlpavel said:
I've been using the DevilCase aluminum bumper with a tempered glass protector. So far it's held up to all the drops and smacks I've given it. The bumper is visible worn and scratched but the phone itself still looks new.
Click to expand...
Click to collapse
This is a really expencive case right?
flopower1996 said:
This is a really expencive case right?
Click to expand...
Click to collapse
It's around $50, not the most expensive of cases but more than the standard TPU and silicone ones.
I've used them on my last three phones and have always been happy with them. Their customer service is also tremendous.
Using a Ringke case for now. It came with a screen protector, but i'm not using it.
pavlpavel said:
It's around $50, not the most expensive of cases but more than the standard TPU and silicone ones.
I've used them on my last three phones and have always been happy with them. Their customer service is also tremendous.
Click to expand...
Click to collapse
Ah ok, I'm rocking an orzly case. Not bad either....
I always use TPU cases with my phones. I wish I didn't have to use a case, but your phone WILL eventually fall and hit the ground at some point, so you need protection. I prefer TPU because it's the perfect balance between polycarbonate and silicone. It is hard enough to feel robust and not stick to your pockets (pulling everything up along with your phone), and feels soft enough to absorb impacts. NEVER had a phone crack or dent with one of these. And they fall from hip height from time to time when I get out of the car. I dunno, some part of this is luck, but I trust these cases. They're simple, dirt cheap and efficient.
In addition to a glass scree protector on the front, I use a dbrand sticker on the back to increase grip and protect the glass from breaking or getting scratched.
Ringke Fusion for all my devices. Best protection, small footprint. Never looked back.
MatMew said:
Ringke Fusion for all my devices. Best protection, small footprint. Never looked back.
Click to expand...
Click to collapse
Ringke Fusion seems quite popular
interesting
Redneck Tetron. Dual layer protection and stand. I'm very satisfied.
I'm simply using a TPU cover bought for 5 euro and saved my phone already 3 times. It's perfectly fitting the size and doesn't add extra weight or size to the phone itself.
I'm using it combined with a tempered glass.
FYI something like this: https://i.ytimg.com/vi/9CSjnj2gSms/maxresdefault.jpg
Only orzly
ALL users of z5 tried few china tpu cases, but that one is awesome, I recommend 100%, phone looks elegant and like without case ( with dark version). Moreover, it's matt and really nice in touch :good::good::good: youtube.com/ watch?v=GtxgfKDej-E im not a producer, just happy user
I agree, I'd use the phone naked but its too slippary. All I really want is a bumper but no one has any.
Therefore, I just got a black TPU case and cut out the back to make it into a bumper. The cut could have been cleaner but its been working for me.

Are there any "grippy" cases out there yet?

I am coming from a Pixel 2XL and I was using a Pitaka carbon fiber case for the past year. That was one of the best cases I have ever used. The carbon fiber seemed to have a grippy or rubber coating over the case and I never dropped that thing. The TPU cases that claim to have grip are still nothing like what the Pitaka case had. I have reached out to Pitaka and it sounds like they won't be making a case for the Pixel anymore. Bummer.
If you're looking for a slim, non-tpu case check out the Spigen Thin Fit. I had one on my LG G7 and got one for my Pixel 4. No problems with grip and definitely better than a TPU or glossy plastic case that gets slippery when you're wet, sweating, or have greasy fingers or something.
Alcolawl said:
If you're looking for a slim, non-tpu case check out the Spigen Thin Fit. I had one on my LG G7 and got one for my Pixel 4. No problems with grip and definitely better than a TPU or glossy plastic case that gets slippery when you're wet, sweating, or have greasy fingers or something.
Click to expand...
Click to collapse
The grip on the thin fit is good, but beware that the edges stick up past the screen, and they're sharp. They make using gestures really annoying. I stopped using mine for that reason. They didn't think that one through for the Pixel 4.
21cdb said:
The grip on the thin fit is good, but beware that the edges stick up past the screen, and they're sharp. They make using gestures really annoying. I stopped using mine for that reason. They didn't think that one through for the Pixel 4.
Click to expand...
Click to collapse
Yeah, I haven't had that issue really, I don't use the gestures too often, but I can see where you're coming from. I'm hoping they release a Thin Fit 360 in the future, which would correct this issue entirely (at the expense of having a two-piece case design). I had it on my G7 and it was perfect. The only problems I see with that type of case now are they hug the outside of the screen just a tiny bit and tempered glass screen protectors can interfere with installation.
I'm using the black Speck Presidio Grip case. Very grippy, doesn't slide easily on slick surfaces, good drop protection, and not bulky at all.
jamesn2k said:
I'm using the black Speck Presidio Grip case. Very grippy, doesn't slide easily on slick surfaces, good drop protection, and not bulky at all.
Click to expand...
Click to collapse
Same here, it's a very nice case. I had the same on the S10 plus and Pixel 3XL and they were great as well. Can't really go wrong with it but it's a bit pricey compared to others.
knife2240 said:
Same here, it's a very nice case. I had the same on the S10 plus and Pixel 3XL and they were great as well. Can't really go wrong with it but it's a bit pricey compared to others.
Click to expand...
Click to collapse
They can be found cheaper on Amazon. Usually half the price from carrier stores
jamesn2k said:
They can be found cheaper on Amazon. Usually half the price from carrier stores
Click to expand...
Click to collapse
I just checked Amazon and they are the same price as local stores here. Give it a few months and yes Amazon will be cheaper but not today.
EFM Aspen Case
Check out the EFM Aspen Case. I've got it and it's super grippy. I've posted pics of it on another thread, but here's links for you:
https://myefm.com/case-armour/aspen/google-pixel-4-case-black
https://photos.app.goo.gl/s6NcZgQineGLQuYv9
Take a look at the imak TPU cases. They have a Metal Black (rubbery) and a rough texture one. I use the Metal Black one on my Pixel 1 and it has lasted almost 2 years. Good grip even for the non rough one, but has started to peel after 2 years. No biggie, it's $5.
It's on Aliexpress, I may try out the rough one this time as well when I get my 4.
RhinoShield Bumper Case preorders are up, just got mine...
eminem5055 said:
RhinoShield Bumper Case preorders are up, just got mine...
Click to expand...
Click to collapse
Any pics? How do you like it? About to place the order for one, didn't realize they already started shipping them out...
Sent from my Pixel 2 XL using Tapatalk
My Dbrand Grip case came in last week. I put a orange carbon fiber skin on the back so I could remember that I have the orange Pixel 4 XL. So far, so good. I haven't got anywhere near dropping it. I had the fabric case from Google before. It was a fine case but it attracted stains.
using moment photo case and yes the sides are grippy like the pixel 4's sides.
If I remember I'll report back when my Dbrand case arrives, it is literally called 'grip' but who knows if it is nicer than the Spigen armor with kickstand, it is quite grippy.
ESR cases are very grippy and also has a kickstand
I'm actually loving my moment case for the 4XL, the walnut wood really sets it off, the inside has soft suede like material to keep it from scratching. I used to have the pitaka on my 2XL and forced it on the 3XL, it was way slimmer. But I've come to accept a little extra bulk for protection and the ability to add lenses is really special, it actually transforms the ability of the already fantastic camera.
Anyone know of a case similar to the ones from smartish? The kung fu grip cases have a rough outer edge and have a grip to them that i like very much. Only for iphones though. Anything similar maybe?
I had purchased a case from the Google store with my phone since I was so pumped about it. It was 40 bucks that I never should have spent. Their case is a piece of molded cardboard wrapped in felt. There wasn't even any protection on the bottom. Not only that, but the case was really slippery; always felt like it was going to slide out of my hands.
So, I purchased a Spigen Tough Armor case from Amazon and could not be more pleased. It fits better (still not as grippy as I'd like) and feels much more durable.
Dbrand has sale running .. Grip case $15 ..
https://dbrand.com/shop/grip/google-pixel-4-xl-cases
Sent from my Pixel 4 XL using Tapatalk

Categories

Resources