I softbricked my Kyocera while updating to new firmware in which the phone died and started to flash the "powered by android" screen. It can't boot beyond that point and I have used the revovery tool to wipe all data and clear the cache partition but it did not fix it. In new to android and I was only using the phone as a music player and did not root it or even attempt to.
franovi343 said:
I softbricked my Kyocera while updating to new firmware in which the phone died and started to flash the "powered by android" screen. It can't boot beyond that point and I have used the revovery tool to wipe all data and clear the cache partition but it did not fix it. In new to android and I was only using the phone as a music player and did not root it or even attempt to.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
Related
Hey xda i have recently started some tricks with an android device I mainly dont do anything on my main phone thats why I have bought HP 7 plus 1301 for experience but whenever I root it(different methods) and reboot it stucks on the boot logo and does not even reach boot animation for about 3 hours and factory resets after that. Is there any solution for that?if info is required then I will post it
Anonymous222 said:
Hey xda i have recently started some tricks with an android device I mainly dont do anything on my main phone thats why I have bought HP 7 plus 1301 for experience but whenever I root it(different methods) and reboot it stucks on the boot logo and does not even reach boot animation for about 3 hours and factory resets after that. Is there any solution for that?if info is required then I will post it
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.You can post your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you
___
v7
XDA Assist
Hello to everybody,
I have a Samsung Galaxy Trend GT-S7560 with Android 4.0.4.
I was trying to update to Android 4.4.4 but when flashing recovery
using heimdall (I only have linux) something went wrong and now
my phone doesn't start at all...
I get the message just after starting that says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So the only thing I can do is go in download mode.
Now I tried to put the system functioning again following the following thread:
http://forum.xda-developers.com/showthread.php?t=878686
But the thing is when downloading the firmware of my phone from the official samsung website
Most of the files described in the first post were not present...(for example factoryfs.rfs is missing)
So actually I have no idea what else to do...
If anyone could help I'd be veeery grateful to have my phone back running
Maybe putting back the android 4.0.4 or directly 4.4.4.
Thank you a loooooot!
Cheers!
Juan
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.You can post your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you
___
v7
XDA Assist
I humbly implore the help of the android gods, for I am at my wits end!
For some background, I love this ZTE Z5s it's fast and snappy and well made. Recently I started playing around with google cardboard, got a VR box and I was very impressed. Especially with the cedar point roller coaster VR ride! Some of the other VR apps didnt work correctly, seemingly because I was on android 4.2 (On my Huawei P8 with android 4.4.2 it worked fine)
And so, I was on a mission to upgrade firmware to 4.4.2. seemingly a trivial task, since the 4.4.2 firmware was an official factory release.
When booting into recovery mode CWM 6.0.4.5 (which was in chinese btw. Yeah, a lot of fun to decipher. used English version as guide) I located the 'install from zip' option and pointed it to the new firmware. To my dismay, the update failed. The translation saying something like CWM 6.0.4.5 cant upgrade to 4.4.2 and i need a newer recovery manager.
And then... the recovery loop started. It doesnt boot into anything, shows the nubia symbol and goes straight to recovery.
I have since tried a factory reset, but to no avail. Same recovery loop.
Is anyone able to assist on this? Or have I just gained myself a shiny doorstop? lol
Is this the correct space to post this? Apologies if not.
Also, I have installed android SDK and device is not listed when I run the 'adb_devices' command. Was thinking I could put a 4.2 firmware back on the device, and run CWM again using this.
Ms_HBomb said:
I humbly implore the help of the android gods, for I am at my wits end!
For some background, I love this ZTE Z5s it's fast and snappy and well made. Recently I started playing around with google cardboard, got a VR box and I was very impressed. Especially with the cedar point roller coaster VR ride! Some of the other VR apps didnt work correctly, seemingly because I was on android 4.2 (On my Huawei P8 with android 4.4.2 it worked fine)
And so, I was on a mission to upgrade firmware to 4.4.2. seemingly a trivial task, since the 4.4.2 firmware was an official factory release.
When booting into recovery mode CWM 6.0.4.5 (which was in chinese btw. Yeah, a lot of fun to decipher. used English version as guide) I located the 'install from zip' option and pointed it to the new firmware. To my dismay, the update failed. The translation saying something like CWM 6.0.4.5 cant upgrade to 4.4.2 and i need a newer recovery manager.
And then... the recovery loop started. It doesnt boot into anything, shows the nubia symbol and goes straight to recovery.
I have since tried a factory reset, but to no avail. Same recovery loop.
Is anyone able to assist on this? Or have I just gained myself a shiny doorstop? lol
Is this the correct space to post this? Apologies if not.
Also, I have installed android SDK and device is not listed when I run the 'adb_devices' command. Was thinking I could put a 4.2 firmware back on the device, and run CWM again using this.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
v7 said:
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
Click to expand...
Click to collapse
Thanks V7! Will check it out. Hopefully I get to mess around with cardboard again soon! That is AWESOME!
Hello everyone,
My cousin came from france to visit us and he brought my little Brother a tablet he promised the tablet is a Logicom s732, now there is a problem with it it doesn't seems to boot into android it's only boots in recovery mode, what's funny is that it boots in recovery alone when i try to factory reset it finishes everything and still the same thing happens, when i try to wipe cache the tablet restarts, now i can't even flash the ROM because Windows won't seems to recognize the tablet i hear the sound that i connected the tablet 20 times then Windows notification comes that it does not recognize the tablet 20 times, i need help with this since my little Brother is really sad i can't seem to find a solution. Please guys if someone can help!
.reported said:
Hello everyone,
My cousin came from france to visit us and he brought my little Brother a tablet he promised the tablet is a Logicom s732, now there is a problem with it it doesn't seems to boot into android it's only boots in recovery mode, what's funny is that it boots in recovery alone when i try to factory reset it finishes everything and still the same thing happens, when i try to wipe cache the tablet restarts, now i can't even flash the ROM because Windows won't seems to recognize the tablet i hear the sound that i connected the tablet 20 times then Windows notification comes that it does not recognize the tablet 20 times, i need help with this since my little Brother is really sad i can't seem to find a solution. Please guys if someone can help!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
__
v7
XDA Assist
v7 said:
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
__
v7
XDA Assist
Click to expand...
Click to collapse
Thank you so much, i've managed to make the usb port work and have flashed the ROM on my tablet and it's working now. Still thank you so much
Hello friends,
I need your help. I am having a meizu m2 (mini) running on android 5.1.1 with flyme 5.1.6.OG which I have rooted yesterday with kingoroot desktop app and after that I have edited the file build.prop with Es file explorer (as rooted) by changing "qemu.hw.mainkeys=1" to "qemu.hw.mainkeys=0" to introduce softkeys, but after rebooting, the fone stuck in the bootloop as shown only flyme icon revolving in the screen. Then I tried to flash stock of flyme 4.5.4I by pressing volume up+power, connecting to the computer through recovery, it was also successful;, but again stuck in the bootloop. Please help, tell me a way to get the phone back to normal. I don't have the original untouched buil.prop file. Please show me a way to get the phone back to normal.
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
__
v7
XDA Assist