why is my phone stuck in Odin Mode?
Product Name: SM-A300F
Current Binary: Samsung Official
System Status: Custom
Knox Warranty Void: 0x0
Qualcomm Secureboot: Enable (csb)
RP Swrev: s1, t1, h1, a1, p1
Secure Download: Enable
and there's a big samsung galaxy a3 symbol in the middle of the phone.
Help me quick, Thanks!
catalin23 said:
have you tried to keep volume up -home and power pressed for more than 30 seconds ?
Click to expand...
Click to collapse
Alright now its back to normal, Thanks!
Problem solved.
Thread closed.
Related
Hello,actually i had tried to root my samsung galaxy grand prime by the help of this xda site
http://forum.xda-developers.com/newthread.php?do=postthread&f=1236&nocache=1
BUT!! after completing step 11,my mobile doesn't show the normal screen,instead it shows
THIS
""" Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-G530H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWERV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
Downloading...
Do not turn off target!!"""so i don't know what to do now
SO I MESSED UP PRETTY BAD ACTUALLY!!!:crying::crying:
pls help!!
also i'm an amateur in "mobile rooting" and in mobile things so please tell me step by step what to do!!
Any help will be appreciated!!:good::good:
oops! sorry for putting this question in a wrong thread,i will put this on questions and answers thread!!
Could not do normal boot...ODINI MODE. Downloading...Do not turn off target !!
Hello,actually i had tried to root my samsung galaxy grand prime.
but the screen flashes
""" Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-G530H
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWERV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
Downloading...
Do not turn off target!!"""
so i don't know what to do now
SO I MESSED UP PRETTY BAD ACTUALLY!!!
pls help!!
also i'm an amateur in "mobile rooting" and in mobile things so please tell me step by step what to do!!:crying:
Hi, I have an S3 Neo with CyanogenMod 5.1.1, yesterday I tried to reset it via your phone's settings, it turned on again with a screen depicting the little man Android and the inscription: "Downloading ... Do not turn off target !! ". There is no way to turn it on no 'otherwise, aid
P.S. above are the following messages:
I could not do normal boot
ODIN MODE
PRODUCT NAME: GT-193001
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECURE BOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
XDA Visitor said:
Hi, I have an S3 Neo with CyanogenMod 5.1.1, yesterday I tried to reset it via your phone's settings, it turned on again with a screen depicting the little man Android and the inscription: "Downloading ... Do not turn off target !! ". There is no way to turn it on no 'otherwise, aid
P.S. above are the following messages:
I could not do normal boot
ODIN MODE
PRODUCT NAME: GT-193001
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECURE BOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account and then you may ask your question here:
http://forum.xda-developers.com/galaxy-s3-neo/help
Your device experts are located there and will be able to help.
Good luck!
Im new to andriod, coming from IOS and my friend thought he could root my device and told me it was similar to jailbreak on IOS. After using odin to install twrp and flash SuperSU.zip onto my device, it will not go past the boot screen and has at the top 'Set Warranty Bit : kernel'. I need to get back andriod here is the situation:
No backups
Team win installed on device (If that helps)
Able to access data via computer and Odin can connect but not when it is in downloading mode
I have all my important stuff on a sd card so I was able to recover that
System/bin folder is empty
Samsung Galaxy Tab 2 SM-T719Y
Have downloaded the Firmware
SuperSU root
screen says:
Boot-
Set warrant bit : kernal
Download-
ODIN MODE: (HIGH SPEED)
PRODUCT NAME: SM-T719Y
SYSTEM BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD ENABLE!
download mode!!
I just need Android back, so data loss isn't a worry. How can i do this in simple terms - Im a noob. Please help, im soo screwed other wise.
cryoscalpel said:
Im new to andriod, coming from IOS and my friend thought he could root my device and told me it was similar to jailbreak on IOS. After using odin to install twrp and flash SuperSU.zip onto my device, it will not go past the boot screen and has at the top 'Set Warranty Bit : kernel'. I need to get back andriod here is the situation:
No backups
Team win installed on device (If that helps)
Able to access data via computer and Odin can connect but not when it is in downloading mode
I have all my important stuff on a sd card so I was able to recover that
System/bin folder is empty
Samsung Galaxy Tab 2 SM-T719Y
Have downloaded the Firmware
SuperSU root
screen says:
Boot-
Set warrant bit : kernal
Download-
ODIN MODE: (HIGH SPEED)
PRODUCT NAME: SM-T719Y
SYSTEM BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD ENABLE!
download mode!!
I just need Android back, so data loss isn't a worry. How can i do this in simple terms - Im a noob. Please help, im soo screwed other wise.
Click to expand...
Click to collapse
Odin or Kies might be your only solutions.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
I am one of those long-time phone-upgrade holdouts because of feature deletion.
However yesterday I went to start waze and the phone crashed, and wouldn't get past the sprint logo.
In trying to recovery mode boot,
"Could not do normal boot.
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: SM-G900P
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANT VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, R1, A3, P1
SECURE DOWNLOAD : ENABLE
UDC START"
I attempted to load Philz but that was also a failure; I'm wondering if it has to do with the poor solder connection between the emmc chip and the board?
Could it be a corrupt firmware issue?
I was able to download the G900PVPS3CQD1_G900PSPT3CQD1_SPR firmware, but I'm unsure how to use it in Odin to update the firmware without hosing some of the data that might be on the phone still. I don't want to completely wreck the files if it can be saved.
Any ideas/suggestions?
100% Fix for 'mmc_read failed' error in Samsung Galaxy Note 4 and other devices
AndroidForRookie is a blog to reveal the hidden tips and tricks which makes android phones work more efficient with less battery drain and more speed
androidforrookie.blogspot.com
You have a hardware issue my friend.
dave678 said:
You have a hardware issue my friend.
Click to expand...
Click to collapse
Do you think that if I either got the chip reballed/reflowed or a pressure pad put on it that it would be sufficient to get anything off of the phone before it's toast?
Did you read my link?
i bought a second hand gear sport in stuck on factory mode it's only turn on when charging and it doesnt show up in odin3. and it's getting hot when charging how can i get in odin mode and fix it (sorry my english im from turkey)
FACTORY MODE
PRODUCT NAME: SM-R600
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS:OFFİCAL
REACTIVATION LOCK: OFF
SECURE DOWNLOAD: ENABLED
WARRANTY VOID: 1(0X0000)
AP SWREV: B:1 K:0 S:0