Is it possible to use my Xbox 360 Cable Controller with an OTG Cable on CM 12.1 ?
It worked perfect on Stock and CM 11 but on 12.1 it doesnt work
xBiOTeCHx said:
Is it possible to use my Xbox 360 Cable Controller with an OTG Cable on CM 12.1 ?
It worked perfect on Stock and CM 11 but on 12.1 it doesnt work
Click to expand...
Click to collapse
who device u Use?
Really?
I post this in a Moto G Section, so I got a Moto G XT1032
And Next time, which device
xBiOTeCHx said:
Is it possible to use my Xbox 360 Cable Controller with an OTG Cable on CM 12.1 ?
It worked perfect on Stock and CM 11 but on 12.1 it doesnt work
Click to expand...
Click to collapse
A couple of kernel configs need to be enabled to make it work, my build already has them enabled if you want it: http://forum.xda-developers.com/moto-g/development/unofficial-cyanogenmod-12-1-28-01-2016-t3303903
https://github.com/MotoG-2013/andro...mmit/7094b5e8834a03025f9fa36edd003085e191c80f
fonz93 said:
A couple of kernel configs need to be enabled to make it work, my build already has them enabled if you want it: http://forum.xda-developers.com/moto-g/development/unofficial-cyanogenmod-12-1-28-01-2016-t3303903
https://github.com/MotoG-2013/andro...mmit/7094b5e8834a03025f9fa36edd003085e191c80f
Click to expand...
Click to collapse
And what are the differences between this version and the official snapshot from CM 12.1 (that one i got)?
xBiOTeCHx said:
And what are the differences between this version and the official snapshot from CM 12.1 (that one i got)?
Click to expand...
Click to collapse
Read the first post, all the major differences are listed
fonz93 said:
Read the first post, all the major differences are listed
Click to expand...
Click to collapse
so is it better than the normal cm 12.1 or would you say its at the same level?
And can I use my custom kernels on this rom?
Btw dirty flash or clean flash?
xBiOTeCHx said:
so is it better than the normal cm 12.1 or would you say its at t he same level?
Click to expand...
Click to collapse
It's surely better, the official one is 3 months old and it has the strict mode bug, which compromises the stability a lot
fonz93 said:
It's surely better, the official one is 3 months old and it has the strict mode bug, which compromises the stability a lot
Click to expand...
Click to collapse
I got moderate
Do I need the camera blobs or only if I flash a custom kernel?
xBiOTeCHx said:
Do I need the camera blobs or only if I flash a custom kernel?
Click to expand...
Click to collapse
Only if you flash a custom kernel, read the #2 post accurately please
fonz93 said:
Only if you flash a custom kernel, read the #2 post accurately please
Click to expand...
Click to collapse
Yeah did it already, but better i ask instead of making any mistakes
Now I got strict status and every seconds a google play service error :/
But my controller works, thx for this.
xBiOTeCHx said:
Now I got strict status and every seconds a google play service error :/
But my controller works, thx for this.
Click to expand...
Click to collapse
I don't know which error did you get (i know it's not ROM related because i've never heard such issue), but this is probably due to a bad installation (bad gapps package or modified system image, deleted/disabled apk or any other change)
fonz93 said:
I don't know which error did you get (i know it's not ROM related because i've never heard such issue), but this is probably due to a bad installation (bad gapps package or modified system image, deleted/disabled apk or any other change)
Click to expand...
Click to collapse
Yeah I already got it, i just had to flash the GApps again and for some reasons I dont know, I had to Install SuperSU again/root.
xBiOTeCHx said:
I had to Install SuperSU again/root.
Click to expand...
Click to collapse
I don't know why you had to install SuperSU, it makes no sense, the ROM already has a built-in root that can be enabled in Settings/Developer settings
fonz93 said:
I don't know why you had to install SuperSU, it makes no sense, the ROM already has a built-in root that can be enabled in Settings/Developer settings
Click to expand...
Click to collapse
I know but I used this method since I first rooted my phone and for me its good.
Related
Just got new Oneplus One and Android 5.0.1 installed.
Camera needs SD card to be installed?!
"insert SD card before using camera" direct translate from finnish
Any help for this?!
Tryed to google and brows this forum, but couldn´t find answer.
thx
Sami
Hi Samijh,
May I know whether you have customs ROM installed?
Please let us know whether you have CM11 44s installed. U can get that info from About phone section.
May I know whether you are using built in camera app (or) different ones from play store?
Sent from my 1+1 using XDA Free mobile app
SPD1986 said:
Hi Samijh,
May I know whether you have customs ROM installed?
Please let us know whether you have CM11 44s installed. U can get that info from About phone section.
May I know whether you are using built in camera app (or) different ones from play store?
Sent from my 1+1 using XDA Free mobile app
Click to expand...
Click to collapse
Not sure about version you suggested...?
CM 12-20141214 ?
I´ve tried built in camera, Open Camera and Google Camera.
SamiJH said:
Not sure about version you suggested...?
CM 12-20141214 ?
I´ve tried built in camera, Open Camera and Google Camera.
Click to expand...
Click to collapse
Hi,
May I know whether you installed unofficial CM12?
[QRCODE][/QRCODE]
SPD1986 said:
Hi,
May I know whether you installed unofficial CM12?
Click to expand...
Click to collapse
Damn, didn´t know... my friend rootet this and I just asked latest versions. ..wrong choice.
SPD1986 said:
Hi,
May I know whether you installed unofficial CM12?
Click to expand...
Click to collapse
Yes it's unofficial, there is no official lollipop ROM.
SamiJH said:
[QRCODE][/QRCODE]
Damn, didn´t know... my friend rootet this and I just asked latest versions. ..wrong choice.
Click to expand...
Click to collapse
I'd suggest wiping the device and flashing the 44S fastboot images, that'll give you the latest official firmware.
Transmitted via Bacon
timmaaa said:
Yes it's unofficial, there is no official lollipop ROM.
I'd suggest wiping the device and flashing the 44S fastboot images, that'll give you the latest official firmware.
Transmitted via Bacon
Click to expand...
Click to collapse
Hi,
As Timmaaa suggested wipe the device and install CM11 again. You can check the information about **unofficial build** of CM12 in HERE . daleski75 is doing unofficial build for CM12 and he is releasing daily fixes. If you like to stay with CM12 make a post in that thread about this issue. I am sure he will get back to you.
Regards,
Paran.
SPD1986 said:
Hi,
As Timmaaa suggested wipe the device and install CM11 again. You can check the information about **unofficial build** of CM12 in HERE . daleski75 is doing unofficial build for CM12 and he is releasing daily fixes. If you like to stay with CM12 make a post in that thread about this issue. I am sure he will get back to you.
Regards,
Paran.
Click to expand...
Click to collapse
He needs to identify whether he's actually running daleski's build of CM12 before making a comment in that thread though, there are multiple unofficial builds of CM12 available, not just his.
Transmitted via Bacon
SPD1986 said:
Hi,
As Timmaaa suggested wipe the device and install CM11 again. You can check the information about **unofficial build** of CM12 in HERE . daleski75 is doing unofficial build for CM12 and he is releasing daily fixes. If you like to stay with CM12 make a post in that thread about this issue. I am sure he will get back to you.
Regards,
Paran.
Click to expand...
Click to collapse
Somehow I couldn´t wipe the phone and reinstall
Anyhow, I googled CM 12-20141214 version and it seemed to be same as daleski75 unofficial previous version. Installed the latest one and now everything seems to work fine!
Actually not more than the title says
A rom with XPosed working. Unfortunately, the battery in CM is too weak to run without the needed XPosed modules for me.
I'd use CM13 once it becomes stable. I've been watching the CM13 thread and so far the development is pretty good. Imo I feel it might be a lot better than CM12.1 in terms of battery life.
Sportfreunde said:
A rom with XPosed working. Unfortunately, the battery in CM is too weak to run without the needed XPosed modules for me.
Click to expand...
Click to collapse
And wich ROM would that be?
Cm 13 is smooth but unfortunately my sim cards aren't detected on xt1033 so back to stock xposed 5.1.1
Hello TjsdJ how to back to stock ROM in XT1032? Can you send procedure & files to me
Tjsdj said:
Cm 13 is smooth but unfortunately my sim cards aren't detected on xt1033 so back to stock xposed 5.1.1
Click to expand...
Click to collapse
Check newest CM13 build (07/11) by anerik. There dual SIM is fixed!!!
Andus1988 said:
Check newest CM13 build (07/11) by anerik. There dual SIM is fixed!!!
Click to expand...
Click to collapse
yep it is better no fc but unfortunately he is not going to maintain
Tjsdj said:
yep it is better no fc but unfortunately he is not going to maintain
Click to expand...
Click to collapse
Yes, because actually it only was for his personal use. Check latest build by @Flashhhh there dual sim also should work.
Hv u installed new xposed on it?
Tjsdj said:
Hv u installed new xposed on it?
Click to expand...
Click to collapse
No, I didn't. But actually it should work!
Andus1988 said:
No, I didn't. But actually it should work!
Click to expand...
Click to collapse
xposed worked gravity box also supported
ports13 said:
Actually not more than the title says
Click to expand...
Click to collapse
Neither. Not as supplied in any case.
CM13 with [Open]PDroid would be my choice.
PACROM MARSHMALLOW
I am ready to help you fix your device incase something happens (Like losing recovery for example)
This is an unofficial port of PacRom for the z3 compact. The build is not tested and I am not responsible for anything that happens to your device. Your device is your, and only your responsibility
The bugs might be camera, build.prop and maybe even booting. This is a very early build and I am looking for testers who do not use their z3c as their daily driver. I am not able to test these builds due to my device being a daily driver. Please report any bugs that there may be.
The installation process is similar to that of any custom rom.
Use Gapps Pico, only if you want play store.
Installation:
1. Boot to TWRP3
2. Backup current rom
3. Wipe data/ factory reset.
4. Install pacromport.zip (Download)
5. Install opengapps arm pico (6.0)
6. Reboot and pray that it boots.
DO NOT USE WITH SIM !!! RIL not working, using sim might result in sim lock
Credits:
-PacRom Devs
-nelvinchi (XDA Dev- used his cm13 as base)
-GOD
I cannot guarantee that this rom works 100% or that it works at all. I'm asking for testers who can test this rom and tell me about any bugs. If it does not work, do not kill me. This rom was ported from hammerhead and I really doubt that it works. And do not try to install it on any other device, I have turned off assert, so it will not check what device you are using.
Has anyone tried yet? If you have, let me know please.
panzerox123 said:
Has anyone tried yet? If you have, let me know please.
Click to expand...
Click to collapse
I will try it soon.
king960 said:
I will try it soon.
Click to expand...
Click to collapse
Hopefully you don't use the phone as a daily driiver. I have really less hopes that the phone will bootup. And as a precaution, dont use the phone with a sim ok? Thanks!
Status error 7.
king960 said:
Status error 7.
Click to expand...
Click to collapse
Hmmm thanks for trying out. Build.prop problem.
king960 said:
Status error 7.
Click to expand...
Click to collapse
Iwill start from sratch again, but currently working on miui 8 port. It'll wake a week or two to get this working
oh nice! but for this device? and based on stock rom or not?
salva93 said:
oh nice! but for this device? and based on stock rom or not?
Click to expand...
Click to collapse
Not based on stock, but unfortunately not working now. You can try out my stock based aoxp rom
Link not working... "404 not found"
pickandrew said:
Link not working... "404 not found"
Click to expand...
Click to collapse
I know, I removed it myself. The rom is not working as of now, I mean there are a few incompatibilies. I will try to get it working in another 2 weeks
panzerox123 said:
Iwill start from sratch again, but currently working on miui 8 port. It'll wake a week or two to get this working
Click to expand...
Click to collapse
Porting KitKat based MIUI 8 for Z3C?
Cirra92 said:
Porting KitKat based MIUI 8 for Z3C?
Click to expand...
Click to collapse
I guess MM based. MIUI team has released patchrom for Marshmallow based MIUI 8
Patchroom here: https://github.com/MiCode/patchrom
king960 said:
I guess MM based. MIUI team has released patchrom for Marshmallow based MIUI 8
Patchroom here: https://github.com/MiCode/patchrom
Click to expand...
Click to collapse
Well that would be nice as well as camera mods could be applied, because stock Sony rom became boring and a bit annoying. High hopes for an updated MIUI rom anyway
Cirra92 said:
Porting KitKat based MIUI 8 for Z3C?
Click to expand...
Click to collapse
Marshmallow based
panzerox123 said:
Marshmallow based
Click to expand...
Click to collapse
Uuu nice, anxiously waiting for that one :fingers-crossed:
Cirra92 said:
Uuu nice, anxiously waiting for that one :fingers-crossed:
Click to expand...
Click to collapse
I've managed to port everything. But I want to port the ROM features to stock so I can make it available for LB and UB. But there is only so much I can do now.
panzerox123 said:
I've managed to port everything. But I want to port the ROM features to stock so I can make it available for LB and UB. But there is only so much I can do now.
Click to expand...
Click to collapse
Amazing stuff! I'm on UBL, so I'll surely flash it even if you release it for UBL only
Cirra92 said:
Amazing stuff! I'm on UBL, so I'll surely flash it even if you release it for UBL only
Click to expand...
Click to collapse
I'm almost done with UB. Not sure if it will work however, my ports have usually failed to even boot. That is the reason I am sticking with stock based rons
After Unlocking The Device Bootloader and Installing TWRP Recovery, Then i search for a Custom ROM and then i found this Thread, and I download the Resurrection Remix ROM, and For me its working very fine and haven't notice any Bug for one week. Following are the Video Review.
Live battery?
SAFI_AFRIDI said:
After Unlocking The Device Bootloader and Installing TWRP Recovery, Then i search for a Custom ROM and then i found this Thread, and I download the Resurrection Remix ROM, and For me its working very fine and haven't notice any Bug for one week. Following are the Video Review.
Click to expand...
Click to collapse
It's a 21/01/2017 version discontinued
I'm still using this, and will continue to do so until Nougat roms come out. Security is way out of date now, of course, but I just love the features of RR. Will not change to Lineage or Mokee.
kazekiri said:
I'm still using this, and will continue to do so until Nougat roms come out. Security is way out of date now, of course, but I just love the features of RR. Will not change to Lineage or Mokee.
Click to expand...
Click to collapse
I love RR too but i can't understand if it is fully functional (dt2w, lcd problems, camera upside down, no agps, wakelock with localization on... are being resolved in these days and some of those problems can't be solved because of proprietary issues) so how is possible that it works totally?
At this point i ask myself why the developers didn't use this source to build then?
angelgf90 said:
Live battery?
Click to expand...
Click to collapse
Battery is the same as in Miui V8 Global Stable and you can Extend it with Greenify and Disabled Location for apps.
cimdrap said:
I love RR too but i can't understand if it is fully functional (dt2w, lcd problems, camera upside down, no agps, wakelock with localization on... are being resolved in these days and some of those problems can't be solved because of proprietary issues) so how is possible that it works totally?
At this point i ask myself why the developers didn't use this source to build then?
Click to expand...
Click to collapse
They Focus On Lineage and this is just one build. so for me its working fine.
SAFI_AFRIDI said:
They Focus On Lineage and this is just one build. so for me its working fine.
Click to expand...
Click to collapse
RR is based on Lineage sources... I'm trying to learn and understand how is possible that we have a lot of proprietary stuff issues and there are not in an older rom
cimdrap said:
I love RR too but i can't understand if it is fully functional (dt2w, lcd problems, camera upside down, no agps, wakelock with localization on... are being resolved in these days and some of those problems can't be solved because of proprietary issues) so how is possible that it works totally?
At this point i ask myself why the developers didn't use this source to build then?
Click to expand...
Click to collapse
I haven't had any issues at all with mine (though I haven't tested dt2w since I don't use it). Works pretty much flawlessly after doing a couple fixes:
1. flash the "lights" zip to fix the LED behavior
2. Disable NetworkLocationService
Then this rom works damn near perfectly. I've had zero issues using it as a daily driver for 3 months.
kazekiri said:
I haven't had any issues at all with mine (though I haven't tested dt2w since I don't use it). Works pretty much flawlessly after doing a couple fixes:
1. flash the "lights" zip to fix the LED behavior
2. Disable NetworkLocationService
Then this rom works damn near perfectly. I've had zero issues using it as a daily driver for 3 months.
Click to expand...
Click to collapse
How about a fast charging ? Does it work or not ?
There may be a patch or custom kernel to fix this issue ? Please tell me.
Thanks.
cartosary said:
How about a fast charging ? Does it work or not ?
Click to expand...
Click to collapse
To be honest, I don't know what speed I am charging at, but it is fast enough for me.
cimdrap said:
It's a 21/01/2017 version discontinued
Click to expand...
Click to collapse
Here you can find a build from 10th of February ...
This might also be discontinued, so I will wait till the Resurrection people can take an official LineagOS version as base ...
Skeeve245 said:
Here you can find a build from 10th of February ...
Click to expand...
Click to collapse
It's from a different dev and I have heard it has a lot more bugs. Don't flash it.
SAFI_AFRIDI said:
After Unlocking The Device Bootloader and Installing TWRP Recovery, Then i search for a Custom ROM and then i found this Thread, and I download the Resurrection Remix ROM, and For me its working very fine and haven't notice any Bug for one week. Following are the Video Review.
Click to expand...
Click to collapse
Do you know why it's taking hours to boot up? Do I have to install any other file?
realz88 said:
Do you know why it's taking hours to boot up? Do I have to install any other file?
Click to expand...
Click to collapse
not at all but it must be some problems at your side. try to wipe cache and Dalvik cache after Installation.
WiFi peap-sim
The wifi peap-sim is not working. Anyone have the same experience?
how do i update from cyanogen os 12.0 yng1tas17l to the latest one ?
i had given the phone for battery repair and there turned out to be a software issue as well and when i got it back it had this software installed, so now i want to sell it off so looking to update it to the latest before selling it or keeping it as a standby phone
rrohanjs said:
how do i update from cyanogen os 12.0 yng1tas17l to the latest one ?
i had given the phone for battery repair and there turned out to be a software issue as well and when i got it back it had this software installed, so now i want to sell it off so looking to update it to the latest before selling it or keeping it as a standby phone
Click to expand...
Click to collapse
Flash the latest firmware and flash lineage os.
Mr.Ak said:
Flash the latest firmware and flash lineage os.
Click to expand...
Click to collapse
It's not rooted, so just flash it in the stock recovery?
rrohanjs said:
It's not rooted, so just flash it in the stock recovery?
Click to expand...
Click to collapse
Of course not!
You always need an unlocked bootloader and Twrp while flashing zips,this ain't nexus my frand.
Mr.Ak said:
Of course not!
You always need an unlocked bootloader and Twrp while flashing zips,this ain't nexus my frand.
Click to expand...
Click to collapse
So how do i update this now?
Everyone who was on this software had to root to update further?
rrohanjs said:
So how do i update this now?
Everyone who was on this software had to root to update further?
Click to expand...
Click to collapse
No,but you won't get OTA's as cyanogen server shut down months ago!
So you must have to flash lineage os (in order to make the device not obsolete and he'll(buyer) get updates too and you just have to show him how to proceed with updates on TWRP and that if any issue arises,he should contact you))and then sell it,although,I didn't liked the idea of selling such a beauty like Oneplus One.
Edit- Proceed with this thread in case you're lost,
https://forum.xda-developers.com/showthread.php?t=2788632
Mr.Ak said:
No,but you won't get OTA's as cyanogen server shut down months ago!
So you must have to flash lineage os (in order to make the device not obsolete and he'll(buyer) get updates too and you just have to show him how to proceed with updates on TWRP and that if any issue arises,he should contact you))and then sell it,although,I didn't liked the idea of selling such a beauty like Oneplus One.
Click to expand...
Click to collapse
Lol i do love this phone i have 2 of them at home lol, well im selling it because i need a phone with nano sim card as my standby phone so removing this
Will try to sell it as is or root it if the seller wants it
I'm getting 6.5 for it on olx, good enough?
rrohanjs said:
Lol i do love this phone i have 2 of them at home lol, well im selling it because i need a phone with nano sim card as my standby phone so removing this
Will try to sell it as is or root it if the seller wants it
I'm getting 6.5 for it on olx, good enough?
Click to expand...
Click to collapse
Yes, considering the fact that there is redmi 4 available at 7k,very good enough.
Although,to make buyer more protective,you should sell your device with Nougat on it.
It doesn't take much time to unlock bootloader,flash twrp and flash any OTA supported nougat ROM,see my updated post above,I linked you a thread.
Mr.Ak said:
Yes, considering the fact that there is redmi 4 available at 7k,very good enough.
Although,to make buyer more protective,you should sell your device with Nougat on it.
It doesn't take much time to unlock bootloader,flash twrp and flash any OTA supported nougat ROM,see my updated post above,I linked you a thread.
Click to expand...
Click to collapse
Cool thanks I'll find time and do it
rrohanjs said:
Cool thanks I'll find time and do it
Click to expand...
Click to collapse
Lol,I'm your co-pilot.
Mr.Ak said:
Lol,I'm your co-pilot.
Click to expand...
Click to collapse
Lol
Mr.Ak said:
Flash the latest firmware and flash lineage os.
Click to expand...
Click to collapse
Sorry bro i'm going to bother you a bit
So i rooted it and it's on cyanogen os 12 5.0.2 now, so now i can't flash a nougat rom directly right ?
How would i know which firmware to flash, damn it's been ages flashing stuff on oneplus one
or can i just flash a cm13 snapshot and then flash a nougat rom ?
rrohanjs said:
or can i just flash a cm13 snapshot and then flash a nougat rom ?
Click to expand...
Click to collapse
That's much better.
Mr.Ak said:
That's much better.
Click to expand...
Click to collapse
so i could flash the rom but gapps failed, using open gapps stock package, got an error saying
insufficient storage space available in system partition. you may want to use a smaller open gapps package or consider removing some apps using gapps-config
trying with nano package now
rrohanjs said:
trying with nano package now
Click to expand...
Click to collapse
No need to flash Gapps now,we are just flashing cm13 snapshot to be on proper firmware.Then while flashing Nougat rom you can flash Gapps(opengapps.org -arm-7.1.x-pico/nano).
Mr.Ak said:
No need to flash Gapps now,we are just flashing cm13 snapshot to be on proper firmware.Then while flashing Nougat rom you can flash Gapps(opengapps.org -arm-7.1.x-pico/nano).
Click to expand...
Click to collapse
yea i meant with nougat rom only, not with snapshot
rrohanjs said:
yea i meant with nougat rom only, not with snapshot
Click to expand...
Click to collapse
Did it worked?
Mr.Ak said:
Did it worked?
Click to expand...
Click to collapse
Yes just rebooted all good, thanks a lot bro