hello everyone. PLease Helpppppppppppppp - General Questions and Answers

I have a Question.. So I have micromax doodle3 A102. which sucks.. I rooted the phone with rootking. In the whole process my IMEI number is gone.. it says invalid.. I tied every possible manner.. Laslt I came to know about the enginner mode but in when I press the command button it says "This command is not allowed in Userbuild"?? what the **** is that and what should I do.. I am frustrated now.. Please helppp

Use MTKdroidTools.

Yes, its a userbuild. Android have 3 types of builds, eng, user and debug. Many commands its only allowed in debug and eng mode. But u can use 3dy apk like champelephon to recover the imei. But this apk is ilegal in many countryes... its u own risk.

Related

[Q] Jiayu G3 (Locked)

Hello guys. My Jiayu G3 was locked because I let a kid play on the passcode for too many times and now its locked. It says "Too many attempts" and its asking for a username and password, which is basically your google account. Unfortunately i turned off the wifi so now no matter how many times i entered my account it says "Invalid username or password" and now its stucked there. I cant also enter recovery mode by pressing Power + Volume Up button then the robot with the red triangle is appearing. Any ideas what should i do to fix it? plss help me... its been like this for months now, cant even use it.... or theres no more hope and i should just buy a new phone?
bump
Try SP Flash tool to flash Rom i think it will work..
if u need help how to flash rom with flash tool. Just flow instruction on this page http://www.modaco.com/topic/359590-...very-ics-spell-check-fixed-jelly-bean-update/
specially "JellyBean Official Update How To" Section on above page
hey will this still work even if i dont have USB Debugging enabled? alos my phone is not rooted.. i got to know this stuff when my phone got locked and i searched for a fix.
Yes it will work no need of ROOT or USB Debugging Just follow instruction on above link..
Press Thanks If I help you
faizkalwar said:
Yes it will work no need of ROOT or USB Debugging Just follow instruction on above link..
Press Thanks If I help you
Click to expand...
Click to collapse
um, which instruction should i follow first?

Can't call after I do a factory reset..!!!!!!!!!!!!

Last week my phone:laugh: rebooted again and again showing the "android robot" sign ...I submitted my phone to micromax service centre ..They told me that it will take around 15-20 days for the repair since its a motherboard problem...I kept it for 20 days...After the repair I used it for half of the day..When I came home I thought of clean installing new apps after doing a factory reset from the setting...After i did that I was able to use my phone perfectly normal...I installed quality games and useful apps from the appstore.....Then after sometime I noticed that I was not able to do any calls nor I recieved any calls,...The network sign status was perfect above and I went and showed it the next day again to the micromax centre ...They told me why I did a factory reset...?Also they told me nonsense :laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh: that if u do factory rest u r imei will get erased.They took my phone checked my imei number ...It showed invalid to them...They again put and gave me my imei number and warneed me not to reset my phone.... Now I have bought my phone back ...I want to simply do a clean install of stock jelly bean rom and dont want that Imei erasing problem...What should I do...??????
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
thanks a lot bro
thanks a lot brother. i've solved my imei problem with ur solution. really thanks a lot. urs is ultimate solution
:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
i've one more problem bro.. that is even my phone is in debugging enabled mode my pc is showing me to put my phone in debugging mode. so could u do some help here kindly. & i want to root my phone& i've tried framaroot, z4root, z4 zte blade root, terminal emulator method, but no use, so pls help me to root my phone. to root it, it should be connected & detected by my pc with debugging enabled mode observed by my pc. so pls help me
chaitu.swaroop said:
thanks a lot brother. i've solved my imei problem with ur solution. really thanks a lot. urs is ultimate solution
:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
i've one more problem bro.. that is even my phone is in debugging enabled mode my pc is showing me to put my phone in debugging mode. so could u do some help here kindly. & i want to root my phone& i've tried framaroot, z4root, z4 zte blade root, terminal emulator method, but no use, so pls help me to root my phone. to root it, it should be connected & detected by my pc with debugging enabled mode observed by my pc. so pls help me
Click to expand...
Click to collapse
Guess you are on jb 4.1.1. So in this case, bin4ry method and some others may not work.
Pls use THIS GUIDE TO ROOT YOUR PHONE.
It explains everything in detail.
But before trying the above,don't forget to install proper drivers,or nothing will happen(flashing won't start). Use THIS GUIDE TO INSTALL PROPER DRIVERS FOR CANVAS 2
Sent from my I9300 using xda premium

Imei invalid after factory reset

I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
mickeybatio said:
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
Click to expand...
Click to collapse
Those Guys out there in MMX service centre are nut xD.Okay you got your imei wiped .Its actually due to change of ur mother board.not an problem.its easy to implant it again.find ur both imei number in the packaging box .note it down in a piece of paper.now go to engineer mod and select GPRS .Choose the first sim and enter the first imei there .click write imei ---> ok , click attached--->ok ,click detached---> okay
Now repeat this for the second sim and enter the second imei.reboot the phone. Now check ur imei You can now reset your phone even for 1000 times but you have to implant it again and again every time u flash a new rom or reset
engineer mode
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
chaitu.swaroop said:
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
Click to expand...
Click to collapse
first select usb debuging option in developer optiion
then in eng mod go to radio wave option and put imi no
hi brother. thanks a lot for ur reply. i've tried what u said. but i'm unable to find that radio wave option. could u pls give the exact path so that it will be helpfull to me.
pls save my phone.
even though i put my phone in debugging enabled mode my pc is showing like pls put debugging mode on. this is another problem i am having right now. to root my phone i need this debugging mode enabled in pc. i've tried framaroot, z4root, z4 zte blade root, terminal emulator all the methods without pc i've tried to root my phone, but no use.
pls help me in this issue.
thanks a lot in advance :good:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Download the imei writing tool for m a110 http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A110/Tools/
What if i do not know the IMEI nos?
very easy, back on ur phone inside d battery place
kamalahasang said:
What if i do not know the IMEI nos?
Click to expand...
Click to collapse
hi fnd u can know ur imei very easily. it is just back of ur phone. remove d battery & u can have ur both imei no.s there.:laugh::laugh:
hit thanks bcoz u know to hit as i helped u.
no luck at send failed heeeeeeeeelp please
chaitu.swaroop said:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
fix it plzz
xdag700 said:
fix it plzz
Click to expand...
Click to collapse
IMEI is quite easy to fix ! Use MTK Droid tools to write ur imei or S/N Write tool. There are many tutorials browse through for how to use this tool !
Flashing stock ROM through SP should solve imei. First select format in sp and then flash ROM through sp. Then after first boot take imei backup as mentioned in this thread. And replace it every time u face problem !
http://forum.xda-developers.com/mic...artition-a110q-canvas-2-t2568182/post48447661
( See only IMEI related in this thread. Leave others )
Reset IMEI of A110
Hey! I have got the same problem in my Canvas HD. What I do is:-
1. goto dialer and type *#*#3646633#*#*
2. Goto CDS information
3. Goto Radio
4. On the command bar, type AT+ EGMR, 1,7"YOUR IMEI"
5. And send command
If it says command sent, then good but if not, remove SIM and try again .
6. Reboot
Note: For SIM 1, the command is AT+ EGMR, 1,7"YOUR IMEI" but for SIM 2 it is, AT+ EGMR, 1,10"YOUR IMEI"
I hope you got the answer! :fingers-crossed: :fingers-crossed:
my frnd was gettin this error so i told him this method
everything went well but after reboot his device showing the same error again plz help

HTC D310w bricked and restore SKU ;CID ;IMEI

OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap
Dear brother, i have similar problem which happened after flashing custom rom on htc desire 310 dual sim. the phone cant detect any network and all sim slots reads null invalid imei also is prompting for SKU, CID. Please help.
victormm.uk said:
OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap
Click to expand...
Click to collapse
Info
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time
Dear victormm,
Thank you very much as i solved problem with sku,cid and imei on htc by proper following steps and using tools which you sent me. I thank you so much currently i have just to say thank you very much and wish you happy xmas & new year.
Regards,
Godson.
Simple just press vol down and connect to pc
With maui meta tool its very easy no need to root
Easy and time saving
victormm.uk said:
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time
Click to expand...
Click to collapse
Senior Member477 posts Thanks: 16
HTC Desire 310 Single SIM Invalid IMEI cause CID is Incorrect
Dear brother based on this thread, i have similar problem which happened after factory reset on htc desire 310 single sim. the phone cant detect any network and the single sim slots reads null invalid imei also is prompting for SKU, CID. Please help me brother...

I really need help ASAP

I have followed the post of how to unlock bootloader on every G7 devices ( I currently using G710N version ) , I somehow almost success , but now I'm stuck in fastboot mode , no way out , the phone doesn't allow me to boot , and when I connect it to PC and write those ADB codes , it keeps saying " Waiting for devices ... " , or says nothing and starts a new code line , now I just wanna go back to the stock , but if some kind people help me out , maybe I can continue to finish the flash rom process . Guys please , I'm really panicking right now
Are you getting download mode?
Can you atleast enter download mode ?
Try this, it worked for me
[HOW TO] Recover from any hardbrick or red case in 9008 mode without ANY BOXEs
Well guys, its finally here!! You can finally unbrick your device without any jtag,medusa, octopus box!! DISCLAIMER: IM NOT RESPONSIBLE IF THIS DOES SOMETHING BAD TO YOUR DEVICE WHICH IT SHOULDNT. WARNING: THIS WILL DELETE EVERYTHING IN THE...
forum.xda-developers.com
I have mentioned in the guide ... after you finish the process you have to flash the KDZ firmware for your phone model in order to restore it

Categories

Resources