Im new to andriod, coming from IOS and my friend thought he could root my device and told me it was similar to jailbreak on IOS. After using odin to install twrp and flash SuperSU.zip onto my device, it will not go past the boot screen and has at the top 'Set Warranty Bit : kernel'. I need to get back andriod here is the situation:
No backups
Team win installed on device (If that helps)
Able to access data via computer and Odin can connect but not when it is in downloading mode
I have all my important stuff on a sd card so I was able to recover that
System/bin folder is empty
Samsung Galaxy Tab 2 SM-T719Y
Have downloaded the Firmware
SuperSU root
screen says:
Boot-
Set warrant bit : kernal
Download-
ODIN MODE: (HIGH SPEED)
PRODUCT NAME: SM-T719Y
SYSTEM BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD ENABLE!
download mode!!
I just need Android back, so data loss isn't a worry. How can i do this in simple terms - Im a noob. Please help, im soo screwed other wise.
cryoscalpel said:
Im new to andriod, coming from IOS and my friend thought he could root my device and told me it was similar to jailbreak on IOS. After using odin to install twrp and flash SuperSU.zip onto my device, it will not go past the boot screen and has at the top 'Set Warranty Bit : kernel'. I need to get back andriod here is the situation:
No backups
Team win installed on device (If that helps)
Able to access data via computer and Odin can connect but not when it is in downloading mode
I have all my important stuff on a sd card so I was able to recover that
System/bin folder is empty
Samsung Galaxy Tab 2 SM-T719Y
Have downloaded the Firmware
SuperSU root
screen says:
Boot-
Set warrant bit : kernal
Download-
ODIN MODE: (HIGH SPEED)
PRODUCT NAME: SM-T719Y
SYSTEM BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD ENABLE!
download mode!!
I just need Android back, so data loss isn't a worry. How can i do this in simple terms - Im a noob. Please help, im soo screwed other wise.
Click to expand...
Click to collapse
Odin or Kies might be your only solutions.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Related
Hello,actually i had tried to root my samsung galaxy grand prime by the help of this xda site
http://forum.xda-developers.com/newthread.php?do=postthread&f=1236&nocache=1
BUT!! after completing step 11,my mobile doesn't show the normal screen,instead it shows
THIS
""" Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-G530H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWERV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
Downloading...
Do not turn off target!!"""so i don't know what to do now
SO I MESSED UP PRETTY BAD ACTUALLY!!!:crying::crying:
pls help!!
also i'm an amateur in "mobile rooting" and in mobile things so please tell me step by step what to do!!
Any help will be appreciated!!:good::good:
oops! sorry for putting this question in a wrong thread,i will put this on questions and answers thread!!
Could not do normal boot...ODINI MODE. Downloading...Do not turn off target !!
Hello,actually i had tried to root my samsung galaxy grand prime.
but the screen flashes
""" Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-G530H
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWERV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
Downloading...
Do not turn off target!!"""
so i don't know what to do now
SO I MESSED UP PRETTY BAD ACTUALLY!!!
pls help!!
also i'm an amateur in "mobile rooting" and in mobile things so please tell me step by step what to do!!:crying:
I made the change from Apple to Droid this weekend, and without fail I managed to brick my Note5. I believe the issue is that after I used Odin to root it, i removed my Google account to disable the FRP lock. I then installed TWRP but it wouldn't work using Play Store. So I stupidly readded my google account info then rebooted and now I am bricked. I am using Odin to install the Stock firmware but it doesn't seem to be doing anything.
My phone is in download mode and on the upper left corner are the following items
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N920T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0301) - I know warranty voided
RP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIL DEVICE:2, BINARY: 1
Any help would be greatly appreciated!
Things that I have tried:
wipe/factory settings
wipe cache
Also, I never enabled USB Debugging mode as I could not find it on here, it seems that the FRP lock is really screwing me over.....
Since Pokemon Go is so popular, I wanted to use the app on my Samsung Galaxy Grand 2 LTE SM-G7105. The problem is, the version is still on jelly bean 4.3. I have been trying to update my phone to at least KitKat. I know how to flash recovery on odin or update with roms, but it turns out...
1. I cannot update my phone because it requires signature verification.
2. I know I can fix this by flashing a stock recovery but when I try to flash cwm through odin and i did the power+vol up+home it could not get into recovery, instead it could not do a normal boot and was in odin mode
When I do power+vol up+home, it shows
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-G7105
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE (CSB)
Warranty Bit: 1
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: Enable
Then the Android figure with Downloading... and Do not turn off target!!
How do I get rid of signature verification and make this odin mode go away? Someone please help me. I really want to play the game on my phone and my parents do not want buy a new phone for me :crying:
Also, I used King Root for my Samsung Galaxy Note GT-N7000 to upgrade it to lollipop 5.0.1. Do you think that using King Root can help me update my phone? I do not know how to root with supersu and I know it is the best rooting process but I cannot do that because it still has signature verification enabled
I am also kind of a noob with these things, please do tell me what I did wrong and provide websites that I can use :good::good::good:
I've been trying to root my A3 as I want to be able to enable adoptable storage. I've been bitten by the various protection methods and now the phone won't boot as I get a green screen with a white triangle and the text:
An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I'm trying to use Odin to flash the standard image but I don't appear to have found the right one as Odin fails after a few seconds and the following is shown on the phone download screen:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-A320FL
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
CCIC =
WARRANTY VOID : 1 (0x0500)
AP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1 <--- This line appears after running the flash
Can someone tell me where to find the standard ROM or how I can fix the phone in it's current state.
Thanks,
Steve.
How to restore the standard firmware
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
I am one of those long-time phone-upgrade holdouts because of feature deletion.
However yesterday I went to start waze and the phone crashed, and wouldn't get past the sprint logo.
In trying to recovery mode boot,
"Could not do normal boot.
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: SM-G900P
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANT VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, R1, A3, P1
SECURE DOWNLOAD : ENABLE
UDC START"
I attempted to load Philz but that was also a failure; I'm wondering if it has to do with the poor solder connection between the emmc chip and the board?
Could it be a corrupt firmware issue?
I was able to download the G900PVPS3CQD1_G900PSPT3CQD1_SPR firmware, but I'm unsure how to use it in Odin to update the firmware without hosing some of the data that might be on the phone still. I don't want to completely wreck the files if it can be saved.
Any ideas/suggestions?
100% Fix for 'mmc_read failed' error in Samsung Galaxy Note 4 and other devices
AndroidForRookie is a blog to reveal the hidden tips and tricks which makes android phones work more efficient with less battery drain and more speed
androidforrookie.blogspot.com
You have a hardware issue my friend.
dave678 said:
You have a hardware issue my friend.
Click to expand...
Click to collapse
Do you think that if I either got the chip reballed/reflowed or a pressure pad put on it that it would be sufficient to get anything off of the phone before it's toast?
Did you read my link?