Flashed it succesfully but CSC is still BTU , so i cant recieve OTA that way ..
Any solution for that ?
Alot of people have the same problem help us
Producenta said:
Flashed it succesfully but CSC is still BTU , so i cant recieve OTA that way ..
Any solution for that ?
Alot of people have the same problem help us
Click to expand...
Click to collapse
Do the factory reset via recovery
Sent from my SM-G928C using Tapatalk
the COK5 firmware contains multiple CSC that does not force 1, try to use COJ9, that one should switch it to XEF, and *THEN* flash COK5
Hey, any quick link for that firmware? i've tried in samfirmware tool but it gave me only the last 5.1.1 french firmware
lupin85 said:
Hey, any quick link for that firmware? i've tried in samfirmware tool but it gave me only the last 5.1.1 french firmware
Click to expand...
Click to collapse
try for www.galaxys-team.fr if you understand french it's a good one for IDM donwloading :good:
BRiANj64 said:
the COK5 firmware contains multiple CSC that does not force 1, try to use COJ9, that one should switch it to XEF, and *THEN* flash COK5
Click to expand...
Click to collapse
not working for me !
BRiANj64 said:
the COK5 firmware contains multiple CSC that does not force 1, try to use COJ9, that one should switch it to XEF, and *THEN* flash COK5
Click to expand...
Click to collapse
I managed to have marshmallow !!
Must flash the rom 5.1.1 XEF via Odin, then i change the lfaut CCS XEF is by default BTU
You must root the phone with her:http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Then with phone info in secret code you are looking for
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You change the csc in XEF, the phone reboot in recovery, you reboot to verify if csc have changed, you reboot in recovery, wipe cache, factory reset, and reflash 5.1.1 XEF via Odin, after reboot you can upgrade to marshamllow !
samtab37 said:
Where did you find COJ9 ?
Click to expand...
Click to collapse
Sammobile check there, download is really slow but it'll be worth it
BRiANj64 said:
the COK5 firmware contains multiple CSC that does not force 1, try to use COJ9, that one should switch it to XEF, and *THEN* flash COK5
Click to expand...
Click to collapse
it's not working. Still BTU
kostekcom said:
it's not working. Still BTU
Click to expand...
Click to collapse
I had also a lot of problems to change the csc code. But now it works. First I flashed the G920FXXU3COI9_G920FOXA3COI9_G920FXXU3COI9_HOME.tarmd5 with odin I reset the phone in recovery Vol +, Home and power. Factory reset.
Then I booted the phone and choose factory reset in settings. Then afterwards I restart the phone in recovery and whoop it was changed into XEF.
Now I'm flashing G920FXXS3COK5_G920FOXA3COK5_G920FXXS3COK5_HOME.tar.md5 and then I hope that the MM update will come popup for download fingers crossed
Wuter said:
I had also a lot of problems to change the csc code. But now it works. First I flashed the G920FXXU3COI9_G920FOXA3COI9_G920FXXU3COI9_HOME.tarmd5 with odin I reset the phone in recovery Vol +, Home and power. Factory reset.
Then I booted the phone and choose factory reset in settings. Then afterwards I restart the phone in recovery and whoop it was changed into XEF.
Now I'm flashing G920FXXS3COK5_G920FOXA3COK5_G920FXXS3COK5_HOME.tar.md5 and then I hope that the MM update will come popup for download fingers crossed
Click to expand...
Click to collapse
Got a mirror for G920FXXU3COI9_G920FOXA3COI9_G920FXXU3COI9_HOME.tar md5? because Sammobile is so slow and I cant seem to find it on SamFirm
DinoArmadillo said:
Got a mirror for G920FXXU3COI9_G920FOXA3COI9_G920FXXU3COI9_HOME.tar md5? because Sammobile is so slow and I cant seem to find it on SamFirm
Click to expand...
Click to collapse
https://docs.google.com/uc?id=0B-luk2t8r_GQbU1aX0tFcmxlZmc&export=download this was the link
Now my CSC is still XEF but no update found yet
BRiANj64 said:
the COK5 firmware contains multiple CSC that does not force 1, try to use COJ9, that one should switch it to XEF, and *THEN* flash COK5
Click to expand...
Click to collapse
Wuter said:
I had also a lot of problems to change the csc code. But now it works. First I flashed the G920FXXU3COI9_G920FOXA3COI9_G920FXXU3COI9_HOME.tarmd5 with odin I reset the phone in recovery Vol +, Home and power. Factory reset.
Then I booted the phone and choose factory reset in settings. Then afterwards I restart the phone in recovery and whoop it was changed into XEF.
Now I'm flashing G920FXXS3COK5_G920FOXA3COK5_G920FXXS3COK5_HOME.tar.md5 and then I hope that the MM update will come popup for download fingers crossed
Click to expand...
Click to collapse
before you flashed G920FXXU3COI9_G920FOXA3COI9_G920FXXU3COI9_HOME.tar md5, which firmware you were running?
Official firmware from PRO (Proximus) belgian carrier
BRiANj64 said:
the COK5 firmware contains multiple CSC that does not force 1, try to use COJ9, that one should switch it to XEF, and *THEN* flash COK5
Click to expand...
Click to collapse
Does not work.
DinoArmadillo said:
Got a mirror for G920FXXU3COI9_G920FOXA3COI9_G920FXXU3COI9_HOME.tar md5? because Sammobile is so slow and I cant seem to find it on SamFirm
Click to expand...
Click to collapse
Here you go.
I uploaded it to G drive.
goo.gl/QATtTW
Together with the PIT file i used.
Please hit thanks
Kapitein187 said:
Here you go.
I uploaded it to G drive.
Together with the PIT file i used.
Please hit thanks
Click to expand...
Click to collapse
And how to flash the pit file?
Loudly said:
And how to flash the pit file?
Click to expand...
Click to collapse
With in Odin (i provided a working one also on Drive) you have the tab: Log, next to that: option and next to that you see PIT. Ingnore the message you get, and then flash.
After that reboot in Download mode and load the ROM on AP> Flash and voila.:fingers-crossed:
Kapitein187 said:
With in Odin (i provided a working one also on Drive) you have the tab: Log, next to that: option and next to that you see PIT. Ingnore the message you get, and then flash.
After that reboot in Download mode and load the ROM on AP> Flash and voila.:fingers-crossed:
Click to expand...
Click to collapse
Hm, my CSC is on DBT. No change.
Can you help?
Loudly said:
Hm, my CSC is on DBT. No change.
Can you help?
Click to expand...
Click to collapse
Flash to a CSC that is not included in the XEF multi-CSC.. PHN(The Netherlands) did the trick for me, factory reset, then it should be switched to PHN, and then flash the latest XEF firmware(which is 6.0.1 on samfirm now). France always gets updates first so if you wanna stick with official firmware you need to have XEF as active CSC to get updates for the france ROM
Related
PRE ROOT FIRMWARE SM-N900 FOR FLASH VIA ODIN
Rom for flash via PC Odin
Kernel -stock, Recovery - stock
WARNING! After flash this ROMs you are will have: binary - Samsukng official, system - custom
If you needs wipe user data, open recovery and select WIPE DATA/FACTORY RESET
Superuser.apk (SuperSU)
Now you are free to choose what kind of modem and location you prefer to use it because the firmware is divided into three parts
CODE - PDA, MODEM - RADIO, CSC - LOCATION
In addition, you can make owners CSC. Packing cache.img and hidden.img into Odin package use this tool [TOOL] TAR.MD5 PACKAGER
DOWNLOAD:
How to flash
PUSH THE BUTTON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Thanks
Chainfire, DjeMBey
So can I on only flash the PDA in order to get root and keep the existing modem and csc?
thanks.
Sent from my SM-N9005 using Tapatalk 2
Is it no wipe?
Sent from my SM-N900 using xda app-developers app
May I know What about Knox? Will it trigger it become 0×1?
Create system.img method and S4 same?
joechan said:
So can I on only flash the PDA in order to get root and keep the existing modem and csc?
thanks.
Click to expand...
Click to collapse
You are must or select some CSC or make it self and flash together with PDA
Chenglu said:
Create system.img method and S4 same?
Click to expand...
Click to collapse
Yes 32 bit into block
raitospk said:
May I know What about Knox? Will it trigger it become 0×1?
Click to expand...
Click to collapse
I would say definitely yes...
lynx2025 said:
Is it no wipe?
Click to expand...
Click to collapse
Yes - no wipe, for wipe wipe data/ factory reset
iznee said:
I would say definitely yes...
Click to expand...
Click to collapse
No N900 hasnt this info into odin mode
Anyone who has successfully flashed this...could you be kind enough to state:
1-Your device model
2-Original firmware
3-Region
4-Any problems arising after flashing
Thank a million...
---------- Post added at 08:29 PM ---------- Previous post was at 08:27 PM ----------
A.S._id said:
No N900 hasnt this info into odin mode
Click to expand...
Click to collapse
Ooppsss...Sorry my bad...after too much reading, my impression was that, if you disturb anything, the first thing that will happen is Knox warranty void.
Sorry again...got to read more.
Thanks.
Hello there ,
I have a small query b4 I do want to know if I m wrong or correct
I wanna use the pre rooted file u have for Note3
and I want indian csv bootloader etc can I extract that from indian stock firmware merge with your files and flash it will it be ok as I don't want to kill my Baby
Any help is appreciated
123hiten said:
Hello there ,
I have a small query b4 I do want to know if I m wrong or correct
I wanna use the pre rooted file u have for Note3
and I want indian csv bootloader etc can I extract that from indian stock firmware merge with your files and flash it will it be ok as I don't want to kill my Baby
Any help is appreciated
Click to expand...
Click to collapse
You can take my preroot PDA, make your CSC packing cache.img, hidden.img into .tar and flash
BOOTLOADER and MODEM possible unused
I have a question...the SM-N900 device must have the same firmware region code (XXU) as the uploaded files or it doesn't matter? I'am a little bit confused.
Thanks.
iznee said:
Anyone who has successfully flashed this...could you be kind enough to state:
1-Your device model
2-Original firmware
3-Region
4-Any problems arising after flashing
Click to expand...
Click to collapse
First of all Thanks A.S._id.
I flash, because I need two thing : french and root.
My phone come from Thailand and I flash only PDA, no region change.
I have french language now :good:
For root, it did write something about blocking SU (or something like that) on first boot, I did clean the message too quiclky.
But so far no root and SU fail
(I'm going to try the recovery there : [RECOVERY]CWM Based Recovery 6.0.3.7 for N900 N900S N9005 N9006 N900T
EDIT : Finaly, with CWM and SU update, My device is rooted !
Thanks a lot
!!!
Description: http://forum.xda-developers.com/showpost.php?p=46024258&postcount=1
Made of CAC-N900XXUBMI5 After flashing, just go through all the settings, go to the market, download and put it SuperSU open it and perform all the requirements of what he will ask all) KNOX not swear.
Download
Thanks for the help last time with the CSC thing
Wanted to know one more thing are you also working on N900 deodex Rooted firmware as I m planning to start a theme on that
I tried on odex but I m loosing wifi
Any help is appreciated bro
KNOX?
Hi there,
The device is NOT fully rooted, actually, well, even after applying
http://forum.xda-developers.com/showthread.php?t=2460720 , I get crashes and instabilities among the installed apps.
Deleted all the KNOX apps using Titanium backup and applying http://forum.xda-developers.com/showthread.php?t=2463116&nocache=1 but it did not seem to help. I even did a full wipe, cache wipe, and Dalvik wipe.
Is everybody happy or is it me?
thank you
Hello All...
Could anyone teach me how to know the correct firmware or corresponding files for our bootloader, CSC, modem & PDA version? I only know there are Build Number, Baseband & Kernel version in the "About Device" section but i don't quite understand here.
Thanks in advance
Denim Guy said:
Hello All...
Could anyone teach me how to know the correct firmware or corresponding files for our bootloader, CSC, modem & PDA version? I only know there are Build Number, Baseband & Kernel version in the "About Device" section but i don't quite understand here.
Thanks in advance
Click to expand...
Click to collapse
*#1234#
or
run terminal:
$ echo | getprop
or
$ getprop > /sdcard/getprop.txt
...
hi my phone is bootlooping with error "recovery is not seandroid enforcing" so to fix it i need this rom, i am only able to go into download mode and can't access recovery mode
Android version: 5.1.1
Baseband version: G920FXXU3COJ6
Kernel version: 3.10.61-5917605
Build number: LMY47X.G920FXXU3COJ1
AP: G920FXXU3COJ1
CSC: G920FOJK3COJ3
CP: G920FXXU3COJ6
Build date: 10/01/2015
Release date: October 2015
United Arab Emirates – XSG
but it is avalable on slow download servers (50KB/s) so please someone help me and upload
G925F_XSG_G925FXXU3COJ1_G925FOJP3COJ1.zip
to google drive or mega so i can download it faster and fix this problem,thanks.
37173 said:
hi my phone is bootlooping with error "recovery is not seandroid enforcing" so to fix it i need this rom, i am only able to go into download mode and can't access recovery mode
Android version: 5.1.1
Baseband version: G920FXXU3COJ6
Kernel version: 3.10.61-5917605
Build number: LMY47X.G920FXXU3COJ1
AP: G920FXXU3COJ1
CSC: G920FOJK3COJ3
CP: G920FXXU3COJ6
Build date: 10/01/2015
Release date: October 2015
United Arab Emirates – XSG
but it is avalable on slow download servers (50KB/s) so please someone help me and upload
G925F_XSG_G925FXXU3COJ1_G925FOJP3COJ1.zip
to google drive or mega so i can download it faster and fix this problem,thanks.
Click to expand...
Click to collapse
If you pm me the link for the rom, i'll try to upload the rom on mega.
Hi @37173
The firmware you wrote is for the edge version (G925F)
I believe this is the firmware you're looking for (G920F)
Hope this helps!
- Renolz
renolz said:
Hi @37173
The firmware you wrote is for the edge version (G925F)
I believe this is the firmware you're looking for (G920F)
Hope this helps!
- Renolz
Click to expand...
Click to collapse
Yes, the CSC confirm that too. Thanks! You saved my bandwith xD
wait but on their site that said its for G920F, nvm thanks for link
You are both very welcome
- Renolz
37173 said:
wait but on their site that said its for G920F, nvm thanks for link
Click to expand...
Click to collapse
Maybe is writing error xD
---------- Post added at 12:05 PM ---------- Previous post was at 12:05 PM ----------
renolz said:
You are both very welcome
- Renolz
Click to expand...
Click to collapse
Giovix92 said:
Maybe is writing error xD
Click to expand...
Click to collapse
yeh probably ,anyway thanks for mega link download will end in 10 minutes. hopefully i will fix my S6 ,thanks again :good:
37173 said:
yeh probably ,anyway thanks for mega link download will end in 10 minutes. hopefully i will fix my S6 ,thanks again :good:
Click to expand...
Click to collapse
Do you know how to flash with ODIN? If you don't know this process, simply reply, and i'll help you.
Giovix92 said:
Do you know how to flash with ODIN? If you don't know this process, simply reply, and i'll help you.
Click to expand...
Click to collapse
yeh i used odin to flash twrp recovery and bootlooped my phone but a tutorial will always be welcome :good:
37173 said:
yeh i used odin to flash twrp recovery and bootlooped my phone but a tutorial will always be welcome :good:
Click to expand...
Click to collapse
Ok, so, if you only need to flash system: (THIS WILL ERASE YOUR DATA!)
1: Install the samsung drivers
2: Extract on your desktop the .tar.md5 file (Is a big file)
2: Shut down your phone and boot it into download mode
3: Open odin
4: Connect it to the pc
5: A message 'Added!!' will appear on the message box
6: Select PDA/AP and select the .tar.md5 file
7: Select flash and after a couple of minutes, the phone will be rebooted
8: If you gets stuck in bootloop, simply boot the phone into recovery and select :
Erase Cache partition
Erase Data/Factory reset
9: Enjoy!
Giovix92 said:
Ok, so, if you only need to flash system: (THIS WILL ERASE YOUR DATA!)
1: Install the samsung drivers
2: Extract on your desktop the .tar.md5 file (Is a big file)
2: Shut down your phone and boot it into download mode
3: Open odin
4: Connect it to the pc
5: A message 'Added!!' will appear on the message box
6: Select PDA/AP and select the .tar.md5 file
7: Select flash and after a couple of minutes, the phone will be rebooted
8: If you gets stuck in bootloop, simply boot the phone into recovery and select :
Erase Cache partition
Erase Data/Factory reset
9: Enjoy!
Click to expand...
Click to collapse
thanks going to flash AP ,wish me luck
37173 said:
thanks going to flash AP ,wish me luck
Click to expand...
Click to collapse
Good luck man!
Giovix92 said:
Good luck man!
Click to expand...
Click to collapse
yeye back to normal , but i still want to root my s6 ( though i will probably don't since i was about to brick my phone ).thank you very much again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
37173 said:
yeye back to normal , but i still want to root my s6 ( though i will probably don't since i was about to brick my phone ).thank you very much again
Click to expand...
Click to collapse
You can root your device. I suggest you, if you would to update your phone, don't root. If you would the superuser permission, then root. If the phone will stuck bootloop, then reflash all
Giovix92 said:
You can root your device. I suggest you, if you would to update your phone, don't root. If you would the superuser permission, then root. If the phone will stuck bootloop, then reflash all
Click to expand...
Click to collapse
since i last rooted my s3 (after that i used iphone mostly) could you please link me some easy root (if i am not asking too much )
its hard to find root nowadays
37173 said:
since i last rooted my s3 (after that i used iphone mostly) could you please link me some easy root (if i am not asking too much )
its hard to find root nowadays
Click to expand...
Click to collapse
I'll search for it, and i'll update you in about 2-10 minutes
Edit: Found it!: Root Guide for SM-G920F
Giovix92 said:
I'll search for it, and i'll update you in about 2-10 minutes
Edit: Found it!: Root guide for SM-G920F http://for...Rjctg&usg=AFQjCNELFdZheSP692pMXAwrEfuX9qhUfg
Click to expand...
Click to collapse
thanks you very much, though when i try to go into recovery mode (stock) it all show is android logo with samsung below on screen , bug ?
37173 said:
thanks you very much, though when i try to go into recovery mode (stock) it all show is android logo with samsung below on screen , bug ?
Click to expand...
Click to collapse
also your link is broken
37173 said:
thanks you very much, though when i try to go into recovery mode (stock) it all show is android logo with samsung below on screen , bug ?
Click to expand...
Click to collapse
Bho, without image i don't understand. Please make a photo.
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
37173 said:
also your link is broken
Click to expand...
Click to collapse
Fixed it, i've made a mistake in a bb code xD
So this one time i was trying to get my device back to stock os , everything was fine UNTIL i put the UPDATE.APP into dload without extracting
The only thing i can boot into is fastboot&rescue mode ( down volume + pwr button ) , boot gets stuck in warning sign with trying to boot into recovery or the three button combination.
Help please.
it used to have twrp 3.0.2 , flashed recovery img several times and it wouldn't boot into recovery
Rommco05 said:
Hi, which recovery u have now?
Click to expand...
Click to collapse
should be twrp 3.0.2, but i have flashed recovery.img from different rollback packages it still doesn't boot into it.
Rommco05 said:
This is wrong, before when you have twrp 3.0.2 you was able enter to?
Click to expand...
Click to collapse
i installed twrp and root at that moment. everything was fine , until i decided to go back to stock
Rommco05 said:
This is wrong, before when you have twrp 3.0.2 you was able enter to?
Click to expand...
Click to collapse
i also had a time where i think i installed the wrong rollback package with the wrong firmware.. it was able to boot into os, with older icons and some missing applications , found my mistake and got both files correctly installed again. Rooted and twrp installed.
and i decided to go back go stock again , then i screwed up in not extracting the UPDATE.APP file before putting it into dload folder in my sd card.
Rommco05 said:
So u was before on Nougat? I'm confused now, twrp which u mentioned here was for Marshmallow
Click to expand...
Click to collapse
For what i remember , i'm trying to root the device so that's why i went back to Marshmallow , yes it's before Nougat, Marshmallow, what should i do?
XGXavierX said:
For what i remember , i'm trying to root the device so that's why i went back to Marshmallow , yes it's before Nougat, Marshmallow, what should i do?
Click to expand...
Click to collapse
Try to flash system.img from update.app using fastboot.
Sent from my Honor 8 using XDA Labs
Rommco05 said:
Turn off phone. Plug to usb and turn and hold vol down. Now u will be in fastboot. If is FRP unlocked flash latest twrp. Leave result
Click to expand...
Click to collapse
Ok , i will show the results in a moment.
adriansticoid said:
Try to flash system.img from update.app using fastboot.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
the update.app from firmware?
XGXavierX said:
the update.app from firmware?
Click to expand...
Click to collapse
Yiu gotta use Huawei Update Extractor to extract the system.img, but try Rommco's suggestion first.
Sent from my Honor 8 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The phone's currently in a charging state , and by the way am i doing it right?
http://imgur.com/a/K5nZY
Rommco05 said:
Turn off phone. Plug to usb and turn and hold vol down. Now u will be in fastboot. If is FRP unlocked flash latest twrp. Leave result
Click to expand...
Click to collapse
flashed the old twrp 3.0.2 i used before and the latest 3.1.1 , both of them also gets me stuck in the warning boot. It also takes a little while to charge and boot into it.
adriansticoid said:
Yiu gotta use Huawei Update Extractor to extract the system.img, but try Rommco's suggestion first.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
can i have the command for flashing the system.img? I new to this so i had to make sure i'm doing it right.
adriansticoid said:
Yiu gotta use Huawei Update Extractor to extract the system.img, but try Rommco's suggestion first.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Nevermind , i just flashed the system.img , it boots into warning twice and got stuck there again.
Rommco05 said:
I'm a bit messed up now, sorry. (3 phones "unbricking" in same time) if you don't boot to old twrp no worries, just flash new one because it was last time on Nougat old one will not work
Click to expand...
Click to collapse
I'm not sure , i have just flashed a new system based on Marshmallow though.
Rommco05 said:
So it works?
Click to expand...
Click to collapse
Flashed twrp 3.1.1-1 frd, no luck
Rommco05 said:
So any twrp don't work old/new
edit: still no access to rom
Click to expand...
Click to collapse
Yes, no twrp works, still stuck on warning boot.
Rommco05 said:
So any twrp don't work old/new
edit: still no access to rom
edit1: but wrote flashed Marshmallow though, so after flash will rom works
Click to expand...
Click to collapse
Will call it a day , I'm busy on the weekdays , is there any way still?
can you try to flash this https://drive.google.com/file/d/0B63ZqpBoL_d8MFZjeTl1d2d4Mnc/view
and it will definitely works and dload this after flash http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92123 and reset format factory once .
You have to go in fastboot-Mode and flash stock eRecovery then dload again...
If it doesnt work you have to flash
system.img
recovery.img
boot.img
cust.img
then try to reboot or dload
If i overread something in the thread im sry
My phone will not boot
twrp not installed
The phone is unlocked
And I can go to the fastboot
None of the ROMs are installed
I wanted to install Android 8 beta
Using hwota and installed
But it was a problem. I changed the region before installing the rom to install al20c00 and then rom
But when I asked to go to rom Elemental (I installed it before twrp)
And Twrp is filed and no longer installed, says remote: partition length get error and nothing is installed. Even the official ROM
Even the phone does not reset
What should I do?
Sorry for my English, I do not know English
Thank you my friends
model: bln-l21c185 honor 6x
Jonoonsorat said:
My phone will not boot
twrp not installed
The phone is unlocked
And I can go to the fastboot
None of the ROMs are installed
I wanted to install Android 8 beta
Using hwota and installed
But it was a problem. I changed the region before installing the rom to install al20c00 and then rom
But when I asked to go to rom Elemental (I installed it before twrp)
And Twrp is filed and no longer installed, says remote: partition length get error and nothing is installed. Even the official ROM
Even the phone does not reset
What should I do?
Sorry for my English, I do not know English
Thank you my friends
model: bln-l21c185 honor 6x
Click to expand...
Click to collapse
Use team mt multi tool and tick on emui 8 and use unbrick option and extract file from oreo package because nougat files gives error after successfully flashing try to debrand section
siddhrsh said:
Use team mt multi tool and tick on emui 8 and use unbrick option and extract file from oreo package because nougat files gives error after successfully flashing try to debrand section
Click to expand...
Click to collapse
I tried but failed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Jonoonsorat said:
I tried but failed
Click to expand...
Click to collapse
Check all file some files are missing or try to extract all file and try once again ' ramdisk_recovery_a' it should be ramdisk_recovery
Or extract recovery from package and flash through recovery section
siddhrsh said:
Check all file some files are missing or try to extract all file and try once again ' ramdisk_recovery_a' it should be ramdisk_recovery
Or extract recovery from package and flash through recovery section
Click to expand...
Click to collapse
The application will not open!
When I plug in the phone it stops
Try this:
With MT flash stock recovery and eRecovery (both same version 1xx) then flash the rool-back package by pressing Vol+, Vol- and Power at the same time!
Thank you so much for all of my kernel flash and the phone is turned on!:laugh:
Jonoonsorat said:
Thank you so much for all of my kernel flash and the phone is turned on!:laugh:
Click to expand...
Click to collapse
what u do to bring it back to life?
karas1que said:
what u do to bring it back to life?
Click to expand...
Click to collapse
I just flash the boot file
And of course I've broken my phone again
And
Jonoonsorat said:
I just flash the boot file
And of course I've broken my phone again
Click to expand...
Click to collapse
Use team mt multi tool
Disable firewall and try to connect it
siddhrsh said:
Use team mt multi tool
Disable firewall and try to connect it
Click to expand...
Click to collapse
I did it
But the phone will not turn on again
I get an error inside the image
erecovery does not flash
But recovery is flash
And I can not go back from Android 8 to 7
The phone does not reset factory
Official ROM will not be installed
Jonoonsorat said:
I did it
But the phone will not turn on again
I get an error inside the image
erecovery does not flash
But recovery is flash
And I can not go back from Android 8 to 7
The phone does not reset factory
Official ROM will not be installed
Click to expand...
Click to collapse
Did you installed stock recovery
Jonoonsorat said:
I did it
But the phone will not turn on again
I get an error inside the image
erecovery does not flash
But recovery is flash
And I can not go back from Android 8 to 7
The phone does not reset factory
Official ROM will not be installed
Click to expand...
Click to collapse
last chance to restore your phone its use dc-phoenix guide
siddhrsh said:
Did you installed stock recovery
Click to expand...
Click to collapse
Yes I installed
karas1que said:
last chance to restore your phone its use dc-phoenix guide
Click to expand...
Click to collapse
How to get it?
how it works?
Jonoonsorat said:
Yes I installed
Click to expand...
Click to collapse
Use dload with b360 with sdcard other b36* will not work
Thank you for your help
My friends
I was able to turn on my phone very simply
Of course I went back to Android 6
Jonoonsorat said:
Thank you for your help
My friends
I was able to turn on my phone very simply
Of course I went back to Android 6
Click to expand...
Click to collapse
what did you do for this?
karas1que said:
what did you do for this?
Click to expand...
Click to collapse
I just installed twrp
And wipe the data
And wiped the system
I transferred the official ROM file into the dload folder inside the internal memory
And I installed an official recovery again
I installed rom with three buttons
Jonoonsorat said:
I just installed twrp
And wipe the data
And wiped the system
I transferred the official ROM file into the dload folder inside the internal memory
And I installed an official recovery again
I installed rom with three buttons
Click to expand...
Click to collapse
Official recovery is 7.0 or 8.0
I cannot find any stock boot img. After uninstalling magisk the phone goes into a boot loop. I have TWRP installed and the make n model of the mobile is: samsung galaxy note 5 SM-N920G
Please help
Here you go:
Download Samsung Stock ROM for all models (Latest Firmware)
Download the latest Samsung Stock ROM (original firmware) for all Samsung Smartphone and tablets with instruction manual.
androidmtk.com
how did you uninstall magisk via magisk manager app?
just restore the magisk created boot.img backup grab it via TWRP root/data/magisk_backup?????
let's just hope it not yet deleted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you install magisk from TWRP? Was data encrypted at that time? If yes there won't be a backup because the magisk backup is in data/adb. So twrp wouldn't be able to write the backup due to encryption. If your are stuck in a bootloop just install the firmware
Tab E said:
Did you install magisk from TWRP? Was data encrypted at that time? If yes there won't be a backup because the magisk backup is in data/adb. So twrp wouldn't be able to write the backup due to encryption. If your are stuck in a bootloop just install the firmware
Click to expand...
Click to collapse
Yes. So install through odin and all that? Would it work the same way?
BoltXavier said:
Yes. So install through odin and all that? Would it work the same way?
Click to expand...
Click to collapse
By installing the stock firmware, you will resolve the bootloop. Just restoring the stock boot img form the firmware will also do. Just remember the next time you install magisk, format data first to temporarily disable encryption.
Tab E said:
By installing the stock firmware, you will resolve the bootloop. Just restoring the stock boot img form the firmware will also do. Just remember the next time you install magisk, format data first to temporarily disable encryption.
Click to expand...
Click to collapse
Can i install that with twrp? Or do I have to remove TWRP and get the stock recovery, I am pretty new at this
BoltXavier said:
Can i install that with twrp? Or do I have to remove TWRP and get the stock recovery, I am pretty new at this
Click to expand...
Click to collapse
If you remember, in your magisk manager is ramdisk 'yes'?
Please say if it's yes or no. The process branches at this point
Tab E said:
If you remember, in your magisk manager is ramdisk 'yes'?
Click to expand...
Click to collapse
if you don't remember, no problem
Tab E said:
if you don't remember, no problem
Click to expand...
Click to collapse
It was 'Yes' and the rest two parameters were 'No'
BoltXavier said:
Yes. So install through odin and all that? Would it work the same way?
Click to expand...
Click to collapse
If ramdisk is yes, just flash the boot.img
You can extract it from the firmware
Tab E said:
If ramdisk is yes, just flash the boot.img
You can extract it from the firmware
Click to expand...
Click to collapse
BoltXavier said:
It was 'Yes' and the rest two parameters were 'No'
Click to expand...
Click to collapse
I would recommend to flash the whole firmware. Because extracting the boot img you might corrupt the boot.img and flash a corrupt img.
Update: I dont know what's wrong, I have used ODIN to install... a new recovery and Boot.img. for the model, but it is still in a bootloop.
EDIT : the original recovery has been recovered
BoltXavier said:
Update: I dont know what's wrong, I have used ODIN to install... a new recovery and Boot.img. for the model, but it is still in a bootloop.
EDIT : the original recovery has been recovered
Click to expand...
Click to collapse
I think you must flash to stock rom/firmware. Do you know how to do that?
Tab E said:
I think you must flash to stock rom/firmware. Do you know how to do that?
Click to expand...
Click to collapse
I did flash a stock rom from firmware.mobi, I hope it was what you said it was. But other than that I do not know much.
BoltXavier said:
I did flash a stock rom from firmware.mobi, I hope it was what you said it was. But other than that I do not know much.
Click to expand...
Click to collapse
So did the phone boot?
Tab E said:
So did the phone boot?
Click to expand...
Click to collapse
No, still on a bootloop
Ok sorry my mistake. I didn't read your message completely. Just restoring this boot.img recovery.img doesn't seem to work. Go ahead and restore your ENTIRE firmware. All the best
Tab E said:
Ok sorry my mistake. I didn't read your message completely. Just restoring this boot.img recovery.img doesn't seem to work. Go ahead and restore your ENTIRE firmware. All the best
Click to expand...
Click to collapse
Thanks for all the help so far. I am really dumb at this. Can you please tell me where can I get the entire firmware? I googled and SAMmobile asks me for some membership program, is there a free way?
BoltXavier said:
Thanks for all the help so far. I am really dumb at this. Can you please tell me where can I get the entire firmware? I googled and SAMmobile asks me for some membership program, is there a free way?
Click to expand...
Click to collapse
Also I live in croatia, so the firmware that has brazil mentioned in its description work for my phone?