I am coming from a Pixel 2XL and I was using a Pitaka carbon fiber case for the past year. That was one of the best cases I have ever used. The carbon fiber seemed to have a grippy or rubber coating over the case and I never dropped that thing. The TPU cases that claim to have grip are still nothing like what the Pitaka case had. I have reached out to Pitaka and it sounds like they won't be making a case for the Pixel anymore. Bummer.
If you're looking for a slim, non-tpu case check out the Spigen Thin Fit. I had one on my LG G7 and got one for my Pixel 4. No problems with grip and definitely better than a TPU or glossy plastic case that gets slippery when you're wet, sweating, or have greasy fingers or something.
Alcolawl said:
If you're looking for a slim, non-tpu case check out the Spigen Thin Fit. I had one on my LG G7 and got one for my Pixel 4. No problems with grip and definitely better than a TPU or glossy plastic case that gets slippery when you're wet, sweating, or have greasy fingers or something.
Click to expand...
Click to collapse
The grip on the thin fit is good, but beware that the edges stick up past the screen, and they're sharp. They make using gestures really annoying. I stopped using mine for that reason. They didn't think that one through for the Pixel 4.
21cdb said:
The grip on the thin fit is good, but beware that the edges stick up past the screen, and they're sharp. They make using gestures really annoying. I stopped using mine for that reason. They didn't think that one through for the Pixel 4.
Click to expand...
Click to collapse
Yeah, I haven't had that issue really, I don't use the gestures too often, but I can see where you're coming from. I'm hoping they release a Thin Fit 360 in the future, which would correct this issue entirely (at the expense of having a two-piece case design). I had it on my G7 and it was perfect. The only problems I see with that type of case now are they hug the outside of the screen just a tiny bit and tempered glass screen protectors can interfere with installation.
I'm using the black Speck Presidio Grip case. Very grippy, doesn't slide easily on slick surfaces, good drop protection, and not bulky at all.
jamesn2k said:
I'm using the black Speck Presidio Grip case. Very grippy, doesn't slide easily on slick surfaces, good drop protection, and not bulky at all.
Click to expand...
Click to collapse
Same here, it's a very nice case. I had the same on the S10 plus and Pixel 3XL and they were great as well. Can't really go wrong with it but it's a bit pricey compared to others.
knife2240 said:
Same here, it's a very nice case. I had the same on the S10 plus and Pixel 3XL and they were great as well. Can't really go wrong with it but it's a bit pricey compared to others.
Click to expand...
Click to collapse
They can be found cheaper on Amazon. Usually half the price from carrier stores
jamesn2k said:
They can be found cheaper on Amazon. Usually half the price from carrier stores
Click to expand...
Click to collapse
I just checked Amazon and they are the same price as local stores here. Give it a few months and yes Amazon will be cheaper but not today.
EFM Aspen Case
Check out the EFM Aspen Case. I've got it and it's super grippy. I've posted pics of it on another thread, but here's links for you:
https://myefm.com/case-armour/aspen/google-pixel-4-case-black
https://photos.app.goo.gl/s6NcZgQineGLQuYv9
Take a look at the imak TPU cases. They have a Metal Black (rubbery) and a rough texture one. I use the Metal Black one on my Pixel 1 and it has lasted almost 2 years. Good grip even for the non rough one, but has started to peel after 2 years. No biggie, it's $5.
It's on Aliexpress, I may try out the rough one this time as well when I get my 4.
RhinoShield Bumper Case preorders are up, just got mine...
eminem5055 said:
RhinoShield Bumper Case preorders are up, just got mine...
Click to expand...
Click to collapse
Any pics? How do you like it? About to place the order for one, didn't realize they already started shipping them out...
Sent from my Pixel 2 XL using Tapatalk
My Dbrand Grip case came in last week. I put a orange carbon fiber skin on the back so I could remember that I have the orange Pixel 4 XL. So far, so good. I haven't got anywhere near dropping it. I had the fabric case from Google before. It was a fine case but it attracted stains.
using moment photo case and yes the sides are grippy like the pixel 4's sides.
If I remember I'll report back when my Dbrand case arrives, it is literally called 'grip' but who knows if it is nicer than the Spigen armor with kickstand, it is quite grippy.
ESR cases are very grippy and also has a kickstand
I'm actually loving my moment case for the 4XL, the walnut wood really sets it off, the inside has soft suede like material to keep it from scratching. I used to have the pitaka on my 2XL and forced it on the 3XL, it was way slimmer. But I've come to accept a little extra bulk for protection and the ability to add lenses is really special, it actually transforms the ability of the already fantastic camera.
Anyone know of a case similar to the ones from smartish? The kung fu grip cases have a rough outer edge and have a grip to them that i like very much. Only for iphones though. Anything similar maybe?
I had purchased a case from the Google store with my phone since I was so pumped about it. It was 40 bucks that I never should have spent. Their case is a piece of molded cardboard wrapped in felt. There wasn't even any protection on the bottom. Not only that, but the case was really slippery; always felt like it was going to slide out of my hands.
So, I purchased a Spigen Tough Armor case from Amazon and could not be more pleased. It fits better (still not as grippy as I'd like) and feels much more durable.
Dbrand has sale running .. Grip case $15 ..
https://dbrand.com/shop/grip/google-pixel-4-xl-cases
Sent from my Pixel 4 XL using Tapatalk
Related
Hey guys. I just decided to try Nexus 6P. Looking for some great cases to protect it! But also I don't wanna spoil the original look of it since the design's so unique and beautiful!Just got two clear cases for my former Nexus 6 from AMZ and looks wonderful, yet the clear case get darken yellowed after few weeks using, so just share your N6P case experience here and enjoy!
Long response incoming:
I initially bought a official microfibre Adopted case (in carbon) from Google along with my N6P (aluminium). I paid full price for it, but I thought it was worth the premium for an official case and the design was cool and unique. Massively underwhelmed when I received it, because it's nothing more than a generic TPU case with a thin "sticker" of microfibre on the back, which I sensed would be prone to staining and, over time, peeling. The fit was also really tight and button presses weren't that responsive. I decided in the end that the Nexus branding wasn't worth the premium, so I returned it.
I then ordered a charcoal Diztronic case. I've had good experiences with Diztronic in the past, having used their case on my Galaxy Nexus as a daily driver. It was cheaper than the Spigen Rugged Armor and I appreciated the minimalist aesthetic, not being a fan of the faux carbon fibre pattern on the Spigen. The fit and finish was great, and the buttons were clicky and responsive. My only minor niggle was the cutout for the camera sensor wasn't completely accurate, as it cut off part of the circle surrounding the sensor (100% an aesthetic oversight with no impact on function).
I then bought a Speck Candyshell Grip (in white) during the Black Friday sale, when it was 50% off. Definitely my favourite case of the three I've tested so far. It provides the most protection (being a dual-layer silicone and polycarbonate hybrid), looks striking, and, as the name implies, provides a ton of grip.
I've had a Speck Candyshell on my iPod touch and over 4 years later, it's still kept my iPod in perfect condition. The case itself is scratched up and turned a bit off-white, but I haven't exactly been gentle with it (having taken it traveling and camping) so I'm confident in its protective capabilities.
I'll likely be rocking the Speck case as my daily driver for the time being, and I'll only swap back to the Diztronic when I want a more toned-down look and slimmer profile (maybe if I'm at a fancy event wearing slacks).
Finally, I also pre-ordered a white Crash Guard + Project S from Evolutive Labs when they offered 25% off the first 50 pre-orders. IMO this would be the solution to preserving the Nexus's original design and aesthetics, while still providing a lot of protection (if the demo videos are any indication). I have no idea what Project S is, though (hopefully some kind of transparent skin, though they said it wasn't going to be made of the same material as the Rhino Shield).
I have a tempered glass screen protector from intelliARMOR protecting the front (second generation/first revision, the model prior to production of the two distinct "case-friendly" and "edge to edge" versions). It's been fine with both the Diztronic and Speck cases, though I'm curious as to whether the edge-to-edge versions might also be compatible with the Speck and Crash Guard, as there's just 1 mm between the edges of the cases and screen protector, where I find dust and grease can get trapped in between.
If you're looking for clear cases, there're Spigen's Ultra Hybrid and Neo Hybrid EX cases. The Ultra Hybrid is a single-layer case with a clear polycarbonate back framed by TPU along the edges. I wouldn't recommend it personally because I've heard that clear TPU will stain over time (as likely what happened to your original case), and the visor is completely exposed and thus prone to scratches.
The Neo Hybrid EX consists of 2 pieces: a clear TPU shell and a coloured polycarbonate bumper (essentially, the reverse of the Ultra Hybrid). It looks to be the best clear case I've seen in terms of protection (as the visor is actually covered), but I don't know how the clear TPU will fare over time, whether it will also be prone to staining. I'd wait on reviews for this case before ordering, and for it to be listed on Spigen's Amazon store, which will likely be cheaper than buying it off their main website or eBay store.
To be honest it's the first device that I don't have a case for it although I have a tampered glass and a pouch. But I'm waiting for some skins from dbrand and a wooden skin from toastmade.
Tapatalked with my Nexus 6P
I got the carbon cloth backed Nexus 6P case originally and I really like the look and feel of it, but it's not the most protective. The only issue I've had with it is taking screenshots (the case presses buttons you don't mean to) and it wouldn't work with a tempered glass screen protector (it peels it up).
On the black Friday I got the Speck CandyShell in black/slate and I'm digging it. It's more protective and it makes the button presses a little harder, which I like. I would think it'd work with a glass screen protector as the bezels don't intrude onto the glass very much.
I use a Supcase Unicorn Beetle Hybrid as my standard case. I usually slide it in my pants or jacket pocket. I do wish there was a belt clip for the Beetle Hybrid, but to get a belt clip case combo you typically are into something much thicker and substantial that is, for me, unnecessary. When I'm wearing a suit, I use it bare and carry it in a Story Leather belt clip holster made for the iPhone 6s Plus. The phone has a Skinomi Tech Glass protector on it.
My experience mirrors LuckyDragan a little bit.
My first case was the microfiber case from the Google store. While it looked nice and the in hand feel was decent, I felt it cost way too much for what it was. I ended up returning it because when I pressed the edge of the case by the buttons it would change the volume. Not cool for a $35 case.
Next case is the reg. Adopted case. It's not bad. I really like the textured sides. It's also fairly narrow. Thing is, I paid $10 for it, at the reg. price of $20, I'm not sure if it's worth it. By the pics I've seen, I think it looks better than the Diztronic, especially the fingerprint cut out.
3rd case is the Spigen Rugged Armor. Except for the camera cut out (I don't like how it doesn't leave room for the blueish oval), I think it looks the best of all the cases I've tried so far. My nags are that It's all little wide and slippery. At $13.00?, it's a good buy.
4th case is the Speck Grip. My favorite so far. It's not as thin as the other cases but not bulky. The grip is awesome, no problem using the phone with one hand. At first glance, I didn't think it was the best looking case, but it's starting to grow on me. The protection and how it makes the phone so much easier to handle makes it a winner. @ $20 I paid during the Google store's sale, I think it's worth it. @ the reg. price of $40, idk.
If haven't yet, check out Pilz review thread, so much good info.
White Speck case as my daily driver.
I have tried the Diztronic one, while it does provide protection, did not like how loose the edges felt, definitely not as snug and stiff as my Diztronic Ultra that is on my GS6. It easily bent out edges for my taste, and thought of getting some debris that could scratch up the phone was bugging me somewhat. If you need a very minimalist, fingerprint resistant, and decent lip for screen protection, that is the case to have.
Also have the Supcase Unicorn Hybrid Ultra. great case, snug and firmer edges than the Diztronic one, but damn, is that case slippery. I have a habit of placing the phone on my car seat, and that thing just slides around like a hockey puck on ice when placed on its back. Placing it face down did help... still preferred it over the Diztronic.
But snagged the White Speck Candy Shell Grip case at 50% off, love it. Excellent grip, very tight and solid felling edges, does not slide when placed on a my car seat. Wished they offered a matt finish white version of this, since I am not a fan of shiny cases, but the black rubber lines offset it enough to be likable for me. Sporting the Orzly TGSP,with that case there is a minimal space between the glass and the edges of the case, nearly perfect sealed fit. Hoping the intelliglass ones are a bit more of an coverage so that it could have a near gapless glass to case seal, still waiting on receiving mine...
Currently have the Tudia case which is brill, but also got the Spigen rugged case coming.
Official microfiber case in carbon. No screenshot issues or button issues in general. I love the soft fabric feel. Feels more "welcoming" than the cold, hard plastic/TPU of other cases I've used. Regarding durability, I'm a little concerned, but only time will tell how the microfiber will hold up.
Smoked Ringke fusion is my case of choice, at least for now. I also have the Orzly flexicase and Spigen rugged armor. Don't really care for either of those.
Anyone want to trade a case for the spigen rugged armor? mint condition and hasn't been used other than trying it on once.
PuffinNugz said:
Smoked Ringke fusion is my case of choice, at least for now.
Click to expand...
Click to collapse
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
I use spigen rugged armor, it's a good case that offers high protection to your phone..
i intend to order the verus high pro shield case though, just want to wait for some time until they fully supply the updated case.. the first batches had a defect about the charging port..
InfestedAdam said:
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
Click to expand...
Click to collapse
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
PuffinNugz said:
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
Click to expand...
Click to collapse
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
InfestedAdam said:
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
Click to expand...
Click to collapse
Yeah, not sure about amazon, but I bought mine from that ebay link. Pretty sure they are the actual sellers.
The Spigen rugged arrived today and it is SOOOO much nicer than the Tudia one. Better fit and feels nicer and more secure.
Sent from my Nexus 6P using Tapatalk
I've had a few cases so far.
SR Tech - Typical TPU case. Decent protection. Cutouts were slightly off. Total fingerprint/oil magnet. Got real slippery after a week or so of use and required a wipe down. Did not interfere with my Pleson TGSP.
Spigen Rugged Armor - Soft touch finish felt really good in hand. Very good protection at the sacrifice of some added bulk. Cutouts were precise and buttons had a nice tactile feel. Soft touch got some smudges on it occasionally but not nearly as bad as the SR case. Did not interfere with my Pleson TGSP but it was really close.
Spigen Thin Fit - Very interesting finish on this case. Kinda felt like the back of the Nexus 6. Fingerprints weren't really a problem but oil/smudging was. Case snapped on snugly and provided good protection for the covered areas. Top and bottom of the phone were exposed. Did not interfere with my Pleson TGSP.
Nillkin Nature - This is my daily driver. Pretty much the same as the SR Tech, only about half the thickness. Cutouts are more precise and there is a cover for the Type C port, which I really like. This is literally the thinnest case I've ever used and it really helps make the already large 6P more manageable in the hand. I wish it came in a matte finish so oil/fingerprints weren't so much of an issue, but other than that I'm happy.
Adopted for now until bumpers start arriving and be reviewed.
Ringke smoke and Google Microfiber. Like both and switch weekely
Sent from my Nexus 6P using Tapatalk
I switch from the official google carbon case and spigen ultra hybrid. They are great cases but the buttons on both aren't the best. I also have speck case but I use it for when I go to the gym. Diztronic case is nice but phone feels loose inside and verus case.. Its whatever.
Sent from my Nexus 6 using Tapatalk
Hey,
I'm curious what is your prefered protection. I'm currently using a case but I'm thinking about switching to a skin, maybe dbrand or a real wood one.
What do you use?
flopower1996 said:
Hey,
I'm curious what is your prefered protection. I'm currently using a case but I'm thinking about switching to a skin, maybe dbrand or a real wood one.
What do you use?
Click to expand...
Click to collapse
Thisphone is hard to hold naked so I run a case, ringke is my current daily. I'd love to run a skin but they simply aren't attractive with seems, plus I like being able to toss my phone around.
Have you seen the cruzerlite bugdroid cases? I have a red and a black one. However, due to the nature of the material in the semi opaque red one, it is more flexible and does not fit as well as the black one. So the black one stays on permanently.
zakiwashi said:
Have you seen the cruzerlite bugdroid cases? I have a red and a black one. However, due to the nature of the material in the semi opaque red one, it is more flexible and does not fit as well as the black one. So the black one stays on permanently.
Click to expand...
Click to collapse
Yeah I've seen them. They look not bad.
Currently using a silicon case, but planning on using skin sometime soon. Really want to feel the Z5C touch without any hindrance. Love the frosted glass finish on the back.
I wish there was a Diztronic TPU case for it. I've been using their brand for my previous Moto X, Nexus 6 and 5x and they're the best I've had so far. Minimalistic, durable and protective. Anyways for now I'm using a Orzly Semi transparent TPU case bought from Amazon, it's fairly decent compared to what's available, i wouldn't consider a skin on this device.
Sent from my E5823 using Tapatalk
I've been using the DevilCase aluminum bumper with a tempered glass protector. So far it's held up to all the drops and smacks I've given it. The bumper is visible worn and scratched but the phone itself still looks new.
I use a generic transparent silicone case that covers and provide a front raise.d protection the phone is slippery as hell without a case. I've dropped it several times getting inside and outside of the car during the first 2 months. It got some heavy scratches on the corners and also on the back from slipping it in and out of my front jean pockets. It loses some of it's appeal with the case but then again; I got a much better grip now and I can just drop it instead of 'gently' placing it on the table; and I do this like 100x a day.
pavlpavel said:
I've been using the DevilCase aluminum bumper with a tempered glass protector. So far it's held up to all the drops and smacks I've given it. The bumper is visible worn and scratched but the phone itself still looks new.
Click to expand...
Click to collapse
This is a really expencive case right?
flopower1996 said:
This is a really expencive case right?
Click to expand...
Click to collapse
It's around $50, not the most expensive of cases but more than the standard TPU and silicone ones.
I've used them on my last three phones and have always been happy with them. Their customer service is also tremendous.
Using a Ringke case for now. It came with a screen protector, but i'm not using it.
pavlpavel said:
It's around $50, not the most expensive of cases but more than the standard TPU and silicone ones.
I've used them on my last three phones and have always been happy with them. Their customer service is also tremendous.
Click to expand...
Click to collapse
Ah ok, I'm rocking an orzly case. Not bad either....
I always use TPU cases with my phones. I wish I didn't have to use a case, but your phone WILL eventually fall and hit the ground at some point, so you need protection. I prefer TPU because it's the perfect balance between polycarbonate and silicone. It is hard enough to feel robust and not stick to your pockets (pulling everything up along with your phone), and feels soft enough to absorb impacts. NEVER had a phone crack or dent with one of these. And they fall from hip height from time to time when I get out of the car. I dunno, some part of this is luck, but I trust these cases. They're simple, dirt cheap and efficient.
In addition to a glass scree protector on the front, I use a dbrand sticker on the back to increase grip and protect the glass from breaking or getting scratched.
Ringke Fusion for all my devices. Best protection, small footprint. Never looked back.
MatMew said:
Ringke Fusion for all my devices. Best protection, small footprint. Never looked back.
Click to expand...
Click to collapse
Ringke Fusion seems quite popular
interesting
Redneck Tetron. Dual layer protection and stand. I'm very satisfied.
I'm simply using a TPU cover bought for 5 euro and saved my phone already 3 times. It's perfectly fitting the size and doesn't add extra weight or size to the phone itself.
I'm using it combined with a tempered glass.
FYI something like this: https://i.ytimg.com/vi/9CSjnj2gSms/maxresdefault.jpg
Only orzly
ALL users of z5 tried few china tpu cases, but that one is awesome, I recommend 100%, phone looks elegant and like without case ( with dark version). Moreover, it's matt and really nice in touch :good::good::good: youtube.com/ watch?v=GtxgfKDej-E im not a producer, just happy user
I agree, I'd use the phone naked but its too slippary. All I really want is a bumper but no one has any.
Therefore, I just got a black TPU case and cut out the back to make it into a bumper. The cut could have been cleaner but its been working for me.
Does anyone have input on the UAG cases? The Amazon ones are mixed and I don't want to burn $30.
i have the ash uag case for mine and my wife's pixel xl since the beginning of December.
was looking forward to this case. when i first got it i liked it alot, but then other people got theirs and made me start to look at mine again. the one issue is that the lip at the top and bottom seem to show a little bit too much metal. it's almost like as though they rushed the case. i thought the case from uag would have been similar to the uag case they did for the galaxy note 4, in how it wrapped the phone and you knew it was protected.
since getting my uag case i have ordered the presidio grip, didn't like it, not that much screen protection and that case felt lose on the phone.
ordered the seidio dilex, bigger case tab the uag in feel making the phone feel bulkier but the headphone jack cutout is too small, unless your headphones have a skinny plug. will be sending that one back.
received the vrs design high pro shield. same thing not that much lip on the screen and button feel was not that great.
was going to order the LifeProof fre but read people having flash issues at night with the case on. still thinking about giving the caseology case a try.
so after going through those cases determined the uag case will work and get the job done with a screen protector. just ordered the full screen glass protector from spigen through Amazon, presently using the yootech screen protector.
thought about going back to the diztronic but just a little too plain. and the uag has taken a few slips out the pocket already and has survived so will stick with this one for the time being.
Sent from my Pixel XL using Tapatalk
I have been using UAG cases for years. As soon as the version for the XL came out I had it. I used it for 2 days and hated it. It did not fit quite right and was very heavy compared to the Spigen Rugged Armor. I threw my UAG in a drawer and have no plans to use it again.
Mike02z said:
I have been using UAG cases for years. As soon as the version for the XL came out I had it. I used it for 2 days and hated it. It did not fit quite right and was very heavy compared to the Spigen Rugged Armor. I threw my UAG in a drawer and have no plans to use it again.
Click to expand...
Click to collapse
LMAO. thought about giving the rugged armor another try, just concerned about the small cutout for the autofocus sensor.
Sent from my Pixel XL using Tapatalk
Title says all. I dont care about protection of the phone as long as it provides good grip.
I've already got official Google case, but it makes the phone a little too big for me.
uggies said:
Title says all. I dont care about protection of the phone as long as it provides good grip.
I've already got official Google case, but it makes the phone a little too big for me.
Click to expand...
Click to collapse
Grip is decent, not great. Doesn't pull lint though which is nice.
https://www.amazon.com/Slim-Case-Go...13776387&sr=8-2&keywords=bear+motion+pixel+xl
Here is the one I own and I bought 1 for my iphone 2
Speck Presidio Grip
https://www.amazon.com/Speck-Cell-P...513820239&sr=1-4&keywords=speck+pixel+xl+case
My 2 favorite thin cases are the IMAK Cowboy and the Nillkin clear. The IMAK is the sandstone type in either black or blue. There are a ton of cheap clear cases out the but I haven't found one that feels as good as the Nillkin in my hand. The sides are micro serrated like no other clear case and it provides lots of grip and also feels great.
https://www.aliexpress.com/item/For-Google-Pixel-2-Pixel-2-XL-IMAK-Cowboy-Stand-Case-PC-Back-Hard-Matte-Case/32846606667.html?spm=2114.search0104.3.72.2f58cf51A8rTPS&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10130_10068_10324_10547_10342_10325_10546_10343_10340_10548_10341_10545_10084_10083_10615_10307_10313_10059_10314_10534_100031_10604_10103_10142,searchweb201603_36,ppcSwitch_2&algo_expid=bd9c6435-ad3b-422c-8af0-7f97c192e7d3-11&algo_pvid=bd9c6435-ad3b-422c-8af0-7f97c192e7d3&priceBeautifyAB=4
https://www.aliexpress.com/item/Case-For-HTC-Google-pixel-pixel-XL-Clear-TPU-NILLKIN-Ultra-Thin-Transparent-Nature-TPU-Soft/32773065388.html?spm=2114.search0104.3.17.1a6d197axO2yXp&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10130_10068_10324_10547_10342_10325_10546_10343_10340_10548_10341_10545_10084_10083_10615_10307_10313_10059_10314_10534_100031_10604_10103_10142,searchweb201603_36,ppcSwitch_2&algo_expid=2b130a0f-1e0b-46ab-81de-1c82239bc683-2&algo_pvid=2b130a0f-1e0b-46ab-81de-1c82239bc683&priceBeautifyAB=4
It may not be thin, and I have zero experience with it yet, but there is the dbrand grip. It is currently still in manufacturing, but I pre-ordered one. Bumper style case (rubber ring around just the edges of the phone, no back sorta deal) that is supposedly super grippy, plus is compatible with dbrand skins. I look forward to getting mine.
The typical basic case made of cheap plastic with decent grip, but it doesn't hide the Pixel's design
https://m.es.aliexpress.com/item/32784107297.html
This was a gift from my brother for my phone. It feels great in the hand while maintaining a non-slippery surface, also available in many colors:
http://s.aliexpress.com/jEziuyq6
A more rigid and premium one, this has the best grip of the three:
https://m.es.aliexpress.com/item/32770051239.html
This one has good grip https://www.amazon.com/gp/product/B01M2X72NO/ref=oh_aui_search_detailpage?ie=UTF8&th=1
Hard, snap case, with good texture and grip:
https://www.amazon.com/Maxboost-Per...coding=UTF8&psc=1&ref=yo_pop_d_yo_pop_d_pd_t2
Here's a 2nd for the Speck Presidio Grip.
And I think if you Google you'll find a 45% off coupon for Speck cases.
I just got my phone and the case a few days later.
And I feel much more secure about the safety of the phone.
Can't have it getting all scratched and dinged, can we?
I recently bought a Pixel XL (due to the Pixel XL 2 not having a 3.5mm audio jack) and I agree that the polished aluminium is quite slippery. I bought a Spigen Hybrid case which seemed a good balance of features for me. It certainly much less slippery than without.
Distronic case. Not super grippy but trippy enough has great protection. I got it and never looked back. Outside of that case I'd probably go for the speck one that people are talking about.
AllusionPDX said:
Distronic case. Not super grippy but trippy enough has great protection. I got it and never looked back. Outside of that case I'd probably go for the speck one that people are talking about.
Click to expand...
Click to collapse
I like hybrid cases and Speck is a good one, but it's not thin and doesn't extend beyond the camera hump.
Best slim, non slippery case for Pixel XL period.
http://amzn.eu/d/5rRBAZL
speck presidio grip... not the thinnest but a great case
I love the look of this phone, and have always used a case, so I'm interested in your thoughts on clear cases.
I've seen my dad use them and it seems like they can get quite dirty between the phone and the case. I don't know if I'll like the feel of the hard plastic case that you get.
I did also get the cheaper insurance through Verizon that only covers replacement and only $20 glass repair, so I may just go caseless.
Spigen Ultra Hybrid in clear.
I ordered the SunRemex from Amazon with built in screen protector. I don't know if it makes a difference, but only 1 cut out for the front speaker. Not even the camera. . Wonder if it will mess with motion sense.
I would highly recommend the Caseology clear case. It's $10 with the Amazon coupon and I've used this on many past phones but currently have it on my Not Pink 3XL. I'm receiving it today along with my 4XL to make sure and show off the coloring. https://www.amazon.com/gp/product/B07X7JWC3V/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07Y1S4FXG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 I used this on my 3XL and it hasn't yellowed and it held up quite well. Very pleased with the purchase and the black would accent the orange quite nicely.
Cdubzz20 said:
I love the look of this phone, and have always used a case, so I'm interested in your thoughts on clear cases.
I've seen my dad use them and it seems like they can get quite dirty between the phone and the case. I don't know if I'll like the feel of the hard plastic case that you get.
I did also get the cheaper insurance through Verizon that only covers replacement and only $20 glass repair, so I may just go caseless.
Click to expand...
Click to collapse
Just picked up this one from Amazon:
https://www.amazon.com/TORRAS-Google-Pixel-Case-Anti-Yellow/dp/B07XY48VW8
Getting it in the mail today. I can share my thoughts once I get it. I usually go caseless and use a pop socket but it won't stick to the back because of the finish. Plus I still want to use wireless charging so I can just remove the case every night. I bought a pop socket mount for my car a few weeks ago so I'd like to continue using that as well.
This one has a built in screen protector that sucks... I snatched it out the case and used a TGSP, now I absolutely love it!
https://www.amazon.com/dp/B07YKGS74G/ref=cm_sw_r_sms_apa_i_mseUDb3JG6829
Sent from my Pixel 4 XL using XDA Labs
I have the Spigen Ultra Hybrid, it's great so far.
Caseology Skyfall. Phone looks more orange than usual because of the warm lighting.
Sent from my Pixel 2 XL using Tapatalk
currently looking at two the ESR Case and the Caseology skyfall. Like the grippyness of the the ESR on the sides. The skyfall is a little bit more bulky and takes a bit of effort to take off after. not sure which one I like more.
ESR is in this thread with coupon codes
https://forum.xda-developers.com/pi...esr-tempered-glass-screen-protectors-t3987939
y2whisper said:
currently looking at two the ESR Case and the Caseology skyfall. Like the grippyness of the the ESR on the sides. The skyfall is a little bit more bulky and takes a bit of effort to take off after. not sure which one I like more.
ESR is in this thread with coupon codes
https://forum.xda-developers.com/pi...esr-tempered-glass-screen-protectors-t3987939
Click to expand...
Click to collapse
The Skyfall is on the bulky side but it does get easier to take off after a few tries. I take it off from the bottom first then peel off the rest easily.
Sent from my Pixel 4 XL using Tapatalk
I can tell you that the ESR Mimic is a great case.
I had ordered the ESR Mimic, the essential zero and the Spigen Liquid Crystal and ultimately kept the Mimic and returned the others.
The Mimic is slim, has the tpu bumper for grippiness and the glass back looks and feels great.
I got it with the above codes and before they raised the price a little so I paid approx. $14, which is a steal.
I know it'll yellow eventually with the tpu bumper, but I'll enjoy it until then. I've already got the google fabric case, which is bulkier but feels and looks great too. And, whenever rhinoshield gets their act together, I'm all over their bumper case.
Have been wanting to see this on a device. Using a fabric case myself, but this will likely be the next.
https://catalystcase.com/products/impact-protection-case-for-google-pixel-4-xl
mrro82 said:
Spigen Ultra Hybrid in clear.
Click to expand...
Click to collapse
best one!!!
Spiegen Liquid Crystal Clear. Looks glorious. Usually go with Rinke Fusion but glad I switched
I have the spigen ultra hybrid and the ESR essentially zero case. Both are great depending upon how much protection you feel comfortable with. While the ESR feels great and fits great, I feel better with the additional thickness of the spigen. But they are both great as far as clear cases go.
Cdubzz20 said:
I love the look of this phone, and have always used a case, so I'm interested in your thoughts on clear cases.
I've seen my dad use them and it seems like they can get quite dirty between the phone and the case. I don't know if I'll like the feel of the hard plastic case that you get.
I did also get the cheaper insurance through Verizon that only covers replacement and only $20 glass repair, so I may just go caseless.
Click to expand...
Click to collapse
ESR mimic case with promo code is the one i purchased and i an very pleased.
See the esr thread in the pixel 4xl accessories sub forum. I loaded a couple pics, thought i had more but were taken with old phone and didn't back up.
Really enjoy the tempered glass case back
razrlover said:
ESR mimic case with promo code is the one i purchased and i an very pleased.
See the esr thread in the pixel 4xl accessories sub forum. I loaded a couple pics, thought i had more but were taken with old phone and didn't back up.
Really enjoy the tempered glass case back
Click to expand...
Click to collapse
Yep. I'm still very much enjoying my esr mimic. Really nice case and as I said above, I also used the discount code.
I just yesterday ordered the Totallee thin case (also with nice discount) in my pursuit for a super slim case. Should have it Monday and I'm thinking I'll like it after reading some reviews. And I'm still waiting for the rhinoshield bumper case.
Sent from my Pixel 4 XL using Tapatalk
blazinazn said:
Just picked up this one from Amazon:
https://www.amazon.com/TORRAS-Google-Pixel-Case-Anti-Yellow/dp/B07XY48VW8
Getting it in the mail today. I can share my thoughts once I get it. I usually go caseless and use a pop socket but it won't stick to the back because of the finish. Plus I still want to use wireless charging so I can just remove the case every night. I bought a pop socket mount for my car a few weeks ago so I'd like to continue using that as well.
Click to expand...
Click to collapse
How's this case working out for you? I've been through a couple of clear cases so far but not completely satisfied yet and came across the TORRAS as well so I'm curious how it actually is.
I have the Spigen liquid crystal on right now, but the excessive branding along the edges is pushing me towards another case and I believe one of the ESR clear cases is the same way. Does the TORRAS have a lot of branding and text along the edges? I don't understand why they put all that on clear cases to begin with.
Lemonade727 said:
How's this case working out for you? I've been through a couple of clear cases so far but not completely satisfied yet and came across the TORRAS as well so I'm curious how it actually is.
I have the Spigen liquid crystal on right now, but the excessive branding along the edges is pushing me towards another case and I believe one of the ESR clear cases is the same way. Does the TORRAS have a lot of branding and text along the edges? I don't understand why they put all that on clear cases to begin with.
Click to expand...
Click to collapse
I'm liking it so far. I remove it every night to charge it wirelessly and it's not a problem. It doesn't add too much bulk and you can still see the design of the phone. There is absolutely no branding on the sides. The edges around the front aren't huge and don't bother me one bit. You can still easily call up the assistant with gestures.
Uploaded a few pics