Related
Dear Folks at XDA,
I would like to ask for you help with my HTC Touch Pro 2. I recently tried to update it to the new AthineOS CHome TF3D WM6.5 Manila ROM v 1.0 and unfortunately I failed.
The problem is that my phone now freezes at the black startup screen with the Touch Pro 2 logo and the red codes at the bottom.
I've flashed the ROM several times before and never got this issue.
Due to the fact that the phone doesn't finish the boot-up and I thus I can't get ActiveSync I'm afraid I messed up my phone for ever.
Please someone tell me I got a way out of this, I'd appreciate it very much.
Greetz,
SjonSjon
umm.... I don't think you can change the firmware just yet on the CDMA version of the phone... if you used a HardSPL that's available in the Rhodium forums then you probably used a GSM specific ROM on your CDMA phone... not sure what to tell you other than making sure you read the CDMA forum before trying something so risky. Best solution, unless someone knows how fix your phone in it's current state, is to toss it under your car and run it over and try to cash in on the insurance.
Problem solved!
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
I am glad you have recovered the beautiful device; and thanks for sharing a working solution.
sjonsjon said:
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
Click to expand...
Click to collapse
Good job!
big thanks for solution.
You just saved my life!!!
Don't get our hopes up! This is the wrong forum. CDMA TP2s can't be flashed at all yet.
This was a life saver post so a quick bump for anyone that needs it.
I unlocked my CDMA phone, installed a few roms -- decided to go back to my stock rom default (which was Telus) -- reinstalled and bam -- bricked.
Well, technically it's not a brick if you can get back into the bootloader to reflash. So no worries everyone. If everyone reads instructions well enough we should hopefully see zero "real" bricks. Or at most, just enough to only build bbq pit rather than a house.
I think my phone is truly bricked
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
my cdma is rebooting endlessley i reflashed stock rom and evorything. it seriously dosnt want to work. its most sadness... i am cashing in on the insurence. but they are going to send me a refurb..
spend 600$ on a phone got inurnce i hope the used one dosnt fail me.
Esazi said:
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
Click to expand...
Click to collapse
I did the same exact thing to mt TP2. Same outcome.
We have to learn somehow....
That stinks man. If you did, then your phone is truly bricked. You are going to have to get a replacement or switch to another phone because there is nothing you can do to get it going again. I tried everything possible and eventually just ordered a replacement. I have it now and it's working beautifully, but needless to say I am a little scared away from any more unlocking or flashing for a while.
If you read carefully you dont have to be scared of flashing
I was a noob some time ago but before doing anything I took care of reading and understanding before doing nothing.
lesson learned
By now I have flashed more than 60 times on 3 diferent HTC devices and all were a succes
Hope you get your TP2 working again!
I hope I can get there
Someday I hope to be a flashing expert, but until then I will take it slow and read carefully. Thanks for your encouragement. When I actually get money to pay for the unlock for my TP2, I will let you know how flashing goes.
How do you keep the phone in bootloader? Mine goes right to the press volume instuction screen. Other than that I'm stuck on the black name screen,also my usb will not register in device manager. This was my first try at flashing.
gadgetgirl28 said:
You just saved my life!!!
Click to expand...
Click to collapse
Holy hell, you're not lying. Thanks for coming back to post your solution!
This post saved me at least a few hours of frustration and ever worsening decision making.
So it's totally true???
this situation hasn't solution;
I was unlocking my phone (the HTC Touch Pro 2 <SPRINT>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, AND PLEASE somebody tell me , that it can be save it
;9
please help
i have the same problem. is there a way to save my phone?
I have a Sprint Nexus S 4G that I've recently rendered without service or USB connection as a result of a fastboot accident. I'm currently running ICS 4.0.3 (Dooderbutt-aosp-v-5 build), but have tried restoring multiple backups on CM7 to no avail. Wiping all user data in CWM doesn't fix it either. I have also tried flashing the LC1 radio zip with no results.
The way I see it, my two best courses of action would either be to try and return to a stock ROM so that I can send the device in under warranty or to continue to try to fix it myself, which has been less than successful so far. Every process I have found online to return to stock seems to end in fastboot oem lock, which won't do anything for me as my phone doesn't show up in fastboot devices, file explorer, or seem to be recognized by my computer in either Ubuntu or Win 7. I've tried connecting on my friends' computers with the same results. I've also tried using another USB cable. No dice.
Sorry if I missed something obvious before posting. I tried to do a lot of research online and have reached the end of what I know what to do. Any suggestions?
Bump.
After some more researching, it appears that there is no way to lock the bootloader except through USB connection with a computer. Does this mean I'm out of luck? Any suggestions as to how to solve this issue? Since my first post, I've flashed ICS 4.0.4 with no improvement on the above symptoms. Also, auto-rotation doesn't seem to work. My Baseband version in About is listed as Unknown. Does anyone have any clue? Replies would be greatly appreciated.
have you updated the android drivers on your computer? you wont be able to connect to fastboot without the drivers. you can get it here http://www.junefabrics.com/android/ do the free download(on your computer) then follow the on screen instructions.
simms22 said:
have you updated the android drivers on your computer? you wont be able to connect to fastboot without the drivers. you can get it here ... do the free download(on your computer) then follow the on screen instructions.
Click to expand...
Click to collapse
I'm running Ubuntu, so from what I understand, I don't need any drivers. Prior to this fiasco, my computer recognized it as a storage device in the file system as well as a device in fastboot. It doesn't come up as either now.
I had a similar problem after I updated to ICS 4.0.3, what version of Ubuntu do you have, and does the device show up when you run lsusb?
Also, have you checked inside the usb connector to see if one of the pins is bent or damaged?
I'm running Ubuntu 11.10 and no, my Nexus doesn't show up in lsusb or anything else I seem to try. I have checked the pins in the connector of the phone and even bent them around a little bit, but I doubt that's the problem. Since it disappeared immediately after a bad flash, I'm fairly confident this is a software-induced error.
Ok, the only other thing I can think of is a bad kernel or baseband, but since you've tried several different roms, I don't think that's the problem (unless you put on one that's not for your model).
Sorry I can't be more helpful, hope you figure it out!
Thanks for your help anyway. To be clear, each rom has its own kernel and baseband, correct? Are those things I can flash independently of roms like the radio?
Found something, not sure if you've seen it already : http://forum.xda-developers.com/showthread.php?t=1077168
This bit is especially interesting :
"*If your having problems after the radio flash......go to dialer:
Type in *#*#72786#*#*, put your msl in, and let it re-provision"
For the usb not connecting, I had the same problem. After trying every computer in the house, I grabbed a can of compressed air for electronics and blew out my micro usb port on the phone itself. There was a small piece of lint in there that was causing the connection to not be made. It's worth a try.
statisticalanomaly said:
Found something, not sure if you've seen it already : http://forum.xda-developers.com/showthread.php?t=1077168
This bit is especially interesting :
"*If your having problems after the radio flash......go to dialer:
Type in *#*#72786#*#*, put your msl in, and let it re-provision"
Click to expand...
Click to collapse
I'm attempting to try this work around, but I can't seem to find my msl. I've tried putting in an incorrect code and checking alogcat for it as well as the terminal output of getprop. Neither of these give me the number. Sprint mentions using this code for resetting your phone in this tutorial, but I can't for the life of me find the part of their site that shows the msl.
This is exhausting. I really appreciate all your guys' help though. Thanks so much.
Unfortunately, I never figured out how to solve the problem. I took my phone into Sprint the other day and lucked out on the repair technician. He was messing around trying stuff and had a moment of realization when he booted into Clockworkmod. Even though I had voided my warranty, he still let me replace the phone for the $35 fee. I walked out with a brand new Photon 4G. I'm so happy, it's like Christmas in May!
To others who have this problem: sorry, but I don't know what to tell you! Mine was probably bricked. The MSL number didn't connect the phone and neither did anything else I tried. Best of luck to you.
Hi,
I just received my phone, and have a couple of total newbie questions. I have never had an android phone, but, have an unlocked android tablet for my daughter. I unlocked it with info from this site. Awesome help!! I couldn`t have done it without you. Needed a new phone, and couldn`t afford the home prices or contracts for the iphones, galaxies, etc, so went for the Jiayu G3. Just started using mine, but and having problem getting windows 7 computer to recognize the device. The screen looks great and so far, it seems nice, but I am not a phone tech. I`m more of a desperate user, willing to learn and try...with direction from someone with experience.
Has anyone else had a problem with this phone being recognized, I guess as a mass storage device, and is there some solution that someone can help me with?
Also, wondering whether or not to unlock the phone, once the first problem is solved. I don`t know too much about the benefit of the unlock in this case. Can someone share info on that? I SAID I`m a newbie, sorry.
Is there any must have software that any of you more experienced users recommend for this phone?
Does ANYONE know where I can find info on it in English, so that I can figure out what I`m pressing?
Seriously....Thank you!
Easter3 said:
Hi,
I just received my phone, and have a couple of total newbie questions. I have never had an android phone, but, have an unlocked android tablet for my daughter. I unlocked it with info from this site. Awesome help!! I couldn`t have done it without you. Needed a new phone, and couldn`t afford the home prices or contracts for the iphones, galaxies, etc, so went for the Jiayu G3. Just started using mine, but and having problem getting windows 7 computer to recognize the device. The screen looks great and so far, it seems nice, but I am not a phone tech. I`m more of a desperate user, willing to learn and try...with direction from someone with experience.
Has anyone else had a problem with this phone being recognized, I guess as a mass storage device, and is there some solution that someone can help me with?
Also, wondering whether or not to unlock the phone, once the first problem is solved. I don`t know too much about the benefit of the unlock in this case. Can someone share info on that? I SAID I`m a newbie, sorry.
Is there any must have software that any of you more experienced users recommend for this phone?
Does ANYONE know where I can find info on it in English, so that I can figure out what I`m pressing?
Seriously....Thank you!
Click to expand...
Click to collapse
Are you still having problems connecting as mass storage as i just plugged mine into my sons windows 7 pc and it installed drivers straight away. Whe you connect to pc does usb connected not show on screen and a turn on usb storage button not appear. If not then when you plug in the cable swipe down from the top of the phone to see the notification area. One of the notifications should read Connected As USB Storage Touch for other usb options. Now yours might say media device or camera (ptp) just push that button and you should be taked to a screen with 3 choices, usb storage-media device-camera(ptp) select usb storage and if drivers do not start to install pull out cable and plug in again and hit connect as usb staorage and then OK. Hope this helps, I have mine rooted but I would not bother as there is going to be an Jelly Bean update released if you root you won't get the over the air update or might even fail and download and manual update. Phone works great just as it is.
hello all! if you have a problem driver download PDANET install it on the PC and connect your phone. install the drivers it must be!
here is that if some help ....
Hello guys awesome forum BTW,
I have different android phones mostly Samsung xcovers and samung aces. They have software installed on them by a company. I want transfer the software on to another android device. I would ask the company but they want to charge me an arm and a leg per device and I have many devices. I've opened up both thinking they've inserted their own USB port to stop the phone connecting to a PC thus stopping any one going in to the device but this doesn't look like its been done. The other thing I think may have happened is the program has been flashed on! I can't access the phone apart from this app/software which pre-loads. Any advice or help would be greatly appreciated.
Thanks a bunch
Cloudless
cloudlessdreams said:
Hello guys awesome forum BTW,
I have different android phones mostly Samsung xcovers and samung aces. They have software installed on them by a company. I want transfer the software on to another android device. I would ask the company but they want to charge me an arm and a leg per device and I have many devices. I've opened up both thinking they've inserted their own USB port to stop the phone connecting to a PC thus stopping any one going in to the device but this doesn't look like its been done. The other thing I think may have happened is the program has been flashed on! I can't access the phone apart from this app/software which pre-loads. Any advice or help would be greatly appreciated.
Thanks a bunch
Cloudless
Click to expand...
Click to collapse
May be your USB cable is broken? Did you tried to use another cable?
cloudlessdreams said:
Hello guys awesome forum BTW,
I have different android phones mostly Samsung xcovers and samung aces. They have software installed on them by a company. I want transfer the software on to another android device. I would ask the company but they want to charge me an arm and a leg per device and I have many devices. I've opened up both thinking they've inserted their own USB port to stop the phone connecting to a PC thus stopping any one going in to the device but this doesn't look like its been done. The other thing I think may have happened is the program has been flashed on! I can't access the phone apart from this app/software which pre-loads. Any advice or help would be greatly appreciated.
Thanks a bunch
Cloudless
Click to expand...
Click to collapse
For data transfer purposes, I suggest Total commander + ADB plugin. You can access any file on both phone and transfer data conveniently.
oleg.derevenetz said:
May be your USB cable is broken? Did you tried to use another cable?
Click to expand...
Click to collapse
I pretty sure its not the cable; I use standard USB cables unless I need specific specialist data cables, I'm pretty sure this isn't the problem.
thehobit said:
For data transfer purposes, I suggest Total commander + ADB plugin. You can access any file on both phone and transfer data conveniently.
Click to expand...
Click to collapse
Thanks for the advice on software for data transfer!
The problem is the phones will not connect or be recognised by any PC! Other phones that don't have this pre-loaded software on connect with no problem.
cloudlessdreams said:
Hello guys awesome forum BTW,
I have different android phones mostly Samsung xcovers and samung aces. They have software installed on them by a company. I want transfer the software on to another android device. I would ask the company but they want to charge me an arm and a leg per device and I have many devices. I've opened up both thinking they've inserted their own USB port to stop the phone connecting to a PC thus stopping any one going in to the device but this doesn't look like its been done. The other thing I think may have happened is the program has been flashed on! I can't access the phone apart from this app/software which pre-loads. Any advice or help would be greatly appreciated.
Thanks a bunch
Cloudless
Click to expand...
Click to collapse
You might try to root the movile phone
garcia.sl said:
You might try to root the movile phone
Click to expand...
Click to collapse
Sure, but how can I route if I cant connect to a computer or download any file on to the phone?!
Hello! REALLY hoping I can find some help here! Tried everything! Really!
So the story is like so, I decided I wanted to root my phone and customize it a bit since I've previously owned an jailbroken iphone and really liked how I could change ANYTHING. BUT! I did not get far. My computer can not find my phone. Never connected my phone to my computer for other reasons than to charge, which still works, so never really noticed it. But yeah, charging works but other than that, nada. My phone model is the L29 version. 4gb ram etc.
Checklist:
Yes phone is unlocked.
Yes phone has usb debug on.
Yes phone is on MTP mode, yes I did enable/disable that tons of times since I heard it can help.
Yes I got the allow hisuite ADB or whatever it is called enabled.
Yes the phone does charge perfectly so there is some connection.
Yes I have installed all drivers, including hisuite. MTP packs, android studio with all extras.
Yes I have tried installing legacy hardware for multiple different MTP and android usb drivers.
What could it be?! I am going nuts by now, I don't even care that much about rooting anymore I just want the usb part to be working. (although yes I do still wanna root, will probably need more help then too).
Really thankful if anyone takes their time to help.
Best Regards, Dennis.
No one? Please.
same problem
vladmitra said:
same problem
Click to expand...
Click to collapse
do you tried with another PC or laptop?
Yes, I did. I'm 100% it's a software problem. I can't boot to fastboot as well.
did you solve it?