Hi,
I have Lg G2, and I upgraded it Android Lollipop using Lg PCSuite. After the completion of upgrading my Cell phone Touch screen is not working properly, as I touch on the top of the screen and something is touched on the bottom of the screen.
Now, I used Lg Flash Tool to Downgrade it back to the old Kitkat rom, I found tutorials from here and I downloaded .tot file for Lg G2 D802, it flashed properly on my cell phone but the problem is same.
Then, I searched few threads here where I found that this problem occurs when you upgrade to a non international version and I must open the backcover and see the original model, where I found LS980 written on the back. I downloaded .tot file for Sprint and now when I flash, it says like that you cannot start install on D802 with LS980 Bin file..
Please Help
jydee said:
Hi,
I have Lg G2, and I upgraded it Android Lollipop using Lg PCSuite. After the completion of upgrading my Cell phone Touch screen is not working properly, as I touch on the top of the screen and something is touched on the bottom of the screen.
Now, I used Lg Flash Tool to Downgrade it back to the old Kitkat rom, I found tutorials from here and I downloaded .tot file for Lg G2 D802, it flashed properly on my cell phone but the problem is same.
Then, I searched few threads here where I found that this problem occurs when you upgrade to a non international version and I must open the backcover and see the original model, where I found LS980 written on the back. I downloaded .tot file for Sprint and now when I flash, it says like that you cannot start install on D802 with LS980 Bin file..
Please Help
Click to expand...
Click to collapse
Hi
Thank you for using XDA Assist
You can head over here for help
G2 Q&A, Help & Troubleshooting
Related
I have been stuck for over a month now and now I am forced to make this thread with the full story:
I bought an LG G2 D802. A few months later I updated it through the LG software update tool. This thing killed my phone. It installed lollipop and I then had these issues:
[1]no imei.
[2]no baseband.(FIXED)
[3]touch is not working properly. It is haywire. It does not respond properly at all and the phone is unusable
[4]no sim usage as no IMEI.
[5] ONLY 16 gb showing as memory available. (FIXED)
I did this. Using OTG to use my phone, I flashed stock d802 ROM (kitkat). This got me to Stock ROM but phone was boot looping. I factory resetted and it started up okay. I then found a way to fix the 16 gb issue by using a droid view guide called : "Your 32GB LG G2 Shows only 16GB Storage Space? Here’s How to Fix the Issue! " This fixed my 16 gb issue. But everything else same... Then I followed a guide to fix ESN but it demanded that the phone be rooted. So I rooted and installed TWRP. But I was not able to fix IMEI. So I then gave up I searched my issue extensively and found a thread (ON XDA) which i cant post here... But its name is: "Strange touch problem after upgrading my lg g2". There I read of other people who had the same issues. This basically happens to refurbished handsets, apparently. There where no proper fixes there. None of the people where able to fix their phones.
Some guy said that check your motherboard and install the software according to the motherboard. I opened the board and found it to be a motherboard of LG D801. No problem. I downloaded D801 software and tried installing with kdz method but it failed. And now so has the tot method. I have downloaded over 20 gbs of different software and roms. ALl of these roms where completely downloaded!! Please help me here...
Its not me only: These threads are after the same issue!!:
1. Name is: (on XDA) "LG G2 No IMEI, Touch not Responding After Update" (One person)
2. Name is: (on XDA) "Strange touch problem after upgrading my lg g2" (MULTIPLE people withe SAME issue)
I am not an advanced android guy but I can follow directions and I have adb, root, twrp, qpst set up.
zhzhou said:
Can you be more specific on the error when using KDZ and TOT? Please post a screenshot.
Click to expand...
Click to collapse
The kdz method just fails at 2%. But the tot method works. I installed jellybean to see if that fixed the problem But no go. Still have no touch screen and no IMEI. The major problem right now is touch screen ONLY!
zhzhou said:
Which TOT did you install? D801 or D802? I think it should be D801 because it matches your motherboard.
Click to expand...
Click to collapse
I agree that I should install tot of d801 . But the install fails. I tried using the LG_UP 974 dll file but that does not work too! The error is alwasys wrong model number. The TOT method works for d802 roms.
I am wondering. Should I flash a kernel of d801?
hyelton said:
Well that can happen if you flashed the WRONG model for your phone, and youd need to flash the correct model to fix it.
or 2 its an hardware issue.
Click to expand...
Click to collapse
Hyelten some help would be dearly loved!
zhzhou said:
You should install the D801 TOT. Here's how to do it.
1) Download D801 TOT
2) Download HxD hex editor
3) Open D801 TOT in HxD
4) Find first instance of "D801" and change to "D802"
5) Save new TOT file
6) Open Flashtool and flash the modified D801 TOT that you just created (use the LG_UP974.dll)
This should work to get D801 firmware onto your device.
Click to expand...
Click to collapse
Any possibility of hard bricking my phone??
zhzhou said:
You should install the D801 TOT. Here's how to do it.
1) Download D801 TOT
2) Download HxD hex editor
3) Open D801 TOT in HxD
4) Find first instance of "D801" and change to "D802"
5) Save new TOT file
6) Open Flashtool and flash the modified D801 TOT that you just created (use the LG_UP974.dll)
This should work to get D801 firmware onto your device.
Click to expand...
Click to collapse
I did what you said and changed the first instance to d802. Now a new error dialog appears saying: "failed previousload()"
Hi, thank you for using XDA Assist. Your devices forum is the best place to ask for help, they are the experts on your device. Start with this, http://forum.xda-developers.com/lg-g2/general/lg-g2-sticky-roll-thread-t3123148 and follow the go back to stock. Also see this, http://forum.xda-developers.com/lg-g2
zhzhou said:
It's unlikely you'll hard brick the phone. You've already put the D802 firmware on a board that you've confirmed is D801.
I had wrong firmware and subsequently lost the IMEI. I flashed the right one firmware (after modifying TOT because of model mismatch error), and the IMEI came back.
Isn't your phone pretty much useless already? I think the steps I described above is pretty low risk. You can find the answer pretty quickly by just doing it
Click to expand...
Click to collapse
hyelton said:
Just follow that.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
This error!!! It just stops here...
hello everyone, i have got lg g3 d850 at&t model. i think it has got soft bricked, it keeps on showing popups like * unfortunately failed to open Lg smartcover* and these popups dont go away. i am not being able to use my phone thats y i want to ask how can i flash stock firmware onto my lg g3 d850 32gb model 3gb ram. please guide. thanks.
A simple LG G3 back to stock search would show you my guide, even with Google. But here you go. Follow the tot method. http://forum.xda-developers.com/showthread.php?p=53452990
Sent from my iPhone using Tapatalk
Hello to all and hope you will be fine
My Problem: i bought LG G2 D802 last week, it was running on 4.4 kit kat, i thought to root my phone and to install android 5.0,
So i use " one click recovery" for rooting but sudddenly my phone stuck in fastboot mode, after a lot of search i find a solution with LAF, BOOT, ABOOT etc, but i flash these .img files of d801 unfortunately. after that in download mode i installed KDZ, for turned on but touch is not working its awkward.
After searching lot i find that my LG G2 is Refurbished. i opened it and see the motherboard and D800 was written on it. So it is D800, but it always shows d802 in adb.
After doing above all things what happened to my phone
No network
Baseband Unknown
Imei Null
Touch is not responding
Internal 32 gb but showing 10gb
Restarts after 1 or 2 minutes
im currently using it with Mouse and so worried as i had managed money with great difficulty. :crying:
Hi there
Here is your device's main forum area:
http://forum.xda-developers.com/lg-g2
Please post your question here:
http://forum.xda-developers.com/showthread.php?t=2692223
That's where you'll find the experts for your device.
Good luck
Hi every one!
I have an LG G2, which is showing as D802-20a but under the covers (on main board) it is showing as D800. It is rooted (with towel root). It is portrayed as International edition D802 but it is not. Its AT&T LG G2 D800 in fact.
My question to all of your experts is if I have to flash a custom rom (Bliss POP 4.3) (5.1.1) on it. what I'll have to do first. It is currently showing as 4.4.2 D802-20a. Will I have to flash it with D800 tot file? Wont that give an error of cross version in LG Flash tool.......Firstly I tried to install AutoRec for D802 on it. It bricked my set. I opened up and short-circuited the capacitors to force it into QDLoader 9008 mode and then repaired Download Mode by using Boarddiag.
So flashing D802 tot is not an option, I think. Cutting the long story short, I want to have Bliss POP or Cloudy G2 ver 3.3 on it. What will be the procedure. Currently, it is rooted. no recovery installed. Please inform me of the method and software version files to be used. Thanks in advance. Update from Settings>About>Update simply doesn't work. device not registered or up-to-date or check after 24 hours etc. shows up.
P.S. >>> I replaced that bricked set (after repairing with some soft n hard methods) to the Shopkeeper and got another one. I believe it is same as the first one. Now, to play safe, I just need to make sure things don't mess up this time. so need a procedural reply. Thanks in advance.....
I did it...........though I found the forum non-cooperative.
Optimistic_Guy said:
Hi every one!
I have an LG G2, which is showing as D802-20a but under the covers (on main board) it is showing as D800. It is rooted (with towel root). It is portrayed as International edition D802 but it is not. Its AT&T LG G2 D800 in fact.
My question to all of your experts is if I have to flash a custom rom (Bliss POP 4.3) (5.1.1) on it. what I'll have to do first. It is currently showing as 4.4.2 D802-20a. Will I have to flash it with D800 tot file? Wont that give an error of cross version in LG Flash tool.......Firstly I tried to install AutoRec for D802 on it. It bricked my set. I opened up and short-circuited the capacitors to force it into QDLoader 9008 mode and then repaired Download Mode by using Boarddiag.
So flashing D802 tot is not an option, I think. Cutting the long story short, I want to have Bliss POP or Cloudy G2 ver 3.3 on it. What will be the procedure. Currently, it is rooted. no recovery installed. Please inform me of the method and software version files to be used. Thanks in advance. Update from Settings>About>Update simply doesn't work. device not registered or up-to-date or check after 24 hours etc. shows up.
P.S. >>> I replaced that bricked set (after repairing with some soft n hard methods) to the Shopkeeper and got another one. I believe it is same as the first one. Now, to play safe, I just need to make sure things don't mess up this time. so need a procedural reply. Thanks in advance.....
I did it...........though I found the forum non-cooperative.
Click to expand...
Click to collapse
Care to elaborate?
I have an LS980 crossflashed into D802 and ridiculous fact that it had IMEI verified to be D802, now I have nice bricked phone with shiny white lines to the left side of the screen when I turn it on or put into download mode. I'm stuck with Android Bootloader Interface when I try to put phone into download mode, no QDLoader thingi in Device manager though. Then I decided to open the phone and it had flex cables of D800, bottom black cover of D805 and Motherboard of LS980(Sprit). (Running Windows 8.1 64-bit on an AMD chipset laptop which has USB 3.0 and I can go extra mile to try it on my old PC with USB 2.0 and windows 7 32-bit).
Hello
Just got a small problem with my phone. I have rooted and unrooted my LG L50 multiple times now with different programs, iv changed to boot image which is somehow messed up now even though it was fine before and i'm wondering if there it a way of reinstalling android on it (kitkat 4.4.2) or maybe even put android lollipop onto it if possible.
Please reply quick thanks
for lollipop we need unlocked bootloader witch im currently working on.but i will probably faill--.-- to get your android 4.4.2 installed you will need flash tool and a kdz file just follow this guide and good luck http://forum.xda-developers.com/showthread.php?t=2797190 .. and btw this will not wipe your data you will have to do that later
L50 Sporty
I tried to install two KDZ ROMs by the KDZ updater however it consists as Phone not found, and by the LG support tool it arrives at 80% of the rom install in the error apparatus. Anyone who can help thanks.