I have a 703L 16Gb on B012 and installed X2-B015-KangVIP ROM through TWRP.
All installed fine and I tried the ROM for a while.
Anyway there were too many Chinese Apps so I restored my TWRP backup and rebooted.
Now it continually boots into TWRP and won't even power off. I tried again to restore it, and earlier backups, but they all just boot into TWRP continually.
Any suggestions? I tried using a stock Recovery but the phone wont even boot into that, so reverted back to TWRP.
Daver69 said:
I have a 703L 16Gb on B012 and installed X2-B015-KangVIP ROM through TWRP.
All installed fine and I tried the ROM for a while.
Anyway there were too many Chinese Apps so I restored my TWRP backup and rebooted.
Now it continually boots into TWRP and won't even power off. I tried again to restore it, and earlier backups, but they all just boot into TWRP continually.
Any suggestions? I tried using a stock Recovery but the phone wont even boot into that, so reverted back to TWRP.
Click to expand...
Click to collapse
You will back to Stock B112 with your TWRP Backup?
I think you must be flash the Boot img via fastboot,i think this fix the Problem.
Yes that worked thanks.
Related
Ok this is giving me cancer! I'm flashing TWRP 2.8.1.0 and can enter this recovery immediately after flashing it. But, as soon as I reboot the phone, or boot the OS and then reboot into recovery, the recovery is restored to stock. I've flashed recoveries an unhealthy amount of times on several different devices but I've never seen this behavior before. I'm on stock Android 5.0 LRX21O.
I had this, but i reinstalled, but now it is working just fine, just needed to reinstall it
gefilus said:
I had this, but i reinstalled, but now it is working just fine, just needed to reinstall it
Click to expand...
Click to collapse
Reinstalling the recovery?
Yup, just flashed it again, same image
Look here:
http://forum.xda-developers.com/google-nexus-5/general/warning-lollipop-aosp-roms-broken-t2930512
I recently upgraded from stock opo cyanogen to the cyanogen nightlies. now whenever i go back to TWRP to make a backup, it breaks my os and i get stuck in a bootloop. i have to factory reset my phone and set everything up again, and all of the backups are just bootloops. i already tried re-flashing TWRP and cyanogen, both through the TWRP manager and through the fastboot flash recovery command. if anyone has a solution it would be much appreciated.
ItsDeadEnd said:
I recently upgraded from stock opo cyanogen to the cyanogen nightlies. now whenever i go back to TWRP to make a backup, it breaks my os and i get stuck in a bootloop. i have to factory reset my phone and set everything up again, and all of the backups are just bootloops. i already tried re-flashing TWRP and cyanogen, both through the TWRP manager and through the fastboot flash recovery command. if anyone has a solution it would be much appreciated.
Click to expand...
Click to collapse
Are you using the latest version of TWRP?
fixed it
Shankar9822 said:
Are you using the latest version of TWRP?
Click to expand...
Click to collapse
it turns out it had nothing to do with twrp, it was a corrupted verion of gapps.
i just reflashed everything. (cm12, new gapps download, and supersu)
Hi.
Today I wanted to upgrade from CM11 to CM12.1, but I had to upgrade the bootloader first. It all worked and I'm now on bootloader version 41.18.
When I flashed the ROM it flashed in 20 seconds from an USB stick. It seemed a little to fast. When I rebooted it worked fine and I was on Android 5.1.1, but after installing SuperSU and rebooting I stuck into a bootloop.
I'm now in a bootloop and when I try to enter the recovery the TWRP splash screen comes up, but then it goes into the bootloop again.
I have the XT1032 and my TWRP version is 2.8.6.0 and I have a TWRP backup from CM11
If someone could push me in the right direction how I can access TWRP then that would be great.
Thanks in advance.
Quick update
The phone now booted into TWRP, but when I do a restore to my backup the phone goes back to the bootloop. The same happens when I try to wipe.
zomgwalrus said:
The phone now booted into TWRP, but when I do a restore to my backup the phone goes back to the bootloop. The same happens when I try to wipe.
Click to expand...
Click to collapse
I have the same issue, cannot get into twrp, how did you managed to boot into TWRP?
i had same issues in my moto g xt1032 i tried below CM12.1 works without issues.
go recovery --- wipe---- format data
and try step install steps like install rom zip & gapps
Ok, first what do you use to flash recovery, can you reflash recovery with the lastest TWRP version (2.8.7.0) and post back the logs here? Then tell me if you can get into recovery
Its common place that twrp cause bootloop with backups.
No problem try to
Install new twrp using fastboot mode it will be work fine
Hi all,
Recently I updated my Nexus 5 from Lollipop to Marshmallow 6.0.1 (MMB29Q) - latest build.
everything stock works fine but, once I flash a customer recovery, in my case TWRP it stops working...I get either a startup loop or TWRP gets erased by stock recovery.
I tried various steps ...
flashed TWRP 2.8.7.1 - rebooted to boot loader was able to get into TWRP but, once I reboot system, everything works but TWRP is gone/erased and replaced by stock recovery?
Flash TWRP 2.8.7.1, then flash latest TWRP 3.0, reboot to boot loader and can get into TWRP but once i reboot into system, I am stuck on the initial boot loop.
I have to start from scratch of flashing system and boot etc to get past the loop and it still replaces TWRP with stock recovery.
I can always get into Fastboot but when I go to recovery it seems its being replaced by stock recovery.
anyone experiencing this issue? thanks for your help.
I guess I am doing something stupid but, not sure what...and thanks for your help
If you give more detail on the steps you are taking it will be easier for someone to help. Also, have you tried doing a factory reset when it bootloops?
thanks for the response..here are the details..
I had Lollipop with TWRP 2.8.7.1
yesterday, I downloaded latest build from android site...extracted all files....booted into bootloader and flashed all files..
rebooted - Marshmallow works perfectly...offcourse it not rooted yet or its locedback due to this flash
Scenario:1
So downloaded TWRP 2.8.7.1 and flashed it as recovery, no errors nothing...i rebooted to bootloader and went to recovery to confirm TWRP is there
I rebooted the system - TWRP gives option to root which I said yes so its rooted. I reboot system, this goes into bootloop - I wait for say 5-10 min in this loop mode and I see that adb can recognize the device but nothing else....its stuck in loop
when I force shut down by holding power button for few sec - and go back bootloader/recovery - TWRP is still there
***note*** I did factory wipe in TWRP but that did not fix above condition.
Scenario2:
exact same steps but after I flashed twrp2.8.7.1, I rebooted bootloader and flashed twrp 3.0 as well confirmed twrp 3.0 is flashed and rebooted system - phone start normally no issues - when I restart to bootloader - no TWRP exists, its replaced by stock recovery
Scenario 2, I tried couple of other ways and still the same thing happens - twrp 3.0 get erased.
not sure what I am doing wrong but TWRP doesn't stick
since this is my active device - i flash system.img and boot.img to get the phone to working condition
thanks for your help
Try flashing the latest supersu to get root.
audit13 said:
Try flashing the latest supersu to get root.
Click to expand...
Click to collapse
That did the trick.....thank you very much. I was using older version of supersu thinking it was latest.....I downloaded V2.65 and installed it and that fixed all my troubles..
muchas gracias
Is it possible to instal the compatible cwm recovery at huawei P8max and how? I tried different versions using FlashFire and one apk with loader.zip, but without success. After rebooting recovery, i got some strange rescue screen with 2 faults: 11. recovery and 2: boot (update your system).
Unlocked Bootloader?
Why not use the working TWRP that existing?
same problem after b210 from dload on sd card it seems emui 4 does not support thre local cwm
@Hirs
I wrote already that i have a lot of problems with "working TWRP". When i flashed it the first time, it was ok, but later, rebooting sytem was not working, every time i was reverted to twrp screen. I flashed the stock recovery, then twrp again, the same situation.
drpainster said:
@Hirs
I wrote already that i have a lot of problems with "working TWRP". When i flashed it the first time, it was ok, but later, rebooting sytem was not working, every time i was reverted to twrp screen. I flashed the stock recovery, then twrp again, the same situation.
Click to expand...
Click to collapse
Thats normal that you cant reboot to system sometimes with a installed TWRP, then you flash stock back and reboot.
You can easily flash TWRP do the things you want and then reboot to bootloader flash stock and use the phone.
I dont think there is a CWM especially for the P8Max, but you can try the P8 one.