I was able to install TWRP but can only get to it ocassionally. When my phone reboots it goes to a black screen and nothing is visible. When connected to computer it showed briefly L29 but I am actually the NXT-AL10 version. It also shows only 158 mb of memory - nothing else. Any ideas from anyone on this. I have rooted many phones before but this has me bewildered and very frustrated. Any assistance would be greatly appreciated.
Steps you took, stuff you downloaded. These are things that will help us help you
Did you tired knife tool to unbrick
jerrybritt said:
I was able to install TWRP but can only get to it ocassionally. When my phone reboots it goes to a black screen and nothing is visible. When connected to computer it showed briefly L29 but I am actually the NXT-AL10 version. It also shows only 158 mb of memory - nothing else. Any ideas from anyone on this. I have rooted many phones before but this has me bewildered and very frustrated. Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
Hi,
Ran into same problems as you, using that Italian Knife tool.
Please read here how I wrestled myself out of those troubles.
It was this thread that kept my on the right path, although I have NXT-AL10 and used the unsecure boot b156 / AL10 just to be shure
Related
I'm afraid I might have bricked my phone.
After trying to install CWM on my Huawei Honor and rebooting, a yellow warning sign appears with the following text:
"Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down."
I've read a LOT of posts regarding rooting of this device on here, as well as numerous of other sites, but half of them are outdated and the other half are uninformative or poor in quality. Nobody can seem to get this to work, but I'm still willing to try my luck on here before turning the phone in for a new one, claiming it was an OTA update that did it.
I tried rebooting into Pink/Purple screen and connecting to my computer, but it doesn't show up.. All I hear is a "connected USB" sound and no drives. I tried installing Knives & Forks, but it requires my phone to have USB Debugging enabled, which, to my LACK of luck, wasn't enabled when this error happened. I'm really freaking out, as I just got this phone.
Please, any help would be greatly appreciated!
bump..
same problem
CheckeredDots said:
bump..
Click to expand...
Click to collapse
I have same problem , It's terrible that can't find a solution about this problem.
Please help us...
some one please help. here is the same problem with me aswell
gultekinyadigar said:
I have same problem , It's terrible that can't find a solution about this problem.
Please help us...
Click to expand...
Click to collapse
I have the same problem please help.
krishnaneupanes said:
I have the same problem please help.
Click to expand...
Click to collapse
I'm having this same problem with my girlfriend device....I saw a gui that have this problem solved but i wasmn't hable to make the same and solve :S
any one can help please ??
I dont know if it will work for you guys but i managed to fix mine. I placed dload folder with desired update either GB or ICS into micro sd card. Place it in the phone, and hold Volume Up + Volume Down + Power (refering to pink screen) and mine started to flash the stock rom.
check this thread http://forum.xda-developers.com/showthread.php?t=2198184&highlight=u8860
thanks it workerd. had the same problem and solved
thanks it workerd. had the same problem and solved
Hello XDA, I have a problem with my newly acquired phone that I'd like to ask you guys about.
I'm not exactly a noob when it comes to rooting and flashing android devices, but I've researched and scoured the internet about this problem!
It seems that whenever I try to boot my phone into recovery (CWM), it just flashes the Huawei logo and shows a bright blue screen for an eternity. What's the problem here? I've tried several recovery.img files, but they all seem to do the same thing... I'm on B919 so everything should be all set. Do I have to go through all the steps again and hope for another result, or am I doing something wrong?
Please help! It'd be appreciated a lot!
-CheckeredDots
CheckeredDots said:
Hello XDA, I have a problem with my newly acquired phone that I'd like to ask you guys about.
I'm not exactly a noob when it comes to rooting and flashing android devices, but I've researched and scoured the internet about this problem!
It seems that whenever I try to boot my phone into recovery (CWM), it just flashes the Huawei logo and shows a bright blue screen for an eternity. What's the problem here? I've tried several recovery.img files, but they all seem to do the same thing... I'm on B919 so everything should be all set. Do I have to go through all the steps again and hope for another result, or am I doing something wrong?
Please help! It'd be appreciated a lot!
-CheckeredDots
Click to expand...
Click to collapse
Try the attached recovery.img.
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse
Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?
This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.
Hi guys im new here and have always followed along with rooting other phones but this time i kind of messed things up im stuck on your Device has been unlocked and cant be trusted and no other function works not fastboot and does not go into bootloader and 3 buttons not working either i have tried most of the stuff i have read but still no luck can any one help me..
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
yea buddy im stuck on the same boat but mine is MHA-L09 and at least your able to do that you can look for the adb fastboot method this can help you out im on my way out when i come back ill look for it so you can do it
I have no idea what happened beside the battery completely drained and I was left hard bricked. I only have the blinking led. No mode beside EDL. Was rooted, stock rom android 11 and stock recovery. Phone had been stolen and possibly had someone trying to get in it. Appeared fine and in working order before it died though.
I have tried 3 different version blankflash files. I have been using sofiap. A few times (tried about 50x) they went all the way through to "fastboot reboot", but fastboot NEVER opens. Just same situation as before. May be an issue with singleimage.bin? Since blankflash doesn't seem to be effective, can I use another program (Qualcomm programs, Flash tools or other)? I have tried finding a solution, searched endlessly and have the same brick I had.
Please advise and help with the exact files, links, etc. The easiest way would be awesome. I would greatly appreciate any/all assistance.
Jaymi
jayleemcnabb81 said:
I have no idea what happened beside the battery completely drained and I was left hard bricked. I only have the blinking led. No mode beside EDL. Was rooted, stock rom android 11 and stock recovery. Phone had been stolen and possibly had someone trying to get in it. Appeared fine and in working order before it died though.
I have tried 3 different version blankflash files. I have been using sofiap. A few times (tried about 50x) they went all the way through to "fastboot reboot", but fastboot NEVER opens. Just same situation as before. May be an issue with singleimage.bin? Since blankflash doesn't seem to be effective, can I use another program (Qualcomm programs, Flash tools or other)? I have tried finding a solution, searched endlessly and have the same brick I had.
Please advise and help with the exact files, links, etc. The easiest way would be awesome. I would greatly appreciate any/all assistance.
Jaymi
Click to expand...
Click to collapse
Hard bricked mine too.
Metro G Stylus 2021.
acrinym said:
Hard bricked mine too.
Metro G Stylus 2021.
Click to expand...
Click to collapse
I Switched to Slot B and now it doesn't do anything except go into EDL.
Hey @sd_shadow, any idea what we could do to fix this mess? This is a phone I'm supposed to return.
I'm still stuck with a brick. Have been for months. Took it apart (why not it doesn't work anyway) and tried the points thing to put it in edl and still nothing. WE NEED ADVICE PRETTY PLEASE.
Thanks in advance,
Jaymi
acrinym said:
Hey @sd_shadow, any idea what we could do to fix this mess? This is a phone I'm supposed to return.
Click to expand...
Click to collapse
If it's a warranty return it shouldn't matter