Hello everyone
i tryed to flash TWRP recovery image via minimal ADB and Fastboot, but now i can't access the recovery. when i select recovery in fastboot mode it restarts, the screen turns blach for 3 sec and than it restarts again and boot into the normal mode.
i also tryed to flash the stock recovery.img, but there is the same problem.
does someone know how to solve this problem ?
I'm unlocked on stock, but my recovery doesn't load up. Can I flash CWM via ADB or Odin? In the guide you seem to need recovery to be working.
No idea how to ADB it:cyclops:
I recently tried to install multirom but it kinda messed up, Now I can't either do fastboot boot recovery.img or fastboot flash recovery.img cause none of them works. I also tried to recover stock firmware but it didn't help. any help is appreciated.
I can boot into stock recovery via fastboot boot recovery.img but cannot boot a twrp or cwm.
Hello! I've tried to root my phone (Moto G XT1541 Europe 1GB) but failed. I got an error when trying to flash the custom recovery. Unfortunately, it has overwritten the stock recovery and it didn't install. So, now I have a phone without recovery and I can't do a factory reset because of that (I think).
So, this is my question: how can I re install the default Android 6.0 recovery mode for my phone?
Also, my phone boots automatically on bootloader mode and I can't re-lock the bootloader because I can't flash anymore either; I got an error because the pre flash validation failed when trying to flash with adb fastboot, but this is minimal issues that doesn't really bother me, but they could be helpful and if someone knows how to get rid of them, I want to know!
I hope someone will help me!
Azyreal said:
Hello! I've tried to root my phone (Moto G XT1541 Europe 1GB) but failed. I got an error when trying to flash the custom recovery. Unfortunately, it has overwritten the stock recovery and it didn't install. So, now I have a phone without recovery and I can't do a factory reset because of that (I think).
So, this is my question: how can I re install the default Android 6.0 recovery mode for my phone?
Also, my phone boots automatically on bootloader mode and I can't re-lock the bootloader because I can't flash anymore either; I got an error because the pre flash validation failed when trying to flash with adb fastboot, but this is minimal issues that doesn't really bother me, but they could be helpful and if someone knows how to get rid of them, I want to know!
I hope someone will help me!
Click to expand...
Click to collapse
The bootloader cannot be relocked in the Moto G 2015, the best you can do is hide the warning screen. Find the stock image and fastboot flash the recovery from there, or better yet, flash the entire image so you are in a known working state
If you are in Pre-Flash validation, you do not have the correct image for your device... I suggest you post in the "How to flash factory images" thread about returning to stock, if it is possible. You MUST factory default before flashing factory images, if you can't, try 'fastboot erase userdata' and try again.
Flash latest twrp via fastboot and reboot into recovery ,
don't reboot into system,
reboot into recovery manually, then you can enter twrp recovery and can flash supersu 2.62.3.
when you just reboot after flash twrp and reboot system erase custom recovery and save stock recovery, so don't enter fastboot reboot, enter fastboot reboot recovery after flash recovery via pc.
Rename twrp recovery as only twrp in fastboot folder in your pc , not as twrp.img,
But cmd as fastboot flash recovery twrp.img , then no errors ( are you unlocked bootloader ?)
acejavelin said:
The bootloader cannot be relocked in the Moto G 2015, the best you can do is hide the warning screen. Find the stock image and fastboot flash the recovery from there, or better yet, flash the entire image so you are in a known working state
If you are in Pre-Flash validation, you do not have the correct image for your device... I suggest you post in the "How to flash factory images" thread about returning to stock, if it is possible. You MUST factory default before flashing factory images, if you can't, try 'fastboot erase userdata' and try again.
Click to expand...
Click to collapse
drmuruga said:
Flash latest twrp via fastboot and reboot into recovery ,
don't reboot into system,
reboot into recovery manually, then you can enter twrp recovery and can flash supersu 2.62.3.
when you just reboot after flash twrp and reboot system erase custom recovery and save stock recovery, so don't enter fastboot reboot, enter fastboot reboot recovery after flash recovery via pc.
Rename twrp recovery as only twrp in fastboot folder in your pc , not as twrp.img,
But cmd as fastboot flash recovery twrp.img , then no errors ( are you unlocked bootloader ?)
Click to expand...
Click to collapse
Hey! Thank you! I've been able to flash the TWRP recovery and now I can do a factory reset (and also send sms, which I couldn't do anymore for some reason).
I still have the issue where the bootloader screen appears everytime I turn my phone on, and I still can't re lock my device because I can't flash anything either. I've recovered all of my data, so I think I'm going to stick with that for a moment but maybe I'll try what you said some day.
Again, really thank you for helping me!
drmuruga said:
Flash latest twrp via fastboot and reboot into recovery ,
don't reboot into system, reboot into recovery manually, then you can enter twrp recovery and can flash supersu 2.62.3.
when you just reboot after flash twrp and reboot system erase custom recovery and save stock recovery, so don't enter fastboot reboot, enter fastboot reboot recovery after flash recovery via pc.
Click to expand...
Click to collapse
Now I understand why my flashing TWRP did not take. I simply rebooted to system and still have stock recovery installed. I was successful booting twrp via fastboot and successfully flashed supersu 2.62.3. Is this step in listed in any faq? I must have missed it.
So after flashing TWRP, do you then power down device prior to manually booting to recovery?
MrTooPhone said:
Now I understand why my flashing TWRP did not take. I simply rebooted to system and still have stock recovery installed. I was successful booting twrp via fastboot and successfully flashed supersu 2.62.3. Is this step in listed in any faq? I must have missed it.
So after flashing TWRP, do you then power down device prior to manually booting to recovery?
Click to expand...
Click to collapse
Don't power down, already you are in fastboot mode, you can just enter recovery from that. I forget the reference, but i will search and post.
---------- Post added at 04:41 PM ---------- Previous post was at 04:18 PM ----------
I get this from twrp official page
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
In our phone press simultaneously volume down + power button to enter recovery.
hi. i've got bootloop, that hang on first splash screen. i have access to the bootloader and twrp (so adb and fastboot). download mode unforentlly not working how can i flash full system using only fastboot and twrp? my last os was emui 4.0 (B803) so i wanted to downgrade manually flashing extracted B550 and yeah..
edit. when i flash stock recovery i have access to the download mode too. so what can i do to flash whole system back?
edit2. solved