Hello everyone
i tryed to flash TWRP recovery image via minimal ADB and Fastboot, but now i can't access the recovery. when i select recovery in fastboot mode it restarts, the screen turns blach for 3 sec and than it restarts again and boot into the normal mode.
i also tryed to flash the stock recovery.img, but there is the same problem.
does someone know how to solve this problem ?
Related
I have just restored my nexus 5 to the 5.1.0 factory image via fastboot commands. The phone boots up fine however when I try booting into recovery it just goes to a black screen.
I have also tried flashing a custom recovery via fastboot using the command fastboot flash recovery (recovery image name) but it doesn't recognise it.
Any help would be greatly appreciated!
its ok! i've fixed it
i flashed a kernel first, it was not compatiable, the phone was without fap lock, and got stuck to logo, i went to recovery and wiped cache , it worked.
then when the device booted up, i restarted the device and went to the logo stuck again, but this time it has fap lock on it so i couldn't access recovery or flash anything from odin, what should i do???
the kernel was for sm-920t
majedhabal said:
i flashed a kernel first, it was not compatiable, the phone was without fap lock, and got stuck to logo, i went to recovery and wiped cache , it worked.
then when the device booted up, i restarted the device and went to the logo stuck again, but this time it has fap lock on it so i couldn't access recovery or flash anything from odin, what should i do???
the kernel was for sm-920t
Click to expand...
Click to collapse
That happened to me i just restored via odin
Sent from my SM-N920T using Tapatalk
To boot into Recovery use this way:
Download a custom/stock recovery and setup Minimal ADB and Fastboot in your PC, Go to C:\Program Files (x86)\Minimal ADB and Fastboot , Paste the recovery you downloaded, rename it to Recovery.img and now in the same folder press shift + right click and choose open command window here. Plug the phone to the PC and write this commands:
adb devices
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot boot recovery.img
And now you're in recovery menu.
My Le 1s sucked on boot screen. I already installed TWRP on my mobile. Then downloaded stock rom from http://forum.le.com/in/eui_detail.html?euiid=205. and installed using adb sideload. Everything worked fine. But TWRP not working. Then I flashed TWRP image using adb fastboot. After installed, I used "fastboot reboot" command. But it is not worked. Then I rebooted normally.
After rebooting the device, it automatically go to the recovery mode. Same happen when power on the device. In recovery also TWRP not working. Custom recovery also not showing. After few second, it again going to normal boot. It repeated again and again
Can't use any adb comment on system. What should I try now?
Commant Used:
adb reboot bootloader
fastboot oem unlock
Pressed volume up to confirm unlock
fastboot flash recovery twrp.img
fastboot reboot
Hi guys.
I unlocked my bootloader, and installed the Global Beta Rom via TWRP.
Now, that I am finishing that, TWRP is not installed anymore. And I can't install it.
When I boot into fastboot, and install TWRP like usual, everything is ok. No error appears. But when I want to boot into TWRP via key-combination, nothing happens. When I boot MiUi again, then reboot and try to boot into TWRP again, the Mi-Recoverymenue appears. But not TWRP. Can anyone help here?
After ROM package installed, boot and setup everythings you need, reboot to fastboot mode.
You must install TWRP again, then boot to TWRP by using command, same as the first time you install TWRP. Full commands:
1. fastboot devices.
2. fastboot flash recovery twrp.img
3. fastboot boot twrp.img
DungHD said:
After ROM package installed, boot and setup everythings you need, reboot to fastboot mode.
You must install TWRP again, then boot to TWRP by using command, same as the first time you install TWRP. Full commands:
1. fastboot devices.
2. fastboot flash recovery twrp.img
3. fastboot boot twrp.img
Click to expand...
Click to collapse
Done that.
Device reboot, screen turns black. Then device reboot again, and MIUI will start.
After you install TWRP via fastboot command boot into TWRP via fastboot using the TWRP image on your computer. After TWRP comes up disconnect your phone from your computer, go into the TWRP reboot menu and select reboot into recovery. After you boot back into TWRP it should stick until you flash another ROM zip.
Same issue here.....please have a look at attached picture to see what I have done.
Even after a couple of minutes the screen remains black after trying to boot into TWRP.img with "fastboot boot twrp.img"
Is this a wrong command?
OK with rebooting the system is replacing TWRP, mens I need to go directly into TWRP without rebooting OS., but neither the command above nor ´"fastboot reboot" and simultaniously holding Vol+ and Power ware entering TWRP .....even more
Entering "fastboot reboot" afterwards, device is rebooting normally.
Would be great to explain how I can successfully get TWRP run.
Thx a lot!!
MIUI overwrites the recovery with each boot.
You'll have to get root access and adjust s few files (there is a guide somewhere here on xda) to get it to stay
flyingjack said:
Same issue here.....please have a look at attached picture to see what I have done.
Even after a couple of minutes the screen remains black after trying to boot into TWRP.img with "fastboot boot twrp.img"
Is this a wrong command?
OK with rebooting the system is replacing TWRP, mens I need to go directly into TWRP without rebooting OS., but neither the command above nor ´"fastboot reboot" and simultaniously holding Vol+ and Power ware entering TWRP .....even more
Entering "fastboot reboot" afterwards, device is rebooting normally.
Would be great to explain how I can successfully get TWRP run.
Thx a lot!!
Click to expand...
Click to collapse
Did you download wrong .img file for polaris?
All versions has capacity more than 46 MB. Latest version is 46788 KB.
DungHD said:
Did you download wrong .img file for polaris?
All versions has capacity more than 46 MB. Latest version is 46788 KB.
Click to expand...
Click to collapse
THx mate! actually I downloaded the wrong file. With the correct one evreythink is working fine!!!
this is not troll, i just forgot command, but i understand where is problem, i just need help in issuing command, and also keeping TWRP after booting in system
okay, this is not usuall getting stuck in twrp after flashing it via fastboot.
i just need help how to boot , system
because way i installed it, is via fastboot:
' fastboot flash recovery twrp.img '
done good
but i mistakenly followed tutorial , and executed what they said should be okay (i mean it is okay, to boot it into recovery, but my phone manufacturer is stupid and don't include proper fastboot)
so i typed command
' fastboot boot recovery '
which it booted into recovery, and when i reboot into 'system' from twrp it boots into system. i had same issue, but i forgot command how to do this (and link to that solution also)
i just know that, last command, my phone misinterpret it , to boot recovery as boot way. instead of kernel, boot.img
------------------------------------------
because we have beautifull documentation on fastbood issued by google, i don't know how to make it boot system, i mean, boot.img
and, i want it to keep twrp installed, suprisingly, when i go power + volume up , sometimes it brings stock recovery and sometimes twrp.
for now, help me how to issue command, to boot kernel and not recovery
- and phone is: Allview Viva H801 , android 5.0
yea, some no name, that's why i'm asking for help
---------------
EDIT:
i think i managed to permamently flash TWRP, which was purpose, because now I can, use power on + volume up , and it always brings up TWRP (yay)
but now, i don't know how i can access bootloader (fastboot) , if i need to issue commands you instruct me to issue. i can use only twrp
kraken-gz said:
this is not troll, i just forgot command, but i understand where is problem, i just need help in issuing command, and also keeping TWRP after booting in system
okay, this is not usuall getting stuck in twrp after flashing it via fastboot.
i just need help how to boot , system
because way i installed it, is via fastboot:
' fastboot flash recovery twrp.img '
done good
but i mistakenly followed tutorial , and executed what they said should be okay (i mean it is okay, to boot it into recovery, but my phone manufacturer is stupid and don't include proper fastboot)
so i typed command
' fastboot boot recovery '
which it booted into recovery, and when i reboot into 'system' from twrp it boots into system. i had same issue, but i forgot command how to do this (and link to that solution also)
i just know that, last command, my phone misinterpret it , to boot recovery as boot way. instead of kernel, boot.img
------------------------------------------
because we have beautifull documentation on fastbood issued by google, i don't know how to make it boot system, i mean, boot.img
and, i want it to keep twrp installed, suprisingly, when i go power + volume up , sometimes it brings stock recovery and sometimes twrp.
for now, help me how to issue command, to boot kernel and not recovery
- and phone is: Allview Viva H801 , android 5.0
yea, some no name, that's why i'm asking for help
---------------
EDIT:
i think i managed to permamently flash TWRP, which was purpose, because now I can, use power on + volume up , and it always brings up TWRP (yay)
but now, i don't know how i can access bootloader (fastboot) , if i need to issue commands you instruct me to issue. i can use only twrp
Click to expand...
Click to collapse
Connect to adb while booted into TWRP and type the command:
adb reboot bootloader
That "should" boot into fastboot
For future reference, when flashing TWRP via fastboot, immediately after you flash the TWRP.img, enter the command:
adb reboot recovery
That should boot straight into TWRP and keep TWRP. If you let the device boot into any other mode than recovery, it will revert back to stock recovery, you have to boot directly into TWRP immediately after flashing it in order to keep TWRP.