Stock recovery needed for restoring stock rom? - T-Mobile Samsung Galaxy Note5

I found an ATT stock recovery, but I have not been able to find a T-Mobile stock recovery. I am trying to restore to stock using Odin with no luck. It keeps failing. I remember from other devices, you need to restore a stock recovery first to get the restore work properly.

mycomputerisjunk said:
I found an ATT stock recovery, but I have not been able to find a T-Mobile stock recovery. I am trying to restore to stock using Odin with no luck. It keeps failing. I remember from other devices, you need to restore a stock recovery first to get the restore work properly.
Click to expand...
Click to collapse
Can you post a screenshot of what ODIN says? You may just have a bad download of the firmware. The full stock firmware contains everything. You should do a full wipe though before flashing in ODIN to get rid of any remnants of fact that your device was rooted. Only thing you can't reset is the Knox counter.

Jammol said:
Can you post a screenshot of what ODIN says? You may just have a bad download of the firmware. The full stock firmware contains everything. You should do a full wipe though before flashing in ODIN to get rid of any remnants of fact that your device was rooted. Only thing you can't reset is the Knox counter.
Click to expand...
Click to collapse
This is my 2nd version of firmware and 2 version of odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mycomputerisjunk said:
This is my 2nd version of firmware and 2 version of odin.
Click to expand...
Click to collapse
Use odin v 3.10.7 and report back
Sent from my SM-N920T using Tapatalk

JonathanRAZ said:
Use odin v 3.10.7 and report back
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
That was it. 3.10.7 and the latest firmware was the correct combination.

mycomputerisjunk said:
That was it. 3.10.7 and the latest firmware was the correct combination.
Click to expand...
Click to collapse
Wujiuu your welcome did help glad it did work sir
Sent from my SM-N920T using Tapatalk

Related

[Q] Need Official P6210UELA3/P6210XARLA3/P6210UELA3/P6210UELA3 (XAR) Rom

I factory reset my tab plus because I deleted some system apps which I needed. When I did the setup for the tab, the keyboard did not come up. This is because I deleted all the original keyboard apks and replaced them with a keyboard app from market. When I did the factory reset, the keyboard was deleted and the tab didnt have a keyboard to use.
Now I cant do anything (cant go into market because I cant enter wifi key, dont have any file managers installed and the tab isnt picking my sd card so I cant go into recovery and install zip from sd card!)
Im looking for an original official rom so I can restore it using kies. Kies is saying that my firmware is P6210UELA3/P6210XARLA3/P6210UELA3/P6210UELA3 (XAR)
Here is a screenshot from the about section of settings and its saying that the firmware is P6210UELA1!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please can someone put up the correct rom or a link to it.
Many thanks
Can't you just go back to stock firmware and update again? That's where I'd start
I deleted the keyboards from the system/apps so I can use the tablet but I can only use the stock apps because I cant login to my gmail to activate market!
umz_786 said:
I deleted the keyboards from the system/apps so I can use the tablet but I can only use the stock apps because I cant login to my gmail to activate market!
Click to expand...
Click to collapse
I understand. Have you tried flashing the stock rom with odin or hiemdall and then updating to LA3?
Sent from my GT-P6210 using Tapatalk
Vivified said:
I understand. Have you tried flashing the stock rom with odin or hiemdall and then updating to LA3?
Sent from my GT-P6210 using Tapatalk
Click to expand...
Click to collapse
I would do what Vivified suggested. Go the Dev section and 'Official Firmware' post and look at post #82 (I can't post links yet since I am a noob). Flash it using ODIN and then you can use Keis to update to the latest firmware.
From one Noob to another - Make sure you use the search function and read through all the posts before you go asking for a link.
thanks. all sorted!
wes.harris said:
I would do what Vivified suggested. Go the Dev section and 'Official Firmware' post and look at post #82 (I can't post links yet since I am a noob). Flash it using ODIN and then you can use Keis to update to the latest firmware.
From one Noob to another - Make sure you use the search function and read through all the posts before you go asking for a link.
Click to expand...
Click to collapse
I found the link and downloaded the file. I extracted and it had 2 files: "P6210XARKL1_P6210UEKL1_HOME.tar.md5" and "SS_DL.dll". I am a noob also. Do I use Odin3 v1.85 to flash back to stock? I currently have a GTP6210 with CWM. I would like to get back to stock to get a keyboard that I uninstalled b4 doing a Titanium backup and before CWM backup.
Do you have any suggestions on how to pick the right files? Is there another method to get back to stock?
Many thanks,
PDA: P6210UELA3
Phone: P6210UELA3
CSC: P6210XARLA3
https://hotfile.com/dl/155348910/540f836/GT-P6210_XAR_P6210UELA3_P6210XARLA3_P6210UELA3.zip.html

[Solved] Encryption Unsuccessful after flash cm9 AOSP

[SOLVED]​my phone has been Encryption Unsuccessful
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i've 2 days searching for solution of this problem and i have nothing.
my phone still available in CWM Mode, but when i flashing. it just do bootloop and bootloop agaoin. i try use flash original ROM with odin and don't success.
please anyone help me, i don't have friends again except my fit.
:crying:
Flash old froyo via odin and make a full wipe
Sent from my GT-S5670 using xda app-developers app
fathyle said:
my phone has been Encryption Unsuccessful
i've 2 days searching for solution of this problem and i have nothing.
my phone still available in CWM Mode, but when i flashing. it just do bootloop and bootloop agaoin. i try use flash original ROM with odin and don't success.
please anyone help me, i don't have friends again except my fit.
:crying:
Click to expand...
Click to collapse
Hi! If u r using Odin for the 1st time, then it's obvious that there has been some mistakes. Flash froyo 2.2.1 (4package firmware)of ur country (Indonesia) coz it contains bootloader. If ur phone becomes fine then u can flash Gingerbread 2.3.6 (Indonesian).
Remember: Use Odin 4.38 & ops file should be named like: Beni_v1.0.ops & install Samsung mobile drivers. Disable kies,antivirus & firewall.
Good luck...!!:thumbup:
Galaxy_Rohit said:
Hi! If u r using Odin for the 1st time, then it's obvious that there has been some mistakes. Flash froyo 2.2.1 (4package firmware)of ur country (Indonesia) coz it contains bootloader. If ur phone becomes fine then u can flash Gingerbread 2.3.6 (Indonesian).
Remember: Use Odin 4.38 & ops file should be named like: Beni_v1.0.ops & install Samsung mobile drivers. Disable kies,antivirus & firewall.
Good luck...!!:thumbup:
Click to expand...
Click to collapse
you saved my life bro. thanks alot
fathyle said:
you saved my life bro. thanks alot
Click to expand...
Click to collapse
Ur welcome...
We are talking about the S5670 here, right?
How comes you have an encryption option - what rom are you using?
I use cm 10.1.4 and there is no such option.

please help my s3- problem with network

i installed 4.3 Uruguay, but I lost the network tells me emergency calls only
Knowing I installed modem xxemg4 but still problem .I tried ddemg2 Again still problem after Return to4.1.2
What is the solution؟؟؟
note: the imei Not affected and not changed
please help me
My English is rather weak I hope that I have brought the idea
.............
MOHAMMAD-ALI91 said:
.............
Click to expand...
Click to collapse
Did you OTA upgraded to factory 4.3 or you maually Odin to 4.3?? and then reflash back to stock full 4.1.2 firmware?
MOHAMMAD-ALI91 said:
i installed 4.3 Uruguay, but I lost the network tells me emergency calls only
Knowing I installed modem xxemg4 but still problem .I tried ddemg2 Again still problem after Return to4.1.2
What is the solution؟؟؟
note: the imei Not affected and not changed
please help me
My English is rather weak I hope that I have brought the idea
Click to expand...
Click to collapse
Sounds like you have a different phone model, we don't have a mg4 modem.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Sounds like you have a different phone model, we don't have a mg4 modem.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
galaxy s 3 gt-i9300
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
buhohitr said:
Did you OTA upgraded to factory 4.3 or you maually Odin to 4.3?? and then reflash back to stock full 4.1.2 firmware?
Click to expand...
Click to collapse
i use maually Odin to 4.3 ? then i reflash 4.1.2
MOHAMMAD-ALI91 said:
i use maually Odin to 4.3 ? then i reflash 4.1.2
Click to expand...
Click to collapse
You're in the Verizon s3 forum, ask this question in the i9300 forum, the phones are completely different.
Sent from my SCH-I535 using Tapatalk 2
MOHAMMAD-ALI91 said:
i use maually Odin to 4.3 ?
Click to expand...
Click to collapse
And you manually Odin to 4.1.2 with full firmware?? It's not possible to downgrade...Anyway, try to Odin again with PIT file and full factory firmware. Also make a backup of the IMEI folder before you do it. http://forum.xda-developers.com/showthread.php?t=1804117
If still not working you need to replace your SIM card(free from your provider) and call your provider to reprovision the card, just like when you first brought the phone.

[Q] Samsung Galaxy Infuse (sgh-i997) CWM Issues

Good Evening/Hello/Hi,
I own a sgh-i997 and I am running stock firmware (Froyo 2.2), rooted and bootloader unlocked. I was attempting to update to KitKat 4.4, I succeded in installing 2013.04.30-CWM-Synthesis-1.2Ghz.zip Kernel with SGS kernel flasher and that installed CWM, then I attempted to flash CWM flashable EFS to backup my IMEI. Then I installed the CM9 (ICS) rom and when I rebooted the phone and went into CWM i encountered this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and now CWM is useless, I cannot use it to flash another room or even get into ADB mode to use ODIN.
Hope you guys can help me.
Thank You.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Campos_Kill said:
Good Evening/Hello/Hi,
I own a sgh-i997 and I am running stock firmware (Froyo 2.2), rooted and bootloader unlocked. I was attempting to update to KitKat 4.4, I succeded in installing 2013.04.30-CWM-Synthesis-1.2Ghz.zip Kernel with SGS kernel flasher and that installed CWM, then I attempted to flash CWM flashable EFS to backup my IMEI. Then I installed the CM9 (ICS) rom and when I rebooted the phone and went into CWM i encountered this
and now CWM is useless, I cannot use it to flash another room or even get into ADB mode to use ODIN.
Hope you guys can help me.
Thank You.
Click to expand...
Click to collapse
This:
mrkhigh said:
You have the wrong boot loader installed... Flash back to stock using heimdal one click then update to ICS then jb then kitkat.
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Curious if you can use the unbrick (via Odin) instead (to get you to Gingerbread as well), but the above would be a good starting point nonetheless
joel.maxuel said:
This:
Curious if you can use the unbrick (via Odin) instead (to get you to Gingerbread as well), but the above would be a good starting point nonetheless
Click to expand...
Click to collapse
Ok, thanks I'll try that today
HELP::::roblem loading CWM Recovery:
Firmware: 2.3.6
BaseBand: I997UCLB1
Kernel: 2.6.35.7-I997UCLB1-CL954414
Build Number: GINGERBREAD.UCLB1
@Sahir said:
Firmware: 2.3.6
BaseBand: I997UCLB1
Kernel: 2.6.35.7-I997UCLB1-CL954414
Build Number: GINGERBREAD.UCLB1
Click to expand...
Click to collapse
Did the above unbrick work? If having problems finding a download, need not look far.
joel.maxuel said:
Did the above unbrick work? If having problems finding a download, need not look far.
Click to expand...
Click to collapse
Yes it works...!!

New ota update B190

Ok Have my phone unlocled rooted and TWRP installed want to install new update for the life of me cant remember the steps i did the last time getting old lol think ill print them out this time! i know i need recovery img for b183 and public and hw-usa files to update do the files change for each update and if so could some one post them and the B183 recovery.img and then the steps to follow to update i know i need to boot the recovery file install superroot and flash the 2 files but want to make sure thanks for the help and patience!!!!!
What firmware version are you on? Mine came to my phone and I applied it, didn't have to flash it. I rebranded to C567B183.
Sent from my MHA-L29 using Tapatalk
70challenger said:
What firmware version are you on? Mine came to my phone and I applied it, didn't have to flash it. I rebranded to C567B183.
Sent from my MHA-L29 using Tapatalk
Click to expand...
Click to collapse
Im on B183 but B190 is on my phone asking me to restart but if i do wont i loose root and twrp that i have installed ? Thx
You aren't giving me all the digits but I assume you are using C567. I don't believe so and if I need can always re-root and flash again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MHA-L29 using Tapatalk
Sorry im on C567B183 and yes i can reroot and flash will i need new public and usa files i not sure when those files update thanks again
same situation here only I'm in on MHA-L29C567B183, Rooted w/TWRP recovery. I'm also on a RomAur ROM.
Sent from my MHA-L29 using Tapatalk
larryblynn000 said:
Sorry im on C567B183 and yes i can reroot and flash will i need new public and usa files i not sure when those files update thanks again
Click to expand...
Click to collapse
I just checked and my device is not rooted anymore. You would need to go through the root process again. I suggest the rebranding instructions post.
Sent from my MHA-L29 using Tapatalk
ok thx but do i need to find new public and usa files after flashing or can i use the old ones also would klike to find B183 recovery image file thanks
Get the new one to be safe.
Sent from my MHA-L29 using Tapatalk

Categories

Resources