I'm trying to make flashable zip stock rom for ASCEND G7-L01 (not g760)
I used dsixda's kitchen but the rom can't be installed ,sometimes i get error: please update to latest updater
and somtimes i get: this package for g620,g760...
what to do to make it install successfully ?
thank you
Hello. Can you make a dump file with using Qualcomm QPST and upload it ? I can make an installable copy for you. Also I need the dump file for reflash my devices which was bricked..
Related
can someone create a update.zip for cwm with this old firmware v08 , i just badly need it , i have a prototype o3d and i updated it to v10d and after that my battery is always 0%.. the old firmware that is ok with my o3d is v08.
this is the link of the 1st rom that i need.
http://www.multiupload.com/UQPQO1SJ0S
i am hoping that someone can help. thanks
isaias19 said:
can someone create a update.zip for cwm with this old firmware v08 , i just badly need it , i have a prototype o3d and i updated it to v10d and after that my battery is always 0%.. the old firmware that is ok with my o3d is v08.
this is the link of the 1st rom that i need.
http://www.multiupload.com/UQPQO1SJ0S
i am hoping that someone can help. thanks
Click to expand...
Click to collapse
If that's the firmware you need, just download it and put in a zip file.
right click on the folder then add to archive. use the compression method store.
That should work but do a backup before hand just in case.
I tried to zip it and rename it to update.zip and install it via cwm recovery but the recovery said that it failed on signature.. Something.,,
isaias19 said:
I tried to zip it and rename it to update.zip and install it via cwm recovery but the recovery said that it failed on signature.. Something.,,
Click to expand...
Click to collapse
The file is already a zip file, it's just in the wrong compression method...
using winrar, open the zip file, then tools, then convert archive.
A box should appear, change the archive format to zip, and compression method to store.
Hi, isaias19, I also have a prototype o3d. I can not use it after rom(v10d, v10e) upgrade. If possible, could you post your v08 rom backup file using cmw?? Thanks.
@ modernbruce
we have the same problem , i did not backup my stock rom thats why iam searching for the v08 firmware. =C
Hi ,
For your case update.zip will not solve your problem.
you need dump your system and replace by another one:
To see your partition :
adb shell cat /proc/partitions
After try use these command to put your new system :
http://www.omappedia.org/wiki/Android_eMMC_Booting
++
Hi there. i have a problem i have flashed my A13 7'' MID tablet with a cyanogenmod but touch don't work i can't load modules with anything i have tryed all and never load modules when try to load a module with insmod only say opperation not permitted
i have a backup with CWM from my old rom but i can't flash it (is a normal backup nandroid)
how i can make a .zip flasheable img with this backup? (my backup is ext4.tar)
i have tryed with somepost here but don't work..
i try with: CWM2update.zip creator by ss429842 but all the time say me can't find 7za. :| (i use win7 ultimate 64 bits)
i try with: Update-Zip-Packager 3.0 by Daneshm90.
but i really can't do it. it just start after compress all just the .zip disappears from my folder :|
my tablet is nuclear_pfdq88c-eng 4.0.4 imm76d with android 4.0.4 if anyone have a rom for it i have download another rom but i can't flash wih livesuit all the time tell me img file invalid e_e and i can't flash with CWM. thanks!!
I Already solve this so can close this thread. thanks anyway!!
Hello First sorry for my bad English. I have this file I8262XXBNC1_I8262ODDNC1_I8262DDNB1_HOME.tar a official firmware. can i use this to make a custom rom. I know that i can use a rom from this forum to change but i want to this project for fun, I opened it with winrar those files(photo below) and i saw that i need more files to do that. What you suggest to do?
Don't know well!!! But I think you can... just extract the firmware and found the "system" folder from there!!!
Press the Thanks button!!!
From my research i saw how to extract the files from the system but no way how to make one file again. I did that and i bricked my phone so i install again original firmware with odin.
If you have a pc... then use apktool to make and edit your rom!!!!
Or,
If you don't have a pc.. then install apktool in your device!!!
Install sygwin if you're on windows, then download dsixda kitchen or archi kitchen. Make it compatible for your phone and there you go...making flashable zips from official firmware with root, deodex, init.d etc.
tys0n said:
Install sygwin if you're on windows, then download dsixda kitchen or archi kitchen. Make it compatible for your phone and there you go...making flashable zips from official firmware with root, deodex, init.d etc.
Click to expand...
Click to collapse
Ok i will try it tomorrow
Hi
I Think the title says it all ....
so here is my problem
I have the L29C900B133 update.app file And I want to be able to flash it via TWRP
This Rom is the most complete Rom till today for mate 8 and I think flashing it will solve my problems including applying themes and missing vendor
So please help
How can I make a flashable zip file using this update.app file ??
If there is any method please let me know or send a link
And Before anyone says anything i already looked in huawei update extractor and using it you can make flashable zip files but huawei mate 8 partition map is not available yet and i'm afraid that if i use mate 7 partition map it will brick my phone
tnx in advance
Hi guys, i have a question...
Is possible create a custom rom (remove vendor apps) from XXXXXXXX.tar.md5 file downloaded from sammobile and make your own tar.md5 flasheable Odin file?
For example:
Original firmware:
XXXXXX.tar.md5
1.5 Gb
Removing vendor apps:
XXXXXX_my_firm.tar.md5
800 mb
I am interested in doing this without custom recovery, not zip flashable file, and not root.
xTxMIGUELxTx said:
Hi guys, i have a question...
Is possible create a custom rom (remove vendor apps) from XXXXXXXX.tar.md5 file downloaded from sammobile and make your own tar.md5 flasheable Odin file?
For example:
Original firmware:
XXXXXX.tar.md5
1.5 Gb
Removing vendor apps:
XXXXXX_my_firm.tar.md5
800 mb
I am interested in doing this without custom recovery, not zip flashable file, and not root.
Click to expand...
Click to collapse
Yes, you can do this, but things have changed a bit since this guide was written, you'll have to do some research to see what things have changed in this process from kit kat up to the current available android version. There have been some stock security changes that this guide doesn't cover and won't work with these new securities, but you should be able to figure out how to make this work with those securities if you learn to look in the right places.
https://www.rwilco12.com/forum/showthread.php?tid=92
This will help you create the .tar, you'll just have to figure out how to make the changes you want to make. You'll mostly be working with your system.img once you get it extracted.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE