OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F - Samsung Galaxy S7 Edge Guides, News, & Discussion

In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy S7Edge (so: NO CUSTOM ROM's and/or ROOT-talk)...
Discussions about battery life and/or drain, can be found overhere:
How many of you experiencing high android system battery drain?
Post your Battery life!!!
How to flash firmware to your phone:
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.12.7
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.12.7
5. Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Connect phone and wait until you get a blue sign in Odin
7. Add the firmware files to their designated slots
8. Make sure re-partition is NOT ticked
9. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
The main file, is made for the Netherlands (CSC=PHN).
If you have another CSC, i.e. SEB (Baltic):
1. download the MAIN-file and extract AP BL & CP
2. download the latest firmware for your country, and extract the HOME_CSC of your country
3. Place the extracted files (including YOUR HOME_CSC in the designated slots of Odin)

Latest Firmware Netherlands - PHN
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is the latest ROM for Netherlands (PHN) released 31 may 17, and made it compatible for the Netherlands (PHN).
This is official Samsung ROM, so KNOX won't be triggered!
Your data will stay intact, but it's possible you get "com.android.***** has stopped" -> Then a Factory Reset is needed (in Recovery)!
What's new:
* Android 7.0
* May security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G935F
Model name Galaxy S7 edge
Country Netherlands
Version Android 7.0
Changelist 11104523
Build date Tue, 16 May 2017 06:11:50 +0000
Security Patch Level 2017-05-01
Product code PHN
PDA G935FXXU1DQEF
CSC G935FPHN1DQD1
Download for install with Odin 3.12.7: MegaNZ
UN-RAR the archive and place the files in the designated slots in Odin 3.12.7
This package contains the HOME_CSC of the Netherlands (PHN); if you want the HOME_CSC of your own country/region, download the latest firmware of your country/region and extract the HOME_CSC which you can use with the BL AP & CP of the main package!

Thanks - do I change the zip extension to tar? Because when it extracts it extracts 5 separate files??x

Damn I can't find mine anywhere yet.
Sent from my SM-G935F using Tapatalk

poczynek said:
Thanks - do I change the zip extension to tar? Because when it extracts it extracts 5 separate files??x
Click to expand...
Click to collapse
Just found out: it's under investigation...

Does flashing this with odin trip knox or reset phone?

pnda said:
Does flashing this with odin trip knox or reset phone?
Click to expand...
Click to collapse
No.. Using odin doesn't trip knox or reset your phone.

SM-G935FD Firmware ?

salman_sharif said:
SM-G935FD Firmware ?
Click to expand...
Click to collapse
+1 / Any link for G935FD Roms ?

how we flash this?

henklbr said:
Model SM-G935F
Model name Galaxy S7 edge
Country Netherlands
Version Android 6.0.1
Changelist 7211170
Build date Thu, 25 Feb 2016 07:55:59 +0000
Product code PHN
PDA G935FXXU1APBF
CSC G935FPHN1APBD
Download for install with Odin: MegaNZ
Click to expand...
Click to collapse
Does this version fix the oversensitiv touchscreen?

once we extract the files there are a BL, AP, CP and 2 CSC files. Is it as easy as open each one on their respective odin line? or we should flash first the BL then the others

Model: SM-G935F
Name: Galaxy S7 edge
Country: Germany
Version: Android 6.0.1
Build Date: 29 Feb 2016
Product Code: DBT
PDA: G935FXXU1APAW
CSC: G935FDBT1APB1
Download from AndroidFileHost

SoLdieR9312 said:
Model: SM-G935F
Name: Galaxy S7 edge
Country: Germany
Version: Android 6.0.1
Build Date: 29 Feb 2016
Product Code: DBT
PDA: G935FXXU1APAW
CSC: G935FDBT1APB1
Download from AndroidFileHost
Click to expand...
Click to collapse
Can you post softwareinfo in settings screenshot? From where you get it?

m3dd0g said:
Can you post softwareinfo in settings screenshot? From where you get it?
Click to expand...
Click to collapse
Added to my post. I've downloaded via Kies.

SoLdieR9312 said:
Added to my post. I've downloaded via Kies.
Click to expand...
Click to collapse
That an old build from 29 Jan.

m3dd0g said:
That an old build from 29 Jan.
Click to expand...
Click to collapse
Its the latest for dbt. No software updates yet. And its from 29, Feb.

do you already know how to flash them? i want to debrand my phone

Where to find G935FD INDIAN FIRMWARE. Please help me.

G935FXXU1APC8 (Netherlands - PHN)
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* March security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G935F
Model name Galaxy S7 edge
Country Netherlands
Version Android 6.0.1
Changelist 7211170
Build date Mon, 14 Mar 2016 15:03:53 +0000
Product code PHN
PDA G935FXXU1APC8
CSC G935FPHN1APBD
Download for install with Odin 3.10.7: MegaNZ
UN-RAR the archive and place the files in the designated slots in Odin 3.10.7

Related

[GT-I9500-Factory-Firmware]

GT-I9500XXUAMDK_SER_FACTORY​
Composition zip:
Cache(CSC)
Bootloader
PDA
MODEM
ODIN 3.07
PIT
Automatic FULL WIPE!!!​
https://hotfile.com/dl/225970855/5ff69d0/I9500XXUAMDK_MULTI_SER_FACTORY.zip.html
**********************************************************************************************************************
GT-I9500XXUBMF3_SER_FACTORY
Automatic FULL WIPE!!!​
https://hotfile.com/dl/227628227/1ce0462/4x-XXUBMF3_FULL_WIPE_SER.zip.htm
Warning!!!
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - SER default
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
893x657(104.13 kB)
хостинг изображений
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MBC-I9500XXUAMDK-CACHE-FULL-WIPE
https://hotfile.com/dl/226105798/e4489fb/MBC-I9500XXUAMDK-CACHE-FULL-WIPE.zip.html
After flash you will have clean device (factory condition) CSC - MBC default
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I9500UBUBMF3_ FACTORY_FIRMWARE_TTT
Automatic FULL WIPE!!!​
Warning!!!
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - TTT default
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
[*]Region: TTT;PCI;PCW;PEO;TDR;TPA;EON;UPO
Download
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
4F_I9500XXUBMF8_SER_FACTORY_FIRMWARE
Automatic FULL WIPE!!!​
Warning!!!
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - SER default
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
4F_I9500XXUBMG1_SEK_FACTORY_FIRMWARE
Automatic FULL WIPE!!!​
Warning!!!
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - SEK default
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
Regions-SEK;SKZ;CAC.
Composition zip:
CSC
Bootloader
PDA
PHONE
ODIN 3.09(MOD)
PIT
Download
Special thank & big respect
as i9000
Chainfire
boar-hooligan- user 4pda (MOD ODIN3)
if you make a mirror without my permission, I will not lay out more firmware!
Coolio
Sent from my LG-LS970 using xda app-developers app
delete it
and no download link?
dell
ready
alexyuh said:
GT-I9500XXUAMDK_MULTI_SER_FACTORY​
Composition zip:
Cache(CSC)
Bootloader
PDA
MODEM
ODIN 3.07
PIT
Automatic FULL WIPE!!!​
https://hotfile.com/dl/225970855/5ff69d0/I9500XXUAMDK_MULTI_SER_FACTORY.zip.html
Warning!!!
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - SER default
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
Special thank & big respect
as i9000
Click to expand...
Click to collapse
Will this Reset the Binary counter as well?
matrix.bharath said:
Will this Reset the Binary counter as well?
Click to expand...
Click to collapse
I don't know.
@alexyuh
You have probably saved my life with your rom full wipe! After have flashed your multi ser factory, my problem described here:
http://forum.xda-developers.com/showpost.php?p=42331081&postcount=336
disappeared!! Now the red led work correctly! And no random reboot/shutdown for now.
Thank You!!
Thank you!
cyberz said:
@alexyuh
You have probably saved my life with your rom full wipe! After have flashed your multi ser factory, my problem described here:
http://forum.xda-developers.com/showpost.php?p=42331081&postcount=336
disappeared!! Now the red led work correctly! And no random reboot/shutdown for now.
Thank You!!
Click to expand...
Click to collapse
Did it also Reset the Binary Counter?
My binary counter is 0, because I have always flashed original rom with Odin. Sorry, can not help you.
Update
MBC-I9500XXUAMDK-CACHE-FULL-WIPE
https://hotfile.com/dl/226105798/e4489fb/MBC-I9500XXUAMDK-CACHE-FULL-WIPE.zip.html
alexyuh said:
MBC-I9500XXUAMDK-CACHE-FULL-WIPE
https://hotfile.com/dl/226105798/e4489fb/MBC-I9500XXUAMDK-CACHE-FULL-WIPE.zip.html
Click to expand...
Click to collapse
Hi,
the only change is MBC default?
cyberz said:
Hi,
the only change is MBC default?
Click to expand...
Click to collapse
YES! insert into ODIN 3, in the CSC
what's the source of this firmware?
maranello69 said:
what's the source of this firmware?
Click to expand...
Click to collapse
Made from runoff firmware
@alexyuh
I already have the "I9500XXUAMDK_I9500OJVAMDK_EGY" file from samsung-update.com, can I use the other files from your upload with it or I must use yours in PDA?
and if yes can you just upload these files only because I don't have a good bandwidth to re-download the whole FW again
romeo26222 said:
@alexyuh
I already have the "I9500XXUAMDK_I9500OJVAMDK_EGY" file from samsung-update.com, can I use the other files from your upload with it or I must use yours in PDA?
and if yes can you just upload these files only because I don't have a good bandwidth to re-download the whole FW again
Click to expand...
Click to collapse
Yes you can,now do cache for I9500XXUAMDK_I9500OJVAMDK_EGY))
alexyuh said:
Yes you can,now do cache for I9500XXUAMDK_I9500OJVAMDK_EGY))
Click to expand...
Click to collapse
great, will you upload other files, PIT and modem?
and what is the SER and MBC stands for?
regards

[factory]-(firmware-sm-n900)

N900XXUCMJ6_ FACTORY_FIRMWARE_ILO
Automatic FULL WIPE!!!​
Composition zip:
Cache(CSC)
Bootloader
PDA
MODEM
ODIN 3.07
PIT
Warning!!!
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - ILO
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
[*]Region: (CSC): CEL;PCL;PTR;ILO.
Download
Download
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Service 4-F firmware file SER-N900XXUCMK2 for Russia​
Full wipe data (Section DATA)
Contains new ZIP One 3.09.3
Leads to the state of the smartphone:
CURRENT BINARU: Samsung OFFICIAL
SYSTEM STATUS: OFFICIAL
Counter KNOX - after root, does not reset!
After it is possible to obtain update on OTA.
PIT file is embedded in the image, it puts in the field,, PIT,, it is not necessary!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.co.nz/#!f9BxWSzK!O-3wPSJIeuhuIfwRYaPPmjxc4w1OmKxBE826sSCdAz8
Special Thanks
A.S._id
dell
Odexed or deodexed !!
does it mean that knox warranty restores?
any mirror?
Service 4-F firmware file SER-N900XXUCMK2 for Russia​
https://mega.co.nz/#!f9BxWSzK!O-3wPSJIeuhuIfwRYaPPmjxc4w1OmKxBE826sSCdAz8
just flashed latest MK4 build Service 4-F firmware file SER-N900XXUCMK2 for Russia but
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 1
update: did full wipe from settings and now binary and status are oficial but WARRANTY BIT is still 1.
Full wipe data (Section DATA)
Contains new ZIP One 3.09.3
Leads to the state of the smartphone:
CURRENT BINARU: Samsung OFFICIAL
SYSTEM STATUS: OFFICIAL
Counter KNOX - after root, does not reset!
After it is possible to obtain update on OTA.
PIT file is embedded in the image, it puts in the field,, PIT,, it is not necessary!
This firmware is used in case of problems with the device and not to clear the counters!
muratbaizhanov said:
just flashed latest MK4 build Service 4-F firmware file SER-N900XXUCMK2 for Russia but
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 1
update: did full wipe from settings and now binary and status are oficial but WARRANTY BIT is still 1.
Click to expand...
Click to collapse
Sorry, but Warranty bit can't be reset mate. At least, not yet.
does it work for N900ZSUBMI5 Taiwan ?
Does it work of I Flash on Dr ketan rom v2? I come from India. Thanks!
Sent from my SM-N900 using XDA Premium 4 mobile app
hello
pls new link for download
https://hotfile.com/dl/253430936/4663831/N900XXUCMJ6__FACTORY_FIRMWARE_ILO.zip.html
thanks alot
what mean for russia
if i have internatinal
can i ?
i need hebrew
thanks
alexyuh said:
Full wipe data (Section DATA)
Contains new ZIP One 3.09.3
Leads to the state of the smartphone:
CURRENT BINARU: Samsung OFFICIAL
SYSTEM STATUS: OFFICIAL
Counter KNOX - after root, does not reset!
After it is possible to obtain update on OTA.
PIT file is embedded in the image, it puts in the field,, PIT,, it is not necessary!
This firmware is used in case of problems with the device and not to clear the counters!
Click to expand...
Click to collapse
and used to set the counter to 0?
Enviado desde mi SM-N900 mediante Tapatalk
My problem
What is problem. Thanks
NOTE 3 VN ROM V5.0 KitKat Android 4.4.2
Android rom yükleme, root etme, recovery flaşlama, bootloader işlemleri
Samsung, HTC, LG, Sony ve MTK Replika cihazlar
dreamnej said:
My problem
View attachment 2530658
What is problem. Thanks
Click to expand...
Click to collapse
i9505
This FW is for 900 only
Zer0r said:
i9505
This FW is for 900 only
Click to expand...
Click to collapse
thanks
All right. problems in 9005. No other problems with my phone ( 9000q no problem )
when will the Nordic Version or UK unlocked version will come out
pit
please pit add.
http://forum.xda-developers.com/showthread.php?t=2463036 not compatible ( I think ).

[GT-I9500][Official][ROM]5.0.1 Android Lollipop Update [SER/INU] 10.07.2015

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android 5.0.1 List
Model name: GALAXY S4
Country: Russia
Version: Android 5.0.1
Changelist: 4727708
Build date: Fri, 17 Apr 2015 11:01:31 +0000
Product Code: SER
PDA: I9500XXUHOD4
CSC: I9500SERHOD4
Model name: GALAXY S4
Country: India
Version: Android 5.0.1
Changelist: 4719694
Build date: Fri, 17 Apr 2015 04:54:11 +0000
Product Code: INU
PDA: I9500XXUHOD3
CSC: I9500ODDHOC1
Android 5.1.1 Lollipop Coming Soon
"We're glad you're eager. We’ll be sure to let you know as soon as it is ready."
Video Review :
Screenshoot :
Flashing Instructions
- Unzip the file
- Open Odin 3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add extracted MD5-file to AP
- Make sure re-partition is UNticked
- Start flash, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+ Power + Volume Up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Is this official or leaked test firmware? Any information?
Russian language is?
Thanks man
Edit:Looks like leaked version
http://www.youtube.com/watch?v=2IH8tNQAzSs
:fingers-crossed: :laugh: :victory:
how to install it?..
official firmware
its REAL ! ,fast ,smooth ,battery life can be good with some changes.(read end of the article)
before your start remember you can not downgrade easily so be sure you want this
Installation Rom steps :
1 - download Odin 3.10 from here
2- download firmware from here
this zip file have 5 files I heard cuz of Chinese modem , its better to just flash AP file ! But I didn't flash like this and flashed all 5 files
3- extract firmware , boot your mobile on flash mode (when mobile is off hold volume down + home + power button)
4- run Odin 3.10 and load extracted files
5- Click start , wait ..... Done !
after flashing Rom with Odin you have to flash openrecovery-twrp-2.8.4.0-klte.tar
Installing Recovery and rooting steps :
1- download twrp from here
2- go to flash mode (download mode)
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- when you want to reboot to system Twrp will ask you to install SuperSU (rooting your device)
6- swipe to confirm
now you have to install google application
installing Gapss Steps
1- download last Gapps (google apps) from here
2- copy it on your sd/internal memory
3- boot to recovery
4- install the zip file from your twrp recovery
If you would like to change menu key to recent app key (like s5, note4 ,...) just do this
recent key steps
1- install es explorer (or some root explore) from here
2- give ex-explorer root access (by clicking menu / tools / root explorer)
3- Open /system/usr/keylayout/Generic.kl and change
Code:
key 139 [COLOR="Red"]MENU[/COLOR]
to
Code:
key 139 [COLOR="SeaGreen"]APP_SWITCH[/COLOR]
4- Restart your S4
5- now test it ... click to view recent apps hold for menu
full instruction is here
Unable to start Screen Mirroring because of a hardware issue
FIX Screen mirroring issue Steps
This problem occurs in version S [Work in samsung s4] after rooted samsung screen mirror will not work below is the solution :
1- open es-explorer and go to system/build.prop edit via text editor
2- Add below line :
wlan.wfd.hdcp=disable
3- save and reboot your device
4- finished now you can connect the screen mirroring with your smart TV
How to Enable " POPUp Incoming Call " Without Mod
1- Must be ROOT
2- Download SQLite_Editor From HERE
3- Open SQLite_Editor And Choose Apps
4- Choose Settings Storage
5- Choose Settings.db
6- Choose System
7- Click on Search And Type Popup or Incoming_Call
8- Change Value From 0 To 1 , Save
9-Enjoy it
How to remove S Finder & Quick Connect in Notification bar
1. Open Root Explorer and go to system folder.
2. Open build.prop in Text Editor (Please make a backup of your build.prop)
3. find this two line
ro.product.name=
ro.product.device=
4. Replace whatever value is in there with the value below.
ro.product.name=kltevzw
ro.product.device=kltevzw
5. Save it and Reboot.
For having best battery life
I Installed some usefull application and removed some unwanted apps like Chinese apps and (installed : greenify , tasker , toggle data , system app manager ) then ( disabled some system apps from "system app manager" : samsung kies , s translate , quick connect , s finder , 3d tour , ANT , S Voice , whatch on , S memo , s finder , search )
Its done ENJOY
don't forget to click Thanks or visit my Naroon Website
thank you
install only odin
Stock on the keyboard and language pack what should we do
nebulafire said:
Stock on the keyboard and language pack what should we do
Click to expand...
Click to collapse
Try please morelocale 2
This is in chinese language ?
I see the rom is coming with new bootloader, new partitions...etc... if i flash it with odin, can i come back to 4.4.2 ?
blackcat67 said:
View attachment 3121083
install only odin
Click to expand...
Click to collapse
tnx.
you should add that to main post, and explain that its a odin rom.
Is this 11GB storage rom or 8GB ?
Is it pre-rooted? If not how can we root it?
Can someone reload file to more frandly host. Like gogle drive or something without downloader.
Should i use 11Gb pit file or not?
GURCU said:
Is it pre-rooted? If not how can we root it?
Click to expand...
Click to collapse
I used the official chainfire's tar through ODIN.
Worked great..
i can't flash gapps, i get 'insufficient storage space available in system partition'.
i have a lot of space available so i don't get it..
help please...?
blackcat67 said:
Download : Link By alemtro
Source
http://bbs.gfan.com/android-7820042-1-1.html
gapps
Review Video Coming soon.
Screenshot By alemtro
View attachment 3120963 View attachment 3120964 View attachment 3120965 View attachment 3120966 View attachment 3120967View attachment 3120968 View attachment 3120969
Click to expand...
Click to collapse
Can i use 11GB pit file for this rom or not?
This include Spanish language?

How to Root Samsung Galaxy A9 ( A9000 )

I bought my Galaxy A9 in China ( I work here ) and as you may know Google apps are not already installed on Chinese phones and I need to root and flash Google Apps.
The problem is as this phone is too new, I can't find any ways to root it. I tried Kingroot, Framaroot....but all fail. I have unlocked phone via CROM. Any idea how I can root this beast?
Try to flash with A9 Hongkong Rom
Try Root Unlocker Pro .. Search In Google and You May Find It
Wait for CF Auto-Root to support your phone. SM-A9000?
Sent from my GT-I9500
Anyone heard anymore?
Don't brick your phone while still too new. As KrasCGQ said wait for proper root exploits to be released for the Galaxy A9. I live in Kenya and the A9 hasn't hit our markets yet. I soooo envious to get the A9 more any other device this year....it might not be perfect, but I think it's rock solid for power users, 6' inch 4000mAh is just right! How I hope and pray that we get a dedicated Dev's for the Galaxy A9, it will make the device absolutely AWESOME!!! :fingers-crossed::fingers-crossed:
alireza.nasibi said:
I bought my Galaxy A9 in China ( I work here ) and as you may know Google apps are not already installed on Chinese phones and I need to root and flash Google Apps.
The problem is as this phone is too new, I can't find any ways to root it. I tried Kingroot, Framaroot....but all fail. I have unlocked phone via CROM. Any idea how I can root this beast?
Click to expand...
Click to collapse
If you just want get google apps back, just flush HongKong version firmware, I'd just done my own. The latest firmware from HK is 'A9000ZCU1APB3'. BTW, you should get the HK version's PIT files and flush it first, then again the single .tmd firmware file flush with pc odin.
View attachment 3666707
View attachment 3666708
View attachment 3666709
ryanxiao said:
If you just want get google apps back, just flush HongKong version firmware, I'd just done my own. The latest firmware from HK is 'A9000ZCU1APB3'. BTW, you should get the HK version's PIT files and flush it first, then again the single .tmd firmware file flush with pc odin.
View attachment 3666707
View attachment 3666708
View attachment 3666709
Click to expand...
Click to collapse
Can you please share HK pit file with me? Thank you!
Due to the still missing possibility to have root access to Samsung A9 I am confronted with a different problem. I switched to the A9 because I broke my other phone. I have no access anymore to my old phone but I still have very up to date backups available on my SD-card ... All my backups I made with Titanium Backup. In order to restore them on my new A9 I unfortunately need root access ...
Does anyone have another idea how to restore my backups without root access or do I really have to wait until someone finds a possibility to gain root access ...
#10
ryanxiao said:
If you just want get google apps back, just flush HongKong version firmware, I'd just done my own. The latest firmware from HK is 'A9000ZCU1APB3'. BTW, you should get the HK version's PIT files and flush it first, then again the single .tmd firmware file flush with pc odin.
View attachment 3666707
View attachment 3666708
View attachment 3666709
Click to expand...
Click to collapse
Thanks for the direction. It worked like MAGIC
A9 HK PIT Files
eddyrampel said:
Thanks for the direction. It worked like MAGIC
Click to expand...
Click to collapse
Hi bro, can u share the link for the PIT files? thx heaps... i just bought the A9 from China and bring it to Indonesia without knowing that google apps are not available for china based phone...looking forward to flash it...thx
alireza.nasibi said:
Can you please share HK pit file with me? Thank you!
Click to expand...
Click to collapse
Can you please share HK pit file with me? I also got CHns phone and don't have HK PIT. So, if I get it, it will be a pretty helpful. Thank you!
Hi @alireza.nasibi @Gunmon @kevin.na
The easiest way is to use SamFirm and download TGY firmware via that application.
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Here is what should you input to download latest firmware for now together with pit file.
Device model: SM-A9000
Region: TGY
PDA: A9000ZHU1APB4
CSC: A9000ZZH1APB4
Phone: A9000ZCU1APB4
Binary Nature: Checked
Check CRC32: Checked
Decrypt automatically: Checked
Sent from my ASUS_Z00AD
krasCGQ said:
Hi @alireza.nasibi @Gunmon @kevin.na
The easiest way is to use SamFirm and download TGY firmware via that application.
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Here is what should you input to download latest firmware for now together with pit file.
Device model: SM-A9000
Region: TGY
PDA: A9000ZHU1APB4
CSC: A9000ZZH1APB4
Phone: A9000ZCU1APB4
Binary Nature: Checked
Check CRC32: Checked
Decrypt automatically: Checked
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
I followed exactly what you explained. Decrypted files are AP, BL,CF & CSC. I can't find any PIT file there. Can someone simply share PIT file of HK firmware for us, please?
alireza.nasibi said:
I followed exactly what you explained. Decrypted files are AP, BL,CF & CSC. I can't find any PIT file there. Can someone simply share PIT file of HK firmware for us, please?
Click to expand...
Click to collapse
PIT file is inside CSC tar.md5 file. Open it with 7-Zip and you'll find a pit file there together with cache.img and hidden.img.
Edit: Sorry for not mention that before.
Sent from my ASUS_Z00AD
Still need root access to A9
Does anyone know a way how to root the A9. I need a rooted A9 in order to restore my backup made by Titanium Backup.
I got root
I flash the A9000-TWRP-PA7.tar (I dont know who build this..) found on the Chinese forum.
Then flash SuperSU via TWRP.
After I got root authority I install xposed, but some modules occur system crash.
Successfully rooted. Thanks to chinese forum..
how can i root m Samsung Galaxy A9 Sm-A9000 if evertime i flash it with Odin V3.07 or v1.85 it keeps on having a msg of "secure check failed : recovery"?
thank for all I finally solved it
If you just want get google apps back, just flush HongKong version firmware, I'd just done my own. The latest firmware from HK is 'A9000ZCU1APB3'. BTW, you should get the HK version's PIT files and flush it first, then again the single .tmd firmware file flush with pc odin.
1. download
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
find information your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.run SamFirm.exe
Device model: SM-A9000
Region: TGY
PDA: A9000ZHU1APB4
CSC: A9000ZZH1APB4
Phone: A9000ZCU1APB4
Binary Nature: Checked
Check CRC32: Checked
Decrypt automatically: Checked
and then download
2.extract ****.zip then there are 4 files
2. winrar inside file"CSC_*** .tar.md5" to get .pit file
3. put all file in odin 3.x , connect phone to com then set your phone to download mode ( vol-down + power + home)
finally success

Changing CSC

Hi I currently have a EGY CSC A51 but I live in UK. It doesn't have Samsung pay so I want to change it to UK. Do I just have to download the firmware from sammobile and flash it with odin once the June update for UK is released (Egypt already has it) or is there a different method?
Also will there be any problems since mine is the 6gb ram variant and I'm not sure if the UK sells 6gb ram versions only 4gb. But the model number is the same a515f.
step by step
- A515F OJM and A515F OXM have same pit file and userdata file is at the end of partition so you won't loose memory size
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A515F OJM CSC ( EGY) :
A515F OXM CSC (BTU):
so :
1-save all your data
2-download A515F OXM firmware from here ( or another forum )
https://samfw.com/firmware/SM-A515F/BTU/A515FXXU3BTF4
3-install it with ODIN ( AP + BL + CP + CSC_OMC_OXM_A515FOXM3BTF4_CL18770262_QB31913704_REV00_user_low_ship.tar.md5 )
4-as CSC by default is SER , change active CSC to BTU with this méthod :
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
regards
yakapa40 said:
step by step
- A515F OJM and A515F OXM have same pit file and userdata file is at the end of partition so you won't loose memory size
A515F OJM CSC ( EGY) :
A515F OXM CSC (BTU):
so :
1-save all your data
2-download A515F OXM firmware from here ( or another forum )
https://samfw.com/firmware/SM-A515F/BTU/A515FXXU3BTF4
3-install it with ODIN ( AP + BL + CP + CSC_OMC_OXM_A515FOXM3BTF4_CL18770262_QB31913704_REV00_user_low_ship.tar.md5 )
4-as CSC by default is SER , change active CSC to BTU with this méthod :
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
regards
Click to expand...
Click to collapse
Hi i flashed the BTU firmware from sammobile and as you stated the csc did change to SER.
I sent you a pm for the apk link
Thank you for your help so far
Hello,
On Samsung Galaxy A51, Google Chrome (including other chrome based browsers such as brave) and Google Drive are able to download files to internal storage even when I have denied storage permission to both the apps. Has anyone noticed this? This is a big privacy concern for me as anything can be downloaded to my phone without my permission. Do we have any solution to deny chrome and drive from accessing my internal storage?
I ALWAYS disable Chrome and use Firefox as my default browser. Just go into your Settings/Apps and make sure you show all apps. Scroll down to Chrome, long click on it, remove the cache and disable it.
OldBob65+ said:
I ALWAYS disable Chrome and use Firefox as my default browser. Just go into your Settings/Apps and make sure you show all apps. Scroll down to Chrome, long click on it, remove the cache and disable it.
Click to expand...
Click to collapse
I have done the same thing as of now. Using Samsung internet which is working as expected. Tried DuckDuckGo as well which is working fine.
Only Chrome and Brave seems to have this issue. How is this possible? All my bookmarks are on Google Chrome. So it is tough to use another browser. But until Chrome is able to access my storage without permission it will stay disabled. How are they able to download without storage permission? Even Google Drive is able to download files without permission. Do we have any solution to this?
yakapa40 said:
step by step
- A515F OJM and A515F OXM have same pit file and userdata file is at the end of partition so you won't loose memory size
A515F OJM CSC ( EGY) :
A515F OXM CSC (BTU):
so :
1-save all your data
2-download A515F OXM firmware from here ( or another forum )
https://samfw.com/firmware/SM-A515F/BTU/A515FXXU3BTF4
3-install it with ODIN ( AP + BL + CP + CSC_OMC_OXM_A515FOXM3BTF4_CL18770262_QB31913704_REV00_user_low_ship.tar.md5 )
4-as CSC by default is SER , change active CSC to BTU with this méthod :
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
regards
Click to expand...
Click to collapse
I am noticing that you do not have any USA based CSC. Are you un able to get them? I am currently having trouble with my phone not working here. (it's CSC is TPA)
@NewUser16683
TPA is part of OWO multi CSC
edit:
if your device is A515F , you can only flash a A515F firmware ( OJM OLM OXM OWA OWB OWE or OWO )
and not A515U; A515U1 or A515W firmware
https://forum.xda-developers.com/galaxy-a51/how-to/galaxy-a51-a515f-a515u-a515u1-a515w-t4140313
regards
yakapa40 said:
@NewUser16683
TPA is part of OWO multi CSC
edit:
if your device is A515F , you can only flash a A515F firmware ( OJM OLM OXM OWA OWB OWE or OWO )
and not A515U; A515U1 or A515W firmware
https://forum.xda-developers.com/galaxy-a51/how-to/galaxy-a51-a515f-a515u-a515u1-a515w-t4140313
regards
Click to expand...
Click to collapse
Can you please tell me how did you get the info in the screenshot showing the csc codes from prism.img file?
I have the prism.img files of another phone and I need to check.
Thanks!

Categories

Resources