Hi. I'm new here. I want to install a custom recovery but i can't beacause my samsung galaxy core plus sm g350 usb port doesn't work with my pc. I have also try installing new driver. Can someone help with the corect terminal emulator comand for install recovery Image?
Maybe you haven't put your phone in Developer Mode.To do it go to Settings/About Phone and type 5 to 7 times to Build Name after that an new cateogery will appear.Open it and enable USB Debugging.Then download Odin3 in your PC.After that put your phone in Download Mode.And flash the recovery.
@Fulbert95
If your phone is rooted (you would need it anyways), you can install the Recovery via Rashr too, which is a much safer solution than a Terminal Command
Related
Hi I was trying to upgrade the Android Version on a Galaxy S2.
I installed Clockwork Mod Recovery and was able to boot into it but couldn't access the SD for installing image.
I booted into the downloading screen ( vol down and power on boot ) and installed an image then bootloader via Odin.
Now when I boot there is the standard Samasung Galaxy S2 logo and I can't access the downloading screen or clockwork mod and it just goes to the animated S logo with usb not recognized appearing on the connected Windows box.
Is there anyway to restore from this point?
Are you able to access the phone through ADB?
If yes, run: adb reboot download, and this should put you in downlaod mode so you can odin a new firmware.
If no adb access, Does odin recognize the phone?
If yes, you should be able to odin a new firmware.
Make sure when you flash the new firmware you are using the correct rom for your device. ie: from your post you have a GS2 I9000 which is not the same as the GS2 SGH-T989.
you would use roms from this forum: http://forum.xda-developers.com/forumdisplay.php?f=665
If you are unable to flash a rom you can always purchase a download mode jig to get you into download mode if you have not Hard Bricked the phone. If you have Hard Bricked your phone there are a couple of sites that do Jtag repair to unbrick your phone.
Good Luck
No reponse from Odin or ADB
I have purchased a download mode jig hopefully it will work.
Thanks for your advice
I've tried multiple tutorials to root my phone but whenever I flash the CWM and restart my phone in recovery mode I still get the default Android recovery screen... What should I do?
If you are using 4.2.2 Use this recovery http://d-h.st/y0b just put it to ODIN on PDA don't extract it. And if you are using 4.1.2 Use k2wl recovery which you can find in this forum this should work.
.
It's working now, but now it says E: Can't mount /sdcard/ .......
Hello, i have same problem and i dont know what iam doing wrong. Btw before i haev rooted many phones and with all was easy, but not with this one. Help me guys. Iam using 4.2.2
Read the forum and use search !!!
When after flashing CWM and restarting your you are getting standard recovery not CWM the when flashing the CWM uncheck Restart in ODIN and let the phone flash the CWM, when it will show succesfull the unplug the phone and restart it, simple as that.
I need a link to root my phone. The above links a dead or virusscanner/firewall go crazy.
Any chance of a working root file for GT-I9105P?
My device is SAMSUNG GALAXY Ace 4 LTE SM-G313F
I had rooted my phone with Kingoroot recently
all were fine,,
but i had this problem that even if i had installed clockworkmod CMW, it always boots into Android stock Recovery,,,,,,,,,,,
i tried to install PHILZ RECOVERY to fix it as i heard that installing Philz will boot us to CWM instead of stock recovery........ it failed wen i tried to install Philz via Odin............
i had Rom Installer app installed on my device,,
i clicked on Install Zip frm Sd card.. it restarted and then it started bootlooping.............................
forever
and also with a red exclamation mark on top............
all i can do is to go to DOWNLOAD MODE...
plz help me guyzzzz plzzzzzzzzzzzzzzz
Go in download mode and then flash your recovery if that doesn't work for you then try this :
Download platform tools from Android developers page and copy you recovery in the same folder as adb->platform tools open a terminal there by shift+right click and in your phone to into download mode and type "adb devices" and hit enter if it shows a vu6t579chv something like that and next to it fastboot then type "fastboot flash recovery name_of_recovery. file_type" and hit enter. Reboot into for you phone or stock recovery. Look that part up.
hey guys i tried many a times to install custom rom on my samsung s6 coz i am bored with touchwiz marshmallow
soo when i flash twrp with odin and when i enter TWRP and then reboot without doing anything it wont reboot it just keeps comming Samsung s6 boot again n again
SOO i need help guys i have CM13 for samsung s6 and in installation also it creates error of updater error 7
i edited updater-script and removed setprop line and when i flashed it successfully flashed but when i reboot to system it shows samsung s6 boot with kernel is not seandroid enforcing
Please guys help me to fix i am bored with touchwiz want to use other rom help
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
forumber2 said:
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
Click to expand...
Click to collapse
i have also flashed noble rom same issues pls ****ing help
and btw when i flash arters recovery i can successfully log in its recovery but later on when i flash something and press reboot system then that button doesnt work it just shows it was pressed and is stucked there and can't even move from there
Hi
I use Samsung galaxy s8+ and, I rooted my phone before but now I flash an official ROM, as you know because of the Knox Samsung pay Samsung health Samsung internet secret mode and etc don't work.
I have to do these edits with build.prop to make Samsung apps work
"ro.config.knox=v30" to "ro.config.knox=v00"
thanks to @iveki
and
"ro.config.tima=1" to "ro.config.tima=0"
but build.prop is a system file so I have to root my phone or flash TWRP recovery to have access to the root shell. (I want an official ROM so I can't root or flash TWRP recovery)
I tried to fastboot TWRP recovery (not flash it just fastboot it) but looks like Samsung disabled fastboot.
what should I do to have official ROM and make Samsung apps work with no root and no custom recovery?
or tell me a way to fastboot s8+, please
also, I look for SM-G955FD stock recovery but every file I found won't work.
.