Various Media Updated, Marshmallow Boot Animation, Volume Increase - AT&T Samsung Galaxy S 4 General

Various Media Updates, Marshmallow Boot Animation, Volume Increase
Pre-Requisites:
1) Tested only on i337 32GB OC4 DeOdexed ROM
2) Phone must be rooted
3) Phone must have FlashFire Installed on it
Instructions to Install:
1) Download the attached AllMediaUpdates_I337_OC4DeOdexedStockROM_v1.0.zip file
2) Place it in /sdcard (basically internal memory)
3) Open Flashfire
4) Click on "+" sign and select "Flash ZIP or OTA" and browse and select AllMediaUpdates_I337_OC4DeOdexedStockROM_v1.0.zip file
5) Now in the next window let the "Auto-mount" option UNCHECKED and click on tick mark on top right corner
6) Set EverRoot to "disabled"
7) Set Reboot to "Normal"
8) Now click on the thunderbolt and flash the package...
If all is followed properly and your phone meets the pre-requisites then following will be done on file installation:
1) Boot animation will be changed from default AT&T to Marshmallow
2) Many more ringtones, notification tones, alarm tones, ui tones will be added
3) Volume for all above will be increased by 33% - system level change will be applied
4) Many more wallpapers will be added check your /sdcard/wallpaper folder
5) Many more lockscreen wallpapers will be added check your /sdcard/lockscreen folder
Hope you all enjoy it.....

Related

[Q] ics rom with stock kernel on x8

can cm9 be flashed with stock kernel on x8 without bricking the phone.
ICS
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
i don't think that rom is for stock kenel .
i am myself said:
i don't think that rom is for stock kenel .
Click to expand...
Click to collapse
can u please tell any rom which uses stock kernel
thanks
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
thanks bosss
CWM backup ROM
Hi all,
I have rooted my Lenovo ThinkPad tablet and installed CWM by instructions in there http://forum.xda-developers.com/showthread.php?t=1831161 ...I wanted to flash to Cyanogenmod10, but before it I wanted to backup original ROM. And my problem is - there is no "Backup & restore" option in CWM's boot menu...where could be a mistake?

LiquidSmooth ROM for Qmobile Noir A8

i am not responsible if you damage your phone in any way.
This is your own desicion and if you make a mistake and blame me for it.
I will laugh at you and i will laugh hard. Enjoy
HERE ARE THE TWEAKS FOR THE ROM
60 fps
full cpu/gpu utilization
zipaligned all apks for better ram optimization
busybox added
inti.d support added
build.prop tweaks
net speed tweaks
faster gps lock
xposed framework added for dual panel mode
viper4android for amazing sound
xtheme engine added (similar to the theme engine found on cyanogenmod)
kernel tweaks
better deep sleep mode
faster internet
touch quality improved
scrolling speed improved
extremely smooth
no lag in UI
most unique ROM​
Download ROM from HERE
CREDITS
VIPER4ANDROID-ZHUHANG
XPOSED FRAMEWORK-ROVO89
XTHEME ENGINE-mcsqwizzys98
BASE ROM-WINGOKU​
Wingoku's website: http://wingoku.blogspot.com/
Reserved for patches
HOW TO FLASH ROM
1) Download Rom Zip File from the Link Above
2) Put into External/Internal SD Card
3) Go To CMW/TWRP/LEWA Recovery
4) Wipe Data/Factory Reset
5) Go to 'Mounts and Storage' and Format System
6) Select 'Install zip From Sdcard' and choose the Rom Zip File
7) Select Yes and The Installation will Start
8) Reboot Phone after Installation is Complete
9) Put Information & Complete Setup Wizard
10) Open 'Xposed Installer' from App Drawer
11) Select 'Install/Update' and close the App
12) Open 'Viper4AudioFX' from App Drawer
13) Follow Steps to Install Viper given BELOW
14) Go to Recovery Again
15) Fix Permissions and Wipe Dalvik Cache from Advanced Menu
16) Reboot the Phone​
How to Use ViPER Audio Engine:
-Open 'ViPER4AndroidFX' from App Drawer
-Select "Yes" Option for Installing Drivers
-Choose CPU as 'Cortex A8 with NEON'
-The Driver's Will Install
-Reboot the Phone
-Open the Application Again
-Tick Mark the option of Enabling ViPER Engine
-Do Same for Headset & Bluetooth Mode
-Set other Sound Options
-Enjoy Amazing Audio Quality
HOW TO USE XTHEME ENGINE:
Just follow these steps carefully:
-Download the Apk and install it in your phone.
https://www.dropbox.com/s/3ciz2clswmxa6i7/XThemeEngine_beta5.apk
- After installing, open Xposed Installer app and from modules section...tick mark the theme engine app
- Reboot the Phone
- Install theme apk files...the ones you like... (links given below)
- Open the Theme Engine App
-Select the theme you installed
- Reboot and Enjoy
Thread from which you can get themes:
http://forum.xda-developers.com/showthread.php?t=2219999
reserved for screenshots
Screenshots coming soon
Waiting for screen shots.
My friend owns A8 and I'm sure that it will be good for him.
nathanjp said:
HOW TO FLASH ROM
1) Download Rom Zip File from the Link Above
2) Put into External/Internal SD Card
3) Go To CMW/TWRP/LEWA Recovery
4) Wipe Data/Factory Reset
5) Go to 'Mounts and Storage' and Format System
6) Select 'Install zip From Sdcard' and choose the Rom Zip File
7) Select Yes and The Installation will Start
8) Reboot Phone after Installation is Complete
9) Put Information & Complete Setup Wizard
10) Open 'Xposed Installer' from App Drawer
11) Select 'Install/Update' and close the App
12) Open 'Viper4AudioFX' from App Drawer
13) Follow Steps to Install Viper given BELOW
14) Go to Recovery Again
15) Fix Permissions and Wipe Dalvik Cache from Advanced Menu
16) Reboot the Phone​
How to Use ViPER Audio Engine:
-Open 'ViPER4AndroidFX' from App Drawer
-Select "Yes" Option for Installing Drivers
-Choose CPU as 'Cortex A8 with NEON'
-The Driver's Will Install
-Reboot the Phone
-Open the Application Again
-Tick Mark the option of Enabling ViPER Engine
-Do Same for Headset & Bluetooth Mode
-Set other Sound Options
-Enjoy Amazing Audio Quality
HOW TO USE XTHEME ENGINE:
Just follow these steps carefully:
-Download the Apk and install it in your phone.
https://www.dropbox.com/s/3ciz2clswmxa6i7/XThemeEngine_beta5.apk
- After installing, open Xposed Installer app and from modules section...tick mark the theme engine app
- Reboot the Phone
- Install theme apk files...the ones you like... (links given below)
- Open the Theme Engine App
-Select the theme you installed
- Reboot and Enjoy
Thread from which you can get themes:
http://forum.xda-developers.com/showthread.php?t=2219999
Click to expand...
Click to collapse
Unable to install Status 7 Error on CWM Recovery

5-Way Extended Reboot for OC4 Stock DeOdexed ROM

5-Way Extended Reboot for OC4 Stock DeOdexed ROM
Check the attached Image for Screenshot of what happens after you install
Pre-Requisites:
1) Tested only on i337 32GB OC4 DeOdexed ROM
2) Phone must be rooted
3) Phone must have FlashFire Installed on it
Instructions to Install:
1) Download the attached RebootOptions_I337_OC4DeOdexedStockROM_v1.0.zip file
2) Place it in /sdcard (basically internal memory)
3) Open Flashfire
4) Click on "+" sign and select "Flash ZIP or OTA" and browse and select RebootOptions_I337_OC4DeOdexedStockROM_v1.0.zip file
5) Now in the next window let the "Auto-mount" option UNCHECKED and click on tick mark on top right corner
6) Set EverRoot to "disabled"
7) Set Reboot to "Normal"
8) Now click on the thunderbolt and flash the package...
If all is followed properly and your phone meets the pre-requisites then when you click reboot on power menu you will now see extended 5-Way Reboot menu....
Hope you all enjoy it....
Sincerely,

3MinitBattery for OC4 Stock DeOdexed ROM

3MinitBattery for OC4 Stock DeOdexed ROM
Check the attached Image for Screenshot of what happens after you install
Pre-Requisites:
1) Tested only on i337 32GB OC4 DeOdexed ROM
2) Phone must be rooted
3) Phone must have FlashFire Installed on it
Instructions to Install:
1) Download the attached 3MinitBattery_I337_OC4DeOdexedStockROM_v1.0.zip file
2) Place it in /sdcard (basically internal memory)
3) Open Flashfire
4) Click on "+" sign and select "Flash ZIP or OTA" and browse and select 3MinitBattery_I337_OC4DeOdexedStockROM_v1.0.zip file
5) Now in the next window let the "Auto-mount" option UNCHECKED and click on tick mark on top right corner
6) Set EverRoot to "disabled"
7) Set Reboot to "Normal"
8) Now click on the thunderbolt and flash the package...
If all is followed properly and your phone meets the pre-requisites then you can open the 3minit app that will be installed and change the battery icons to your wish....
Hope you all enjoy it....

How to unlock pattern lock in any android one device with marshmellow

Flash Aroma Filemaneger ZIP via CWM and ByPass Pattern lock screen only for marshmellow device
1) Download the Aroma Filemaneger zip file from link
2) Move that zip file to the SDcard of your phone using a card reader.
3) Now insert that SDcard to you phone.
4) Reboot your phone into recovery mode (For this first switch of your phone and then keep pressing Volume Up+Home+Power button till recovery screen appear.)
5) Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above link
6) In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.
7) Go to bottom n select “mount all partition in start up ” then exit from aroma file manger
8) Now after exit , re-update that aroma file again and it will open again.
9) Go to data -- and then System (/data/system)Then find locksettings.db, locksettings.db-shm, locksettings.db-wal. choose delete and delete that file and restart.
its don:good:
--------------------DOWNLOAD LINKS------------------
AROMA FILEMANAGER :-http://forum.xda-developers.com/showthread.php?t=1646108

Categories

Resources