Hello
Just got a small problem with my phone. I have rooted and unrooted my LG L50 multiple times now with different programs, iv changed to boot image which is somehow messed up now even though it was fine before and i'm wondering if there it a way of reinstalling android on it (kitkat 4.4.2) or maybe even put android lollipop onto it if possible.
Please reply quick thanks
for lollipop we need unlocked bootloader witch im currently working on.but i will probably faill--.-- to get your android 4.4.2 installed you will need flash tool and a kdz file just follow this guide and good luck http://forum.xda-developers.com/showthread.php?t=2797190 .. and btw this will not wipe your data you will have to do that later
L50 Sporty
I tried to install two KDZ ROMs by the KDZ updater however it consists as Phone not found, and by the LG support tool it arrives at 80% of the rom install in the error apparatus. Anyone who can help thanks.
Related
Hi every one!
I have an LG G2, which is showing as D802-20a but under the covers (on main board) it is showing as D800. It is rooted (with towel root). It is portrayed as International edition D802 but it is not. Its AT&T LG G2 D800 in fact.
My question to all of your experts is if I have to flash a custom rom (Bliss POP 4.3) (5.1.1) on it. what I'll have to do first. It is currently showing as 4.4.2 D802-20a. Will I have to flash it with D800 tot file? Wont that give an error of cross version in LG Flash tool.......Firstly I tried to install AutoRec for D802 on it. It bricked my set. I opened up and short-circuited the capacitors to force it into QDLoader 9008 mode and then repaired Download Mode by using Boarddiag.
So flashing D802 tot is not an option, I think. Cutting the long story short, I want to have Bliss POP or Cloudy G2 ver 3.3 on it. What will be the procedure. Currently, it is rooted. no recovery installed. Please inform me of the method and software version files to be used. Thanks in advance. Update from Settings>About>Update simply doesn't work. device not registered or up-to-date or check after 24 hours etc. shows up.
P.S. >>> I replaced that bricked set (after repairing with some soft n hard methods) to the Shopkeeper and got another one. I believe it is same as the first one. Now, to play safe, I just need to make sure things don't mess up this time. so need a procedural reply. Thanks in advance.....
I did it...........though I found the forum non-cooperative.
Optimistic_Guy said:
Hi every one!
I have an LG G2, which is showing as D802-20a but under the covers (on main board) it is showing as D800. It is rooted (with towel root). It is portrayed as International edition D802 but it is not. Its AT&T LG G2 D800 in fact.
My question to all of your experts is if I have to flash a custom rom (Bliss POP 4.3) (5.1.1) on it. what I'll have to do first. It is currently showing as 4.4.2 D802-20a. Will I have to flash it with D800 tot file? Wont that give an error of cross version in LG Flash tool.......Firstly I tried to install AutoRec for D802 on it. It bricked my set. I opened up and short-circuited the capacitors to force it into QDLoader 9008 mode and then repaired Download Mode by using Boarddiag.
So flashing D802 tot is not an option, I think. Cutting the long story short, I want to have Bliss POP or Cloudy G2 ver 3.3 on it. What will be the procedure. Currently, it is rooted. no recovery installed. Please inform me of the method and software version files to be used. Thanks in advance. Update from Settings>About>Update simply doesn't work. device not registered or up-to-date or check after 24 hours etc. shows up.
P.S. >>> I replaced that bricked set (after repairing with some soft n hard methods) to the Shopkeeper and got another one. I believe it is same as the first one. Now, to play safe, I just need to make sure things don't mess up this time. so need a procedural reply. Thanks in advance.....
I did it...........though I found the forum non-cooperative.
Click to expand...
Click to collapse
Care to elaborate?
I have an LS980 crossflashed into D802 and ridiculous fact that it had IMEI verified to be D802, now I have nice bricked phone with shiny white lines to the left side of the screen when I turn it on or put into download mode. I'm stuck with Android Bootloader Interface when I try to put phone into download mode, no QDLoader thingi in Device manager though. Then I decided to open the phone and it had flex cables of D800, bottom black cover of D805 and Motherboard of LS980(Sprit). (Running Windows 8.1 64-bit on an AMD chipset laptop which has USB 3.0 and I can go extra mile to try it on my old PC with USB 2.0 and windows 7 32-bit).
Hi,
I have Lg G2, and I upgraded it Android Lollipop using Lg PCSuite. After the completion of upgrading my Cell phone Touch screen is not working properly, as I touch on the top of the screen and something is touched on the bottom of the screen.
Now, I used Lg Flash Tool to Downgrade it back to the old Kitkat rom, I found tutorials from here and I downloaded .tot file for Lg G2 D802, it flashed properly on my cell phone but the problem is same.
Then, I searched few threads here where I found that this problem occurs when you upgrade to a non international version and I must open the backcover and see the original model, where I found LS980 written on the back. I downloaded .tot file for Sprint and now when I flash, it says like that you cannot start install on D802 with LS980 Bin file..
Please Help
jydee said:
Hi,
I have Lg G2, and I upgraded it Android Lollipop using Lg PCSuite. After the completion of upgrading my Cell phone Touch screen is not working properly, as I touch on the top of the screen and something is touched on the bottom of the screen.
Now, I used Lg Flash Tool to Downgrade it back to the old Kitkat rom, I found tutorials from here and I downloaded .tot file for Lg G2 D802, it flashed properly on my cell phone but the problem is same.
Then, I searched few threads here where I found that this problem occurs when you upgrade to a non international version and I must open the backcover and see the original model, where I found LS980 written on the back. I downloaded .tot file for Sprint and now when I flash, it says like that you cannot start install on D802 with LS980 Bin file..
Please Help
Click to expand...
Click to collapse
Hi
Thank you for using XDA Assist
You can head over here for help
G2 Q&A, Help & Troubleshooting
I got the 6.0 update on my stock AT&T G3 a couple of days ago. Now I am looking to root the phone, but I am confused with the rooting method because all existing methods seem to either mention Kitkat/Lollipop, or the D855 unlocked version. What's currently THE way to root an AT&T G3 running stock Marshmallow?
Thanks!
svemprala said:
I got the 6.0 update on my stock AT&T G3 a couple of days ago. Now I am looking to root the phone, but I am confused with the rooting method because all existing methods seem to either mention Kitkat/Lollipop, or the D855 unlocked version. What's currently THE way to root an AT&T G3 running stock Marshmallow?
Thanks!
Click to expand...
Click to collapse
You'll need to downgrade using LGUP
You could always try KingRoot, however I'm not sure if it works on AT&T Marshmallow. I know it worked on the D855 Marshmallow. Worth a shot.
hyelton said:
You'll need to downgrade using LGUP
Click to expand...
Click to collapse
in reading the threads for lg up i'm unable to find the kdz for lp for the d850. i tried following the link to download official from lg firmware site and after inputting my imei it says not yet available...
any help greatly appreciated. TIA
my goal is to either install a custom recovery / rom
or downgrade to stock LP so i can root ... and then recovery > custom rom
edit: a bit of an update. I was able to get into adb and reboot to stock recovery. took a few tries. and ended up having to use adb over network (so i could keep the phone plugged in to wall charger, my pc charges it but i don't think very well so when i'd issue the reboot to recovery command it would start the loop again and i'd have to start over. finally got it to reboot to recovery. but now i'm stuck at trying to issue the fastboot boot <TWRP.IMG>
says "waiting for device" im so confused right now.... i did remember to plug it back into the computer after it entered recovery (lil green android guy with the text "no command" underneath)
plz someone save my ass! its almost 2:30 am here
killerskincanoe said:
in reading the threads for lg up i'm unable to find the kdz for lp for the d850. i tried following the link to download official from lg firmware site and after inputting my imei it says not yet available...
any help greatly appreciated. TIA
my goal is to either install a custom recovery / rom
or downgrade to stock LP so i can root ... and then recovery > custom rom
edit: a bit of an update. I was able to get into adb and reboot to stock recovery. took a few tries. and ended up having to use adb over network (so i could keep the phone plugged in to wall charger, my pc charges it but i don't think very well so when i'd issue the reboot to recovery command it would start the loop again and i'd have to start over. finally got it to reboot to recovery. but now i'm stuck at trying to issue the fastboot boot <TWRP.IMG>
says "waiting for device" im so confused right now.... i did remember to plug it back into the computer after it entered recovery (lil green android guy with the text "no command" underneath)
plz someone save my ass! its almost 2:30 am here
Click to expand...
Click to collapse
Here's your problem, as stated in my back to stock guide AT&T models and the D850 is TOT File only. You won't ever find a kdz because there is not one. You only have a kitkat tot file you can flash.
:crying:
My issue is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
I also had some what same problem with my old lg device ... Here's what you can do:-
Download any custom rom of your lg g3 Like Cyanogenmod and flash it via recovery.
Recovery can be stock or custom it doesn't matter.
Remember to wipe dalvik cache and wipe data before flashing the ROM. I did it and my device was working fine.
Remember that first boot
always takes 2-3 mins so be patient.
Sent from my Aqua Trend using Tapatalk
:crying:
My issues is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!