Related
so here i am , i was trying o]to flash stock rom via odin and i used .pit file, it started .. and then it said re-partition operation failed.... now when i click on the power button the screen shows a light but there is no samsung logo, i cannot go into recovery mode but i can go into download mode, i also tried to flash the PDA from 4 shared but it also didn't work... please help me.....
try to Uncheck re-partition or look here showthread.php?t=1552792
/ Ech \ said:
so here i am , i was trying o]to flash stock rom via odin and i used .pit file, it started .. and then it said re-partition operation failed.... now when i click on the power button the screen shows a light but there is no samsung logo, i cannot go into recovery mode but i can go into download mode, i also tried to flash the PDA from 4 shared but it also didn't work... please help me.....
Click to expand...
Click to collapse
there are differences between s5830/s5830i
find a rom for s5830i only
check from fastboot if your phone is unlocked (S-off)
(maybe you try to flash a rom that requires S-off ??)
Code:
fastboot oem status
fastboot oem unlock
do you have a nandroid backup? it can help you to revert to stock rom
you should have one always do a backup before make changes !!
links
http://www.4shared.net/source.html?token=0e95ccde61c2962e03ea
(to flash read instructions...)
http://www.4shared.net/s5830i
if you have nandroid backup this can help
ruscan.calin said:
there are differences between s5830/s5830i
find a rom for s5830i only
check from fastboot if your phone is unlocked (S-off)
(maybe you try to flash a rom that requires S-off ??)
Code:
fastboot oem status
fastboot oem unlock
do you have a nandroid backup? it can help you to revert to stock rom
you should have one always do a backup before make changes !!
links
http://www.4shared.net/source.html?token=0e95ccde61c2962e03ea
(to flash read instructions...)
http://www.4shared.net/s5830i
if you have nandroid backup this can help
Click to expand...
Click to collapse
wtf ???? what is this 4shared.net?
new-aces.blogspot.com is my blog....what is it doing on 4shared.net
anw plz help me man i took my phone to a repair shop and he said he wasn't able to fix now when i turn it on i can see the samsung logo for like 5 secs and then it turns off again, then samsung logo 5 secs then turns off again i tried flashing pda.tar and it flashed successfully but still cannot turn on my phone help?
ObS3SSioN said:
try to Uncheck re-partition or look here showthread.php?t=1552792
Click to expand...
Click to collapse
i tried everythin.... not working now i can see samsung logo but for secs and then the phone turns off by itself and then samsung logo for 5 secs and then the phone turns off again so on....
are there any working stock roms for the s5830i and how to flash them , dont give me pda.tar it isnt working i need an official stock rom plz to fix the brick.. ty
/ Ech \ said:
wtf ???? what is this 4shared.net?
new-aces.blogspot.com is my blog....what is it doing on 4shared.net
anw plz help me man i took my phone to a repair shop and he said he wasn't able to fix now when i turn it on i can see the samsung logo for like 5 secs and then it turns off again, then samsung logo 5 secs then turns off again i tried flashing pda.tar and it flashed successfully but still cannot turn on my phone help?
Click to expand...
Click to collapse
maybe this thread can help you
this ROM seems to be a good one for you phone
-in Windows7/Vista open Odin as administrator
-try other version of Odin
-try to enable "re-partition"
-never use ROM Manager this can destroy your phone
-never use a ROM made for s5830 (you have s5830i)
---------- Post added at 06:03 PM ---------- Previous post was at 05:48 PM ----------
/ Ech \ said:
are there any working stock roms for the s5830i and how to flash them , dont give me pda.tar it isnt working i need an official stock rom plz to fix the brick.. ty
Click to expand...
Click to collapse
believe me a lot of people have problems with this model when flashing
try here for stock rom
enter s5830i in search field
(you need subscription to enable download mode)
also I made a thread for Samsung stock roms here
but there is nobody to answer :laugh:
ruscan.calin said:
maybe this thread can help you
this ROM seems to be a good one for you phone
-in Windows7/Vista open Odin as administrator
-try other version of Odin
-try to enable "re-partition"
-never use ROM Manager this can destroy your phone
-never use a ROM made for s5830 (you have s5830i)
---------- Post added at 06:03 PM ---------- Previous post was at 05:48 PM ----------
believe me a lot of people have problems with this model when flashing
try here for stock rom
enter s5830i in search field
(you need subscription to enable download mode)
also I made a thread for Samsung stock roms here
but there is nobody to answer :laugh:
Click to expand...
Click to collapse
hey man thanks for ur support but roms aren't flashing properly , maybe i need to split em using splitfus, anw if u can tell me how to get into recovery mode using a different method , cz i tried to get into recovery mode volume+home+power and it aint working so if there is any other way using pc or something , that would be great , thank u
/ Ech \ said:
hey man thanks for ur support but roms aren't flashing properly , maybe i need to split em using splitfus, anw if u can tell me how to get into recovery mode using a different method , cz i tried to get into recovery mode volume+home+power and it aint working so if there is any other way using pc or something , that would be great , thank u
Click to expand...
Click to collapse
to flash by Odin put your phone in download mode
Download Mode : Home + Vol Dn + Power Button this is not working ?
if not try to remove battery for a few s then put it back
what is your Odin version ?
here is Odin from sammobile site
to flash enter download mode
in Odin
OPS – inlcuded with Odin from sammobile site
Boot – DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.md5
Phone – MODEM_S5830iXXLB1_REV00.tar.md5
PDA – PDA_S5830iJPLB1_REV00.tar.md5
CSC – GT-S5830i-MULTI-CSC-OJPLA5.tar.md5
EFS -None
OnePackage - None
Click to expand...
Click to collapse
something like this maybe file names are not the same I gave an idea only
if this is not working check "re-partition" then flash again
ruscan.calin said:
to flash by Odin put your phone in download mode
Download Mode : Home + Vol Dn + Power Button this is not working ?
if not try to remove battery for a few s then put it back
what is your Odin version ?
here is Odin from sammobile site
to flash enter download mode
in Odin
something like this maybe file names are not the same I gave an idea only
if this is not working check "re-partition" then flash again
Click to expand...
Click to collapse
thanks bro i was able to fix it i flashed xxkl1 and used pit file and csc and phone and pda and ticked repartition.. ty anw ! i hit the thanks button i really appreciate ur support
/ Ech \ said:
thanks bro i was able to fix it i flashed xxkl1 and used pit file and csc and phone and pda and ticked repartition.. ty anw ! i hit the thanks button i really appreciate ur support
Click to expand...
Click to collapse
Man I like your last answer you solved your problem ! Good job !
I like to contribute solving problems because I hate problems :laugh:
I have had an Android phone made a custom ROM
and.. destroyed the phone with overclocking ...
now I have to buy another phone and Galaxy Ace/ Nexus is an option
Galaxy Ace is a good phone but there are problems when flashing so be careful when flashing again!
there are options to play with when flashing like check re-partition or use correct version of Odin
and sammobile.com is best site to check when having troubles !
[highlight]ALL MODEMS HERE ARE OFFICIAL by SAMSUNG and for the SM-N9005[/highlight]
To decode what the letters/numbers of the modems mean, click here:
http://forum.xda-developers.com/showthread.php?t=1356325
FLASH GUIDE:
Switch off your device completely.
Connect to PC and Power on your phone in Download Mode (Vol Down+Home+Power)
Start Odin v3.09 (be sure it recognised your phone and show ID:COM port number)
Untick Autoreboot
Flash MODEM.BIN (CP slot - unzip it first)
Reboot once again into Download Mode using Vol Down+Home+Power
Tick Autoreboot and flash NON-HLOS.BIN
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off
DOWNLOAD MODEM+NON-HLOS N9005:
N9005XXUGBPB2 :good:New! as of 3/3/2016 Latest [Lollipop]!
Others
N9005XXUGPOK2
N9005XXUGBNL8
N9005DXUGNK1
N9005ZHUENJ1
N9005XXUGNI3
N9005DXUGNH1
N9005XXUGNG1
N9005XXUFNG2
N9005XXUENE3
...uploading previous modems
For bootloaders, older modems and stock ROM's, try here:
https://idlekernel.com/flash-tools/firmware/hlte_SM-N9005XX/
reserved
reserved last
help me
i follow all the step.... but still cannot success
Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
odin shows "PASS" message? what error do you see?
Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
Try taking out and put back your battery before flashing.
Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2
MuhammadZeeshan7 said:
Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2
Click to expand...
Click to collapse
no you can't... try re-flashing a new one
I have downloaded both g2 and g1 but got md5 error on each.
Questions
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?
Camela said:
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?
Click to expand...
Click to collapse
1- No
2- Yes
3- Not needed, i will soon upload other modems too. Anyway you can't go back from a newer version (i never needed to test it but people said it's almost impossible to do)
encho said:
I have downloaded both g2 and g1 but got md5 error on each.
Click to expand...
Click to collapse
Remove MD5 extension and unzip the tar file using winrar and then you will find two files, flash modem.bin.
---------- Post added at 07:11 PM ---------- Previous post was at 06:52 PM ----------
Tried lots of time, nothing worked out for me, still having MJ7 the old version..... Can anyone help???
Failed
finally i got whole flash process to work, but its still the same baseband version
Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
sometimes baseband doesn't flash correctly, try again :fingers-crossed:
Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over
KaszasM said:
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over
Click to expand...
Click to collapse
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
not at all, I usually flash once and it's ok. Sometimes you need to flash twice or even more.
zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
the diffrence is in the powr off way !! if you turn your device out usually way ,you flash you dont see the new baseband version in the rom , before flash you need to FORCE POWER OFF - HOLD POWER OFF button until BLACK SCREEN ,than right into download mode and flash ,and you get/see new baseband in rom too, if you dont do it like that then the baseband in rom gonna stay the same/old
worked...
Repeated the procedure twice ( 4 flashes ) and then it worked...
Lord Eko said:
no you can't... try re-flashing a new one
Click to expand...
Click to collapse
You were wrong actually. I was having Unknown baseband and flashing any KK modem didn't help.
Now i'm on KK and using JB modem.
[Q] Bootloop Galaxy J1
hi i need help im new to this forum
yesterday i just bought Galaxy J1 the new realeased phone and today i tried to root my phone so i search google i thought i can root my phone by following this thread http://forum.xda-developers.com/galaxy-s4-att/general/how-to-root-i337ucufnj4-4-4-4-11-13-2014-t2939553 but end up stuck at bootloop with red exclamation mark,please help!
note
-i can get into Download Mode and default cwm mode
MiHawkBeast said:
hi i need help im new to this forum
yesterday i just bought Galaxy J1 the new realeased phone and today i tried to root my phone so i search google i thought i can root my phone by following this thread http://forum.xda-developers.com/galaxy-s4-att/general/how-to-root-i337ucufnj4-4-4-4-11-13-2014-t2939553 but end up stuck at bootloop with red exclamation mark,please help!
Click to expand...
Click to collapse
That thread is for a totally different phone...
Which model of the SM-J100(...) is yours?
LS.xD said:
That thread is for a totally different phone...
Which model of the SM-J100(...) is yours?
Click to expand...
Click to collapse
Thank you for reply, My model is SM-100H ,anything i can do to revive my phone?
MiHawkBeast said:
Thank you for reply, My model is SM-100H ,anything i can do to revive my phone?
Click to expand...
Click to collapse
Can you boot to download mode?
If so try connecting to Samsung kies application for windows and see if it the emergency recovery will work on your device, it depends if Samsung has made your stock firmware available in kies yet. If they have added support for it in kies or if the stock firmware has been made available for download then you should be able to use kies to do the recovery or if the firmware is available online somewhere or at sammobile.com then you can download it and use Odin to recover it. I don't know if your stock firmware is available anywhere though but you can start a search if you can find out what the build number of your stock firmware is, find your build number and do a search for it, or you can try finding someone that has been successful in rooting theirs and have them use terminal emulator to pull a ROMdump of the stock ROM into an .img file that can be used to flash to your device as long as PC recognizes your device and your device can get into the right mode.
N_psycho_PD_uh? said:
Can you boot to download mode?
If do try connecting to Samsung keys application for windows and see if it the emergency recovery will work on your device, it depends if Samsung has made your stock firmware available in kies yet. If they have added support for it in kies or if the stock firmware has been made available for download then you should be able to use kies to do the recovery or if the firmware is available online somewhere or at sammobile.com then you can download it and use Odin to recover it. I don't know if your stock firmware is available anywhere though but you can start a search if you can find out what the build number of your stock firmware is, find your build number and do a search for it, or you can try finding someone that has been successful in rooting theirs and have them use terminal emulator to pull a ROMdump of the stock ROM into an .img file that can be used to flash to your device as long as PC recognizes your device and your device can get into the right mode.
Click to expand...
Click to collapse
thanks for reply, Kies not recognize my phone at all no sulutions,but i found my model firmware from this website samsungupdates.com and the size is 500mb do you think i need to install the firmware using Odin?note Odin did regc my phone.
Yes, use Odin
MiHawkBeast said:
thanks for reply, Kies not recognize my phone at all no sulutions,but i found my model firmware from this website samsungupdates.com and the size is 500mb do you think i need to install the firmware using Odin?note Odin did regc my phone.
Click to expand...
Click to collapse
Any progress in here?
Did you manage to fix it?
Sent from my XT912 using XDA Free mobile app
Until today there is no way to root Samsung J1. For data backup and restore you can use Helium, but its function is limited.
hello sir i am also facing the same problem( bootloop with a red exclamation mark, i tried to root my phone using odin and that's how i ended up having a bootloop... i tried another solution , downloaded a custom prerooted rom called gennext j1 followed the same instuctions of flashing through odin still the problem is not fixed .. plz help me out
kaushikfab said:
hello sir i am also facing the same problem( bootloop with a red exclamation mark, i tried to root my phone using odin and that's how i ended up having a bootloop... i tried another solution , downloaded a custom prerooted rom called gennext j1 followed the same instuctions of flashing through odin still the problem is not fixed .. plz help me out
Click to expand...
Click to collapse
Download your complete stock firmware for your device's model number and flash it through Odin.
Then find the correct rooting method and start over.
I was crying, the problem was on my mom's Galaxy J1. Everytime i want to start that phone, just logo and red exclamation mark and that was so awkward. I hate this because i just can go to the download mode ONLY. Please help :crying::crying::crying:
Vscxsxm said:
I was crying, the problem was on my mom's Galaxy J1. Everytime i want to start that phone, just logo and red exclamation mark and that was so awkward. I hate this because i just can go to the download mode ONLY. Please help :crying::crying::crying:
Click to expand...
Click to collapse
If you can get to download mode then you can download your stock firmware file and flash it through Odin. Look it up, do a Google search for "stock firmware (your device model number)", this should give you links to your firmware, download it and place it where you can find it on PC.
Then do a Google search for "USB drivers for Samsung phones", install the drivers, install Samsung kies(can be found with a Google search) if you need to and it will install your drivers correctly.
Then do a Google search for Odin 3.10 and install it on PC.
Boot phone to download mode. Connect device to PC with stock cable, open Odin, if the device is recognized you'll get a blue or yellow comm# box and it will say <ADDED> in the dialogue box in Odin, select the AP button in Odin, browse to where you put your stock firmware on your PC and select it, when back in Odin screen, click Start, let it flash and you'll get a green PASS and the device will reboot, let it boot and load, it will be slow, after booting sign in and you're good to go.
Sent from my SCH-I535 using Tapatalk
hey! im also in the same problem I have red exclamation mark in the uppoer left... and when i use odin to get back to my stock rom.. I get errror. but when i flash pre rooted firmware... I get succes flashing, but still stock in red exclamation mark.. pls help
---------- Post added at 11:00 PM ---------- Previous post was at 10:55 PM ----------
Droidriven said:
If you can get to download mode then you can download your stock firmware file and flash it through Odin. Look it up, do a Google search for "stock firmware (your device model number)", this should give you links to your firmware, download it and place it where you can find it on PC.
Then do a Google search for "USB drivers for Samsung phones", install the drivers, install Samsung kies(can be found with a Google search) if you need to and it will install your drivers correctly.
Then do a Google search for Odin 3.10 and install it on PC.
Boot phone to download mode. Connect device to PC with stock cable, open Odin, if the device is recognized you'll get a blue or yellow comm# box and it will say <ADDED> in the dialogue box in Odin, select the AP button in Odin, browse to where you put your stock firmware on your PC and select it, when back in Odin screen, click Start, let it flash and you'll get a green PASS and the device will reboot, let it boot and load, it will be slow, after booting sign in and you're good to go.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I always fail when im using the stock rom
jockinjc said:
hey! im also in the same problem I have red exclamation mark in the uppoer left... and when i use odin to get back to my stock rom.. I get errror. but when i flash pre rooted firmware... I get succes flashing, but still stock in red exclamation mark.. pls help
---------- Post added at 11:00 PM ---------- Previous post was at 10:55 PM ----------
I always fail when im using the stock rom
Click to expand...
Click to collapse
Are you sure you're flashing the correct stock firmware for your device model number?
Try flashing and if it gives you the bootloop, try booting to recovery and doing a wipe cache then reboot, if that doesn't work, try booting to recovery again and doing a factory reset in recovery and wipe cache then reboot.
If that works to get the pre rooted firmware booted into system and you want to get back to stock I can tell you how to unroot your device and leave it that way or unroot and then flash the original non rooted stock firmware.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Are you sure you're flashing the correct stock firmware for your device model number?
Try flashing and if it gives you the bootloop, try booting to recovery and doing a wipe cache then reboot, if that doesn't work, try booting to recovery again and doing a factory reset in recovery and wipe cache then reboot.
If that works to get the pre rooted firmware booted into system and you want to get back to stock I can tell you how to unroot your device and leave it that way or unroot and then flash the original non rooted stock firmware.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
WOW...I thought i was on the right stock rom... i never noticed the difference in j110h and j100h ... thank you sir...
ill try it now
I also got that on incorrect firmware
Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9, kies and smart switch (which says my device is not supported)
What can i do now?
Please help me
Speed™ said:
Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9 kies and smart switch (which says my devie is not supported.
What can i do now?
Please help me
Click to expand...
Click to collapse
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?
Faspaiso said:
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?
Click to expand...
Click to collapse
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode
Speed™ said:
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode
Click to expand...
Click to collapse
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.
I will try it. I'm downloading the firmware right now (so slow)
Is there any way to turn off the phone? I hope it won0t suffer burn in effect because of the static image.
Faspaiso said:
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.
Click to expand...
Click to collapse
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?
Speed™ said:
I did exactly what you said but nothing. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''
afehst said:
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''
Click to expand...
Click to collapse
I don't think i would help because i neither flashed the firmware. Anyway thanks
Speed™ said:
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?
Faspaiso said:
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?
Click to expand...
Click to collapse
I was on 5.0.2.
I used odin 3.10.6, clicked on AP, swlected the TAR file then clicked start. Everything goes OK until the end when odin displays FAIL. Really dunno what problem coulb be
Bring your S6 back to Samsung for warranty repair.
What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app
Cyanandroid said:
What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I can,t access to recovery but can access to odin mode (download mode)
Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Sent from my A0001 using XDA Free mobile app
---------- Post added at 06:42 AM ---------- Previous post was at 06:40 AM ----------
If not then just download the samsung galaxy stock rom zip amd flash it using philz.U can also root ur system using philz recovery as it has an built in rooting option...
Hope it helps
Sent from my A0001 using XDA Free mobile app
Speed™ said:
I can,t access to recovery but can access to odin mode (download mode)
Click to expand...
Click to collapse
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
Cyanandroid said:
Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Click to expand...
Click to collapse
He is simply asking for help. How should he know?
Faspaiso said:
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
He is simply asking for help. How should he know?
Click to expand...
Click to collapse
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.
Try flashing philz recovery.i actually prefer it.
Sent from my A0001 using XDA Free mobile app
Speed™ said:
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.
Click to expand...
Click to collapse
Well if you succesfully flash 5.1.1 your phone works again. No idea what's wrong with your Odin tho. Try delete all the Odin files and download it again (https://www.androidfilehost.com/?fid=95916177934555153).
I THINK you're on 5.1.1 bootloader and modem as I got the same error as you. I flashed 5.1.1 bootloader and modem and could not start phone before 5.1.1 firmware was flashed.
You COULD try follow this again STEP FOR STEP when re-downloaded Odin (and deleted all the old Odin files). http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3 REMEMBER to download the right version for your device. Like if you have SM-G920F it's JUST below the guide, else scroll further. Remember the bootloader and modem should be flashed at the SAME time and is not for the PDA slot. If it succesfully flash them, then try 5.1.1 stock firmware now.
But step for step the guide and be aware of those (DO NOT connect your phone before this step, otherwise it won't work!).
If you don't want to try that all over again (as I THINK you're on 5.1.1 bootloader and modem) you could try download download Odin again (as linked) and try different USB ports + PC's. If you try to flash bootloader + modem again, then try different PC's and USB ports too.
Wait wait guys... I just flashed a newer versione of twrp (
Why the hell i was flashing an older version??? ) and BOOM...it restarted and surprise...5.1.1 upgrade with my data and files (nothing touched and deleted).
I can't figure it out why root on 5.0.2 didn't work...
Finally i got it back working at least.
Thank you guys form you quick support and thank you Faspaiso for the help
Btw, root on 5.1.1 not already available?
Smells like reactivation lock.
MY phone (Samsung galaxy grand prime SM-G631H/DD) got bricked after i tried to flash custom rom .. I forget to enable usb debugging mode and turn on OEM my pc was turned off during flashing process.. I am not able to flash anything from odin it gives error ..like... while flashing twrp fap lock prevents it from flashing it .. WHEN i turn on my phone "Firmware upgrade encountered an issue.Please select recovery mode in kies&try again . But the samsung kies software does noty support my device ..help me guys...
dhenewar said:
MY phone (Samsung galaxy grand prime SM-G631H/DD) got bricked after i tried to flash custom rom .. I forget to enable usb debugging mode and turn on OEM my pc was turned off during flashing process.. I am not able to flash anything from odin it gives error ..like... while flashing twrp fap lock prevents it from flashing it .. WHEN i turn on my phone "Firmware upgrade encountered an issue.Please select recovery mode in kies&try again . But the samsung kies software does noty support my device ..help me guys...
Click to expand...
Click to collapse
Odin is the only way.
Try these troubleshooting steps for a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Odin can still flash the device while in the "encountered an issue, connect to Kies" screen.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Odin is the only way.
Try these troubleshooting steps for a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Odin can still flash the device while in the "encountered an issue, connect to Kies" screen.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Thnks for reply bro but I have seen it already don't know what to do but
Hey bro n there was many list of firmware version to download does it matter ? In Samsung official site I don't know which version is my phone's default I have tried 3 of them one failed at system.img .another at boot.img .. another stucks at DO NOT TURN OFF THE TARGET! ..
$Ail.A$ce said:
Thnks for reply bro but I have seen it already don't know what to do but
Hey bro n there was many list of firmware version to download does it matter ? In Samsung official site I don't know which version is my phone's default
Click to expand...
Click to collapse
There should be a 3 letter code that represents the country/region/carrier for each firmware version.
Find the newest version for your model number that matches your country/region/mobile carrier.
Sent from my SM-S903VL using Tapatalk
Hello,
in addition to what Droidriven mentioned i would recommend also to use the latest stable odin
-Hope- said:
Hello,
in addition to what Droidriven mentioned i would recommend also to use the latest stable odin
Click to expand...
Click to collapse
I usually recommend a version of Odin that was released shortly after the device was released because those versions were updated to be compatible with the device, whereas newer versions of Odin are less compatible with devices that were released a year or more before it.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
I usually recommend a version of Odin that was released shortly after the device was released because those versions were updated to be compatible with the device, whereas newer versions of Odin are less compatible with devices that were released a year or more before it.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
sorry for late reply bro .. the firmwares I had got are the model version's of my country ..I got slow internet so takes time to download . the PDA version/code which has different number in last like (AOH .AOH2.AOI.AOQ ) so on ..do they need to match my device .. the below link is the source I downloaded
https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531H/NPL/ .. n thanks bro I will try with Odin version suitable for device .
$Ail.A$ce said:
sorry for late reply bro .. the firmwares I had got are the model version's of my country ..I got slow internet so takes time to download ..Should the PDA version/code match my device ..from the below link
https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531H/NPL/ .. n thanks bro I will try with Odin version suitable for device .
Click to expand...
Click to collapse
As long as what you flash is for your specific device model number and your region/carrier you should be fine.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
As long as what you flash is for your specific device model number and your region/carrier you should be fine.
Click to expand...
Click to collapse
Well bro I downloaded all the firmware of it's carrier available .. and also tried with different Odin .... Still it fails at system.img .. ?
dhenewar said:
Well bro I downloaded all the firmware of it's carrier available .. and also tried with different Odin .... Still it fails at system.img .. ?
Click to expand...
Click to collapse
The custom ROM that you tried to flash, was it for your model number? Or was it for a different device?
Try different USB ports, try a different PC, try a different cord.
If all else fails, try finding a copy of your device's PIT file and flash that in Odin along with the stock firmware. Place the firmware where it goes then place the PIT in the pit tab in odin, make sure the "re-partition" option is checked in Odin then start.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
The custom ROM that you tried to flash, was it for your model number? Or was it for a different device?
Try different USB ports, try a different PC, try a different cord.
If all else fails, try finding a copy of your device's PIT file and flash that in Odin along with the stock firmware. Place the firmware where it goes then place the PIT in the pit tab in odin, make sure the "re-partition" option is checked in Odin then start.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Tried everything bro .. I gave up on this phone ..However I appreciate your concern bro thanks
dhenewar said:
Tried everything bro .. I gave up on this phone ..However I appreciate your concern bro thanks
Click to expand...
Click to collapse
Win some, lose some.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Win some, lose some.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Haha there's no win bro .. gone is gone .. for new u should pay some or regret some for messing your lonely only phone ?
Hello, This could be kind of weird but
Download the Unified Android tool kit
Do a copy of the frimware you want to flash
remove the .md5 extension from the file name of the new file
the image file should now transfer into a zip file
extract it in the Unified Android tool kit INPUT folder
Run the ToolKit
it will do an update check
now type 99 and press enter
a list of choices will appear choose the " create tar files from image files" it's maybe number 8 as i remember
now choose to make a separate tar files of each image file
once done , the tar files will be placed in the OUTPUT folder
try to flash System tar file alone without the other partitions.
-Hope- said:
Hello, This could be kind of weird but
Download the Unified Android tool kit
Do a copy of the frimware you want to flash
remove the .md5 extension from the file name of the new file
the image file should now transfer into a zip file
extract it in the Unified Android tool kit INPUT folder
Run the ToolKit
it will do an update check
now type 99 and press enter
a list of choices will appear choose the " create tar files from image files" it's maybe number 8 as i remember
now choose to make a separate tar files of each image file
once done , the tar files will be placed in the OUTPUT folder
try to flash System tar file alone without the other partitions.
Click to expand...
Click to collapse
Sorry for v.late reply bro .. for this to work fo I need to be rooted?? And I have done exactly what you said but I got stuck in that system.tar file flashing
How much time it would take to flash system.tar file
dhenewar said:
Sorry for v.late reply bro .. for this to work fo I need to be rooted?? And I have done exactly what you said but I got stuck in that system.tar file flashing
How much time it would take to flash system.tar file
Click to expand...
Click to collapse
System.IMG is the largest file to flash so it would be the longest to flash
-Hope- said:
System.IMG is the largest file to flash so it would be the longest to flash
Click to expand...
Click to collapse
It got stuck at like 3 or 4 % .. for 20 minutes I waited it didn't progress any further
The imp. Thing is Fap lock n ?
And when I try flashing other .tar files it goes 100% n stuck at RQT_CLOSE!! FOR A WHILE and it fails