Database Info

[Q] ics rom with stock kernel on x8

can cm9 be flashed with stock kernel on x8 without bricking the phone.

ICS
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------

muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
i don't think that rom is for stock kenel .

i am myself said:
i don't think that rom is for stock kenel .
Click to expand...
Click to collapse
can u please tell any rom which uses stock kernel

thanks
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
thanks bosss

CWM backup ROM
Hi all,
I have rooted my Lenovo ThinkPad tablet and installed CWM by instructions in there http://forum.xda-developers.com/showthread.php?t=1831161 ...I wanted to flash to Cyanogenmod10, but before it I wanted to backup original ROM. And my problem is - there is no "Backup & restore" option in CWM's boot menu...where could be a mistake?

[GUIDE][i9500][ROOT]Root Device with System Status: OFFICIAL

You will void your warranty
Follow this at your own risk
Please Note: Only System status will be official! Binary Status will be custom and Warranty Bit will be 1
Files Needed:
Odin3 v1.85: http://dl.xda-developers.com/attach...95c5ae8a/52c004eb/5/8/1/9/1/3/Odin3-v1.85.zip
Philz Recovery: http://d-h.st/E7g (thanks to @Phil3759)
Adam Kernel: http://server01.xdafileserver.nl/in...5/&download=GT-I9500_Adam_Kernel.V3.5.CWM.zip (thanks to @wanam)
Procedure:
1. Put your phone into download mode (Power+Volume Down+Home Buttom)
2. Open odin3 and connect your phone to the computer
3. Wait till you see the ID:COM become yellow (if not install the latest USB drivers)
4. Tick PDA and select the philz .tar.md5 for it
5. Make sure only Auto rebot and F Reset Time are ticked
6. Hit Start and wait for a few seconds till the phone boots up
7. Copy adam kernel.zip to your internal sd card
8. Turn off your phone and boot into recovery (volume up+power+home button)
9. Go to install zip and select adam kernal and click yes
10. Reboot the device after its done
Ta Da! You now have root access
To Regain Official Status (Binary Status: Custom, System Status: Offiial, Warranty Bit: 1) :
1. Download and install Xposed Framework: http://dl.xposed.info/latest.apk
2. Open it, go to framework, install it and reboot
3. Download Wanam Xposed: https://play.google.com/store/apps/details?id=ma.wanam.xposed
4. Open xposed, go to modules and tick Wanam Xposed
5. Reboot device
6. Open Wanam Xposed (from the app drawer or the xposed app)
7. Go to security hacks and tick "Fake system status"
8. Reboot your device
You now have a device with Root access and official status
If you want to remove knox apps, flash this script in Philz: http://dl.xda-developers.com/attach.../9/9/0/Degrated_Shadow's_KNOX_removerV2.1.zip (thanks to @Degrated Shadow)
Proof:

Very nice !

This works on custom roms?
And will this give official updates on stock rooted?
Sent from my DEATH NOTE with SHINIGAMI by my side!

You have to revert back to stock recovery if you want OTA! Cauz custom recoveries cannot install Samsung ota packages
Sent from my GT-I9500 using XDA Premium 4 mobile app

3MinitBattery for OC4 Stock DeOdexed ROM

3MinitBattery for OC4 Stock DeOdexed ROM
Check the attached Image for Screenshot of what happens after you install
Pre-Requisites:
1) Tested only on i337 32GB OC4 DeOdexed ROM
2) Phone must be rooted
3) Phone must have FlashFire Installed on it
Instructions to Install:
1) Download the attached 3MinitBattery_I337_OC4DeOdexedStockROM_v1.0.zip file
2) Place it in /sdcard (basically internal memory)
3) Open Flashfire
4) Click on "+" sign and select "Flash ZIP or OTA" and browse and select 3MinitBattery_I337_OC4DeOdexedStockROM_v1.0.zip file
5) Now in the next window let the "Auto-mount" option UNCHECKED and click on tick mark on top right corner
6) Set EverRoot to "disabled"
7) Set Reboot to "Normal"
8) Now click on the thunderbolt and flash the package...
If all is followed properly and your phone meets the pre-requisites then you can open the 3minit app that will be installed and change the battery icons to your wish....
Hope you all enjoy it....

Various Media Updated, Marshmallow Boot Animation, Volume Increase

Various Media Updates, Marshmallow Boot Animation, Volume Increase
Pre-Requisites:
1) Tested only on i337 32GB OC4 DeOdexed ROM
2) Phone must be rooted
3) Phone must have FlashFire Installed on it
Instructions to Install:
1) Download the attached AllMediaUpdates_I337_OC4DeOdexedStockROM_v1.0.zip file
2) Place it in /sdcard (basically internal memory)
3) Open Flashfire
4) Click on "+" sign and select "Flash ZIP or OTA" and browse and select AllMediaUpdates_I337_OC4DeOdexedStockROM_v1.0.zip file
5) Now in the next window let the "Auto-mount" option UNCHECKED and click on tick mark on top right corner
6) Set EverRoot to "disabled"
7) Set Reboot to "Normal"
8) Now click on the thunderbolt and flash the package...
If all is followed properly and your phone meets the pre-requisites then following will be done on file installation:
1) Boot animation will be changed from default AT&T to Marshmallow
2) Many more ringtones, notification tones, alarm tones, ui tones will be added
3) Volume for all above will be increased by 33% - system level change will be applied
4) Many more wallpapers will be added check your /sdcard/wallpaper folder
5) Many more lockscreen wallpapers will be added check your /sdcard/lockscreen folder
Hope you all enjoy it.....

[GUIDE] Installing XPOSED on Galaxy S4 SGH-1337M (2017) (WITH PICTURES)

THIS GUIDE IS ONLY FOR GALAXY S4 SGH-1337M
Guide made on 2017-03-12
I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU DO TO YOUR PHONE!
PERFORMING THIS WILL MAKE YOUR WARRANTY GO AWAY!
LEAVE A THANKS IF IT WORKS
This guide is split up into four parts meaning that if you just want to root your phone or just want to restore to stock then you can YOU CAN NOT INSTALL XPOSED WITHOUT ROOTING AND GETTING STOCK FIRST!
Welcome to my guide on how to install XPOSED on the Samsung Galaxy S4 (SGH-1337M) this guide is strictly for the SGH-1337M the reason I made this was because I spent a lot of hours trying to put parts of threads together since no one had specifically made a guide that was simple and noob friendly for installing XPOSED. Another reason is some people feel uncomfortable following guides made for the SGH-1337 mainly because it is different from the SGH-1337M. Another reason was I found no updated 2016/2017 guides for it. Follow every part step by step or you may risk losing your phone.
Also make sure you backup anything that isn't synced with Google that you want to keep, photos, music, contacts. This will delete all data on the phone.
This guide will be split up into four parts:
-Stock
-Root
-ROM that is needed
-Installing XPOSED
Requirements:
-A PC
-Internet
-Samsung Galaxy S4 SGH-1337M
-USB Cable
-SD Card with at least three free GB on it.
Stock Firmware
BEFORE YOU BEGIN (IMPORTANT)
1. Power off device
2. Boot into the stock recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Now you may begin
1. Download the latest stock firmware from sammobile for your device from make sure it is for 5.0.1:
-https://www.sammobile.com/firmwares/database/SGH-I337M/
2. Extract the .zip after you finish downloading
3. Download ODIN v.3.12.3
-Attachment at bottom of thread.
4. Extract the .zip to get the ODIN program.
5. Turn your device off.
6. Boot into download mode by holding Power Button+Volume Down Button
7. When it gives warning press the Volume Up Button
8. Connect device to PC using USB cable.
9. Run ODIN as administrator
10. Your ODIN screen should look like this now:
-http://prntscr.com/ej6hrl
Note: Where it says [0:COM8] The 8 can be any number.
11. Click AP and find the .md5 file you extracted from the stock firmware .zip from earlier.
Note: It is normal for ODIN to freeze while checking the file don't panic and don't close out.
12. On the left hand side where it says options copy down these settings
-http://prntscr.com/ej6ivi
13. When you are done all that it should look like this:
-http://prntscr.com/ej6jmz
Note: My .md5 file or binary size won't look exactly like yours don't panic.
14. Click start
15. It will take a while just be patient and wait, mine took about 10-15 minutes yours might take longer. It should look like this when done and it should reboot automatically:
-http://prntscr.com/ej6nq9
Note: First boot may take a while be patient.
16. Quickly go through setup it doesn't matter what you choose because this isn't the final product.
17. As soon as you finish setup head over to Settings.
18.Go to "More" and click Security
19. Check Unknown Sources
20. Go back to "More"
21. Go to About Device
22. Tap the Build Number until it says developer options enabled.
23. Go back to "More"
24. Go to Developer options
25. Check USB Debugging
26. Turn phone off.
Rooting The Device
1. Download CF-Auto-Root.zip
-http://download.chainfire.eu/327/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip
2. Extract the .zip
3. Boot into Download Mode.
4. Connect Device to PC
5. Run ODIN as administrator
6. Your ODIN screen should look like this now:
-http://prntscr.com/ej6hrl
Note: Where it says [0:COM8] The 8 can be any number.
7. Click AP and click the CF-Auto-Root .md5 file that you downloaded
8. On the left hand side where it says options copy down these settings
-http://prntscr.com/ej6ivi
9. When you are done all that it should look like this:
-http://prntscr.com/ej779o
10. Click Start
11. It should look like this when done and it should reboot automatically:
-http://prntscr.com/ej77ok
Note: First boot may take a while be patient.
12. When it starts go to Play Store sign in and download Root Checker by joeykrim
13. Open the app and make sure the phone is rooted
Note: When you click "Check for root" it will ask for SuperUser permission you have 15 seconds to click grant otheriwse it will show wrong results.
14. If it isn't repeat this process again
15. Turn phone off.
Custom ROM that is needed.
General Information:
-Basically XPOSED requires a deodexed firmware and when I wanted to get it I didn't know how to deodex my firmware so instead I found a custom ROM which is very popular and extremely good that has a deodexed firmware.
We can do this two ways, but first we must do this.
1. Power off device
2. Boot into the stock recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Method 1 Downloading ROM using PC then transferring to SD Card
1. Download the GoldenEye ROM from here
-https://www.androidfilehost.com/?fid=23991606952595353
2. Do not extract the .zip
3. Transfer .zip onto SD Card
4. Put SD card into phone
5. Boot phone and go through setup
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the GoldenEye ROM from your SD card and install
21. It will start the Aroma installer click 1337M at device selection after you agree to terms.
22. Select GoldenEye Full
23. Go through the rest of the installer choosing your options that you prefer
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic for me it took around 15-20 minutes it might take longer for you.
Method 2 Downloading ROM using Device then transferring to SD Card
1. Boot Phone
2. Go through setup
3. Download the GoldenEye ROM from here using any browser from the Play Store
-https://www.androidfilehost.com/?fid=23991606952595353
4. Do not extract the .zip
5. Move .zip onto sd card using any file manager found on Play Store
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the GoldenEye ROM from your SD card and install
21. It will start the Aroma installer click 1337M at device selection after you agree to terms.
22. Select GoldenEye Full
23. Go through the rest of the installer choosing your options that you prefer
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic for me it took around 15-20 minutes it might take longer for you.
Installing XPOSED
We can do this two ways, but first we must do this.
1. Power off device
2. Boot into the stock recovery or CWM recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Method 1 Downloading XPOSED using PC then transferring to SD Card
1. Download the XPOSED Framework and .apk installer from here
XPOSED Framework
-https://www.dropbox.com/s/taywsnvw994uvha/xposed-v86.2-samsung-5.0.x-sdk21-by-dkcldark-arm.zip?dl=1
XPOSED Installer
-Attached at bottom of thread
2. Do not extract the .zip
3. Transfer .zip and .apk onto SD Card
4. Put SD card into phone
5. Boot phone and go through setup
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the XPOSED Framwork from your SD card and install
21. It will start the installing
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic.
25. Go through setup process and then install the .apk from the SD card by clicking it using any file manager.
26. It will install
Final
We have finally finished installing XPOSED it was a long process but it was worth it.

Going to be doing some major updates to the steps stay tuned.