Hi guys!
WiFi Auto Connect is an application help you automatically connect to WiFi networks and stop WiFi connection. WiFi Connect on/off fills the identification form with your id and submit the form as soon as your device connects to a configured WiFi network.
[Featured]
Support enable WiFi auto or one click to Enable/Disable WiFi.
Support Network monitor Receiver and Transmitted network data
Support Setting with many useful
Turn on WiFi
+ When device gets unlocked
+ When charging battery
Turn off WiFi
+When Screen Off
+When battery low
+Auto when Airplane mode on
Scheduler(Schedule Alarm to enable WiFi automatic)
+ Schedule time to auto turn on WiFi everyday
+ Schedule time to auto turn off WiFi everyday
+ Enable WiFi auto when launch app
WiFi Auto Connect is application free. Setup and enjoy!.
It is tool useful for your phone to simple handle on Android.
If you like WiFi Auto Connect app don't forget rate 5 star ★★★★★ or review. They are appreciate for me. Thank you so much.:good:
this app and also similar app work only if airplane mode is disable
how make it work when airplane mode is enabled?
Related
Hello friends,
Presenting my first App - AutoCon
AutoCon will turn off the connections when screen goes off and turn them back on when screen turns on - Saves battery by turning off connections when you don't need them, Saves data usages. You can still be connected to internet by activating networks periodically when screen remains off!
AutoCon helps user to control the connections like Data, WiFi, Bluetooth with the activities of screen. This will prevent the unwanted usages of the network connections which leads to improve battery life!
Basic Principle :
It has been observed that the internet connections (WiFi and Data) are one of the primary reasons of battery drain. Also they consume battery when user don't need them. Typically users keep the mobile always connected to internet but majority of users don't require the always-on connection, but its sufficient for them to connect to internet when required.
Its painful for user to turn on the connection when needed and turn it off when done. Here comes AutoCon.
AutoCon will turn off the connections when screen goes off and turn them back on when screen turns on!
Also for countries like India where mobile data plans are still expensive, AutoCon will prevent the exes usages of mobile data by disabling it when its not required.
Main Features :
- Control Data, WiFi and Bluetooth connections
- Turn Off the connections when screen goes off
- Turn On connections when screen turns on
- Supports configuration of intervals after which connections are to be turned on/off when screen goes on/off
- Periodically activate connections in background (say every 1 hour, configurable) when screen is off so that user will not be totally disconnected
- Disable WiFi when its not connected to any network
- Disable mobile data when WiFi is connected
- Time Range: Connections will stay off in given time range (say at night 11 pm to 6 am, I don't want AutoCon to enable connections when I unlock the screen)
- When a particular app is running, do not disconnect when screen is off (for example I am speaking on Viber, so I want data to remain connected always even though screen is off)
- Everything is configurable - every interval, every setting.
Download
Get it free on play store
https://play.google.com/store/apps/details?id=com.suvi.autoconlite
If you like my work, support me by buying the full version
https://play.google.com/store/apps/details?id=com.suvi.autocon
More features coming soon.
I have posted the same app in wider audience. Please have your comments/feedback into the main thread.
http://forum.xda-developers.com/android/apps-games/autocon-smart-connection-manager-t2903112
On most android phones you can stop them from connecting to open WiFi, so it only connects to your home WiFi and other predefined locations.
The Z3 has an option on the Stamina page:
Location based WiFi- WiFi activated automatically when in range of a saved WiFi network.
I've played with this but i don't get it. If that's activated and I've turned WiFi off it doesn't seem to turn WiFi on, and if WiFi is turned on it'll connect anyway so this option is redundant.
The power policy makes no difference, and I've added my WiFi point to the list.
Maybe you need to turn on "background scanning" in advanced settings which checks for WiFi in intervals even when WiFi set to off.
If you leave wifi enabled the feature will automatically turn it off when you are not near the location of one of your saved networks, and then back on when you are again near that location. Don't manually turn off wifi, the feature won't turn it back on in that state.
I was wondering the same thing. I'll test this out today.
The description should say that WiFi will turn off when not in range of saved networks.
Sony makes it sound like we need to have WiFi off, and it'll turn back on automatically when in range.
Sent from my D6616 using XDA Free mobile app
shilent said:
The description should say that WiFi will turn off when not in range of saved networks.
Sony makes it sound like we need to have WiFi off, and it'll turn back on automatically when in range.
Click to expand...
Click to collapse
Exactly, especially when another option, on the advanced wifi option page, says:
"Scanning always available: Let google's location service and other apps scan for networks, even when wi-fi is turned off"
because it gives the impression you can enable that, turn wifi off, but use the "location based" option to override your wifi disable to turn it back on again.
Scanning always available is a battery killer.
What I have noticed is that my Wi-Fi turns off when I leave my residence to work and stays off the entire time. It doesn't turn on automatically when you come home until something runs a scan of your location. I believe that is how it works and when it senses that you're near where your WiFi is it will turn it on automatically.
Hey, everyone. Here's a small app I made for myself and figured I might as well post it for anyone else who may want it. It's fully free, and does not track any of your information (which some similar apps out there required permissions I didn't view as necessary for this kind of app, and therefor a little fishy). I made the app to be a convenience thing and battery saver (I only want my wifi adapter to be on at home, and not turn back on again at work), so I'm open to any feature requests people may have to make it more convenient for you.
I call it Auto Wifi, here's a Play store link: https://play.google.com/store/apps/details?id=com.psiincgames.autowifi
Going on the description I wrote for the Play Store:
Auto Wifi controls the wifi on your phone for you, turning it on and off as needed. This is both convenient and saves you battery life. Want to have your wifi turn on at home, but not at school or work? We can do that for you.
You have full control over how it will work, with control over everything from the scan interval times to which wifi ssid's to connect to. The optional notification setting helps keep Auto Wifi open in the background, and is as non-intrusive as possible. We hate unnecessary notifications just as much as you do.
It operates using 3 selectable modes:
"Auto on, auto off" - this mode will shut your wifi off when no signal nearby saved access point is detected, and turns it on whenever any wifi access point you've connected to before is nearby.
"Selective on, auto off" - this mode will only automatically turn your wifi on when your device can connect to an access point from a list that you select. Great for when you want your phone to connect to wifi at home but not at school or work. It will only shut your wifi off automatically when it isn't connected to anything, so you can still manually turn on your wifi without disruption.
"Auto off only" - lastly, this mode will only automatically turn wifi off, so you can have full manual control over when it turns back on again.
Description of permissions required:
"Run at startup" - as the name implies, this is needed so we can start Auto Wifi at device start up.
"Access Network State" and "Access Wifi State" - these are needed so we can check if you are connected to a wifi network. This lets us know when to turn wifi on or off, otherwise known as the 'Auto' part of Auto Wifi.
"Change Wifi State" - this is required so we can actually turn your wifi adapter on and off for you, otherwise this app would be pointless.
I've noticed my S7 will not join an existing wifi area when locked / sleep mode.
I have a WOL task that runs when the phone reconnects to a wifi access point. I have to turn the screen on then I notice the "connected to wifi" message come up.
I have excluded tasker from batter optimisation, but I don't think that is the problem. Also, wifi on during sleep is enabled.
Use Wi-Fi+
The Honor 9 comes with many features to help your phone save time and resources. One of my favorite is Wi-Fi+. This enhanced WiFi system provides three key features that will make you have a better internet experience.
Switch Between WiFi and Mobile Data
Evaluate Wi-Fi connectivity and switch between Wi-Fi and mobile data for the best network connection. This may increase data usage.
Turn on/off WiFi Automatically
Turn on Wi-Fi when in range of a known Wi-Fi network and connect to it.
Evaluate available Wi-Fi networks
Automatically evaluate network connectivity and suspend auto-connect for saved networks that cannot connect to the internet.
When I'm going for a long drive and maybe listening to music, I'll turn my Wi-Fi off to save battery. When I get home, I don't have to worry about forgetting to reconnect to save my data. My Wi-Fi will automatically turn back on and get me connected. This is my favorite feature of Wi-Fi+
Definitely turn this feature on while you are using your Honor 9.