Related
I am getting the following error message FAILED (remote: root type is risk) when I try to relock the bootloader
fastboot oem relock ****************
...
FAILED (remote: root type is risk)
finished. total time: 0.970s
Before I got the error message I had done the following:
- flashed to stock recovery (phone is not rooted any more)
- factory reset
- Someone know how to resolve this issue?
- Could this be fixed by installing fresh and untouched complete firmware from huawei?
- If yes, some know which link to use for my device and version?
Model number: HUAWEI NXT-L09
Buld number: NXT-L09C432B152
All help is highly apprechiated.
Instead of factory resetting after flashing stock recovery, try reflashing stock rom using dload method. Then try relocking.
Sent from my HUAWEI NXT-L29 using Tapatalk
tdamocles said:
Instead of factory resetting after flashing stock recovery, try reflashing stock rom using dload method. Then try relocking.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
You know where I can download the exact rom for my device?
Try in here... http://forum.xda-developers.com/showthread.php?t=3317588. You need to find the full ones at about 1.4gb. Or try in here... http://forum.xda-developers.com/showthread.php?t=3358793.
Sent from my HUAWEI NXT-L29 using Tapatalk
Does the dload method work when rooted?
tdamocles said:
Instead of factory resetting after flashing stock recovery, try reflashing stock rom using dload method. Then try relocking.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Hi there, I would also like to go back to the out of the box state of my Mate 8, I have 1 problem though, I cant unroot it, the fully unroot function within the Super SU app always fails, can I flash the official firmware on top?
Thanks!
tdamocles said:
Instead of factory resetting after flashing stock recovery, try reflashing stock rom using dload method. Then try relocking.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
is there a certain method to relock the bootloader, after dload stock rom method?
Use the tool by somboons
bluheart said:
Use the tool by somboons
Click to expand...
Click to collapse
I have NXT-L29...I tried to relock with somboons tool and also get same error...FAILED (remote:root type is rist) AND this was after flasing stock rom ...no root... stock recovery.
Check if twrp still exist. Also check for any system changes that you did.
dload the latest stock then factory reset and then relock
Hi @bluheart
The latest stock download you have linked to your posts at the bottom....can I update my NXT-L29 C900 B188 with it just using the dload method? or must i debrand first.
You have to use your original firmware and then relock
Dear great team i really need your help to unroot and remove twrp from my Mate S, i have the stock room but whenever i am trying to use the SD card method it takes me back to twrp recovery, i tried to flash the rom via twrp recovery but in vain as i can see the dload but unable to flash it.
Pleeeese help and explain the steps
Regards
Jomer111 said:
Dear great team i really need your help to unroot and remove twrp from my Mate S, i have the stock room but whenever i am trying to use the SD card method it takes me back to twrp recovery, i tried to flash the rom via twrp recovery but in vain as i can see the dload but unable to flash it.
Pleeeese help and explain the steps
Regards
Click to expand...
Click to collapse
Flash latest stock firmware via TWRP and reboot into Huawei recovery and wipe and reboot. You will be on stock
Can you please explain the process
Best Regards
Sent from my HTC 10 using XDA-Developers mobile app
The only way I got this relocking error sorted was:
1. remove root completely
2. flash stock recovery
3. dload stock rom
This process locks the boot loader automatically and it is "Locked" not "relocked"
It works thank you so much for the support
Sent from my HTC 10 using XDA-Developers mobile app
Finefeather said:
The only way I got this relocking error sorted was:
1. remove root completely
2. flash stock recovery
3. dload stock rom
This process locks the boot loader automatically and it is "Locked" not "relocked"
Click to expand...
Click to collapse
NXT-L29C432B180
i have full format, installing b180. i reset factory next flash recovery from B180 and install dload B180 and sill unlock bootloader. any solution?
GUYS!!! fIRST OF ALL, STOCK = FULL STOCK, include a CUST mod and OEMINFO.
You must flash it before you relock. It will help u, because I had same problem before. Now, it's FULL BACKED to stock.
stefcio102 said:
NXT-L29C432B180
i have full format, installing b180. i reset factory next flash recovery from B180 and install dload B180 and sill unlock bootloader. any solution?
Click to expand...
Click to collapse
You MUST use @somboons tool to change CUST and OEMINFO to the ROM you are wanting to use as stock. If this does not match dload will not lock your bootloader.
Read @somboons threads... it will work if you have all things correct...
Hi! I need to lock a bootloader of my Honor 8. Can you help me please?
I downloaded stock ROM FRD-L09C432B120. What next should I do?
What does "dload" mean? Thank you in advance!
I am on rooted stock B331 and I just received an update to B356 (492 MB). If I acceot the OTA will the bootloader get locked? I know I will most likely loose root and twrp. I'd like to updated but not get locked again. Any advice?
Or should I flash the image file in TWRP along with insecure boot?
If anybody has gone this route please advice. Thanks
huh? thats new! here i thought that once u unlock bootloader and root u dont receive ota updates anymore! how is that possible?!
in any case, whats the big deal about bootloader getting locked? u just unlock it again using your code via fastboot, no problem then flash twrp and supersu, done!
Sent from my Huawei Mate 8 NXT-AL10
jbmc83 said:
huh? thats new! here i thought that once u unlock bootloader and root u dont receive ota updates anymore! how is that possible?!
in any case, whats the big deal about bootloader getting locked? u just unlock it again using your code via fastboot, no problem then flash twrp and supersu, done!
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
Yeah, I know it is wierd. My bootloader is unlocked, I'm rooted and have twrp installed and received the B356 OTA this morning.
I was hopping to dirty flash so I don't have to go through all the setup process again
true, unlocking BL again would mean that your phone would be reset...
Sent from my Huawei Mate 8 NXT-AL10
You can still do OTA'S with an unlocked bootloader. You should be able to OTA but it may remove root or fail in the process because of root. I always recommend backing up the stock rom in TWRP so you can always go back to it to take an OTA. Fastboot flash the stock rom you're on and the stock recovery then boot up and take the OTA then fastboot flash twrp again.
I have also received the notification for b357 and I am on stock rooted b356...sounds fishy, I am not updating
malekowsky said:
I have also received the notification for b357 and I am on stock rooted b356...sounds fishy, I am not updating
Click to expand...
Click to collapse
I'd love it if anybody could make a flashable zip rooted B356 or 357 rom to be safe.
Need to get a OEM TWRP backup of MHA-L29C636 AUS/Asia model. I have offline dload of rom, data, vendor files which I will share if this works. Will mean can debrand via these files only by bootloader unlock ,Twrp flash, fastboot flash back std recoverey and dload.
If someone can upload OEM partition TWRP backup for this model. Thanks ahead
Sent from my MHA-L09 using Tapatalk
Here https://www.mediafire.com/download/szws87sk7rrkqr6
Thanks to @eddmecha
https://forum.xda-developers.com/ma...products-vendo-bootloop-t3534594/post70977833
Flashed this OEM and somehow locked my boot loader.. Only goes into erecovery currently away from my PC so bricked until home tbc
Sent from my iPad using Tapatalk
DanXbix said:
Flashed this OEM and somehow locked my boot loader.. Only goes into erecovery currently away from my PC so bricked until home tbc
Click to expand...
Click to collapse
What you where trying to achieve?
There is an offline update for c636 in this thread post number 3 https://forum.xda-developers.com/mate-9/help/help-wiped-products-vendo-bootloop-t3534594/page8
You need sd card and copy the dload folder to ur sd,press 3 buttons,power+ vol up+ vol down till the update start.
Yes I know thought I had on microsd already
Sent from my iPad using Tapatalk
But unsure if this will work via flashing only OEM partition as I currently only have L09C34B122 and do not get any updates as Optus Aus are extremely slow at releases. I am trying to getting around extremely over priced debrand of funkyhuawei
Sent from my iPad using Tapatalk
I'm trying to rebrand AL00C00 to L29C636 ,the update started,will let you know how it goes.
It seems successful,but need to flash hw_data.
Brb
I have both and hwdata so awesome that's a cheap way of rebranding
Sent from my iPad using Tapatalk
DanXbix said:
I have both and hwdata so awesome that's a cheap way of rebranding
Click to expand...
Click to collapse
Yep,but i couldn't find hw_data for b115 will try b136
Edit: it's working
Link b136 hw_data? Awesome won't be home until tomorrow will report mine.
We should create a guide for a free unbrand
Sent from my iPad using Tapatalk
So the steps are:
1-Unlock bootloader
2- install twrp
3- restore oeminfo for C636 http://www.mediafire.com/?szws87sk7rrkqr6
4- dload c636 offline firmware https://forum.xda-developers.com/ma...products-vendo-bootloop-t3534594/post70465883
5- unlock bootloader again
6-install twrp again
7- flash hw_data for c636b136 http://update.hicloud.com:8180/TDS/...f1/full/hw/spcseas/update_full_hw_spcseas.zip
8-dload c636 offline firmware again to have locked bootloader and get rid of the warning message lol
9 factory rest from settings.
10-use system update to get the latest firmware.
11 done
Here
Here too
gm007 does it work for MHA-L09C605B111 ???
It sure will
Sent from my MHA-L29 using Tapatalk
In twrp failed ! it shows me "could not find 'meta_inf/com/google/android/update-binary' in the zip file"... help?
If I do this and relock the bootloader, will I still be able to use android pay?
krackers44 said:
If I do this and relock the bootloader, will I still be able to use android pay?
Click to expand...
Click to collapse
That's a good question, would Android Pay work on devices who were unlocked, but are now re-locked again?
Hi, is It possible to relock bootloader for to have warranty back?
Thanks
once you flash the stock img, it will be locked again.
Till Nougat, we had dload method which locks it fully (other method for unlocking it would just re-lock it)
shashank1320 said:
once you flash the stock img, it will be locked again.
Till Nougat, we had dload method which locks it fully (other method for unlocking it would just re-lock it)
Click to expand...
Click to collapse
Hey, i am in the same situation and after flashing the stock rom + stock recovery my bootloader is still unlocked, and i still get that "This device has been unlocked and can't be trusted" screen on boot.
Is there any way to manually lock the bootloader?
Edit: i found this SRKTool and i was able to easily relock the bootloader. You need the Unlock code though and it resets your phone, so backup your data.
https://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797 @alboz83
Arrandale said:
Hey, i am in the same situation and after flashing the stock rom + stock recovery my bootloader is still unlocked, and i still get that "This device has been unlocked and can't be trusted" screen on boot.
Is there any way to manually lock the bootloader?
Edit: i found this SRKTool and i was able to easily relock the bootloader. You need the Unlock code though and it resets your phone, so backup your data.
https://forum.xda-developers.com/mate-8/development/[email protected]
Click to expand...
Click to collapse
Yes it will only relock the bootloader but not lock. Anyone experienced with this can get this that you had unlocked your bootloader earlier
Arrandale said:
Hey, i am in the same situation and after flashing the stock rom + stock recovery my bootloader is still unlocked, and i still get that "This device has been unlocked and can't be trusted" screen on boot.
Is there any way to manually lock the bootloader?
Edit: i found this SRKTool and i was able to easily relock the bootloader. You need the Unlock code though and it resets your phone, so backup your data.
https://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797 @alboz83
Click to expand...
Click to collapse
I relocked yesterday bootloader and my relocated easily. I can not find the update of stock firmware. Once found update. I clicked on update, update failed. I have not got the update since then. So I did relock. Very easy to relock. But my mobile update is not happening. Please give me some help
Sent from my [device_name] using XDA-Developers Legacy app
shashank1320 said:
once you flash the stock img, it will be locked again.
Till Nougat, we had dload method which locks it fully (other method for unlocking it would just re-lock it)
Click to expand...
Click to collapse
Many people say that if we flash stock rom the bootloader stay unlock. Or i have to flash in a particular mode?
With the tool i can relock but not lock, right?
alboz83 said:
Many people say that if we flash stock rom the bootloader stay unlock. Or i have to flash in a particular mode?
With the tool i can relock but not lock, right?
Click to expand...
Click to collapse
Yup
i Read somewhere that if u flash the stock rom using dload after u have relocked the bootloader, the bootloader status will change from relock to locked. does this work? can anyone try and confirm this? i want to make sure of this before i unlock. I would be greatful forever.
Thanks
Anzee said:
i Read somewhere that if u flash the stock rom using dload after u have relocked the bootloader, the bootloader status will change from relock to locked. does this work? can anyone try and confirm this? i want to make sure of this before i unlock. I would be greatful forever.
Thanks
Click to expand...
Click to collapse
Have tried to this more than 100 times and it works fine. It will be locked BL rather than relock
shashank1320 said:
Have tried to this more than 100 times and it works fine. It will be locked BL rather than relock
Click to expand...
Click to collapse
If u flash stock?
Thank you thank you thank you you're a life saver ♥
Anzee said:
If u flash stock?
Thank you thank you thank you you're a life saver ♥
Click to expand...
Click to collapse
Yes. Did you solve the BL state?
shashank1320 said:
Yes. Did you solve the BL state?
Click to expand...
Click to collapse
No I haven't even unlocked the bl yet. I just wanted to make sure it the relock to lock state was possible before I unlock. I will do so soon when I get some time.
Anzee said:
No I haven't even unlocked the bl yet. I just wanted to make sure it the relock to lock state was possible before I unlock. I will do so soon when I get some time.
Click to expand...
Click to collapse
Yes you can always do via full ota or flashing the stock firmware via dload. Not hard to do to retain warranty:silly:
shashank1320 said:
Have tried to this more than 100 times and it works fine. It will be locked BL rather than relock
Click to expand...
Click to collapse
But dload method not work only for a single update.app file? With view 10 there are 3 files
alboz83 said:
But dload method not work only for a single update.app file? With view 10 there are 3 files
Click to expand...
Click to collapse
Use the first file, update.zip. it will contain a update.app file around 3 GB. Can use this single file.
shashank1320 said:
Use the first file, update.zip. it will contain a update.app file around 3 GB. Can use this single file.
Click to expand...
Click to collapse
Really? And I have to install over the same firmware, not an update? For example, now I'm on 162 build with unlock bootloader. If I install only update.zip of 162 build with dload method, I obtain the lock bootloader?
alboz83 said:
Really? And I have to install over the same firmware, not an update? For example, now I'm on 162 build with unlock bootloader. If I install only update.zip of 162 build with dload method, I obtain the lock bootloader?
Click to expand...
Click to collapse
Yes.
hello all guys!
i have honor 10 (now col-l29)
before rebranding (col-tl10)
may i relock the BL safety?? i have official rom
ecsalos said:
hello all guys!
i have honor 10 (now col-l29)
before rebranding (col-tl10)
may i relock the BL safety?? i have official rom
Click to expand...
Click to collapse
Why you want to relock, to gain warranty?
If so, better dload the current firmware and it will lock it safely.
because, i dont want to see everytime when i reboot my phone,this stupid message, who tells me that i have unlock bl...
i have 8.1.0.151 (c432)
i was downloaded this version when im trying to rebranding.. for official site..
if i relock with this version, the worse scenario it will be...??? brick???
if i dload the current firmware, i will install it with TWRP again? and after it will be locked safety?
and what firmware i must to dload?
Hi guys ..
hope someone can help me..
i have a bricked honor 8 ..bootloader is unlocked
frp is unlock
now i got the multitool but before i do the unbrick ..i would like to know does it relock the bootloader ??
since its 100% working im afraid to relock the bootloader since i lost the code and afraid to not be able to unbrick it then..
pls help... i need my phone
You need sdcard, then use dload metod and download service firmware here in xda
ok ..i will try..but will it relock my bootloader?
i dont want it relocked if not necessary..i lost the code
I feel so, yes, or you can try download firmware via recovery if you have stock recovery, than bootloader is unlocked
maxpaynezm said:
I feel so, yes, or you can try download firmware via recovery if you have stock recovery, than bootloader is unlocked
Click to expand...
Click to collapse
i can enter stock recovery and e recovery but if i try factory reset it just shows a red !
and if i try e recovery and do the recovery and update it says getting package info failed..
is there any method i could try to unbrick it without relocking the bootloader?
Pls someone help!!!
Its problem buy new code? 4usd
maxpaynezm said:
Its problem buy new code? 4usd
Click to expand...
Click to collapse
Yes i would prefer a working method without spending money..
Pls someone give me advice