Database Info

USB Tether GUI for Stock Firmware (Non-Rooted)

Hello all. I have an early Christmas present for all the Stock firmware users.
I have created a usb tethering application that should work for all Android devices regardless of root access. The code is and will always be GPL. I used the azilink android app written by aziwoqpd--> http://forum.xda-develoers.com/showthread.php?t=481162
I have to give him lots of credit, because without his app this would not work.
This has been tested on the G1 and the Motorolla Droid. It should work on the Hero, MyTouch(Confirmed working), etc... The GUI should install and work on all versions (x86, x86_64) of Windows starting with XP.
The GUI that I have written controls the adb port forwarding and openvpn connection while showing status. Please test this application and let me know how it goes.
Download:
http://www.4shared.com/file/168168016/47ce692d/azilink-gui-setup-110.html
Source:
http://www.4shared.com/file/168521281/18f538f5/azilink-gui_src.html

has anyone tried this

So your telling me this is "wifi tether" for non rooted users?

G1-evolve said:
So your telling me this is "wifi tether" for non rooted users?
Click to expand...
Click to collapse
Nope. This is USB Tether for non rooted users

Link is down for azilink, use this link instead for more information:
http://code.google.com/p/azilink/
Confirmed working on Windows 7, and doesn't require root.
Edit: The zip in original post contains the GUI, the apk, and open vpn. Start the apk, then click "connect" on the azilink-gui. Make sure "USB debugging" is enabled in Settings on your phone.
Thanks a lot.

kevev said:
Nope. This is USB Tether for non rooted users
Click to expand...
Click to collapse
What's the difference?

G1-evolve said:
What's the difference?
Click to expand...
Click to collapse
Wifi tether and USB tether are two totally different methods of tethering.
Wifi tether doesn't utilize the usb cable to tether.

G1-evolve said:
What's the difference?
Click to expand...
Click to collapse
USB Tether requires the device to be connected to the Computer via USB.
Wifi tether allows users to wirelessly connect to your device via their Computer.

Wisefire said:
USB Tether requires the device to be connected to the Computer via USB.
Wifi tether allows users to wirelessly connect to your device via their Computer.
Click to expand...
Click to collapse
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?

G1-evolve said:
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
Click to expand...
Click to collapse
ADB is included in the azilink-gui installer. The only thing you will need to do manually is install the driver which is included in the install directory.

G1-evolve said:
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
Click to expand...
Click to collapse
Download ADB from here:
http://azilink.googlecode.com/files/adb.zip
I'm not sure if ADB is built into the azilink-gui, so it's safe to just install it on your girlfriend's PC.

confined
wohoo. worx fine..thankyou awsome job

fit333 said:
wohoo. worx fine..thankyou awsome job
Click to expand...
Click to collapse
Glad to see it works on the MyTouch.

The source has been posted to the first page.

[Q] Need Help - Samsung Galaxy Fit S5670

Hi All,
I am relatively a new user to Android and have recently bought my new Samsung Galaxy Fit mobile phone.
I have my Broadband connection for my PC and am able to make it as a wireless router. So my only job would be connect my phone to my PC's network.
But, I got to know about the limitations we have in Android phones with Ad-hoc networking and hence will have to tweak the settings, which first requires rooting into the phone.
So, what I am looking for is a way to root into my mobile and if available a complete reference on how to connect to any ad-hoc network that is available.
Thanks so much..! Any response is highly appreciated.

Balachandra said:
Hi All,
I am relatively a new user to Android and have recently bought my new Samsung Galaxy Fit mobile phone.
I have my Broadband connection for my PC and am able to make it as a wireless router. So my only job would be connect my phone to my PC's network.
But, I got to know about the limitations we have in Android phones with Ad-hoc networking and hence will have to tweak the settings, which first requires rooting into the phone.
So, what I am looking for is a way to root into my mobile and if available a complete reference on how to connect to any ad-hoc network that is available.
Thanks so much..! Any response is highly appreciated.
Click to expand...
Click to collapse
You could use an app such as the one attached. Download and install the attached file and try it. Hope it helps.

Thanks Theonew for your response, but unfortunately the Z4root doesn't seem to work.
I installed it and tried runnin the app, it runs for a while and then auto disappears. I assume that this should have worked but unfortunately when I type "su" in the Terminal it shows Permission denied again.
Little more help..

Balachandra said:
Thanks Theonew for your response, but unfortunately the Z4root doesn't seem to work.
I installed it and tried runnin the app, it runs for a while and then auto disappears. I assume that this should have worked but unfortunately when I type "su" in the Terminal it shows Permission denied again.
Little more help..
Click to expand...
Click to collapse
Try the other app uploaded in my previous post. If it still doesn't work, then go here: http://forum.xda-developers.com/showthread.php?t=803682 and see if this works.

Hi Theonew,
Thanks for the link. I used SuperOneClick and it worked well.
Now, as I read in many articles I tried using a wpa_suppliant patch to detect the ad hoc networks but this does not seem to detetc any.
Can you please link me to any article if available

Balachandra said:
Hi Theonew,
Thanks for the link. I used SuperOneClick and it worked well.
Now, as I read in many articles I tried using a wpa_suppliant patch to detect the ad hoc networks but this does not seem to detetc any.
Can you please link me to any article if available
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=754961. Hope this helps.

[Q]

I have an android phone with 2.2 version. I just downloaded connectify me on my laptop which is having windows vista in it. My andriod phone is unable to recognise the wi-fi connection. On browsing thru the help section i found out that since I have opted for the Wi-fi Ad-hoc, Encrypted (WEP) shared mode my mobile phone is unable to recognise the Wi-fi connection. Plz help

lavitac said:
I have an android phone with 2.2 version. I just downloaded connectify me on my laptop which is having windows vista in it. My andriod phone is unable to recognise the wi-fi connection. On browsing thru the help section i found out that since I have opted for the Wi-fi Ad-hoc, Encrypted (WEP) shared mode my mobile phone is unable to recognise the Wi-fi connection. Plz help
Click to expand...
Click to collapse
Try using this: http://www.arenddeboer.com/wifi-ad-hoc-enabler-for-android/.

Not able to use Connectify !!! Someone please help me :(

I am here again with a problem, sorry. Please read this fully !
I have a lenovo laptop and a PC, i dont use laptop at all, but i tried to Start a wifi hotspot using Connecity....but i am not able to start a hotspot as it says NO AP MODE SUPPORTED (http://imgur.com/Bcwgl)
Note; i have enabled my wifi but yet it say, please enable, my wifi card is Intel Pro Wireless 3945ABG.
I downloaded the older version and installed, but somehow i can manage to start a hotspot with it, but it also say the above said error,
but it will start hotspot atleast.
There are only 2 Secutiry mode here and all are AD-HOC, one is Open another is WEP.
my mobile is not detecting the hotspot even if created....what is the solution for this...
i searched and got a info (http://forum.xda-developers.com/showthread.php?t=1115610)
there they told to paste a file...but when i open rootexplore it says this error;
http://imgur.com/zIjbe
What can i do now.
my phone is rooted.
connectify say my wifi card is abandoned, new version will not start hotspot, but old version it say NO AP MODE SELECTED, but it will start the hotspot.
Connectify support; http://support.connectify.me/entrie...at-are-known-to-be-compatible-with-connectify
there its written my wifi card is abandoned.
I cant afford to buy a router or new wifi modem, plz help with this.

You have the answer in your OP itself. Check this out:
nectify can work in Ad-Hoc mode with just about any Wi-Fi device on Windows 7, Vista, or XP.
However, to run in Access Point mode, you must be running Windows 7, and you must have a Windows 7 certified network device driver for your Wi-Fi device. You have this device driver if you own any Windows 7 logo certified Wi-Fi device (laptop, dongle, card, etc.). However, many older devices have also been updated with Windows 7 certified drivers.
Click to expand...
Click to collapse
And this:
The following are known "abandoned" devices, believed to lack certified Windows 7 drivers from their manufacturers. They could of course be updated at any time.
Click to expand...
Click to collapse
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.

Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......

'cooleagle' said:
You have the answer in your OP itself. Check this out:
And this:
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.
Click to expand...
Click to collapse
bhargav143 said:
Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......
Click to expand...
Click to collapse
Guyssssssssss.....i found a solution....
here it is...
http://forum.xda-developers.com/showthread.php?t=1115610
But i am using Old Connectify, as new version doent allow me to start hotspot, it say no ap mode supported...
Even the old version say that, but it allow me to create the hotspot.
I have updated the drive @cooleagle
Now i am using this setting AD-HOC WEP.
not open
But thanks for trying to help me

Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR

selva.simple said:
Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR
Click to expand...
Click to collapse
oh is it, however i have took a backup of original file...
can u give the link of that app ??? will that work without rooting..

chandrus1983 said:
can u give the link of that app ??? will that work without rooting..
Click to expand...
Click to collapse
WiFi Ad Hoc Enabler
It will work only in rooted devices. Because Andorid cannot detech Adhoc WiFi in general. Only a rooted device with the wpa_supplicant file change can do that. Since its a system file, rooting is must

We're sorry, the requested URL was not found on this server.
anyways, i have did some patch n its working now

not connecting in my SGS 2
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds

kalaikvanan said:
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds
Click to expand...
Click to collapse
Using ICS or GB ???? Rooted ??

How to access internet from PC to Phone ?

M using a rooted Lollipop Samsung S4 with dead WIFI IC... Hence I am unable to use Internet through WIFI... I wanted to know a method to use Internet in my phone through my PC... Tried reverse threading but it didn't work...it says connected but m not able to access internet through the same...does anyone have any idea how to do that ?

prateekgupta128 said:
M using a rooted Lollipop Samsung S4 with dead WIFI IC... Hence I am unable to use Internet through WIFI... I wanted to know a method to use Internet in my phone through my PC... Tried reverse threading but it didn't work...it says connected but m not able to access internet through the same...does anyone have any idea how to do that ?
Click to expand...
Click to collapse
Connect your Android device with a USB-Cable to your PC
In the Wireless & networks section (you might need to click on "More..." on some android devices), Try to activate the USB Internet. Now choose the os .(doesn't really matter)
Now there should be check mark on USB internet.(if you're doing this for the first time. You may be prompted and that's ok)
Now on the Windows network connection tab on PC right click the the network you want to share->properties>sharing tab and check mark for allow other users to connect.

[email protected] said:
Connect your Android device with a USB-Cable to your PC
In the Wireless & networks section (you might need to click on "More..." on some android devices), Try to activate the USB Internet. Now choose the os .(doesn't really matter)
Now there should be check mark on USB internet.(if you're doing this for the first time. You may be prompted and that's ok)
Now on the Windows network connection tab on PC right click the the network you want to share->properties>sharing tab and check mark for allow other users to connect.
Click to expand...
Click to collapse
There is no such option in my phone

prateekgupta128 said:
There is no such option in my phone
Click to expand...
Click to collapse
It will be under tethering and portable hotspot in some phones