Related
Please help me!
Do u have 1) bootloader unlocked and 2) custom recovery?
I need help on the same. rom: CM13, android 6.0. device moto g falcon, XT1033.
Need to root the device, but if i'm using old methods to root, then my bootloader hangs on loading.
Use the inbuilt root via developer options!
Andus1988 said:
Use the inbuilt root via developer options!
Click to expand...
Click to collapse
I enabled root access for apps and adb but unfortunately it doesn't work.
Root check shows that the device is not rooted.
System app remover (ROOT) used to work fine before upgrade to CM13.
I am on the most recent nightly and yesterday's gapps.
druhboruch1 said:
I enabled root access for apps and adb but unfortunately it doesn't work.
Root check shows that the device is not rooted.
System app remover (ROOT) used to work fine before upgrade to CM13.
I am on the most recent nightly and yesterday's gapps.
Click to expand...
Click to collapse
Inbuilt root on CM13 (official) is working for me!
Andus1988 said:
Inbuilt root on CM13 (official) is working for me!
Click to expand...
Click to collapse
Could you confirm it by running Root Check application?
druhboruch1 said:
Could you confirm it by running Root Check application?
Click to expand...
Click to collapse
Yes, it says "Congratulations! Root access is properly installed on this device!"
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
The very first thing you have to do is to unlock your bootloader if you want root.
It's not possible for Moto G3 I think..
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
i also have same problm plz help....
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
I am having the problem with link2sd app whenever I tried to integrate any app into system and reboot my device it completely remove that app from the device ......why its happening
Yousvel said:
The very first thing you have to do is to unlock your bootloader if you want root.
Click to expand...
Click to collapse
Ok.. I know about the whole process of rooting the MOTO G3 is .
I am asking if the SystemLess Root is working on MOTO G3 Marshmallow Update
I have seen some posts where MOTO G3 users have used the SystemLess Root on Lollipop.
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the Reply.
You weren't clear about whats working great.
Rooted MOTO G3 Marshmallow or SystemLess Root as It is also SuperSu v2.62
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Dom3616 said:
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Xt1550 2gb
Android 6.0
2.8.7.0 r5
supersu 2.62 flashable zip
All links are on xda search them
Sent from my MotoG3 using Tapatalk
sbsharma said:
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
Click to expand...
Click to collapse
Thanks For the Reply.
I asked two questions and you replied only to one or to Both.
It confused me.
But Thanks for the HELP.
My xender app does not work after this system update can u plss tell me y???? And wt is the soln
Dom3616 said:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Agree. And the procedures need to fill all the gaps of info that currently exist. For example, after unlocking bootloader, it would have been helpful to know that you need to reboot and let the system rebuild itself (which takes several minutes) before moving on to anything else such booting/flashing TWRP & rooting.
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
First of all, Systemless Root is Available for MOTO G 3RD GEN.. Just Grab the zip.. No other zip will work except BETA-SuperSU-v2.62-3-20151211162651.zip..
Rooting moto g3 marshmallow
Can Anyone Provide me twrp recovery and systemless supersu for moto g3 marshmallow?
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Persechini said:
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Click to expand...
Click to collapse
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
gregferns said:
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
Click to expand...
Click to collapse
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
acejavelin said:
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
Click to expand...
Click to collapse
I never do auto rooting... I always follow the guides for any phone.... I was just enquiring of him if he had done it that way ????
As to your 2nd point I had done a TWRP of my stock rom for the merlin,,, and then like a dumbass i had kept it on my sd card (64gb ) which suddenly decided to die on me.... so i lost that...
Anyway,, when i try to put back my MOTO GTE to stock, i will flash the firmware and then try the systemless root,,, have never done that before..
thanks for the stepby step guide..
cheers
Greg
Hello All My Friends.
I want to Run XMOD but as you all know it does not works on UNROOTED devices.So i tried to root my device. I tried rooting my device with several methods BUT FAILED TO ROOT. Please check my steps below. Are They Correct ?
MY VERY FIRST METHOD
* I tried rooting with several apps like Framaroot, kingoroot, but I failed.
SECONDLY
* Then i found a thread on XDA for rooting by flashing SuperSU. Alright.
What i did was first i unlocked my Bootloader. (MY SCREEN IS SHOWING : Device Is Unlocked : Status Code 3)
Then i installed TWRP.
After that i Flashed 'UPDATE SuperSU v 2.46.zip'
After successful flashing MY PHONE STUCKED ON 'UNLOCKED BOOTLOADER WARNING LOGO'.
* i waited for more than 30 minutes but i failed.
THIRD METHOD
I also tried with this method.
Downloaded 'r2-motog-superboot' and connected my phone.
Typed this command superboot-windows.bat file.
PHONE RESTARTED BUT IT DID NOT ROOTED MY DEVICE. I checked with Root Checker App It Is Showing UNROOTED.
PLEASE PLEASE PLEASE HELP ME TO ROOT.
MY PHONE's O/S Is Android Marshmallow 6.0
I FLASHED MY PHONE WITH STOCK ROM I NOW MY DEVICE IS WORKING. BUT I WANT TO ROOT IT.
Flash SuperSU v 2.62 systemless root and than while reboot click on DO NOT ROOT msg in twrp....
Sent from my Toilet using Moto G3....
ifu said:
Flash SuperSU v 2.62 systemless root and than while reboot click on DO NOT ROOT msg in twrp....
Sent from my Toilet using Moto G3....
Click to expand...
Click to collapse
Hello Thanks For Replying. But Can U Tell Me In Detail. How to Flash SUPERSU SystemLess Root ? And When Will I Get DO NOT ROOT MEssage ?
First install SuperSU from https://drive.google.com/file/d/0B7XI4DjSTF85M1ZYUjR2aXpTa2c/view?usp=docslist_api
And than after installing when u will restart from TWRP u will get msg to install SuperSU just click DO NOT INSTAL and ur Mobile will be restarted....
ifu said:
First install SuperSU from https://drive.google.com/file/d/0B7XI4DjSTF85M1ZYUjR2aXpTa2c/view?usp=docslist_api
And than after installing when u will restart from TWRP u will get msg to install SuperSU just click DO NOT INSTAL and ur Mobile will be restarted....
Click to expand...
Click to collapse
Thanks For The Reply. Did Not Tried Your Method BUT I AM SUCCESSFUL TO ROOT MY MOTO G 3rd Gen With My OWN BRAIN... Will Soon Create A Thread HERE For ALL. How I Rooted , Installed Stock Firmware And Protected It From Bootloop.
pls tell how to root moto g3 6.0
AndroidTopGames said:
Thanks For The Reply. Did Not Tried Your Method BUT I AM SUCCESSFUL TO ROOT MY MOTO G 3rd Gen With My OWN BRAIN... Will Soon Create A Thread HERE For ALL. How I Rooted , Installed Stock Firmware And Protected It From Bootloop.
Click to expand...
Click to collapse
please help me.
pls tell how to root moto g3 6.0
landylogesh said:
please help me.
pls tell how to root moto g3 6.0
Click to expand...
Click to collapse
There's a thread in the general section relating on how to unlock bootloader , root and install twrp and also xposed if you like! Have a look! It's easy and the safest and yes it did work for me and therefore my suggestion! Cheers!
hi guys.....
i had recently unroot my moto g3 and install stock root to use my jio sim.
but i really miss the root access so, is there any way to root my stock unrooted rom to have root access.
when i flash supersu it will get stuck into bootlogo and will not proceed.
i waited for half an hr but no sign of booting up
anyone have a way to get root access to stock rom plzz help........
Sushilsingh said:
hi guys.....
i had recently unroot my moto g3 and install stock root to use my jio sim.
but i really miss the root access so, is there any way to root my stock unrooted rom to have root access.
when i flash supersu it will get stuck into bootlogo and will not proceed.
i waited for half an hr but no sign of booting up
anyone have a way to get root access to stock rom plzz help........
Click to expand...
Click to collapse
There are no less than 3 threads dedicated to rooting this device on Marshmallow that are tested and working... did all of them not work for you?
Yeah bro there is such kind of problem on rooting stock marshmallow ROM but I used kingroot v 4.8.2 for rooting if your bootloader is unlocked.
chirayu19091997 said:
Yeah bro there is such kind of problem on rooting stock marshmallow ROM but I used kingroot v 4.8.2 for rooting if your bootloader is unlocked.
Click to expand...
Click to collapse
Never use a one-click root method on a Moto unlocked device... Seen way to many bricked devices, always root manually.
It is easy to find, there is a thread in my signature.
acejavelin said:
There are no less than 3 threads dedicated to rooting this device on Marshmallow that are tested and working... did all of them not work for you?
Click to expand...
Click to collapse
I tried all 3 ways
nothing work out for me
Sushilsingh said:
I tried all 3 ways
nothing work out for me
Click to expand...
Click to collapse
If you have current SuperSU and TWRP, and use the echo command to create /data/.supersu it will work, if it isn't please go to thread in my signature and provide details including:
1) Device model and Android version
2) TWRP version
3) SuperSU version
4) Output of 'cat /data/.supersu' from TWRP terminal
And a copy of recovery.log if possible, without more specific information there is nothing that I can do to assist you.
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Code:
SYSTEMLESS=true
So the best is to make sure you don't use an older version of SuperSU than 2.79 SR3!
That's it and it works. SuperSU.apk is going to be installed in step 6.
Successfully tested with XT1642, XT1622 (eta82), XT1643 (Adarsh balu), XT1644 (WTF?), XT1641 (EkisDeMX).
It's the same old guide man. Please see before posting if similar threads exist. XDA is getting confusing for the common non-techie person anyways.
Works perfect on Moto g4 (XT1622) :good:
I've tried to install SuperSU before and it didn't work on my device XT1640. I've got a bootloop and had to flash stock ROM (now I'm using another supersu). Does it really work now? Cuz I don't want to get a bootloop again and lose all my data.
Dex5er said:
I've tried to install SuperSU before and it didn't work on my device XT1640. I've got a bootloop and had to flash stock ROM (now I'm using another supersu). Does it really work now? Cuz I don't want to get a bootloop again and lose all my data.
Click to expand...
Click to collapse
You have to use SuperSU v2.79 SR3. If you use any older version, it won't install systemless and causes bootloops.
Which version of SuperSU did you flash?
And you have to flash ElementalX kernel before installing SuperSU. Otherwise you will get bootloop too.
tywinlannister7 said:
It's the same old guide man. Please see before posting if similar threads exist. XDA is getting confusing for the common non-techie person anyways.
Click to expand...
Click to collapse
Didn't find any thread which describes the method rooting with SuperSU in the first post and as its topic.
In some threads (with other topics like how to root with phh's SuperUser) there is in the discussion mentioned this method with SuperSU but nobody will ever find these posts...
disguisedview said:
You have to use SuperSU v2.79 SR3. If you use any older version, it won't install systemless and causes bootloops.
Which version of SuperSU did you flash?
And you have to flash ElementalX kernel before installing SuperSU. Otherwise you will get bootloop too.
Click to expand...
Click to collapse
I've installed ElementalX Kernel first then I installed SuperSU and I've got a bootloop. I used SuperSU v2.62 and got a bootloop, then I tried with SuperSU v2.74 and also got a bootloop.
Dex5er said:
I've installed ElementalX Kernel first then I installed SuperSU and I've got a bootloop. I used SuperSU v2.62 and got a bootloop, then I tried with SuperSU v2.74 and also got a bootloop.
Click to expand...
Click to collapse
Ok, seems to be the reason. You have to use version 2.79 SR3 or newer if available.
Otherwise it won't work without further modification...
disguisedview said:
Ok, seems to be the reason. You have to use version 2.79 SR3 or newer if available.
Otherwise it won't work without further modification...
Click to expand...
Click to collapse
Alright, is there any problem if I unroot my device with this supersu and root again with the SuperSU that you said, will I get any problem? Do I have to reinstall ElementalX Kernel and twrp again?
Dex5er said:
Alright, is there any problem if I unroot my device with this supersu and root again with the SuperSU that you said, will I get any problem? Do I have to reinstall ElementalX Kernel and twrp again?
Click to expand...
Click to collapse
I don't know. If you have backup of your partitions then flash your original system and boot partition and start from beginning (ElementalX and then SuperSU 2.79 SR3).
If you don't have backups then download (here on xda or somewhere else) stock firmware and flash system und boot partition.
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Asish.pradhan said:
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Click to expand...
Click to collapse
Is it really not working? Or it just doesn't show the popup "TurboPower connected"?
does it work on XT1643 Indian variant ?
---------- Post added at 04:44 PM ---------- Previous post was at 04:40 PM ----------
Asish.pradhan said:
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Click to expand...
Click to collapse
Turbo Power worked fine in my device when using the Ressuruction Rom. Probably restarting the device would solve the issue.
I checked the power input using ampere..its working fine..thnks every1
disguisedview said:
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Code:
SYSTEMLESS=true
So the best is to make sure you don't use an older version of SuperSU than 2.79 SR3!
That's it and it works. SuperSU.apk is going to be installed in step 6.
Successfully tested with XT1642, XT1622 (eta82).
Click to expand...
Click to collapse
Does it work with XT1643 Indian variant ? Please do let me know .
arpith.pr said:
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Does it work with XT1643 Indian variant ? Please do let me know .
Click to expand...
Click to collapse
Nobody confirmed it yet in this thread.
I could it only test with 1642.
But normally i would say it should also work on 1643 variant.
arpith.pr said:
Does it work with XT1643 Indian variant ? Please do let me know .
Click to expand...
Click to collapse
Yes it does work. It is the only way to root stock N on any of the models.
tywinlannister7 said:
Yes it does work. It is the only way to root stock N on any of the models.
Click to expand...
Click to collapse
Thanks
Working on XT1643....
Im making a video on how to do this to make it easier .... For others like me to understand
I can just Reboot to custom recovery, root and then still use my stock recovery?