I have a zenfone C, it is bricked now. When I turn it on, it shows the Asus logo, then bootloops after a minute interval. When I connect it to pc, the charging icon appears. I cannot enter into recovery mode, and I cant flash a new rom because it cannot be detected by pc. I have intalled isoc, including usb drivers but still cannot detect. This fone has no warranty anymore.
XDA Visitor said:
I have a zenfone C, it is bricked now. When I turn it on, it shows the Asus logo, then bootloops after a minute interval. When I connect it to pc, the charging icon appears. I cannot enter into recovery mode, and I cant flash a new rom because it cannot be detected by pc. I have intalled isoc, including usb drivers but still cannot detect. This fone has no warranty anymore.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Since you cannot get the device to recognize on a PC, I doubt this will work. From my standpoint, it is your last hope:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > Asus Zenfone C bootloop
If you run into problems, can reply in that thread as well (once you have an XDA account).
Hope this helps, and good luck!
Related
Hello,
First of all I'm French so sorry for my bad English.
I just purchased a Zenfone 2 Unlocked (Model ZE551ML), and for some reason i thought it was a good idea to root my system.After rooting I disabled USB debugging and yesterday I decided to update my system software to a newer version without knowing at the time that it wasn't a good idea with a rooted cellphone. Now the android phone is stuck in boot-loop and after factory reset/wipe cache it is still doing the same-thing. After searching the web, I concluded that flashing the software using adb software was the best solution but I soon after realized USB Debugging was disabled and after checking with adb I get this message when I try to use command ''adb sideload file.zip (where file.zip is the file name of the Asus firmware)''
Message :
C:/adb> adb sideload system.zip
loading: 'system.zip* deamon not running. starting it now on port 5037*
* deamon started successfully*
error: device not found
Just to make sure everyone knows, the zenfone was plugged via USB and I was in ''apply update from ADB'' in the recovery mode.
How do I proceed ? Is Flashing my zenfone 2 the best option for my situation? Is it possible without USB Debugging Enabled?
Hi there,
You'd be best served asking for help from the experts who own your device here:
ZenFone 2 Q&A, Help & Troubleshooting
Good luck
I installed coustom rom.
I m in bootloader loop and samsung logo is blinking.
I cant connect usb cable to and due to which i cant even reset nd reinstall my tab.
I have samsung usb drivers install with kies on lappy.
Nd my tab can be charged with the help of same cable
XDA Visitor said:
I installed coustom rom.
I m in bootloader loop and samsung logo is blinking.
I cant connect usb cable to and due to which i cant even reset nd reinstall my tab.
I have samsung usb drivers install with kies on lappy.
Nd my tab can be charged with the help of same cable
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Kies tends to get in the way of Odin when attempting download mode to restore. Thus, make sure that Kies is closed, then try the method to get into download mode.
If you run into any further difficulties, please create an account, so you can post in other forums. Then, check out the > Samsung Galaxy Tab 2 > Galaxy Tab 2 Q&A, Help & Troubleshooting forum. Your device experts can be found here.
Hope this helps, and good luck!
Hi,
My phone is bricked (totally dead+usb not detected+doesn't boot at all) because i formatted it without installing the new rom. (sp tool was taking too much time and I had to stop the process)
now the phone does not have a rom installed and I cannot boot to recovery mode aswell. everything is gone !!
and the biggest problem is that my pc has not been detecting the phone while it's plugged in via usb cable since i formatted it. :crying:
maybe, can i just install the rom in sdcard then i boot from it?
my phone is versus pioneer p1 ( a.k.a gionee pioneer p1)
Thanks.
Hello,
Welcome to XDA.
If your device doesn't charge, has no LED when plugged in, won't boot to any mode, no vibration when press power and PC gives no sound when device is connected then you are probably hard bricked, if that is the case you'll have to take it to a repair shop, there is a good chance they won't be able to fix it.
Try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help, good luck.
Helo guys,
I tryed to change my smashed screen and with the new one it turned off after 20 seconds. I tryed to go from 4.4 to 4.2 in order to repair the bug.
I pu the phone in download mode and charged the root file bu after a time it disconect from usb by mistake.
Now the phone doesn't starts at all.
When I contect it to the PC throug usb cable the PC makes a sound as it detects the phone, but the phone its dead. Nothing works.
Odin dosen't recognized.
Is it dead? Can I do anything to make it work?
Thanks!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below
http://forum.xda-developers.com/galaxy-mega/help
The experts there may be able to help.
Register an XDA account to post and reply in the forums.
Hi,
My phone suddenly gets dead/bricked & now it's showing only red light whenever I'm trying to charge the phone.
After searching in forums I goto to know that I need to flash my phone but when I connect it to pc nothing is showing & I think the phone is not gets connected ( in windows 10 ). I have installed the required USB drivers but still, it's not connecting.
1. I think I need to enable developers mode & also USB debugging but my phone is dead so I can't enable it from the phone . Is there any method to do the same from the PC? if yes it would be great if I get the details of the same.
2. Also, After phone is connected to the PC I need to Root the phone? if yes, How to do that?
I know the further procedure on how to flash mobile from SP flash tool by uploading scatter file & I want to know about the above 2 queries.
Any help will be appreciated.
Thanks.