DISCLAIMER
You need to have an unlocked bootloader to use this ROM & kernel. Also I or any contributor in the software DOES NOT take responsibility of damages caused to your phone due to this ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Copy ROM zip and gapps zip to sdcard
2. Flash any kernel which has recovery (Use the boot.img in this ROM - It has TWRP)
3. Reboot device and go to recovery by pressing Vol-UP when LED is pink
4. If coming from 5.1 or below ROM wipedata/factory reset your phone
5. Flash ROM zip
6. Flash OpenGapps ARM zip
7. Reboot and enjoy.
Official NIghtlies (automatically built every 4-5 days) :
Basketbuild
Unofficial Test Builds (will contain experimental changes for testing) :
Mirror : Uploaded.to
Mirror : self hosted
Gapps :
http://opengapps.org
We spend countless of hours doing this for next to nothing. Posts, views, and donations encourage me, and everyone else who helps out.
Donate to AOKP
Every donation is cherished and loved.
If you'd like to help contribute by writing code, feel free to stop by IRC and talk to us!
Latest merges on Gerrit
http://gerrit.aokp.co/#/q/sony+status:merged,n,z
Check out the ROM source on github. Open source, in the spirit of community kangage.
CREDITS
Thanks to all device maintainers of Sony devices on CM/AOKP/Omni/PA/PAC as everyone working on the device helps each other into making better ROMs.
Also thanks to Sony Mobile for being so helpful to developers.
XDA:DevDB Information
AOKP MM 6.0.1 unofficial + nightly + official, ROM for the Sony Xperia Z1 Compact
Contributors
championswimmer, championswimmer
Source Code: http://github.com/AOKP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOKP
Version Information
Status: Alpha
Created 2016-02-09
Last Updated 2016-03-10
Yes!!! Finally we got fully working marshmallow!!
Wysłane z mojego MID701P przy użyciu Tapatalka
CmDaRkShAdOw said:
Yes!!! Finally we got fully working marshmallow!!
Wysłane z mojego MID701P przy użyciu Tapatalka
Click to expand...
Click to collapse
Did you just install it
So ur telling it's fully working?
downloading.....
and flashing....can t get in recovery with the kernel in the zip.
i tried with another kernel with TWRP,flashed rom and gapps and rom did not boot,only coloured vertical lines on display,after 10 minutes PC recognized the phone but it did not boot finally.
i come back with results soon
EDIT:would be nice but unfortunately won t boot one way or another,we will be more patient for next build,big thanks to devs
championswimmer said:
Thanks to all device maintainers of Sony devices on CM/AOKP/Omni/PA/PAC as EVERYONE WORKING on the device helps each other into making better ROMs.
Also thanks to Sony Mobile for being so helpful to developers.
Click to expand...
Click to collapse
I understood, that this text tells that all working.. And i haven't tested yet because my z1c is in w-support
Wysłane z mojego MID701P przy użyciu Tapatalka
CmDaRkShAdOw said:
I understood, that this text tells that all working.. And i haven't tested yet because my z1c is in w-support
Wysłane z mojego MID701P przy użyciu Tapatalka
Click to expand...
Click to collapse
You get it wrong. He thanks all of contributors and other devs for help, as everyone work together to make roms for our phone.
As of now, it looks like its alpha build or even pre-alpha.
If you want to test the marshmallow on z1c you can install the vanir newest build, but the sim card isn't working.
Maybe someone knows if FXP or Vanir will make new build as of now they aren't update for a while.
Looks good. For me, no WiFi, and mobile network in and out. Still the best yet. Thanks
Seems like recovery doesn't show ext sdcard when on this rom, so can't restore backup on ext card, unless you flash a different rom, then reboot recovery...
levone1 said:
Seems like recovery doesn't show ext sdcard when on this rom, so can't restore backup on ext card, unless you flash a different rom, then reboot recovery...
Click to expand...
Click to collapse
Definitively not rom-related. Are you using real recovery (one can boot directly into recovery from powered-off device without system/boot.img installed, that is)?
Ænimal said:
Definitively not rom-related. Are you using real recovery (one can boot directly into recovery from powered-off device, that is)?
Click to expand...
Click to collapse
Yes. I'll check it again, (I'm currently back on 5.1 rom), but it was pretty clear - when I booted recovery from AOKP mm rom, there was no sign of micro SD card, either in 'restore', 'file manager', or 'mount'. Then, I flashed RR 5.1 rom, rebooted recovery, and it was back.
levone1 said:
Yes. I'll check it again, (I'm currently back on 5.1 rom), but it was pretty clear - when I booted recovery from AOKP mm rom, there was no sign of micro SD card, either in 'restore', 'file manager', or 'mount'. Then, I flashed RR 5.1 rom, rebooted recovery, and it was back.
Click to expand...
Click to collapse
Because I could not reproduce this, recovery mounts ext sd just fine, no matter which rom or no rom at all..
Ænimal said:
Because I could not reproduce this, recovery mounts ext sd just fine, no matter which rom or no rom at all..
Click to expand...
Click to collapse
Tested more, and it's fine if booting into real recovery, but no external SD card in recovery if using old recovery method.
Sim and camera still works?
Wysłane z mojego MID701P przy użyciu Tapatalka
Sim works, camera and WiFi not
CmDaRkShAdOw said:
Sim and camera still works?
Wysłane z mojego MID701P przy użyciu Tapatalka
Click to expand...
Click to collapse
I got a good mobile data connection for about 15 minutes, then just cut out and never came back. Same thing twice on fresh installs. Maybe there's a manual tweak that can reconnect it.
Wifi... In other rom sim not working, in other cam and sim not working, and here wifi and cam not working.. Waiting for release with wifi fixed...
Wysłane z mojego MID701P przy użyciu Tapatalka
Hello
When i will flash this Rom, must i Boot the Boot.img, or it is enough to flash this Rom in my twrp recovery.
Now i have cm12.1 on my device
Jesusnagler said:
Hello
When i will flash this Rom, must i Boot the Boot.img, or it is enough to flash this Rom in my twrp recovery.
Now i have cm12.1 in my device
Click to expand...
Click to collapse
quote from OP:
2. Flash any kernel which has recovery (Use the boot.img in this ROM - It has TWRP)
it doesn t matter if you flash it with your TWRP but better use the boot.img in the rom as OP suggests so.
Yeah so camera is not working yet... There is no MM rom other than this for our device, so it would be awesome if you guys could fix these issues. Thanks for your hard work!
Twrp 3.0 dont find my SD card.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the unofficial CyanogenMod 10.2 nightlies
The build start time is at 03:01 UTC every sunday night and should be uploaded soon after. If at anytime the builds are not there, then there was a problem building the ROM, and we will have a look at it ASAP.
These builds are compiled from the latest CyanogenMod repos and device repos on device, kernel and vendor files.
Furthermore these builds are multiDPI, i.e. you can run the rom at any dpi between 160 and 240 while maintaining hi-res assets.
Initial install
Make sure you are updated to stock LG ICS update (v20d) prior flashing the first time.
And remember to wipe data/cache
(These steps need only to be done once. Later updates can be just flashed over an existing installation without the need of a wipe)
You need to have a custom recovery installed in order to flash these builds;
e.g. http://forum.xda-developers.com/showthread.php?t=1859662
And as always: I take no responsibility whatsoever for raging, screaming, crying, frustration, failing, confusion, dead kittens, etc.
Download builds
Download Google Apps
Changes
Upstream changes
Devicetree commits
Kernel commits
Tip: If you want to have your density settings persist over updates and don't want to edit build.prop with every update, use local.prop.
create a file named local.prop in your /data root (i.e. /data/local.prop) with the following contents (overrides ro.sf.lcd_density in build.prop):
Code:
qemu.sf.lcd_density=160
Click to expand...
Click to collapse
Thanks/Credits
Click to expand...
Click to collapse
Won-Kyu Park - for his awesome work with all LG phones
Ricardo Cerqueira - for his work on the LG Star devices (mainly P990) and the P920. This made some of the porting a tad easier for me glancing at his changes.
cyanogen - For starting this great project
Google - This wouldn't have happened without the releases of Android from you
IRC channel
Click to expand...
Click to collapse
Visit us in #cyanogenmod-dev on freenode
reserved for future use
thanks milaq, you are god
cgmastertecnology said:
thanks milaq, you are god
Click to expand...
Click to collapse
Lol. Thanked the wrong guy. Anyhow, enjoy it.
@milaq, I'm not really a member of this forum. I only come here to flash updates on my mom's phone. From what I saw I thought you had stopped developing for prada. Well, thanks for the work.
@ milaq
That's great! We almost thought you abandoned us but hell I found out that you were still working on your exnet.me! Question, is there a work in progress for CM11 Kitkat® 4.4 version?
Sent from LG Prada 3.0 P940 CM10.1
My Colorscreen
[url="http://forum.xda-developers.com/showthread.php?p=42755601]Prada Optimus Theme V2[/url]
I cant download files from exnet on my p940. Ehh i need turn on my computer
Fortidude said:
I cant download files from exnet on my p940. Ehh i need turn on my computer
Click to expand...
Click to collapse
Yes, unfortunately it doesn't work on stock stock browser. I used Chrome to download it via phone.
Sent from LG Prada 3.0 P940 CM10.1
My Colorscreen
[url="http://forum.xda-developers.com/showthread.php?p=42755601]Prada Optimus Theme V2[/url]
I using delphin browse and it doesnt work
So far it's brilliant! A great way to start CM11! The only thing I noticed is the AOSP Keyboard FC's and no option to turn off the soft key button lights wherein it was included on Prada settings.
Sent from LG Prada 3.0 P940 CM10.1
My Colorscreen
[url="http://forum.xda-developers.com/showthread.php?p=42755601]Prada Optimus Theme V2[/url]
is necessary a wipe data/cache or i can install it like a normal rom update ??
are there critical bugs?
No crit bugs atm. You should do full wipe
Wysłane z mojego LG-P940 przy użyciu Tapatalka
edit:
milaq will you develop 4.4?
new rom available (25nov)
try it with gapps and post a report
I did it a few hours ago. Working very well
Wysłane z mojego LG-P940 przy użyciu Tapatalka
26nov ROM installed.... great!!!
Ps: some touch problems (scrolling photo gallery), apparently high battery usage
These problems arent touch me
Wysłane z mojego LG-P940 przy użyciu Tapatalka
in silent mode the phone continues to play sound notifications
Its working on my device. No problems here.
Wysłane z mojego LG-P940 przy użyciu Tapatalka
mms not working. I tested config from my operator, resets etc. Nothink work.
Plz give me other link of this rom , i cant any way dl this rom .
So, I created a nice boot animation in Windows BIOS style, using LorDestinY's tutorial.
The FPS equals almost exactly the boot up time of the device, so no big delay.
Images are contained in multiple folders, so no black screen, and have the size of 720x1080 for the Z1C model.
The information used for the lines are as real as it goes, and is based on the D5503 model.
Have fun!
With Android logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Without Android logo
Z1Cv4.0 [KK]: Download at Google Drive - with Android logo, flashable .zip
Download at Google Drive - without Android logo, flashable .zip
Z1Cv5.2 [LP]: Download at Google Drive - with Android logo. flashable .zip
Download at Google Drive - without Android logo. flashable .zip
Please comment if you find any issues, and inform me if you find a better FPS value.
For any help, refer to the original thread for Z1: XDA
If you like it, please press that 'Thanks' button!
Please re-download, there was a minor update
I have chosen ver 157 720x1280 and I have only android sign and that's all no bios animation i replaced my earlier bootanimation.zip and set perm but only android sign phone turn up normaly
Wysłane z mojego D5503 przy użyciu Tapatalka
mosespl said:
I have chosen ver 157 720x1280 and I have only android sign and that's all no bios animation i replaced my earlier bootanimation.zip and set perm but only android sign phone turn up normaly
Wysłane z mojego D5503 przy użyciu Tapatalka
Click to expand...
Click to collapse
Hav you tried the other version? Maybe you have a different screen resolution, can you check back your original bootanimation.zip? And by saying "Android sign" you mean the last part of this mod?
Has anoyne else this problem?
NFS_FM said:
Hav you tried the other version? Maybe you have a different screen resolution, can you check back your original bootanimation.zip? And by saying "Android sign" you mean the last part of this mod?
Has anoyne else this problem?
Click to expand...
Click to collapse
just tried it (the .157 720x version) and all works just fine. all animation is shown as it should. good work my friend NFS.:good: @mosespl did you rename the downloaded file?because if you don't rename it to "bootanimation.zip" and set right permissions,i think that no animation will be shown.
Guys false alarm. I checked again and I don't know why permission didn't set properly but now I changed it again and everything works fine. Good job
Wysłane z mojego D5503 przy użyciu Tapatalka
mosespl said:
Guys false alarm. I checked again and I don't know why permission didn't set properly but now I changed it again and everything works fine. Good job
Wysłane z mojego D5503 przy użyciu Tapatalka
Click to expand...
Click to collapse
OK, so there isn't any problem hopefully.
Thank you all for the support, I hope no other problem pops up, but if there is any, please say it right away!
This works well on my Z3C Z3 Compact (I used the "Z1Cv3.5 [.157], (720x1280)"). Though it boots a bit too fast to see it all... still neat.
Thanks very much
LaZiODROID said:
This works well on my Z3C Z3 Compact (I used the "Z1Cv3.5 [.157], (720x1280)"). Though it boots a bit too fast to see it all... still neat.
Thanks very much
Click to expand...
Click to collapse
Well, if you wait some time, less than a week, I will prepare an appropriate version for Z3C!
works like a charm....
Works good..!
It's so nice..!!
Thanks!
Hi, tried both resolutions of. 157, doesn't work, only android logo shows up. Is there anything to do with bootloader, locked, unlocked? Permissions I set up as for native bootanimation. rw-r--r--. What could be wrong? Any suggestions? Thanks
Or maybe the way it's been pushed to the device? I just used file explorer.
kokkss said:
Hi, tried both resolutions of. 157, doesn't work, only android logo shows up. Is there anything to do with bootloader, locked, unlocked? Permissions I set up as for native bootanimation. rw-r--r--. What could be wrong? Any suggestions? Thanks
Or maybe the way it's been pushed to the device? I just used file explorer.
Click to expand...
Click to collapse
I had same situation. Check again permissions I set up permissions but after that it won't change so I set it again and after that it works so check again permissions
Wysłane z mojego D5503 przy użyciu Tapatalka
kokkss said:
Hi, tried both resolutions of. 157, doesn't work, only android logo shows up. Is there anything to do with bootloader, locked, unlocked? Permissions I set up as for native bootanimation. rw-r--r--. What could be wrong? Any suggestions? Thanks
Or maybe the way it's been pushed to the device? I just used file explorer.
Click to expand...
Click to collapse
Please, check mosespl suggestion, there shouldn't be any problem with the .zip. It's not bootloader related, but the kernel should be stock-based, other kernels can change the way they handle bootanimmations.
Sorted!
NFS_FM said:
Please, check mosespl suggestion, there shouldn't be any problem with the .zip. It's not bootloader related, but the kernel should be stock-based, other kernels can change the way they handle bootanimmations.
Click to expand...
Click to collapse
mosespl said:
I had same situation. Check again permissions I set up permissions but after that it won't change so I set it again and after that it works so check again permissions
Wysłane z mojego D5503 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thanks,
now it works, problem was copying the whole archive to device, so i droped it to dropbox and afterwards direct downloaded it to device, after that it works.
Tomorrow, I will upload the final version of this boot animation, which is based on a new template, and fixes some bugs. Google Drive links, and flashable zips will be up, too.
It looks very nice
good work (once again) bro..!
But the android logo doesn't appear to my bootanimation..!! :S
pindis.gr said:
good work (once again) bro..!
But the android logo doesn't appear to my bootanimation..!! :S
Click to expand...
Click to collapse
Try changing the FPS value to 9 or 10. It just boots too fast. Please let me know if you find a better value.
Πάντως, σ' ευχαριστώ πολύ!
EDIT: Please try this and let me know if you can now see that all. Google Drive
Hi OP, the devhost links are inverted, the android logo version is actually directing to the one without. That might explain the issue mentioned above.
Thanks for your work
D5503 UB Dstriker ROM KK.157
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
I'm not responsible for bricked devices, void warranties, baterry explosion, and other things, which may do with your phone.
Installation instruction :
1. Do TA backup *
2. Unlock bootloader *
3. Download rom on your phone
4. reboot into recovery and do a full wipe
5. flash rom
6. flash gapps # (any packadge for 5.1, I using opengapps.org)
7. Reboot into fastboot and flash twrp to FOTAKernel partition # (from some code reasons kernel contain aosp recovery)
8. Reboot into system
9. Enjoy !
* If you don't do it yet
# optional
Download :
http://d-h.st/users/AndropaX/?fld_id=46872#files
Changelog:
Settings > about phone > changelog
Screenshots:
See screenshots tab
Kernel source :
https://github.com/CyanogenMod/android_kernel_sony_msm8974/tree/cm-12.1
XDA:DevDB Information
[Unofficial][5.1.1]Euphoria OS 1.1 amami, ROM for the Sony Xperia Z1 Compact
Contributors
AndropaX
Source Code: https://github.com/euphoria-os-legacy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Stable Version: 1.1
Stable Release Date: 2016-01-31
Created 2015-08-28
Last Updated 2016-02-01
Something new, thanks. Working great so far. Already had fota twrp, so didn't need to do that part. Fast and smooth, very nice. I'm not familiar with Euphoria; I know this is unofficial, but could you, (or someone), give us a little overview of any particular distinctions between this and any other ROM? I glanced at Euphoria G+, but didn't see a general info section, and didn't want to search the whole site.
yes i want to know something about euporia coz im not familiar also
One thing so far - battery life seems very good for a CM ROM...
Good, stable ROM.
I like it.
Keep it up
Schlengge said:
Good, stable ROM.
I like it.
Keep it up
Click to expand...
Click to collapse
hi,
battery drain?
photo quality?
these are the only two things which are important for me.
moonryder said:
hi,
battery drain?
photo quality?
these are the only two things which are important for me.
Click to expand...
Click to collapse
I would say pretty much like with every CM12 ROM.
Camera is solid, not quite as good as stock but I am happy with it.
Battery is good as long as you stick to some basic battery saving methods (Greenify, Amplify, etc.).
This ROM seems to handle deep sleep pretty well. I will report further after some days of usage.
New build available in download tab.
AndropaX said:
New build available in download tab.
Click to expand...
Click to collapse
How to update from the first version?
OTA not working for me, and flashing (wiping cache/dalvik) the newer version over the first, give fc on some apps.
What apps ?
Now i'm uploading new build after workspace clean and (probably) themes fc fix.
Wait for it, and if still gives fcs do clean flash.
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
AndropaX said:
What apps ?
Now i'm uploading new build after workspace clean and (probably) themes fc fix.
Wait for it, and if still gives fcs do clean flash.
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yes, themes app fc, I'll try the new update again
New build in download tab.
AndropaX said:
New build in download tab.
Click to expand...
Click to collapse
I have a backup so I'm just going to try it, but I was just wondering for clarity- is it probably OK to flash update over current? It seems like you were implying it in previous post, but user seemed to be having problems. Thanks
Edit - flashed update and everything good.
themes fc problem was solved. Dirty flash update should work. I haven't any problems on my honami.
where is download tab??
Here
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
:silly::silly: thank you
testing with last update, very stable rom,. Thanks for your work!
anyone got viper4android running on this rom?
AudioFX doesn't work either
EDIT:
fixed the audio problem... had to set SELinux Mode to permissive.
but now i have a new problem... no data connection, no mobile calls...
New build here because i've got errors in upload on xda file manager.
http://d-h.st/sWGs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About :
Code:
XenonHD is a custom firmware aka ROM for various Android devices. It is built from Android Open Source Project (AOSP) with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Features :
Code:
* Substartum
* OmniClocks
* Single & Dual SIM support
* SNAP Camera
* 4.1.18 kernel
* Stable
Downloads :
Code:
* [URL="https://www.androidfilehost.com/?fid=962021903579494737"]XenonHD-171125-Unofficial-eva.zip[/URL] [B][I]md5 : [/I][/B]b4ed4658901fd9b38ca8eed322bc98eb
Installations :
Code:
* In the same way like RROS Android 7.1.2 !
Issues :
Code:
* the same like RROS Android 7.1.2 !
Kernel GPLv2 compliant : android_kernel_huawei_hi3650 !
Source : XenonHD !
Thanks to XenonHD Team for the whole source !
Screenshots :
XDA:DevDB Information
XenonHD, ROM for the Huawei P9
Contributors
surdu_petru, OldDroid, XePeleato
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: RROS 7.1.2
Based On: LOS
Version Information
Status: Stable
Stable Release Date: 2017-11-25
Created 2017-11-25
Last Updated 2017-11-25
Reserved
Wow, thank you for another good rom sir
So are there any major difference between this and RROS?
RandomQuezoPH said:
Wow, thank you for another good rom sir
So are there any major difference between this and RROS?
Click to expand...
Click to collapse
Please, install it and let us to know your opinion
Hi it boot on a black screen and then nothing...
I forgot flashing vendor.zip
Its ok
Nice rom. Great work. Battery better than RR 5.8.5. All working fine. Regards
Is this rooted and has magisk?
RandomQuezoPH said:
Is this rooted and has magisk?
Click to expand...
Click to collapse
No must only flash in twrp working fine safetynet pass
every thanks
Just not turn off phone.
cannot login on alipay,it shows network error.why?
XenonHD by scaniathe.. Regards
Hi, i flashed the rom and boot phone but was just black screen, so i come back in recovery and flashed vendor too, but now phone is stuck at bootloop screen, what can i do?
pls...anmswer me fast iom with bootlooped phone in my hands and i dont know how to fix it t..t
scaniathe said:
XenonHD by scaniathe.. Regards
Click to expand...
Click to collapse
How is battery life?
Rezei said:
How is battery life?
Click to expand...
Click to collapse
i charge battery 2 time per day. Better than rr 5.8.5. Phone no hot.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
---------- Post added at 08:02 PM ---------- Previous post was at 07:56 PM ----------
greviard said:
Hi, i flashed the rom and boot phone but was just black screen, so i come back in recovery and flashed vendor too, but now phone is stuck at bootloop screen, what can i do?
pls...anmswer me fast iom with bootlooped phone in my hands and i dont know how to fix it t..t
Click to expand...
Click to collapse
When i brick my phone i always...
format data again
flash stock vendor
flash b386 or other full rom
reboot recovery
wipe cache factory reset
flash rollback
flash b136
update to last huawei nugat with ota
unlock bootloader
flash recovery twrp
and format data
few times
factory reset
flash vendor
flash rr
flash xenon
etc
Regards
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
When i brick my phone i always...
format data again
flash stock vendor
flash b386 or other full rom
reboot recovery
wipe cache factory reset
flash rollback
flash b136
update to last huawei nugat with ota
unlock bootloader
flash recovery twrp
and format data
few times
factory reset
flash vendor
flash rr
flash xenon
etc
Regards
Wysłane z mojego EVA-L09 przy użyciu Tapatalka[/QUOTE]
so, i have to install old firmware by twrp or by dload?
i tryied to dload the 1,2gb update file b393 (the one i had before starting) but it stops at 5% segnaling a problem :/
first flash nugat in twrp after reboot recovery and you are in stock recovery now you can flash rollback and b136 from dload 3button method or *#*#2846579*#*# and sd update
scaniathe said:
first flash nugat in twrp after reboot recovery and you are in stock recovery now you can flash rollback and b136 from dload 3button method or *#*#2846579*#*# and sd update
Click to expand...
Click to collapse
my question is, can i flash the stock erecovery and flash the 393? because i had it before, and i cant find the stock revocery for flash in it, just twrp here.
ps: i cant find the stock recovery file anywhere :'C
greviard said:
my question is, can i flash the stock erecovery and flash the 393? because i had it before, and i cant find the stock revocery for flash in it, just twrp here.
ps: i cant find the stock recovery file anywhere :'C
Click to expand...
Click to collapse
download b386 from magic rainbow v2 from TECALOTE OP then you flash it from twrp. Not erecovery only recovery. Do you have HUAWEI update extractor?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
---------- Post added at 09:05 PM ---------- Previous post was at 09:02 PM ----------
i don't have b393. When you flash b386 with twrp and reboot recovery first not system b386 restore automatic stock recovery
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
scaniathe said:
download b386 from magic rainbow v2 from TECALOTE OP then you flash it from twrp. Not erecovery only recovery. Do you have HUAWEI update extractor?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
---------- Post added at 09:05 PM ---------- Previous post was at 09:02 PM ----------
i don't have b393. When you flash b386 with twrp and reboot recovery first not system b386 restore automatic stock recovery
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
so for you flashing the magic rainbow b386 by TWRP simply boot p9 normally? pls i just want to have back my phone t.t
---------- Post added at 09:39 PM ---------- Previous post was at 09:25 PM ----------
ok, im downloading the files for the b386 but it's pretty weird, i tryied to flash the files of b393 in evey way, dload recovery and even with huawei extractor(taking system cust recovery ecc) but nothing.
i really hope that flashing these files from twrp will work
---------- Post added at 09:39 PM ---------- Previous post was at 09:39 PM ----------
ok, im downloading the files for the b386 but it's pretty weird, i tryied to flash the files of b393 in evey way, dload recovery and even with huawei extractor(taking system cust recovery ecc) but nothing.
i really hope that flashing these files from twrp will work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Candy 8. Built straight from source with commits from a variety of different Sources/ROMS. We wanted to give the users a fun, fully customizable ROM. We aim to add more features as this project progresses.
FEATURES
All features you get in other ROMs +
Gesture Anywhere
Smart pixels to save battery
Slim Recents
Caffine Mode
Instructions:-
- Download ROM, Gapps and bootanimation.zip (bootanimation doesn't work, need to flash another)
- Flash ROM then gapps then bootanimation.zip
- Wait for it to boot
Downloads:-
ROM:- https://drive.google.com/file/d/12hYqq9f-9f_imkEi11JjDRUFlO56gpcq/view?usp=drivesdk
Gapps :- https://cdn.dirtyunicorns.com/api/d...ioGappsMini-arm64-8.x.x-official-June2018.zip
Bootanimation:- https://drive.google.com/open?id=1tgUZhsyfBn_KHpQtEiewIC3F_nbgw5hT
Bugs:-
- After boot you'll get a message that "Your vendor image does not match with the system", just ignore it.
- Moto default gestures are missing from the settings however, chop-chop to flash and double twist to camera works (fixed now)
- For any other bug just post in this forum.
Contributors
Jayant_Deshmukh: https://forum.xda-developers.com/member.php?u=8276928
aragon12: https://forum.xda-developers.com/member.php?u=6446511
#TeamReloaded
Source Code: https://github.com/CandyRoms
Device, kernel and vendor tree: https://github.com/Alberto97
ROM OS Version: 8.x Oreo
ROM Firmware Required: latest firmware
Based On: AOSP
Created: 2018-06-14
Last Update: 2018-06-14
Use Lean Launcher to get the best experience https://play.google.com/store/apps/details?id=com.hdeva.launcher&hl=en_IN
O God man ... -- I've just finished confiuration of dotOS .
Maybe you could made - Resurection Remix 6.0 rom for addison - if you still have time and free power ?
Revert this in order for gestures to show.
DeHuMaNiZeD said:
Revert this in order for gestures to show.
Click to expand...
Click to collapse
Thanks a ton bro!
2018-06-14 New update is out fixes gesture menu
sebx_g1 said:
O God man ... -- I've just finished confiuration of dotOS .
Maybe you could made - Resurection Remix 6.0 rom for addison - if you still have time and free power ?
Click to expand...
Click to collapse
There is one already https://forum.xda-developers.com/mo...om-unofficial-ressurection-remix-6-0-t3752101
Manish355 said:
There is one already https://forum.xda-developers.com/mo...om-unofficial-ressurection-remix-6-0-t3752101
Click to expand...
Click to collapse
Yes - but treble version will not work [emoji849] no NFC, ambient display etc....
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
sebx_g1 said:
Yes - but treble version will not work [emoji849] no NFC, ambient display etc....
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
DeHuMaNiZeD already made rr 6.0 for addison, I can build but what's the point then. You can ask him to fix the bugs. He's a good guy, he can help.
Manish355 said:
DeHuMaNiZeD already made rr 6.0 for addison, I can build but what's the point then. You can ask him to fix the bugs. He's a good guy, he can help.
Click to expand...
Click to collapse
He made non treble rom, long time ago and stopped work on it few months ago. Ask him his RR was almost perfect but now is outdated.
However maybe Candy rom could replace for me RR, while now I like very much dot OS... what to choose that's a question [emoji846]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
sebx_g1 said:
He made non treble rom, long time ago and stopped work on it few months ago. Ask him.
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Hmm, I never tried a treble rom, but there are gsi images for RR you can try that but I'm not sure twrp 3.2.1.0 is compatible. Treble ROMs are not very stable and working the ass off to make treble supported ROM just to update them quickly only acceptable if you're working on an official ROM and getting paid for the same. If you want to try that bad then just flash CosmicOS, it supports treble. I don't know much about treble but treble roms are not as stable as non-treble roms.
Pixel Launcher fc on initial setup , lack of boot animation in rom ... minor errors to fix ,very fast rom. Simple ordinary interface for many will be an advance .
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
sebx_g1 said:
Pixel Launcher fc on initial setup , lack of boot animation in rom ... minor errors to fix ,very fast rom. Simple ordinary interface for many will be an advance .
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Ya, bootanimation is not working that's why I had added the link seperately. Launcher FC is just random, it never happened to me once. Let me know what minor errors you're talking about.
That are minor errors ,not very important. And this info on boot.
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
sebx_g1 said:
That are minor errors ,not very important. And this info on boot.
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Ya, it's already in the main page. I said to ignore it, just a minor issue. Tbh, I used the same sources that i used for dotOS, that means it's the ROM source bug. I am trying to fix that.
Manish355 said:
DeHuMaNiZeD already made rr 6.0 for addison, I can build but what's the point then. You can ask him to fix the bugs. He's a good guy, he can help.
Click to expand...
Click to collapse
if you fiz the bugs i pay you for the work
omar4069 said:
if you fiz the bugs i pay you for the work
Click to expand...
Click to collapse
Does RR have a inbuilt theme engine? And what are the issues with this one? https://forum.xda-developers.com/mo...om-unofficial-ressurection-remix-6-0-t3752101
Manish355 said:
Does RR have a inbuilt theme engine? And what are the issues with this one? https://forum.xda-developers.com/mo...om-unofficial-ressurection-remix-6-0-t3752101
Click to expand...
Click to collapse
no bro, only with substratum i think, but not have a inbuilt
Link dont work for me
Yero111 said:
Link dont work for me
Click to expand...
Click to collapse
it also does not work for me