[A700] Doesn't Boot - Acer Iconia A700 and A510

Hi,
i have problems to reactivate my A700, which i haven't yoused for a long time.
The device doesn't boot - screen stays black.
I get a little success by connecting the tablet to my pc (win 10) an set the A700 to APX-mode - the apx-device is listed in the device-manager.
Is there anything i can try to fix my A700?
Can i flash it in apx-mode?
Dof i have to get serial-numer / CPUID?
I installed the blackhund3r 500 Manager (wrong device) to test it, and it shows "A500 Detected in APX Mode, Please install driver".
I don't know what to do - can anyone help me?

Related

[help] aoson m19 bricked

Hi everyone!
Today I've tried to update my AOSON M19 tablet but something goes wrong and now the tablet is bricked. Things happened by this way:
-I've tried to update the tablet with the Rockchip Batch Tool following the recommended procedure that has worked in all the others update I've made. The procedure has formatted successfully the deviced but has filed the transfer of the image file to the tablet.
-After this step the tablet seems to be dead: it doesn't power on and the screen is black.
-I've tried to connect the tablet to the USB port of my pc (windows xp) but the system doesn't recognize it. Under Windows Hardware Manager I have an Unknown Device connected to the system USB Hub.
-I've tried to install the Rockchip drivers that have always worked before but windows tell me that the drivers specified have no information about the hardware I'm trying to install.
I'm stuck in this situation and I don't know what to do. Hope someone could help me.
Thank you very much in advise

a500 USB DRIVER VANISHES

I need a little help my device is stuck in apx mode (blank screen with power led on) i have uid (cpuid) and sbk i have read a lot fom this forum and have all the tool to root, flash, load.. But my main problem is that when i reset my acer a500 and the usb is attached the windows 7 recognizes the driver and (sound pops up) and the driver (acer picasso usb boot recovery driver) is there but no tool e.g apxtool or fastflash or ics rooting nothing works or regocznies the device coz when i press any option or press the key to continue the drive drops and vanishes from the window usb list in device manager and i have to manually reset acer again to get the driver back but still no use as command prompt tells me that no device is attached or found. Please help as this acer is my wifes gift to me and im trying hard to get it back its totally dead

[Q] Soft Brick on my Tablet ?

i think i have a soft brick on my tablet (Point of View Mobii 703) (The same: Allwinner A13)
i have booted the tablet into the upgrade mode, to install a custom rom with LiveSuit 1.11
but it says : no device seems to upgrade, i installed correctly the driver.
but i connected it again, it asks again for drivers, ok i install the same driver .... but it fails
disconnecting again and im trying to boot up normally, nothing happens, the tablet isnt going on.
its recognizing only on the pc, asking for drivers, but cant install driver. :crying:

[Q] urgent help

first of all many thanks to all the developers for doing excellent work.
i am on odyssey 4.3 rom.when i connect my phone to pc in normal mode it shows everything is fine and working but when i connect it in download mode, i'm getting android composite device driver failed error even after instlling drivers many times,i have read almost everywhere related to the issue here but of no help.and major issue is in recovery mode bymistake formatted boot and so now my device is stuck in samsung boot logo.no recognision in odin so cant flash it either way.what should i do ?
Download driver from here
http://adbdriver.com/downloads/
(Samsung offical android driver(contains MTP and ADB Driver))
Connect and uninstall current driver with yellow triangle. Disconnect and install the downloaded driver. Now connect and see.
Now follow the post
http://forum.xda-developers.com/showpost.php?p=54459555&postcount=343
if you do not want to start it from zero ie from BG ddlf2.

[Q] My Phone is complete Bricked, help me pls, nonstop restart

hi guys, (LG-P920 is my Phone)
yesterday i installed ROM MANAGER to install CWRMOD (or something like that).
Then i choose my Phone Type and flashed it. After that my phone permanent restarts in 1 second,
showing LG Logo and restart, restart restart nonstop.
I understand that i ****ed it up with flashing that recovery mod. So i decided to Plug into my PC
and install everything new, but when i connect my phone to PC , it detects a unknown device every second and does it permanently too. I tried the "Battery out, Volume Button UP and connect" trick, then it stops acting weird but my PC
dont recognise my phone as OMAP, it is just an unknown device
What should i do guys? i tried installing LG Support Tool, LG Mobile Driver, and i read all the Instruction to UNBRICK your phone.
But all the Instruction starts with a successful regocnition of OMAP driver, but my PC dont even recognise it as OMAP.
PLS HELP
ok i fixed it, it was a really complicated move to 0.1 sec click that omap and install while my Phone was permanent restarting.

Categories

Resources