Original Shield tablet stock updated to latest. now can't boot. - Shield Tablet Q&A, Help & Troubleshooting

Hi, I ran into an issue today.
Upgraded the tablet this morning, update seemed to go fine. I then went through with the SD card format to integrate it.
When I next checked the tablet, it was off. It now won't boot.
I tried holding volume up, down, both at the same time with power, but nothing.
when plugged into the computer via usb, holding volume down+up and power will cause the usb connection sound to happen, but nothing seems to happen on the tablet itself.
can anyone help?

Have you pressed the power button alone for 10-20 seconds?
For the boatloader mode, you need to hold down volume and then tap and release the power button while continuing to hold volume down.
Sent from my SGH-I337M using XDA Free mobile app

An Droid said:
Have you pressed the power button alone for 10-20 seconds?
For the boatloader mode, you need to hold down volume and then tap and release the power button while continuing to hold volume down.
Sent from my SGH-I337M using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your reply.
Niether of those actions have any effect., unfortunately

Related

[Q] what is the best way to boot into recovery/BL 100% of the time

I know it's Power + Vol Down while booting up to get to the BL, but the soft buttons blink 6 times and then nothing happens.
Then i let go of the buttons, try it again, and nothing happens.
SOmetimes holding Power+volDown works, sometimes it doesnt.
What am i missing here
a program called quickboot. Only works for rooted phones
Or
connect phone to computer
adb reboot recovery
adb reboot bootloader
It's very iffy for me, the best is to use a short cut like quick boot or have an extended power menu. But if you must, power down your device, hold volume down and power for 5 seconds (I countdown like the shuttle is taking off lol) then on 5 release power but hold volume down... Should pop up every time
Sent from my Cleaned up HTC Jelly Bean
yea i've been using adb, but that's a hassle when im not at home
i guess i'll be giving the app a shot, but what am i doing wrong with the key presses?
should i do it with the phone off?
while rebooting?
from the OS?
what
how i do it and what i originally read to be the correct button combination is hold down power and volume down for 5 seconds, then release power button while holding volume. should work.
zoltrix said:
yea i've been using adb, but that's a hassle when im not at home
i guess i'll be giving the app a shot, but what am i doing wrong with the key presses?
should i do it with the phone off?
while rebooting?
from the OS?
what
Click to expand...
Click to collapse
Turn off fastboot in power settings, if it's on when you power off the phone its like sleep, it's not actually off and that would be why it's not working for you.
Sent from my HTC One X using xda premium
If you are okay with flashing a better, faster rom compared to stock, CleanROM has this feature from the power menu. Works flawlessly.
Before that, I used adb commands.
I hold down the vol down button, then press and hold the power button for about 2 sec, continuing to hold down the vol down button until you are in the bootloader.
So the vol down button is the trigger for the bootloader.
And you have to have fastboot turned off.
Sent from my HTC One X using xda app-developers app

Will not go into bootloader

I've held the vol down and the power button, for as long as 10 minutes. The phone does nothing. I release them and the phone starts normally. The touch buttons at the bottom blink 4 - 5 times, and that is all that happens.
What is going wrong here? I am on 1.85. No root, no mods etc.
echodreamz said:
I've held the vol down and the power button, for as long as 10 minutes. The phone does nothing. I release them and the phone starts normally. The touch buttons at the bottom blink 4 - 5 times, and that is all that happens.
What is going wrong here? I am on 1.85. No root, no mods etc.
Click to expand...
Click to collapse
In power settings uncheck fastboot and then try again.
Sent from my HTC One X using xda premium
No change. Touch buttons do not blink, but the phone simple never starts up until I release them.
Start by holding the volume down button in, then the power button. After the the soft lights blink a few times & the screen goes black, immediately release the power button "only" while still holding in the volume down key. If I had to guess your not releasing the power button.
Sent from my HTC One X using xda premium
doin-it said:
Start by holding the volume down button in, then the power button. After the the soft lights blink a few times & the screen goes black, immediately release the power button "only" while still holding in the volume down key. If I had to guess your not releasing the power button.
Click to expand...
Click to collapse
I was going to say something similar. You don't even have to hold the power button that long (until the softkeys blink), just 3 seconds or so. Then release the power button but NOT the volume down button. Keep holding vol down until you are in bootloader. This, and make sure "fast boot" is unchecked in Settings>Power as previously mentioned also.

How to boot into recovery?

I'm trying volume up, home, and power. No luck. Am I doing something wrong? Thanks!
Sent from my SGH-T769 using Tapatalk 2
Got it. Volume up and down at the same time, and the power button. I kept them held down and the phone just kept intermittently vibrating. I had to let off the buttons after the first vibration.
Power on while holding down BOTH volume buttons when NOT plugged into the computer USB (because this is also the way to get into download mode).
Sent from my Polaroid Tablet using Tapatalk HD
Had this problem too when it would just vibrate the whole time. good thing I learned the differences.
Sent from my SGH-T769 using xda app-developers app
I tried this (both volume buttons and power without usb), but it just boots normally. CWM doesnt come up. I'm stuck in a boot loop right now so I can't use my phone unless I can get into CWM.
marchingknight11 said:
I tried this (both volume buttons and power without usb), but it just boots normally. CWM doesnt come up. I'm stuck in a boot loop right now so I can't use my phone unless I can get into CWM.
Click to expand...
Click to collapse
Pull the battery and put it back in. Then hold vol - & vol + and power until the 'samsung' logo appears. Then release all. I use two fingers to hold both volume buttons and then my thumb for the power button. I've heard of people thinking they are capable of holding both volume buttons with one finger lol and they usually have issues. This is how you get into recovery regardless of whether you have cwm or factory recovery.
anactoraaron said:
Pull the battery and put it back in. Then hold vol - & vol + and power until the 'samsung' logo appears. Then release all. I use two fingers to hold both volume buttons and then my thumb for the power button. I've heard of people thinking they are capable of holding both volume buttons with one finger lol and they usually have issues. This is how you get into recovery regardless of whether you have cwm or factory recovery.
Click to expand...
Click to collapse
wait til samsung logo then JUST release the POWER BUTTON.
m stuck plz help i can't go in to recovery mode in my samsung galaxy s blaze 4G i tried using the volume button nd the power button but it keeps on vibrating nd untill i won't go in the recovery mode my mob will not start plz help

[Q] Volume Down + Power button doesn't work

Pretty self explanatory post. I'm trying to boot my phone into bootloader mode, but holding power and volume down just reboots it normally.
I have a AT&T HTC One X. Any ideas?
It's a timing issue. There are two ways you can do it.
While device is switched on
Hold the volume down button, then hold the power button (so you're holding them together), the button lights will start to flash, they'll stop flashing and the screen will go blank, after a couple of seconds let go of the power button but continue to hold the volume down button until the phone boots into the bootloader.
While the device is switched off
Hold the volume down button, then hold the power button (so you're holding them together), after a couple of seconds let go of the power button but continue to hold the volume down button until the phone boots into the bootloader.
It's very important to not let go of the power button until you reach the bootloader with either of those methods.
Sent from my Evita
I learned that the hard way. Lol
Sent from my Inspire 4G using xda app-developers app
This is almost always a matter of pilot error. Unless the phone is bricked, or an actual physical malfunction of the vol button, it will always be able to go to bootloader. Just follow timmaaa's suggestion above. The primary error, is that folks don't realize you are supposed to let go of the power button but keep holding vol down. Understandable, since the usual direction is just to "press power and vol down".

How to power on a phone with a broken power button?

My LG G2's power button and volume rockers appear to have stopped working. My phone is off and USB debugging is off. Is there any way I can power my phone on? Thanks!
Cheesejam said:
My LG G2's power button and volume rockers appear to have stopped working. My phone is off and USB debugging is off. Is there any way I can power my phone on? Thanks!
Click to expand...
Click to collapse
Install some imaginary buttons from Google Play. Maybe it will help
Sent from my SM-N900 using Tapatalk Pre
nam555 said:
Install some imaginary buttons from Google Play. Maybe it will help
Sent from my SM-N900 using Tapatalk Pre
Click to expand...
Click to collapse
The problem is that my phone is off! And I can't turn it on without using the power button it seems.
Is it the button itself that is broken or the functionality of the electronics? I once had to replace the physical button after the guts had fallen out of it. Got to the last step of rooting my phone, went to press that rocker button and ...nothing. I always used the virtual, on screen button for photos, so I never even realized that it was dead. They can usually find them somewhere online
Ryborg said:
Is it the button itself that is broken or the functionality of the electronics? I once had to replace the physical button after the guts had fallen out of it. Got to the last step of rooting my phone, went to press that rocker button and ...nothing. I always used the virtual, on screen button for photos, so I never even realized that it was dead. They can usually find them somewhere online
Click to expand...
Click to collapse
I think it is the electronics because at one point my power button/volume buttons were randomly getting pressed without my input. But, I really don't know for sure.
Cheesejam said:
I think it is the electronics because at one point my power button/volume buttons were randomly getting pressed without my input. But, I really don't know for sure.
Click to expand...
Click to collapse
That's out of my realm of knowledge then, might be time for a new ride... Sorry and good luck
Try charging your phone. It will boot Go to recovery and then click reboot phone.
Or
http://forum.xda-developers.com/showthread.php?t=1603616
Sent from my Xperia Live with Walkman using XDA Premium 4 mobile app
excellent question
This is some excellent question.
Because these days phones comes without removable battery.
I have the same problem but in a different way.
Suddenly my phone Asus zenfone 5 got switched off while operating the phone and unable to power on using power buttons only.
I dont know what to do.
previously we have the option to remove the battery and place again. But here i am not having a chance.
so,
please guys help me.
Oh bro don't take panic. Don't know about methods to do this but I think power button is repaired in less than 2$ everywhere (all around the world)
Good luck
Sent from my GT-S7582 using XDA Premium 4 mobile app
Reboot phone with no power button
Cheesejam said:
My LG G2's power button and volume rockers appear to have stopped working. My phone is off and USB debugging is off. Is there any way I can power my phone on? Thanks!
Click to expand...
Click to collapse
All phones have a recovery mode which can be accessed by pressing volume up or down (only one) while inserting the USB cable. This powers on the phone for download mode allowing you to restore software.
As mentioned best method is to repair the faulty button but I would try restoring STOCK image/rom first.
Possible solution
Hope that this trick could help someone.
Situation:
- broken power button
- lg g2 off
- WORKING volume button
After lots of tries to power on that damned phone something happens:
1) Charge g2 until 100%.
2) Hold both volume button (UP AND DOWN) and insert power supply
3) be ready to disconnect the power supply immediatly when the lg logo appears
4) disconnect charger (Screen will goes off) keep holding volume button
5) reinsert power supply and when screen goes on release and rehold again both volume button.
And... Magically lg g2 starts!
I really don't know why this procedure works but i currently use this trick to power on the device when accidentally my lg goes to 0% -.-'
Some advice:
Before doing all this combination i've tried holding both volume button when the device was off.. For some reason the red led (charging color) flashed five times then this trick works. Don't know if was just a coincidence. But triying can't do any damage!
So... HOLD FOR MORE TIME YOU CAN THOSE ****** BUTTON.
And pray.
Hope that this will help someone
bino29s said:
Hope that this trick could help someone.
1) Charge g2 until 100%.
2) Hold both volume button (UP AND DOWN) and insert power supply
3) be ready to disconnect the power supply immediatly when the lg logo appears
4) disconnect charger (Screen will goes off) keep holding volume button
5) reinsert power supply and when screen goes on release and rehold again both volume button.
Click to expand...
Click to collapse
this worked for me. although I found that I did not have to reinsert the power supply nor did I have to rehold both volume buttons again at the end.
so 5) when screen comes on, release the two volume buttons.
Install Volume unlock, it'll make your volume button unlock the screen
Cheesejam said:
My LG G2's power button and volume rockers appear to have stopped working. My phone is off and USB debugging is off. Is there any way I can power my phone on? Thanks!
Click to expand...
Click to collapse
Use ADB Commands to first connect your phone with your pc using a terminal and then use some other adb commands to power it on.
Google for some ADB commands.
Hit thanks
Lg g2 D802 here, non-responding power button. I power on my Phone just by plugging in the power cable and pulling it out when the logo appears. Nothing else. Screen on/off by knock-on funktion.
bino29s said:
Hope that this trick could help someone.
Situation:
- broken power button
- lg g2 off
- WORKING volume button
After lots of tries to power on that damned phone something happens:
1) Charge g2 until 100%.
2) Hold both volume button (UP AND DOWN) and insert power supply
3) be ready to disconnect the power supply immediatly when the lg logo appears
4) disconnect charger (Screen will goes off) keep holding volume button
5) reinsert power supply and when screen goes on release and rehold again both volume button.
And... Magically lg g2 starts!
I really don't know why this procedure works but i currently use this trick to power on the device when accidentally my lg goes to 0% -.-'
Some advice:
Before doing all this combination i've tried holding both volume button when the device was off.. For some reason the red led (charging color) flashed five times then this trick works. Don't know if was just a coincidence. But triying can't do any damage!
So... HOLD FOR MORE TIME YOU CAN THOSE ****** BUTTON.
And pray.
Hope that this will help someone
Click to expand...
Click to collapse
It souds like witchcraft but it works!

Categories

Resources