Since I hadn't seen it posted yet.....
https://www.androidfilehost.com/?fid=24438995911974801
iBowToAndroid said:
Since I hadn't seen it posted yet.....
https://www.androidfilehost.com/?fid=24438995911974801
Click to expand...
Click to collapse
Tried this via ODIN on my Verizon S6 and it just bootloops (over 20 min now). Did I use this wrong?
danman421 said:
Tried this via ODIN on my Verizon S6 and it just bootloops (over 20 min now). Did I use this wrong?
Click to expand...
Click to collapse
Your Rom was OK7 before odin?
tsors said:
Your Rom was OK7 before odin?
Click to expand...
Click to collapse
I am not sure, I was on the latest MM update from Verizon.
My phone got wet a few months back and my NFC has not been able to turn on since. Also, I was also having issues adding fingerprints though I could use fingerprints that were in there before. I thought maybe doing an ODIN flash may help atleast verify it isnt software related.
danman421 said:
I am not sure, I was on the latest MM update from Verizon.
My phone got wet a few months back and my NFC has not been able to turn on since. Also, I was also having issues adding fingerprints though I could use fingerprints that were in there before. I thought maybe doing an ODIN flash may help atleast verify it isnt software related.
Click to expand...
Click to collapse
Ok7 = 5.1.1
Your phone will get in bootlop until Odin tar be released to update it.
Sent from my SM-G920V using Tapatalk
tsors said:
Ok7 = 5.1.1
Your phone will get in bootlop until Odin tar be released to update it.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
$hit! Is there anything I can do to put an old version on then use the OTA updates?
Thank you for the help BTW.
danman421 said:
$hit! Is there anything I can do to put an old version on then use the OTA updates?
Thank you for the help BTW.
Click to expand...
Click to collapse
Unfortunately idk any other way [emoji53]
Can u try contact warranty but it leaves weeks, so...
Sent from my SM-G920V using Tapatalk
tsors said:
Unfortunately idk any other way [emoji53]
Can u try contact warranty but it leaves weeks, so...
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Trying smart switch as I hear it can load the stock firmware. The serial # (aka: IMEI #) I put in says the number is incorrect. Do I remove some of the first digits? It starts with 99000...
danman421 said:
Trying smart switch as I hear it can load the stock firmware. The serial # (aka: IMEI #) I put in says the number is incorrect. Do I remove some of the first digits? It starts with 99000...
Click to expand...
Click to collapse
Mine starts with 9900 too so try it.
Sent from my SM-G920V using Tapatalk
tsors said:
Mine starts with 9900 too so try it.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Not coming up. Any idea when the TAR will be released?
I found a serial number in "about phone", it's different from Imei and I don't find it in anywhere else :/. I think TAR comes this week.
EDIT
Odin tar released today, hope it help your bootloop problem
https://mega.nz/#!NhI0UDoA!AAA6rAA6iF280PGYxlgMVQA_3M0AzAlrvPyVoMbt8kA
Sent from my SM-G920V using Tapatalk
tsors said:
I found a serial number in "about phone", it's different from Imei and I don't find it in anywhere else :/. I think TAR comes this week.
EDIT
Odin tar released today, hope it help your bootloop problem
https://mega.nz/#!NhI0UDoA!AAA6rAA6iF280PGYxlgMVQA_3M0AzAlrvPyVoMbt8kA
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
That's the exact same file as mine. There's nothing wrong with the one I uploaded. If you bootloop, it's unrelated. Try data wipe
iBowToAndroid said:
That's the exact same file as mine. There's nothing wrong with the one I uploaded. If you bootloop, it's unrelated. Try data wipe
Click to expand...
Click to collapse
Your file is ok7, this isnt the 5.1.1?
Did that Marshmallow (PC2) tar work for anyone yet? Thinking about making the switch from rooted OE2 tonight
tsors said:
Your file is ok7, this isnt the 5.1.1?
Click to expand...
Click to collapse
Yes OK7 is 5.1.1
iBowToAndroid said:
Yes OK7 is 5.1.1
Click to expand...
Click to collapse
But i posted the Marshmallow TAR (PC2), so, it's a different file
tsors said:
But i posted the Marshmallow TAR (PC2), so, it's a different file
Click to expand...
Click to collapse
When you posted the Mega link, I thought that you were saying that that was also an OK7 file, same as mine.
danman421 said:
Tried this via ODIN on my Verizon S6 and it just bootloops (over 20 min now). Did I use this wrong?
Click to expand...
Click to collapse
tsors said:
Ok7 = 5.1.1
Your phone will get in bootlop until Odin tar be released to update it.
Click to expand...
Click to collapse
Sigh. No, there's nothing wrong with the file.
You always bootloop when downgrading a major version. Have to factory reset in recovery and then you'll be fine.
iBowToAndroid said:
Sigh. No, there's nothing wrong with the file.
You always bootloop when downgrading a major version. Have to factory reset in recovery and then you'll be fine.
Click to expand...
Click to collapse
can I downgrade to 5.0.2 to get root?
Sent from my SM-G920V using Tapatalk
tsors said:
can I downgrade to 5.0.2 to get root?
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
No
Related
i manually hit the update and bam there it is!
I got it too.
https://dl-web.dropbox.com/get/tmp/...AB_lRsFDs3B-skTcfUEXeo4ocQF02DQC9uE2xetX_p2WA
lion2 said:
I got it too.
https://dl-web.dropbox.com/get/tmp/...AB_lRsFDs3B-skTcfUEXeo4ocQF02DQC9uE2xetX_p2WA
Click to expand...
Click to collapse
Oe2 wonder what it fixes besides memory leak, fixed rotation gyroscope!
Are we sure it fixes the gyroscope issue? I just sent mine back to samsung to get fixed.
skinneejay said:
Are we sure it fixes the gyroscope issue? I just sent mine back to samsung to get fixed.
Click to expand...
Click to collapse
Indeed
I'm glad it fixed your issue Ram9200. Maybe we can put the quick charger issue to bed now.
No workaround for root at the moment?
Won't let me update due to modified software.. How do I go about doing it manually?
blacksantron said:
Won't let me update due to modified software.. How do I go about doing it manually?
Click to expand...
Click to collapse
I had to odin ocf
ram9200 said:
I had to odin ocf
Click to expand...
Click to collapse
Ahhh.. OK that's a project for later.. Thanks
can we get a working link for the file?... Samsung switch is still showing current firmware OCF...
Here's what the update includes
https://community.sprint.com/baw/mo...jive-document?content=/api/core/v2/posts/6365
Can someone look in Settings & tell me what the Kernel build date is? And a screenshot?
Sent from my SM-G925P using Tapatalk
optimummind said:
Can someone look in Settings & tell me what the Kernel build date is? And a screenshot?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Here you go!
Can someone tell me if the standby draining bug and memory leak were fixed?
Installed last night, let's hope this fixes the memory leak issue (although I'm not too hopeful, still waiting for 5.1.1 ..)
blacksantron said:
Ahhh.. OK that's a project for later.. Thanks
Click to expand...
Click to collapse
It will show up in a few days in a .tar file
Added more bloat
Uber
Sprint Music
Scout
Can anyone who updated to OE2 try using Odin3 to go back to OCF? As you know, OCF has successful Root for it that doesn't trip the Knox counter.
If OE2 doesn't get Knox-free Root later, I want to know if downgrading to OCF via Odin is an option.
Sent from my Nexus 5 using Tapatalk
Need help. Im new to samsung. How do manually do the update. Im rooted.
To help the community out with a faster download. Here's the Odin tar
WARNING!!!! ONCE YOU TAKE THE OI1 OR NEWER UPDATE YOU CANNOT ROLLBACK TO ANY FIRMWARE OLDER THAN OI1
How to Install:
Using odin:
Download and install the Samsung drivers
Download the Zip file
Unzip
Download Odin: 3.10.7
Unzip and install
Leave Auto reboot and F. Reset Time checked
Absolutely do not check repartition
Click AP/PDA
Navigate to the .tar
Click Start
First boot takes a while so be patient!
In rare events of issues with incomplete firmware installations, you may need to try a different USB cable.
This is for G925P Sprint S6 Edge
Flash at your own risk
Download Link:
G925PVPS4CPI3
Older Firmware Versions:
Links Removed
Thanks for all the updated firmwares. Much appreciated!!
JediMindTrixx said:
Thanks for all the updated firmwares. Much appreciated!!
Click to expand...
Click to collapse
Oh no problem man, anything to help out
Thanks hommie. You're pretty much faster than Sprint lol.
x70xchallengerx said:
Thanks hommie. You're pretty much faster than Sprint lol.
Click to expand...
Click to collapse
Thanks
@Soooperstar, will this work if you are running wicked one v3.1's rom currently?
Thanks in advance
Sent from my SM-G925P using Tapatalk 2
netengineer said:
@Soooperstar, will this work if you are running wicked one v3.1's rom currently?
Thanks in advance
Sent from my SM-G925P using Tapatalk 2
Click to expand...
Click to collapse
You mean coming from OH1?
Sent from my SM-G925P using Tapatalk
Soooperstar said:
You mean coming from OH1?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Oops, I'm on OH1 already. Lol
Well, maybe you can answer this, can Odin this again over top of OH1? Reason I ask is I am having odd behavior with text messaging. It works sporadically, sometimes I even have to put it in airplane mode and then back on for messages to send and receive.
Sent from my SM-G925P using Tapatalk 2
netengineer said:
Oops, I'm on OH1 already. Lol
Well, maybe you can answer this, can Odin this again over top of OH1? Reason I ask is I am having odd behavior with text messaging. It works sporadically, sometimes I even have to put it in airplane mode and then back on for messages to send and receive.
Sent from my SM-G925P using Tapatalk 2
Click to expand...
Click to collapse
First try to reset your data. Dia ##72786#
Sent from my SM-G925P using Tapatalk
Soooperstar said:
First try to reset your data. Dia ##72786#
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
I tried that and it worked for a bit and then stopped working. I also get missed calls where they don't show in the log but then I get a voice mail.
What should I do?
netengineer said:
I tried that and it worked for a bit and then stopped working. I also get missed calls where they don't show in the log but then I get a voice mail.
What should I do?
Click to expand...
Click to collapse
Then yea I'd probably Odin the firmware if that didn't do it
Sent from my SM-G925P using Tapatalk
Soooperstar said:
Then yea I'd probably Odin the firmware if that didn't do it
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Which firmware should I Odin? (oh and if it isn't OI1, im going to need to find the other one) Also, I won't have to rebuild my whole phone like install the ROM again will I? I just hate doing that. lol
Thanks for the quick response and help.
netengineer said:
Which firmware should I Odin? (oh and if it isn't OI1, im going to need to find the other one) Also, I won't have to rebuild my whole phone like install the ROM again will I? I just hate doing that. lol
Thanks for the quick response and help.
Click to expand...
Click to collapse
Well OI1 is the newest and OH1 roms work on it. So you should be able to Odin over it. I'd make a backup also
Sent from my SM-G925P using Tapatalk
Soooperstar said:
Well OI1 is the newest and OH1 roms work on it. So you should be able to Odin over it. I'd make a backup also
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Great, I am going to Odin the one you posted in this thread. Hopefully it fixes the issues.
Again, I can't appreciate it enough.
netengineer said:
Great, I am going to Odin the one you posted in this thread. Hopefully it fixes the issues.
Again, I can't appreciate it enough.
Click to expand...
Click to collapse
No problem, let me know how it goes
Sent from my SM-G925P using Tapatalk
netengineer said:
Great, I am going to Odin the one you posted in this thread. Hopefully it fixes the issues.
Again, I can't appreciate it enough.
Click to expand...
Click to collapse
I had to call Sprint to reset a few things. It seems to be working okay but only time will tell. Thanks again for the help
Sent from my SM-G925P using Tapatalk 2
soop will we need to flash a custom kernel for it this to take root or will we be good to go along with wickeds rom once updating ro this?
Sent from my SM-G925P using Tapatalk
ronniemation said:
soop will we need to flash a custom kernel for it this to take root or will we be good to go along with wickeds rom once updating ro this?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Wicked ROM has the rooted kernel baked in so once you install or recover, you'll be fine
Soooperstar said:
Wicked ROM has the rooted kernel baked in so once you install or recover, you'll be fine
Click to expand...
Click to collapse
Ok so I'm needing to return my phone to sprint to get a replacement. I am currently on wicked rom with the OI1 firmware. Is there a OI1 stock base unrooted rom I can Odin or what's procedure should I take to get it to complete stock without root? Because I heard you can't downgrade firmwares
powerstroke said:
Ok so I'm needing to return my phone to sprint to get a replacement. I am currently on wicked rom with the OI1 firmware. Is there a OI1 stock base unrooted rom I can Odin or what's procedure should I take to get it to complete stock without root? Because I heard you can't downgrade firmwares
Click to expand...
Click to collapse
Out of curiosity why are you getting a replacement?
Sent from my SM-G925P using Tapatalk
Is there a root method for CPB6 6.0.1 marshmallow? My sprint s6 edge updated to 6.0 after a stock flash and cannot put the mods and tweaks I had previously, so until there is a root method my phone stays stock
Download this file, flash via odin then wait for device reboot.
https://download.chainfire.eu/737/CF-Root/CF-Auto-Root/CF-Auto-Root-zerolte-zeroltexx-smg925f.zip
It works?
I tried this and it stuck on the Samsung boot logo with "Recovery is not seandroid enforcing?
JediMindTrixx said:
I tried this and it stuck on the Samsung boot logo with "Recovery is not seandroid enforcing?
Click to expand...
Click to collapse
Just flash su 2.68 zip, you have to flash stock recovery or twrp again after flashing that root
Sent from my SM-G925P using Tapatalk
JediMindTrixx said:
I tried this and it stuck on the Samsung boot logo with "Recovery is not seandroid enforcing?
Click to expand...
Click to collapse
You have to wait a good bit. Like 5 minutes.
blacksantron said:
You have to wait a good bit. Like 5 minutes.
Click to expand...
Click to collapse
Yeah, just came on. LoL Thanks!
JediMindTrixx said:
Yeah, just came on. LoL Thanks!
Click to expand...
Click to collapse
So, it works for you?
flacosmith said:
So, it works for you?
Click to expand...
Click to collapse
Yes sir! Just didn't wait long enough. Thanks!
Thanks. First boot got stuck on splash screen and I didn't wait long enough and flashed stock until a solution, but checked back in on my post and with someone stating same issue and problem resolved, flashed root again and with in a minute or 2 later booted up verifying the root flash! Thanks a lot!! And, doesn't have the annoying red kernel not se android enforcing. This does work for sprint s6 edge 6.0.1 CPB6!
KRheault said:
Is there a root method for CPB6 6.0.1 marshmallow? My sprint s6 edge updated to 6.0 after a stock flash and cannot put the mods and tweaks I had previously, so until there is a root method my phone stays stock
Click to expand...
Click to collapse
Is this for 925F only? I have 925P (Sprint variant).
Pete
NewYorkLaw said:
Is this for 925F only? I have 925P (Sprint variant).
Pete
Click to expand...
Click to collapse
This is for G925P.
JediMindTrixx said:
This is for G925P.
Click to expand...
Click to collapse
OK, thanks. The file name ends with 925F and I thought it was for another phone.
https://download.chainfire.eu/737/CF...xx-smg925f.zip
EDIT: Just in case anyone is concerned because of my post, this is to let you know it worked for me.
Any suggestions on a recovery to flash onto this now? I tried TWRP 3.0 for the s6 (could not find one for 925p or for s6E) and it did not work.
Pete
NewYorkLaw said:
Any suggestions on a recovery to flash onto this now? I tried TWRP 3.0 for the s6 (could not find one for 925p or for s6E) and it did not work.
Pete
Click to expand...
Click to collapse
Please look at the general section, i have made twrp for both sprint s6 variants. My sources have been passed to the twrp guys also to be made official
Sent from my SM-G920F using Tapatalk
NewYorkLaw said:
OK, thanks. The file name ends with 925F and I thought it was for another phone.
https://download.chainfire.eu/737/CF...xx-smg925f.zip
EDIT: Just in case anyone is concerned because of my post, this is to let you know it worked for me.
Click to expand...
Click to collapse
Glad it worked. Sorry, forgot to tell you to flash the stock 925P recovery or TWRP.
Has anyone here been able to get Wi-Fi hotspot working on the marshmallow update for the Sprint Samsung Galaxy S6 Edge
pickles523 said:
Has anyone here been able to get Wi-Fi hotspot working on the marshmallow update for the Sprint Samsung Galaxy S6 Edge
Click to expand...
Click to collapse
I am posting a new Renegade build this evening, it will include the hotspot fix if your on the 925p. The 920p already has it.
Sent from my SM-G925P using XDA-Developers mobile app
nyfl2004 said:
I am posting a new Renegade build this evening, it will include the hotspot fix if your on the 925p. The 920p already has it.
Sent from my SM-G925P using XDA-Developers mobile app
Click to expand...
Click to collapse
I already got it. I have a post that shows what i did. I also didn't have a working twrp yet either. Everything i found didnt work but i just flashed a working one today.
Sent from my SM-G925P using Tapatalk
pickles523 said:
I already got it. I have a post that shows what i did. I also didn't have a working twrp yet either. Everything i found didnt work but i just flashed a working one today.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Glad you got it sorted out
PD3:
https://www.androidfilehost.com/?fid=312978532265371358
I'll keep this updated with newer versions as they're released. Unfortunately I wasn't fast enough to grab the older ones so if anyone would like to donate them to the cause, that would be great.
iBowToAndroid said:
PD3:
https://www.androidfilehost.com/?fid=24549084345925984
I'll keep this updated with newer versions as they're released. Unfortunately I wasn't fast enough to grab the older ones so if anyone would like to donate them to the cause, that would be great.
Click to expand...
Click to collapse
This is a good idea. I like this. Wish someone had the older version though
Sent from my SM-G935P using XDA Free mobile app
Son Rise said:
This is a good idea. I like this. Wish someone had the older version though
Sent from my SM-G935P using XDA Free mobile app
Click to expand...
Click to collapse
Oh they're out there lol. Just have to find someone willing to upload them
iBowToAndroid said:
Oh they're out there lol. Just have to find someone willing to upload them
Click to expand...
Click to collapse
I would if you link me to them
Sent from my SM-G935P using XDA Free mobile app
@iBowToAndroid Does this Stock_Downgrade firmware actually work to downgrade to PC5? https://www.androidfilehost.com/?fid=24533100289590563
Yes... it also enabled video calling and wifi hotspot for me. The tethering/hotspot menu setting is not there, but the dropdown notification settings can have the hotspot setting added. Havent tried the video calling feature. Also the dialer codes do not work in the ##DATA# format.
FlowingAway said:
@iBowToAndroid Does this Stock_Downgrade firmware actually work to downgrade to PC5? https://www.androidfilehost.com/?fid=24533100289590563
Click to expand...
Click to collapse
So is this the first S7 Edge firmware? And flash with odin?
Sent from my SM-G935P using XDA Free mobile app
Son Rise said:
So is this the first S7 Edge firmware? And flash with odin?
Sent from my SM-G935P using XDA Free mobile app
Click to expand...
Click to collapse
I think it's the 2nd. So the first OTA. I'm not sure you can downgrade though, that's why I was asking @iBowToAndroid
FlowingAway said:
I think it's the 2nd. So the first OTA. I'm not sure you can downgrade though, that's why I was asking @iBowToAndroid
Click to expand...
Click to collapse
Yes you can downgrade... but is has its pros and cons. It is not the same as the sprint ota. It has its pros and cons. Some of which I mentioned above. I used Odin to flash the file, but had to delete the MD5 extension for Odin to acknowledge it.
chrisduclo said:
Yes you can downgrade... but is has its pros and cons. It is not the same as the sprint ota. It has its pros and cons. Some of which I mentioned above. I used Odin to flash the file, but had to delete the MD5 extension for Odin to acknowledge it.
Click to expand...
Click to collapse
Man I didn't even see your post above. Is the battery life improved when going back to it? Ever since PD3 my battery life hasn't been the same.
I haven't charged my phone fully since yesterday, but it certainly hasn't gotten any worse. The icon for LTE has changed to a 4G icon with this downgrade. Thank you for the link uploaded by iBowToAndroid, its great to have hotspot working again.
FlowingAway said:
I think it's the 2nd. So the first OTA. I'm not sure you can downgrade though, that's why I was asking @iBowToAndroid
Click to expand...
Click to collapse
So i can download this one?
STOCK_DOWNGRADE_G935P_PC5.tar
The first firmware that came with the phone. When the s7 edge friends released?
Sent from my SM-G935P using XDA Free mobile app
Son Rise said:
So i can download this one?
STOCK_DOWNGRADE_G935P_PC5.tar
The first firmware that came with the phone. When the s7 edge friends released?
Sent from my SM-G935P using XDA Free mobile app
Click to expand...
Click to collapse
Its not the firmware that came with the phone originally. It's the first OTA. I downloaded it. It's only the AP. No BL, CP, or CSC. So those will still be from PD3. I installed it via Odin and am setting the phone back up right now. So far everything is working ok. Would be awesome to have the bootloader and everything else that goes with it, but if it works it works!
Sent from my SM-G935P using Tapatalk
Found this guy's links over on gsm forums. It's all 3 firmwares.
https://www.androidfilehost.com/?a=show&w=files&flid=56092
I haven't been able to successfully downgrade to PB5. Maybe someone else will have better luck.
Sent from my SM-G935P using Tapatalk
The link I posted above is legit. I cannot get the PB5 firmware to take, I keep getting bootloops, but the uploader has had success downgrading all but the bootloader.
The PC5 package totally works though. Bootloader and all. I just successfully Odin'ed all 4 tars back to PC5 and will remain on PC5 until Samsung and Sprint can get their heads out of their asses when it comes to the poor battery life introduced with the PD3 update.
FlowingAway said:
The link I posted above is legit. I cannot get the PB5 firmware to take, I keep getting bootloops, but the uploader has had success downgrading all but the bootloader.
The PC5 package totally works though. Bootloader and all. I just successfully Odin'ed all 4 tars back to PC5 and will remain on PC5 until Samsung and Sprint can get their heads out of their asses when it comes to the poor battery life introduced with the PD3 update.
Click to expand...
Click to collapse
Nice! Thanks for the find!
And got a bootloop on the PB5 firmware too. I'm assuming it's a corrupted upload.
Does anyone else have PB5 that we can download? I'm aching for my hotspot back. Thanks!
hijewpositive said:
Nice! Thanks for the find!
And got a bootloop on the PB5 firmware too. I'm assuming it's a corrupted upload.
Does anyone else have PB5 that we can download? I'm aching for my hotspot back. Thanks!
Click to expand...
Click to collapse
I suggested that to the uploader and he's convinced the file is fine. Who am I to say, I guess...
Not sure of the validity of this link, but I just found it.
http://rapidgator.net/file/cf276886...c82/SPR-G935PVPU1APB5-20160314104559.zip.html
FlowingAway said:
I suggested that to the uploader and he's convinced the file is fine. Who am I to say, I guess...
Not sure of the validity of this link, but I just found it.
http://rapidgator.net/file/cf276886...c82/SPR-G935PVPU1APB5-20160314104559.zip.html
Click to expand...
Click to collapse
Yeah I've tried that link. Can't download from there without paying. Apparently the Free Version is only a max of 2gb files, and that one is 2.13gb...
hijewpositive said:
Yeah I've tried that link. Can't download from there without paying. Apparently the Free Version is only a max of 2gb files, and that one is 2.13gb...
Click to expand...
Click to collapse
Will it be fine to go back to PB5 fill stock using Odin To Flash Back? Or will it fail?
Sent from my SM-G935P using XDA Free mobile app
hijewpositive said:
Nice! Thanks for the find!
And got a bootloop on the PB5 firmware too. I'm assuming it's a corrupted upload.
Does anyone else have PB5 that we can download? I'm aching for my hotspot back. Thanks!
Click to expand...
Click to collapse
Son Rise said:
Will it be fine to go back to PB5 fill stock using Odin To Flash Back? Or will it fail?
Sent from my SM-G935P using XDA Free mobile app
Click to expand...
Click to collapse
The AP, CP, CSC files all flash fine, the BL will not. And you may get bootloops. I haven't seen anyone other than the original uploader get it to boot up properly.
Finally got the official update to 7.0...
happy update checking =-)
its 1563.03Mb in size.....uploading screenshots in a moment. You don't need to be in the BETA to get the update.
edited.
Can confirm. Its smooth as butter, too.
Sent from my SM-G935T using Tapatalk
Downloading now.
Errrrmerrrgerrrd! Sweet! Downloading now.
I just flashed U firmware like 3 days ago LOL.... gonna revert back since I dont see a firmware download link
updating... :laugh:
Anyone looking for Odin flash files, they are available thru samsung firmware tool, just search xda for it. It's about 2gb to download.
This is what I used: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Sent from my SM-G935T using Tapatalk
Getting mine too
Hey guys, I have a question I hope someone can help me out with. I have the sm-g935v which I flashed to sm-g935u. I'm considering flashing it to sm-g935t since the unlocked firmware will be getting quarterly updates which is unfortunate, and I would like to use samsung cloud, FM radio, and now Nougat. Would I have to factory reset my phone back to the verizon firmware before flashing tmobile's, or can I just flash from my current unlocked firmware straight to tm? Prior to Nougats release, I had downloaded the latest tmobile firmware and tried to flash it with no success so not sure what I did wrong. Any help would be greatly appreciated.
OTA
Won't taking the OTA update certain partitions we don't necessarily want to update? Like the BL, for example? Could this prevent rolling back to 6.0.1 if there are issues? Or does this not matter since we don't have an unlocked BL anyway? Thanksssss
Apparently I do not see that update on my phone as of now
Sent from my iPhone using Tapatalk
vikramdhani said:
Apparently I do not see that update on my phone as of now
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
You are on the U firmware from the screenshot you posted.
D1G1T4L said:
You are on the U firmware from the screenshot you posted.
Click to expand...
Click to collapse
It's a good thing or the bad thing that I am on the U firmware
Sent from my iPhone using Tapatalk
vikramdhani said:
It's a good thing or the bad thing that I am on the U firmware
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
The update is for T-Mobile users using the T firmware. You are on the US Unlocked firmware.
I got this also and updated this morning. Very smooth and loving it! Did OTA update and one thing i noticed after updating i wasn't able to clear my cache like before. When i power down, hold all 3 buttons (power, home and up key) get a screen more like a warning saying installing other firmware's or roms can damage my device. Not the exact wording but similar. Has anyone else tried doing that and got the same warning msg?
D1G1T4L said:
The update is for T-Mobile users using the T firmware. You are on the US Unlocked firmware.
Click to expand...
Click to collapse
Thanks and appreciate your reply
Sent from my iPhone using Tapatalk
Anyone get package disabler to work?
http://forum.xda-developers.com/showthread.php?t=3558242
Odin files for the U firmware users. This will wipe your phone.
justda said:
http://www.mediafire.com/file/cnrtkb...61s9vc_fac.zip
Osin files for the U firmware users. This will wipe your phone.
Click to expand...
Click to collapse
Thank you. Can't I just download the file on the ad card and just flash it
Sent from my iPhone using Tapatalk