Guys i own a lenovo a6000 plus today i reflashed my stock rom and twrp ended up in unable to mount/data ......however i solved it and flashed the rom and gave reboot to system then suddenly my phone went off and is not now switching on not even a vibration that it does on switching on so not able to switch on now and so I connected it to pc and there popped up approx. 10 local disksas my phone....i have uploded it in screenshot so what should i do now?????Any helps will be great...
Local disk m,n,o,p,g,i,j,k,l are the ones...
Related
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
looks like you got into a bit of trouble can you get into recovery or anything
try accessing your phone through abd maybe that would help
further help
shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
alexyaz said:
try accessing your phone through abd maybe that would help
Click to expand...
Click to collapse
I am a new user and can't post links but Google what alexyaz said to help guide you through, search something like hot to access abd to install ROM. also if you need your original software Google search the model of your phone with stock ROM.
Once you fix it due try to read all directions a few times when implementing a new ROM to make sure you don't get any unneeded errors
I flashed a custom rom runnıng on lollipop version 5 on my s5.Then due to SIM CARD reading failure and auto restarting buggs , I decided to go back to my stock kıtkat rom runnıng on 4.4.2 because I belıeve that I messed up something related to my nework signal. Maybe nandroid backup would fix it. I restored my old nandroid back up. It s completed successfully. But when ı reboot the phone, it bombarded me with ''apps has stopped'' errors and now ı cant see anythıng ın my phone. SOMEONE PLS HELP ME I BRICKED MY PHONE
edit: Alright I fixed the phone by doing factory settings and now it works fine.
Glad you got it working. I'll close this thread.
Last week i rooted my micromax a106 (Android Kitkat) with king root and later on replaced it with SU app
I was on stock rom only and didnt flash any roms. I wanted to try system partition for my phone to increase app storage.
So before that i flash CWM , took backup and tried to take imei and nvamp backup but failed to so.
Mobile uncle tools was not taking imei backup and showing sd card not found. I found another post for taking backup from pc by using mtk tools software and i tried that method but my phone was not detecting.
So I decided i wont go forward without taking these backups and flash a non rooted stock rom .
After that problem started. My phone used to switch off 4-5 times in a day and wont start quickly, like after automatically switching off i have to reinsert battery only then it will start again. My SD card used to unmount itself and wont get mounted again unless i did a restart (formatting my SD card also didnt help)
Then i found a post for installing software from pc using sp flash tools and used his stock rom file (provided in his post)
I did as it was said and successfully installed it.
I used it for 2 days everything was fine , had no issue of SD card this time (also formatted it again just to be on a safer side). But later on my phone switched off again . But this time was like only once or twice a day (based on two days usage)
Currently i have installed Stock Rom V1 (Kitkat) of Micromax A106 (obviously with stock recovery)
UPDATE : today sd card problem also started . Phone gets freezed randomly and then switches off . Have to reinsert battery to get it woking again
Please help what should i do to solve this issue
My micromax unite 2 swith off automatically some times and again used it by restarting.One day it happens again but cant switched on what is the reason my mail id [email protected]
Im in deep problem and im unable to solve
its about my acer liquid e39 and just to make it clear im a nood to the whole flashing of android
now wat happen i have a habit to always keeping the settings( unknown sources ) on
the the other day i download a antivirus for my phone named (e mobile security and antivirus) from a torrent site
it worked grate but then i realized the the licences expired from 2014 so i decided try and download a new one
well i was hoping i could fined one in which i did.
now after i downloaded it i placed it in (Android Data com.eset.ems2 ) folder
any way after doing so the antivirus keep tell me the the downloaded file was a molar so i ignore it and poof that wen the phone start acting up things starts to force close and the phone start to restart by it self i have tried
uninstall an remove the program
factory reset the pone and the virus was still there thats wen the idea to flash a different single sim stock ROM
not realizing i should have backed up the original ROM
ive download a stock rom from (xda) did 3 times yep 3 times and a triple sim stock ROM also
after using the sptool to flash on the stock rom
Firmware (Acer_AV0K0_E39_1.011.00_EMEA_GEN1S )when it was done i unplug the usb and turnd on the phone it took awhile then i saw the welcome screen i sow so glad to see it until i touched the screen trying to press next nothing happen
1. the touch was not working at all but it detect my sim card
i flash the phone 3 times and got the same problem
i open the sp flash tool to flash (Acer_AV0K0_E39_1.019.00_EMEA_CUS1)
Saw the welcome screen and the touch was working very well after finishing the set up the phone is telling me
2. Invalid imei
3. No sim card detected in slot 123
yet the card is in the phone and wen i remove the card the phone is saying( sim1 has been changed, the phone will restart immediately)
can someone plz help me fix the issues im having
:crying::crying::crying:
kaywana said:
Im in deep problem and im unable to solve
its about my acer liquid e39 and just to make it clear im a nood to the whole flashing of android
now wat happen i have a habit to always keeping the settings( unknown sources ) on
the the other day i download a antivirus for my phone named (e mobile security and antivirus) from a torrent site
it worked grate but then i realized the the licences expired from 2014 so i decided try and download a new one
well i was hoping i could fined one in which i did.
now after i downloaded it i placed it in (Android Data com.eset.ems2 ) folder
any way after doing so the antivirus keep tell me the the downloaded file was a molar so i ignore it and poof that wen the phone start acting up things starts to force close and the phone start to restart by it self i have tried
uninstall an remove the program
factory reset the pone and the virus was still there thats wen the idea to flash a different single sim stock ROM
not realizing i should have backed up the original ROM
ive download a stock rom from (xda) did 3 times yep 3 times and a triple sim stock ROM also
after using the sptool to flash on the stock rom
Firmware (Acer_AV0K0_E39_1.011.00_EMEA_GEN1S )when it was done i unplug the usb and turnd on the phone it took awhile then i saw the welcome screen i sow so glad to see it until i touched the screen trying to press next nothing happen
1. the touch was not working at all but it detect my sim card
i flash the phone 3 times and got the same problem
i open the sp flash tool to flash (Acer_AV0K0_E39_1.019.00_EMEA_CUS1)
Saw the welcome screen and the touch was working very well after finishing the set up the phone is telling me
2. Invalid imei
3. No sim card detected in slot 123
yet the card is in the phone and wen i remove the card the phone is saying( sim1 has been changed, the phone will restart immediately)
can someone plz help me fix the issues im having
:crying::crying::crying:
Click to expand...
Click to collapse
Greetings,
You have already received a response in your previous thread here:
http://forum.xda-developers.com/general/xda-assist/acre-e39-single-sim-help-t3340091
Please do not create a thread or post more than once.
Thread closed.
I unlocked redmi note 7 pro today ran commands to install twrp recovery, however it showed your system has been destroyed when rebooted so i checked on youtube and installed orange fox recovery somehow but it showed no files in my internal storage but some weird files, so i installed pixel experience plus using sd card but when its successfully flashed when i reboot, it shows nothing (not even "redmi note 7 pro" or the google G logo) but again reboots to recovery
Please help me to rectify this messup, (IT WAS MY FRIENDS PHONE AND KILLS ME TO HAVE MESSED UP IN SOMEONE ELSE'S PHONE)
Please help guys, i have only a day to fix it, i already have a custom rom phobia now. Thanks in advance
Same here bro, I was using Pixel Experience with twrp3.4.0 for violet and when I did a factory reset on the phone the phone booted into the twrp and I wiped the phone and now its only booting into the twrp.
Now I have tried to flash the twrp again from fastboot and now the phone is stuck on the Redmi by Xiaomi with unlocked at the bottom for the past 10~15 mins.
I am also attaching my logcat for reference. I have tried to reflash the twrp but even that did not seem to help.
Dont worry bro!! Your device will definitely work my insta id is mr._.asur contact me on this...if you want to resolve it!!!
You guys didn't even format data. Next time follow step by step flash guide for that particular rom or whatever you are flashing
same problem please help me bro .even fastboot also not detecting
[email protected] said:
Dont worry bro!! Your device will definitely work my insta id is mr._.asur contact me on this...if you want to resolve it!!!
Click to expand...
Click to collapse
please help me same issue