Related
Followed absolutelygrimm unbrick/downgrade methods but made silly mistake and screen remains black after last step. the phone is stuck in qdl mode, can't spam also. So my question is, will the phone get out of qdl mode if battery is totally drained???? TIA:good::good:
Do you have another pc to repeat the process?
I had that issue as well and it was an incompatibility between ubuntu and the USB-chipset.
Raptylos said:
Do you have another pc to repeat the process?
I had that issue as well and it was an incompatibility between ubuntu and the USB-chipset.
Click to expand...
Click to collapse
It worked only once on my desktop and i was able to perform the downgrade process to the end. However, it was failure and i was unable to repeat the process on the desktop. After that I tried it on a laptop and it didn't work. I will try more on my neighbor's computer and see how it goes.
Thank you very much for your response. :good:
Confused
khampaman said:
It worked only once on my desktop and i was able to perform the downgrade process to the end. However, it was failure and i was unable to repeat the process on the desktop. After that I tried it on a laptop and it didn't work. I will try more on my neighbor's computer and see how it goes.
Thank you very much for your response. :good:
Click to expand...
Click to collapse
During enumerating section, the phone goes form Qualcomm Gobi..... (qdl) to qualcom inc. and the spamming still does not work. what am i doing wrong?
Expensive paper weight?????
Did i break it??? :crying:
Identical thing happened to mine. I'm still stuck in QDL mode myself. I have tried everything, but nothing works.
I found someone online that will restore the phone for $50, guess I will need to try that next.
I also waited 4 days for the battery to drain, it did nothing to help.
help
mycomputerisjunk said:
Identical thing happened to mine. I'm still stuck in QDL mode myself. I have tried everything, but nothing works.
I found someone online that will restore the phone for $50, guess I will need to try that next.
I also waited 4 days for the battery to drain, it did nothing to help.
Click to expand...
Click to collapse
In the same situation. Did you get it fixed? I've done this twice before and worked perfectly. Now this time I finished all the steps but the charge light never came back on. i tried to start from the begining but now it won't list the sd*12/sd*4 when i type ls /dev/sd*. i've tried holding power for 10sec, replugging, different computer, waited 2 days, etc. Is it completely bricked?
squirt22 said:
In the same situation. Did you get it fixed? I've done this twice before and worked perfectly. Now this time I finished all the steps but the charge light never came back on. i tried to start from the begining but now it won't list the sd*12/sd*4 when i type ls /dev/sd*. i've tried holding power for 10sec, replugging, different computer, waited 2 days, etc. Is it completely bricked?
Click to expand...
Click to collapse
yes, unfortunately so.
You will have to take it to a JTAG service or carrier/HTC, who might bill you for it.
I think I bricked my one X im not sure how or why but out of the blue it just said the 10 second power off message and no longer turns on at first i was able to turn it on a few more times but now i cant.
It is not taking charge both from my computer or ac :/
when i plug it into my computer it says HID compliant device found. and the three led buttons light up every about 5-10 seconds but the top led notification doesnt turn on
If it matters
Hboot 1.14
on jokerfg jb rom
also this is a week and a half old device. if i have to replace it i will but I am more concerned with formatting it or getting it to stock before hand incase i send it in and they get it running
Uff. I have not encountered this issue. Sorry brother. Update if you find a fix.
Sent from my HTC One X+ using xda app-developers app
How did it get to that state?
What are the 5 contact looking things at the back of the phone for?
Sounds like you need to give the thing some charge, i'm sure one of those street corner shops can pop it open, macgyver some volts in, and reflash something that will boot for $30ish?
I'm not really sure, my power buttton is stuck but it retracts like a button should, but it has died and refuses to power up now. I just wanna turn it on to reformat it. or is it possible htc wont be able to turn it on themselves and when they receive it just trash the device?
gururug said:
How did it get to that state?
What are the 5 contact looking things at the back of the phone for?
Sounds like you need to give the thing some charge, i'm sure one of those street corner shops can pop it open, macgyver some volts in, and reflash something that will boot for $30ish?
Click to expand...
Click to collapse
so the battery is dead and it wont charge? if it will charge youll have to relock the boatloader and ruu to stock if u cant get in to recovery
Leave the phone on the wall charger (not USB) for several hours (overnight) and see if you can boot. You might also try to power on, or hold the power button, or try to enter hboot while the phone is plugged to the charger (after letting it charge for several hours). As at least one guy that I thought was hard bricked got his phone to boot this way.
What appears like spontaneous power off has happened to some people. So it may be nothing that you did. Hopefully, letting it charge for a few hours will fix it up.
I have the same exact problem as the OP. I have already made a thread and have tried to express my problems but I don't think people are willing to help (although some did and I appreciate it a lot) so I am going to try to get some help here. Help a brother out?
mr.5106411 said:
I have the same exact problem as the OP. I have already made a thread and have tried to express my problems but I don't think people are willing to help (although some did and I appreciate it a lot) so I am going to try to get some help here. Help a brother out?
Click to expand...
Click to collapse
I had this happen. I left it on charge (from powerpoint not USB to PC) over night and then connected back to PC. It didnt start but the pc was telling me USB device connected and disconnected when long pressing power button.
after running RUU and changing bootloader I finally got it to work. I would try the latest RUU from US / ATT as it has newest everything and see how that goes.
vangoogle said:
I had this happen. I left it on charge (from powerpoint not USB to PC) over night and then connected back to PC. It didnt start but the pc was telling me USB device connected and disconnected when long pressing power button.
after running RUU and changing bootloader I finally got it to work. I would try the latest RUU from US / ATT as it has newest everything and see how that goes.
Click to expand...
Click to collapse
Thanks for the reply but how did you RUU if the phone connects then disconnects quickly?
mr.5106411 said:
Thanks for the reply but how did you RUU if the phone connects then disconnects quickly?
Click to expand...
Click to collapse
It stays connected. I meant u can hear the Win 7 sound of connect USB when u press power and then disconnect USB if u long press power.
Sorry I cant be of more help.
i would try ruu or another usb cable
vangoogle said:
It stays connected. I meant u can hear the Win 7 sound of connect USB when u press power and then disconnect USB if u long press power.
Sorry I cant be of more help.
Click to expand...
Click to collapse
Thank you for your help so far. Ill try this tonight.
mr.5106411 said:
I have the same exact problem as the OP. I have already made a thread and have tried to express my problems but I don't think people are willing to help (although some did and I appreciate it a lot) so I am going to try to get some help here. Help a brother out?
Click to expand...
Click to collapse
I'm one of the folks who tried to help you in the other thread. Saying that you think people are unwilling to help sounds ungrateful and a bit whiny. Remember that the community here provides help for free, and that we also have lives and can't be on here to help you all the time.
Since you've tried charging (wall charger) for several hours, and tried (unsuccessfully) to get into bootloader, there isn't much else you can do. The idea of trying to run the RUU is a good one. But if you can't connect and can't run the RUU, the phone might be done. In particular, the blinking red light is not a good sign. I think there have been some other folks that have gotten this recently, and were not able to recover from it.
But keep trying to charge, and keep trying the bootloader button combo. The fact that your condition happened right after trying to restore a nandroid, leads me to believe its something that can be recovered from, and not a random hardware failure. But that is just a gut feeling, and maybe a bit too optimistic.
when my battery dies and i plug it up to charger led blinks red until it has enough juice to be powered on. you shouldn't try to power on your phone when it is blinking red, i assume that might end up killing the battery for good if you do.
Hello. I have problems with my device, a Motorola Razr xt925 HD. It doesn't start, it just keeps the green led blinking when connected to wall charger, and when I plug the USB, makes a sound of a new device detected but only for a few seconds then it makes a sound of an unplugged device, and so on. It doesn't respond to any combination of buttons. I let it charging overnight, even though the battery was nearly full before this happened. Don't know if this is relevant but before this happened, I was going to flash stock Retail Brazil firmware by fastboot and got a flash failure. I turned it off and then it wouldn't turn on again. I never had this happened, I had problems but I always solved them all. Not this time hopefully you guys can help me or tell me what it could be, because I doubt it was the battery. I leave you a video showing my case.
i dont know for certain but the only time i see that green light is when battery is ou and i put it to chrge. Could your phone be in apfastboot and can t charge. It is a bit of a tough situation to troubleshoot.
Did you try keys combo to put it in fastboot, and test it by flashing
or maybe use rsd lite see if it shows you device connected? maybe then you can flash stock
i am sure there are other possibilities, let s hear from you
There's no way to enter in Fastboot by key combos and RSD lite doesn't show my device :/ maybe I need a factory cable, just in case that the battery is empty. I need more suggestions please
me paso lo mismo
did you find any solution?
im having this problem after i start using KK 4.4.2 seems like the phone go to sleeping mood by it self while my screen is locked so i have to keep clicking at power and volume up and down to restart the device now im looking for an update or a fix for this problem, another problem is the device WIFI do not catch my house signal while im away 10 feet from the house the software have bugs
I've been using CM 11 (KK 4.4.4) with no issues. This is a flash problem or maybe the battery. My phone is still dead btw I see that two more people are having the same problem here... we need a solution please.
chuYxP said:
I've been using CM 11 (KK 4.4.4) with no issues. This is a flash problem or maybe the battery. My phone is still dead btw I see that two more people are having the same problem here... we need a solution please.
Click to expand...
Click to collapse
i think your your device is dead.
this exact thing happened to me.
it happened on september, i was forced to get a new device.
i love this phone but it was dead.
i hope a fix comes through i would like to have it back
I ll take one of your hand, I need parts if interested
Any update with this? Did you try with a factory cable?
I'm going through the same thing , I read the other day that and the driver installed and nothing more .
keep trying to revive my device.
I'm going through the same thing. When I plug it into my pc , under device manager it shows "Human Interface Device" then it unmounts itself then remounts itself then unmounts. Over and over..... I've even replaced the battery.
I was running stock rom with just root, phone was working great. phone rebooted, screen never came back on but when i connect it to my computer it sees it in adb..........
Any advice would be great.
Thank you
kilroy1stcav said:
I was running stock rom with just root, phone was working great. phone rebooted, screen never came back on but when i connect it to my computer it sees it in adb..........
Any advice would be great.
Thank you
Click to expand...
Click to collapse
This thread for the droid Ultra might interest you: http://forum.xda-developers.com/droid-ultra/general/droid-ultra-maxx-brick-recovery-t2830806
There is some discussion of the Razr HD in this thread. It looks like someone with an unlocked device would need to dd their bootloader partition for this method to work.
A few years later .... Any solution? rsrsrs
any update on this scenario?
i have this situation too and the time could give us an answer, i am searching again, i took my device to some 'phone repair stores' and in less than 5 minutes they told me that the phone was dead, but i have my last doubts
Just to add an update here
I ended up with the Green light only and blank screen after trying to fix a battery issue, despite getting a number of batteries my phone wasn't accepting the batteries.
I remembered a battery issue a long while back, so went to reflash my phone to see if it resolved it.
I ended up with the green light and blank screen and no matter what buttons, it would just make a noise then keep rebooting.
I ended up using the Unbrick bat file.
RSD Lite was briefly showing a Medfield device of something starting with Med, but since the phone kept rebooting I couldn't reflash it again.
I did the Pwr and Vol down and as soon as I saw the device, I clicked the UnBrick bat and it managed to get my Moto logo up.
I then booted to Fastboot mode and reflashed and my phone is back,
See this link for the UnBrick, but when you do it, you have to be fast to catch it while the device is seen, otherwise the phone reboots after 4s or soo.
Softely Unbrick XT890 Razr i - Really Unbrick the Zombie
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you ! Every has his experience and a way to do it, so this is mine First I searched...
forum.xda-developers.com
Hello everyone,
This morning while I was having coffee, my phone started playing jokes on me. At first it got really slow while doing the easiest things, like checking a mail, send a text and make a phone call. 10-15 After that I get a notification, Phone was locked, I tried to unlock it. I did spam the button like 5-10 times, Screen won't come up, but notification LED was working. At that point I thought that the power button was pretty much done for. Nope not the case. I held it down for 10 seconds, phone actually powered down. No chance in hell I could turn it back on. At that point I just went home. Got home plugged the phone into my PC. As soon as I did that, Windows started to check for a driver, had to wait almost 5 minutes to find QHSUSB_BULK.
Now, doing a bit of a search I found out that this could be the result of different problems, One that has to do with the memory just dying cause yeah, Nexus 5 and the eternal memory problem +Lollipop screw around with Data partitions, another that has to do with Roms, another that had to do with custom recovery.
What the hell is in my case? I run a custom Rom and a custom recovery, Atm I have Cyanogenmod 12.1 and lateste TWRP recovery.
I have a handful of tools at my disposal, a Cable, a good keyboard and a iron will.
In this case, Can I do something to fix my phone from home? Can't really send into warranty as I have custom software that's running on it and I'll just get a generic response that basically tells me that my warranty was voided due to custom software running on the terminal. We all love generic response like that, Don't we?
TLR: Phone died this morning, I couldn't unlock the screen and I thought it was the power button be cause, the notification led was still working. At that point I just powered it down by holding the power button down for 10 sec.
I wasn't able since to power it back on. If I connect it to my PC I get QHSUSB_BULK.
Hopefully there's some one who can point me in a direction ASAP. I have no backup phone atm and I really need this one to actually be ALIVE again.
Can't send it to Warranty because I run custom software on it. GSM Services/Fix Shops are out of the question too.
Pls halp ASAP
Will pay in Galactic Credits.
Thanks!
Your best bet is to try this, http://forum.xda-developers.com/showthread.php?p=51823398. Good luck, your device is not in a good state.
Sent from my Nexus 9 using XDA Free mobile app
metalheadbk said:
Hello everyone,
This morning while I was having coffee, my phone started playing jokes on me. At first it got really slow while doing the easiest things, like checking a mail, send a text and make a phone call. 10-15 After that I get a notification, Phone was locked, I tried to unlock it. I did spam the button like 5-10 times, Screen won't come up, but notification LED was working. At that point I thought that the power button was pretty much done for. Nope not the case. I held it down for 10 seconds, phone actually powered down. No chance in hell I could turn it back on. At that point I just went home. Got home plugged the phone into my PC. As soon as I did that, Windows started to check for a driver, had to wait almost 5 minutes to find QHSUSB_BULK.
Now, doing a bit of a search I found out that this could be the result of different problems, One that has to do with the memory just dying cause yeah, Nexus 5 and the eternal memory problem +Lollipop screw around with Data partitions, another that has to do with Roms, another that had to do with custom recovery.
What the hell is in my case? I run a custom Rom and a custom recovery, Atm I have Cyanogenmod 12.1 and lateste TWRP recovery.
I have a handful of tools at my disposal, a Cable, a good keyboard and a iron will.
In this case, Can I do something to fix my phone from home? Can't really send into warranty as I have custom software that's running on it and I'll just get a generic response that basically tells me that my warranty was voided due to custom software running on the terminal. We all love generic response like that, Don't we?
TLR: Phone died this morning, I couldn't unlock the screen and I thought it was the power button be cause, the notification led was still working. At that point I just powered it down by holding the power button down for 10 sec.
I wasn't able since to power it back on. If I connect it to my PC I get QHSUSB_BULK.
Hopefully there's some one who can point me in a direction ASAP. I have no backup phone atm and I really need this one to actually be ALIVE again.
Can't send it to Warranty because I run custom software on it. GSM Services/Fix Shops are out of the question too.
Pls halp ASAP
Will pay in Galactic Credits.
Thanks!
Click to expand...
Click to collapse
Have you tried booting into secondary boot loader?
Sent from my Nexus 5 using XDA Free mobile app
But the phone won't turn on.
jd1639 said:
Your best bet is to try this, http://forum.xda-developers.com/showthread.php?p=51823398. Good luck, your device is not in a good state.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I have the exact same problem but this answer doesn't help. This solution requires that you can turn your phone on in the first place. He specifically said he can't turn the phone on at all. Same with me, no matter what I've got nothing. Need help!
metalheadbk said:
Hello everyone!
Click to expand...
Click to collapse
this is what you are looking for http://forum.xda-developers.com/goo...-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
bitdomo said:
this is what you are looking for http://forum.xda-developers.com/goo...-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
Click to expand...
Click to collapse
Thanks to everyone.
I used the board diag - clicked Start and... it said "failed to open partition from EMMC". The test aborted. I think my phone is gone for good.
Oh and I had to take the battery out, plug it in, and sometimes re-attached to latch that goes over the battery several times before I could even get it to read anything in Device Manager. Before that it would say "failed USB connection".
This all started yesterday when the phone just spontaneously put itself into a boot loop while on charge. I tried to do a factory reset but it froze. After several hours I tried to cancel it. The Nexus went full brick.
Thanks again
leopoldstotch25 said:
Thanks to everyone.
I used the board diag - clicked Start and... it said "failed to open partition from EMMC". The test aborted. I think my phone is gone for good.
Oh and I had to take the battery out, plug it in, and sometimes re-attached to latch that goes over the battery several times before I could even get it to read anything in Device Manager. Before that it would say "failed USB connection".
This all started yesterday when the phone just spontaneously put itself into a boot loop while on charge. I tried to do a factory reset but it froze. After several hours I tried to cancel it. The Nexus went full brick.
Thanks again
Click to expand...
Click to collapse
I am afraid the emmc tied then. You have to buy a new motherboard.
Tapatalk-kal küldve az én Nexus 5-el
Thanks for your help.
Hello, I was flashing cm-11.0-XNF9XBS28K-bacon-signed on my opo and something went wrong on recovery, it was like rom flashing went wrong and it didn't happen, so I went to wipe and I'm pretty sure that I selected everything in wipe section, literally everything and hit the reboot button, and my phone won't wake up, no response, tried to press buttons in every combinations for maybe 1 min? My computer won't recognize my phone, nothing happens, no vibration, no sound ;x I think I erased everything, but is it possible to delete bootloader that way? Btw my battery was charged to about 90%.
I tried charging in for about 14hs and nothing happened, phone and charger during this time were cold. I tried to recognize it by Windows 10/XP and Ubuntu but no reponse from phone, so I coulnd't use this magical method with qualcomm port and drivers, and then this Color. Is it really bad hardware brick?
Have you tried this thread by any chance? Hopefully it works. Worked for me when I bricked mine by flashing hydrogen
https://forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
I tried, but my PC can't detect my phone in any state.
latuch91 said:
I tried, but my PC can't detect my phone in any state.
Click to expand...
Click to collapse
Can you try long pressing the power button for 10 seconds or more to turn it off. Then long press the power button and connect to a PC and see if it responds
Sent from my A0001 using Tapatalk
Ok I will try, but I tried before some combinations with buttons and connecting to PC, now I'm testing "dead battery" so 12hrs without touching and 6 hrs charging and then unplug and plug again. But I'm almost convinced that it's something with mainboard I talked to OP and they said that they will exchange my phone If it happened during flashing Cyanogen ROM.
//Still no respond from the PC and phone. Completely dead.
Dont worry, they wont know u had twrp if the phone is hard bricked. Just carry on your RMA process. Good luck...
Today's remote session went as I thought will be, did almost everything as this technician. Now awaiting RMA ticket.
latuch91 said:
Today's remote session went as I thought will be, did almost everything as this technician. Now awaiting RMA ticket.
Click to expand...
Click to collapse
hello i hard bricked my opo two days ago but its ok now plz follow this
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
malikzafar said:
hello i hard bricked my opo two days ago but its ok now plz follow this
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
:good: Used this thread twice now and it saved my phone. Give it a shot.